Light ion irradiation effects on stuffed Lu2(Ti2−xLux)O7−x/2 (x = 0, 0.4 and 0.67) structures

We have recently synthesized “stuffed” (i.e., excess Lu) Lu₂(Ti_2−xLu_x)O_7−x/2 (x = 0, 0.4 and 0.67) compounds using conventional ceramic processing. X-ray diffraction measurements indicate that stuffing more Lu³⁺ cations into the oxide structure leads eventually to an order-to-disorder (O-D) transition, from an ordered pyrochlore to a disordered fluorite crystal structure. At the maximum deviation in stoichiometry (x = 0.67), the Lu³⁺ and Ti⁴⁺ ions become completely randomized on the cation sublattices, and the oxygen “vacancies” are randomized on the anion sublattice. Samples were irradiated with 400 keV Ne²⁺ ions to fluences ranging from 1 × 10¹⁵ to 1 × 10¹⁶ ions/cm² at cryogenic temperatures (∼77 K). Ion irradiation effects in these samples were examined by using grazing incident X-ray diffraction. The results show that the ion irradiation tolerance increases with disordering extent in the non-stoichiometric Lu₂(Ti_2−xLu_x)O_7−x/2.     

Structural characterization of Nd-doped Hf-zirconolite Ca1−xNdxHfTi2−xAlxO7 ceramics

Because of its high incorporation capacity and of the high thermal neutron capture cross-section of hafnium, Hf-zirconolite (CaHfTi₂O₇) ceramic can be envisaged as a potential waste form for minor actinides (Np, Am, Cm) and plutonium immobilization. In this work, Nd-doped Hf-zirconolite Ca_1−xNd_xHfTi_2−xAl_xO₇ (x = 0; 0.01 and 0.2) ceramics have been prepared by solid state reaction. Neodymium has been used as trivalent actinide surrogate. The ceramic samples structure has been studied by X-ray diffraction and refined by the Rietveld method. This revealed that Nd³⁺ ions only enter the Ca site, whereas part of Hf⁴⁺ ions substitute titanium into Ti(1) sites and Al³⁺ ions mainly occupy the Ti(2) split sites and Ti(3) sites of the zirconolite structure. Using various spectroscopic techniques (electron spin resonance, optical absorption and fluorescence), the environment of Nd³⁺ cations in Hf-zirconolite has been studied and compared with that of Nd³⁺ cations in Zr-zirconolite (CaZrTi₂O₇). Different local environments of Nd³⁺ cations have been detected in Hf-zirconolite that can be attributed to the existence of an important disorder around Nd in the Ca site probably due to the statistical occupancy of the next nearest cationic site of neodymium (a split Ti site) by Ti⁴⁺, Al³⁺ cations and vacancies. No significant differences were observed concerning Nd³⁺ cations environment and distribution in Hf- and Zr-zirconolite ceramics.     

Effects of ion irradiation on the mechanical properties of SiNawOxCyHz sol-gel derived thin films

A study of the effects of ion irradiation of hybrid organic/inorganic modified silicate thin films on their mechanical properties is presented. NaOH catalyzed SiNa_wO_xC_yH_z thin films were synthesized by sol-gel processing from tetraethylorthosilicate (TEOS) and methyltriethoxysilane (MTES) precursors and spin-coated onto Si substrates. After drying at 300 °C, the films were irradiated with 125 keV H⁺ or 250 keV N²⁺ at fluences ranging from 1 × 10¹⁴ to 2.5 × 10¹⁶ ions/cm². Nanoindentation was used to characterize the films. Changes in hardness and reduced elastic modulus were examined as a function of ion fluence and irradiating species. The resulting increases in hardness and reduced elastic modulus are compared to similarly processed acid catalyzed silicate thin films.     

Thermal studies on fluorite type ZryU1−yO2 solid solutions

Solid state reactions of UO₂ and ZrO₂ in mild oxidizing condition followed by reduction at 1673 K showed enhanced solubility up to 35 mol% of zirconium in UO₂ forming cubic fluorite type Zr_yU_1−yO₂ solid solution. The lattice parameters and O/M (M = U + Zr) ratios of the solid solutions, Zr_yU_1−yO_2+x, prepared in different gas streams were investigated. The lattice parameters of these solid solutions were expressed as a linear equation of x and y: a₀ (nm) = 0.54704 − 0.021x - 0.030y. The oxidation of these solid solutions for 0.1 ? y ? 0.2 resulted in cubic phase MO_2+x up to700 K and single orthorhombic zirconium substituted α-U₃O₈ phase at 1000 K. The kinetics of oxidation of Zr_yU_1−yO₂ in air for y = 0-0.35 were also studied using thermogravimetry. The specific heat capacities of Zr_yU_1−yO₂ (y = 0-0.35) were measured using heat flux differential scanning calorimetry in the temperature range of 334-860 K.     

Electronic stopping dependence of ion beam induced modifications in GaN

We report here Swift heavy ion induced effects in GaN samples grown by metal organic chemical vapor deposition (MOCVD) technique. These samples were irradiated with 80 MeV Ni and 100 MeV Ag ions at a fixed fluence of 1 × 10¹³ ions/cm². Ion species and energies are chosen such that the difference in their electronic energy loss (S_e) would be 8 keV/nm. Effects of Ag on structural and optical properties over Ni ions have been discussed extensively. We employed different characterization techniques like High Resolution X-ray Diffraction (HRXRD) and Raman Spectroscopy for defect density calculations and for vibrational modes, respectively. Defect densities are calculated and compared using Williamson-Hall method from HRXRD. Change of strain and vibrational modes with S_e has been discussed.     

The use of HI-ERDA/RBS and NRA/RBS to depth profile N in GaAs1−xNx thin films

N profiles of several GaAs_1−xN_x epitaxial layers with different N mole fractions in the range 0 < x < 0.14 were obtained by using (1) heavy-ion elastic recoil detection analysis (HI-ERDA) along with Rutherford backscattering spectrometry (RBS) using a 35 MeV Si⁶⁺ beam, and (2) nuclear reaction analysis (NRA) with the ¹⁴N(α, p)¹⁷O reaction, also with RBS, using a 3.7 MeV ⁴He⁺ beam. The results from the two techniques are compared and the advantages, disadvantages and capabilities are discussed.     

Thermodynamic properties of ThxU1−xO2 (0 < x < 1) based on quantum-mechanical calculations and Monte-Carlo simulations

Th_xU_1−xO_2+y binary compositions occur in nature, uranothorianite, and as a mixed oxide nuclear fuel. As a nuclear fuel, important properties, such as the melting point, thermal conductivity, and the thermal expansion coefficient change as a function of composition. Additionally, for direct disposal of Th_xU_1−xO₂, the chemical durability changes as a function of composition, with the dissolution rate decreasing with increasing thoria content. UO₂ and ThO₂ have the same isometric structure, and the ionic radii of 8-fold coordinated U⁴⁺ and Th⁴⁺ are similar (1.14 nm and 1.19 nm, respectively). Thus, this binary is expected to form a complete solid solution. However, atomic-scale measurements or simulations of cation ordering and the associated thermodynamic properties of the Th_xU_1−xO₂ system have yet to be determined. A combination of density-functional theory, Monte-Carlo methods, and thermodynamic integration are used to calculate thermodynamic properties of the Th_xU_1−xO₂ binary (ΔH_mix, ΔG_mix, ΔS_mix, phase diagram). The Gibbs free energy of mixing (ΔG_mix) shows a miscibility gap at equilibration temperatures below 1000 K (e.g., E_exsoln = 0.13 kJ/(mol cations) at 750 K). Such a miscibility gap may indicate possible exsolution (i.e., phase separation upon cooling). A unique approach to evaluate the likelihood and kinetics of forming interfaces between U-rich and Th-rich has been chosen that compares the energy gain of forming separate phases with estimated energy losses of forming necessary interfaces. The result of such an approach is that the thermodynamic gain of phase separation does not overcome the increase in interface energy between exsolution lamellae for thin exsolution lamellae (10 Å). Lamella formation becomes energetically favorable with a reduction of the interface area and, thus, an increase in lamella thickness to >45 Å. However, this increase in lamellae thickness may be diffusion limited. Monte-Carlo simulations converge to an exsolved structure [lamellae || ] only for very low equilibration temperatures (below room temperature). In addition to the weak tendency to exsolve, there is an ordered arrangement of Th and U in the solid solution [alternating U and Th layers || {1 0 0}] that is energetically favored for the homogeneously mixed 50% Th configurations. Still, this tendency to order is so weak that ordering is seldom reached due to kinetic hindrances. The configurational entropy of mixing (ΔS_mix) is approximately equal to the point entropy at all temperatures, indicating that the system is not ordered.     

Desorption of gold nanoclusters (2-30 nm) under low excitation of their electronic subsystem by Ar ions (14 keV/nm)

Gold nanodispersed targets with islands-grains sized 2-30 nm were irradiated by Ar⁷⁺ ions with the energy of 45.5 MeV and (dE/dx)_e = 14.2 keV/nm in gold. The desorbed gold nanoclusters were studied by TEM method. For all the targets desorption of intact gold nanoclusters is observed. However, for inelastic stopping of monatomic Ar ions in gold of 14.2 keV/nm desorption of nanoclusters is observed only up to ∼25 nm. The yield of the desorbed nanoclusters considerably decreases from 3 to 0.02 cluster/ion with the increase of the mean size of the desorbed nanoclusters from 3 to 14.2 nm. The results are discussed.     

Oxygen potential measurements of Am0.5Pu0.5O2−x by EMF method

The dependence of the oxygen potentials on oxygen non-stoichiometry and temperature of Am_0.5Pu_0.5O_2−x has been obtained by the electromotive force (EMF) method with the cell: (Pt) air |Zr(Ca)O_2−x| Am_0.5Pu_0.5O_2−x (Pt). The x value of Am_0.5Pu_0.5O_2−x was changed at 1333 K over 0.02 < x ? 0.25 by the coulomb titration method. The temperature dependence of the oxygen potential was also measured over the range of 1173-1333 K. It was found that the oxygen potential decreased from −80 to −360 kJ mol⁻¹ with increasing x from 0.021 to 0.22 at 1333 K and that it remained almost constant at −360 kJmol⁻¹ around x = 0.23. It was concluded that Am_0.5Pu_0.5O_2−x should be composed of the single fluorite-type phase over 0.02 < x ? 0.22 and the mixed phases of fluorite-type and (Am, Pu)₉O₁₆ at around x = 0.23.     

Desorption of gold nanoclusters from gold nanodispersed targets by 200 keV Au5 polyatomic ions in the elastic stopping mode: Experiment and molecular-dynamics simulation

Au nanoislet targets (∅ 2-60 nm) were bombarded by 200 keV polyatomic ions (40 keV/atom), which deposit their energy mainly in the nuclear stopping mode: ∑(dE/dx)_n = 30 keV/nm and ∑(dE/dx)_e = 2 keV/nm. The matter desorbed in the form of nanoclusters was registered by TEM. The total transfer of matter was determined by neutron-activation analysis. The total yield of the ejected gold reached high values of up to 2.6 × 10⁴ atoms per Au₅ ion. The major part (2 × 10⁴ atoms per ion Au₅) of the emission is in the form of nanoclusters. The results are compared with the data of similar experiments with 1 MeV Au₅ (200 keV/atom) and other projectiles. The analysis of the experimental data and the comparison to molecular-dynamics simulation results of the desorption process show that the desorption of Au nanoislets is induced by their melting, build-up of pressure and thermal expansion.     

Swelling and optical properties of Si3N4 films irradiated in the electronic regime

Silicon nitride layers of 140 nm thickness were deposited on silicon wafers by low pressure chemical vapour deposition (LPCVD) and irradiated at GANIL with Pb ions of 110 MeV up to a maximum fluence of 4 × 10¹³ cm⁻². As shown in a previous work these irradiation conditions, characterized by a predominant electronic slowing-down (S_e = 19.3 keV nm⁻¹), lead to damage creation and formation of etchable tracks in Si₃N₄. In the present study we investigated other radiation-induced effects like out of plane swelling and refractive index decrease. From profilometry, step heights as large as 50 nm were measured for samples irradiated at the highest fluences (>10¹³ cm⁻²). From optical spectroscopy, the minimum reflectivity of the target is shifted towards the high wavelengths at increasing fluences. These results evidence a concomitant decrease of density and refractive index in irradiated Si₃N₄. Additional measurements, performed by ellipsometry, are in full agreement with this interpretation.     

Optical properties of InxGa1−xP/InP grown at high fluence Ga implantation on InP using focused ion beam

Single-crystalline InP(1 0 0) substrate was implanted by 30 keV Ga⁺ ions with fluences of 1 × 10¹⁶-1.5 × 10¹⁷ cm⁻² followed by post-annealing treatment at 750 °C to recover implantation-induced structural defects and activate dopants into the lattices. The optical property, composition, and microstructure of the Ga⁺-implanted InP were studied by Raman spectroscopy and transmission electron microscopy (TEM). Raman spectra show that the In_xGa_1−xP phase is formed at a critical fluence of 7 × 10¹⁶ cm⁻². The newly grown phase was identified with the appearance of Ga rich TO_InP and In rich TO_GaP modes of a random alloy in the 1 bond-2 phonon mode configuration along with TEM structural identification.     

Improvement on thermoelectric properties of multilayered Si1−xGex/Si by ion beam bombardment

We made n-type nano-scale thin film thermoelectric (TE) devices that consist of multiple periodic layers of Si_1−xGe_x/Si. The period is about 10 nm. The structure was modified by 5 MeV Si ion bombardment that formed a nano-scale cluster structure. In addition to the effect of confinement of the phonon transmission, formation of nanoclusters by the ionization energy of incident MeV Si ions further increases the scattering of phonons, increasing the chance of inelastic interaction of phonons, resulting in more annihilation of phonons. This limits phonon mean free path. Phonons are absorbed and dissipated along the layers rather than in the direction perpendicular to the layer interfaces, therefore cross plane thermal conductivity is reduced. The increase of the density of electronic states due to the formation of nanocluster minibands increases the cross plane Seebeck coefficient and increases the cross plane electric conductivity of the film. Eventually, the thermoelectric figure of merit of the TE film increases.     

Crystal structure change of Li2+xTiO3+y tritium breeder under moist air

To investigate the aging behavior of Li_2+xTiO_3+y, the materials Li_2.0TiO_3+y, Li_2.2TiO_3+y and Li_2.4TiO_3+y were stored under moist air at ambient temperature. Under these conditions the weight of Li_2.0TiO_3+y increased by only 1% in 100 days, which provides evidence for the high chemical stability of Li₂TiO₃. In comparison, under the same storage conditions the weights of Li_2.2TiO_3+y and Li_2.4TiO_3+y increased by 14% and 18%, respectively. The observed weight gain is attributed to the uptake of water, and to the reaction of a by-product of Li_2+xTiO_3+y with water and carbon dioxide. The weight gain curves were evaluated by the Jander equation. From the analysis, it was possible to obtain the diffusion coefficient of water through Li₂TiO₃ particles at ambient temperature. The determined value was 2 × 10⁻¹⁷ m²/s.     

Influence on the structural characteristic of defect solid solution GdxZr1−xO2−x/2 with 0.18 ? x ? 0.62 under longer term annealing studied by Gd Mössbauer spectroscopy

Three kinds of defect solid solution Gd_xZr_1−xO_2−x/2 with 0.18 ? x ? 0.62, including the three single crystal samples with x = 0.21, 0.26 and 0.30, were investigated by ¹⁵⁵Gd Mössbauer spectroscopy at 12 K. Difference in the structural characteristic under longer term annealing were confirmed by comparing the ¹⁵⁵Gd Mössbauer parameters of the polycrystalline samples sintered one time and twice at 1773 K for 16 h in air, respectively. The results indicated that the polycrystalline samples sintered twice have relatively equilibrated structure by comparing with the three single crystal samples. After being sintered twice, basically the local structure around the Gd³⁺ ions does not change, but the degree of the displacements of the six 48f oxygen ions from positions of cubic symmetry becomes slightly smaller, and distribution of the Gd³⁺ ions in the system becomes more homogeneous.     

Irradiation damage of uridine molecules with MeV heavy ions

In order to study the mechanism of the nucleotide directly damaged by energetic heavy ions, the residual ratio of uridine molecules after irradiation was measured by means of High Performance Liquid Chromatography (HPLC). The experimental results show that the irradiation damage probability depends on the electronic energy loss rate (S_e) of incident ions: first it increases quickly with S_e, then becomes stable when S_e reaches 800 eV/nm. The contribution of the nuclear collisions can be neglected compared with that of the electronic process. This is not only because that the nuclear energy loss rate (S_n) is much smaller than S_e for MeV heavy ions, but also because the energy deposition through the electronic process is more efficient in damaging molecules than through the nuclear process.     

New local model for electronic energy loss and its application to computer simulations of channeling

We used the average of the Thomas-Fermi (TF) electron distribution instead of that of Hartree-Fock (HF) electron distribution as the screening length of an isolated atom. Based on the Firsov theory, we proposed a new Firsov formula of the electronic energy loss which has a simple form ΔE_e(E, b) ∞ S_e(E) exp(γb)/(1 + βb)⁶, where S_e(E) is the electronic stopping cross section, b = p/a, p and a are the impact parameter and the screening length, respectively, and β and γ are the fitting parameters. Using the present screening lengths with the shell effect and the new Firsov formula, the depth distributions of channeling were simulated by the ACOCT code for 20 keV B⁺ ions impinging along the [1 1 0] channel direction of silicon (1 1 0) surface. The ACOCT depth profiles of channeling using the new Firsov (solid) local model for the AMLJ potential are in good agreement with the experimental ones.     

Study of H loss from hydrogenated Hg1−xCdxTe under high electronic excitation by elastic recoil detection analysis (ERDA)

Large erosion (∼1.1 × 10⁴ atoms/ion) of H from hydrogenated MCT wafers is observed due to the bombardment with 80 MeV Ni⁹⁺ ions. The initial H areal concentration and hydrogen depletion rate is monitored by elastic recoil detection analysis. The ion-damaged zones from where depletion of H takes place have been calculated from fluence-dependent hydrogen areal content analysis. The results are explained on the basis of the thermal spike model of ion-solid interaction.     

Formation of planar waveguide in BiB3O6 crystal by MeV carbon implantation

Non-leaky planar waveguide structure has been fabricated in x-cut BiB₃O₆ crystal by 6 MeV C³⁺ ion implantation at a dose of 1 × 10¹⁴ ions/cm². The effective refractive indices of the waveguide are measured at a wavelength of 632.8 nm. We perform a computer code based on the finite difference method to reconstruct the refractive index profiles of n_x and n_y of this waveguide. The beam propagation method is used to calculate the electric and magnetic field profiles in the waveguide region from the reconstructed refractive index profiles. Our simulated data show that the refractive index increased waveguide layer can confine the mode completely.     

Eutectic crystallization in the FeO1.5-UO2+x-ZrO2 system

Results of the investigation of the FeO_1.5-UO_2+x-ZrO₂ system in air are presented. The eutectic position and the content of the phases crystallized at this point have been determined. The temperature and the composition of the ternary eutectic are 1323 ± 7 °С and 67.4 ± 1.0 FeO_1.5, 30.5 ± 1.0 UO_2+x, 2.1 ± 0.2 ZrO₂ mol.%, respectively. The solubilities of FeO_1.5 and ZrO₂ in the UO_2+x(FeO_1.5, ZrO₂) solid solution correspond to respectively 3.2 and 1.1 mol.%. The solubilities of UO₂ and ZrO₂ in FeO_1.5 are not significant. The existence of a solid solution on the basis of U(Zr)FeO₄ compound is found. The ZrO₂ solubility in this solid solution is 7.0 mol.%.