一种共面波导结构双模圆环带通滤波器

提出了一种新型的用共面波导馈线结构实现的双模圆环带通滤波器。该滤波器采用传统的圆环作为谐振器,引入阶梯阻抗作为微扰使其简并模式分离并产生耦合。这样的微扰结构我们称之为环形阶跃阻抗谐振器,它与输入/输出共面波导分别设计在介质基片的两个不同的面上。文中给出了该滤波器的结构及通过仿真和实验获得的性能参数,结果表明该滤波器在带宽为11.4%时通带内的最小插损为1.42dB。     

一种共面波导结构双模方形贴片带通滤波器

提出一种新型共面波导(CPW)结构双模方形贴片带通滤波器。该滤波器采用方形贴片作为谐振器,在方形贴片的两个对称的角上开两个相同的方形切角作为微扰使其简并模式分离并产生耦合,贴片与输入/输出CPW分别设计在介质基板的两个不同的面上。文中给出了该滤波器的结构以及通过仿真和实验获得的性能参数,结果表明该滤波器的通带带宽可在4.9%到7.4%的范围内调节,通带内的最小插入损耗为1.85dB。     

Aperture-Miniaturized Antenna Loaded with Split Ring Resonator Array

In this letter, a novel antenna with a miniaturized aperture is proposed. The substrate including a split-ring resonator array is inserted into a size-reduced open-ended waveguide. For a low return loss and high radiation efficiency, the ring arrangement is optimized, and a stepped transition using H-plane discontinuity is proposed. The proposed antenna achieves a 70% aperture reduction compared to a conventional standard waveguide antenna of WR-187 (47.6 mm×22.2 mm). The return loss drops significantly at three frequencies, and a reasonable gain is achieved. The aperture-miniaturized antenna can be used in many antenna applications such as near-field measurement.     

A Novel Tri-Band Bandpass Filter Incorporating Stub Loaded Resonator and DGS Resonator

给出了一种采用枝节加载谐振器和缺陷地面结构实现的三通带滤波器。枝节加载谐振器采用 交趾耦合实现了工作于2.45 GHz和5.25 GHz的两个通带,利用缺陷地面结构实现了 工作于3.5 GHz的另一个通带,3个通带实现了独立设计。基于该方法,设制作了一个工 作于2.45 GHz、3.5 GHz和5.25 GHz 3个无线通信频段的三通带滤波器。实测 和仿真结果对比验证了设计方法的有效性。     

宽阻带三模谐振器微带带通滤波器设计

介绍了一种新颖的微带三模谐振器,由该谐振器构成的微带滤波器具有较宽的通带以及较好的带外抑制。对传统的单模微带环形谐振器结构进行优化,使谐振器在通带内具有三个谐振点,并且在通带边缘有四个对称衰减极点。引入的阶梯阻抗谐振单元使得微带三模谐振器具有良好的带外抑制。依据传输线原理对宽阻带三模谐振器进行了分析,并完成了中心频率为1090 MHz的宽阻带带通滤波器设计和加工,其实际测试结果与软件仿真结果具有良好的一致性。     

Miniature CPW Parallel-Coupled Bandpass Filter Based on Inductive Loaded Coupled-Lines and Lumped-Element J-Inverters

This study presents a compact coplanar-waveguide (CPW) parallel-coupled bandpass filter (BPF) with good selectivity and stopband rejection. The inductive terminations are introduced to the conventional anti-parallel coupled-lines, and lumped-element J-inverters are employed, to achieve both size reduction and spurious suppression. Additionally, the inductive cross-coupling effect is introduced to obtain two transmission zeros to enhance the selectivity. Suitable equivalent-circuit model is also established as effective design tool. Specifically, this work demonstrates a compact cross-coupled fourth-order BPF in grounded-CPW configuration. Compared to the conventional filters, the proposed filters exhibit over 65% size reduction, improved selectivity, and wider stopbands up to four times the center frequency     

Miniaturized Dual-Mode Ring Resonator Bandpass Filter With Microstrip-to-CPW Broadside-Coupled Structure

A microstrip-to-coplanar waveguide broadside-coupled section is used to replace a 34-section of the conventional dual-mode 1-ring resonator filter for circuit area miniaturization. It is believed that it is a new idea to incorporate the broadside-coupled section into a ring resonator filter for size reduction. For design purpose, some important characteristics of the broadside-coupled lines are investigated. In experiments, two realized circuits show only 19.4% of the area of a uniform ring. Measured responses show good agreement with simulation.     

Conformal Band Notched Circular Monopole Antenna Loaded with Split Ring Resonator

This article presents the design and analysis of conformal circular monopole antenna with split ring resonator to get frequency notch characteristics in the wideband. Split ring resonators placed on one side of the substrate and complementary split ring resonators placed on the other side of the substrate at defected ground structure, which yields the frequency notch characteristics with respect to the microstrip feeding. Dual notch band characteristics are obtained between 4–4.3 and 7.3–8.1 GHz. The analyzed conformal characteristic of the antenna supports excellent constant reflection coefficient characteristics over the band at different angles. The impedance and radiation characteristics of the antenna model is analysed in simulation along with unit cell analysis of the SRR and the measured results are providing good agreement with them.     

互补开口谐振环宽带带通滤波器的仿真设计

基于互补开口谐振环结构谐振特性,采用级联结构扩展带宽,设计了一种结构小的宽带带通滤波器,并通过HFSS软件仿真滤波器的谐振特性.仿真结果显示,滤波器具有较好的通带性能,其带外抑制度也比较高.     

Quarter-Wavelength Side-Coupled Ring Resonator for Bandpass Filters

This paper deals with a dual-mode ring resonator fed by quarter-wavelength side-coupled lines. The resonator synthesis was developed so as to fix the central frequency, bandwidth, and transmission zeros frequencies, as well as the insertion loss in the passband. Based on this resonator, several bandpass filters were designed, which include the cascaded rings and the combination of such ring resonator with coupled line sections. Simulations are proposed throughout the paper to illustrate the various possibilities offered by the concept. The filters' experimental results in microstrip technology are also presented to validate the idea.     

An Extended Doublet Substrate Integrated Waveguide (SIW) Bandpass Filter With a Complementary Split Ring Resonator (CSRR)

An “extended doublet” bandpass filter (BPF) is proposed using a substrate integrated waveguide (SIW) cavity with a complementary split ring resonator (CSRR) etched on its top metal plane. Thus, a single-layer BPF with two transmission zeros is realized successfully, with no additional area or layers occupied. The measured and simulated S-parameters of the filter are presented to show its predicted performance, with good agreements obtained between them.      

60-GHz Band Dual-Mode Microstrip Ring Resonator Bandpass Filter Using Micromachining Technology

A new compact millimeter-wave dual-mode ring resonator bandpass filter is proposed. This filter has a 15% bandwidth at 58 GHz with 3.4 dB insertion loss. Input/output lines and ring resonator are directly connected to obtain tight coupling, and an open-end stub is inserted for dual-mode operation. This filter is fabricated on a GaAs wafer by using MEMS technology and can be applied for the millimeter- wave SoC.     

A Novel Dual-Mode Dual-Band Bandpass Filter Based on a Single Ring Resonator

A dual-mode dual-band bandpass filter with two transmission poles in both passbands using a single ring resonator is proposed. Two excited ports are placed at the 135$^{circ}$ -separated positions along the ring resonator and coupled with the ring via parallel-coupled lines, leading to synchronous excitation of two transmission poles in dual passbands. After the principle of this initial filter is described, an improved ring resonator with periodic loading of open-circuited stubs is constructed and studied to achieve compact size and adjustable spacing between the two passbands. Finally, a dual-band ring resonator filter with center frequencies at 2.4 and 5.8 GHz is designed and fabricated. Measured results verify the design principle.      

支节加载双模带通滤波器设计

阶梯阻抗谐振器高低阻抗微带线直线连接,实现输入输出强耦合需要减小和方形环双模谐振器之间的耦合距离,距离过小会造成实物加工困难。为此,提出了高低阻抗微带线垂直连接且在连接处输入输出的方式,使高低阻抗微带线都能与方形环谐振器耦合,且输入和输出也能耦合,加大了阶梯阻抗谐振器和方形环谐振器的耦合以及输入和输出的直接耦合。仿真结果表明,该方法在提高滤波器性能的同时减小了电路尺寸。     

一种新型开路环谐振带通滤波器

利用开路环终端的内部电容耦合效应,提出一种结构紧凑,具有小型化和良好的二阶和三阶谐波抑制能力的开路环谐振器窄带带通滤波器.分析了开路环终端电容内部耦合结构变化对带通滤波器谐波抑制特性的影响,并利用上述结构仿真和设计了一个中心频率为1.5 GHz的带通滤波器,模拟结果与实验结果吻合良好,验证了滤波器的设计思想.     

基于半模基片集成波导互补开环谐振器的新型滤波器研究

一种新型的基于半模基片集成波导（HMSIW）表面上开互补谐振环高性能平面滤波器。该结构允许低于截止频 率以下传输正向波,利用具有高通特性的HMSIW 和CSRR 组成具有带通特性的滤波器,该滤波器具有体积小巧,损耗 低,易制作,并方便与其他电路集成等优势     

Compact Bandpass Ring Resonator Filter With Enhanced Wide-Band Rejection Characteristics Using Defected Ground Structures

This letter addresses a modified bandpass ring resonator filter providing compact size, low insertion-loss, wide bandwidth, sharp rejection, and suppressed higher order modes. It is demonstrated that the use of internal folded stubs translates into an overall size reduction of more than 70% through the exploitation of the internal ring area. The introduction of defected ground structures enhances the rejection of higher order modes beside offering a further advantage in terms of size reduction. It is furthermore shown that electromagnetic simulations, transmission line model, as well as measurement results are in very good agreement.      

基于互补分裂谐振环的零阶谐振微带带通滤波器的设计

文章介绍了以互补分裂谐振环和一系列沟道组成的LHM为单元的零阶谐振系统（ZOR）,并给出了此系统共振频率和导纳斜率参数的确定方法。描述了由带有J－变案频器的ZOR组成的带通滤波器的设计方法。     

可调微带矩形环带通滤波器

给出了一种可调微带矩形环带通滤波器的仿真和实验结果。在微带矩形环谐振器内加载折线路径,利用PIN管的导通断开状态获得不同的谐振长度,从而实现在2.5GHz和5.2GHz两个频段上带通滤波器的电控切换。PIN管开关正向导通时,在电路中等效于一个电阻,带通滤波器工作的中心频率为5.2GHz,带宽1.2GHz,插入损耗1.08dB;开关断开时,在电路中等效于一个电容,滤波器通带工作频率约为2.5GHz,带宽10MHz,插入损耗为1.99dB。