Preparation and characterization of pullulan–chitosan and pullulan–carboxymethyl chitosan blended films

The characteristics of pullulan–chitosan and pullulan–carboxymethyl chitosan (CMCH) blended films were investigated. The viscosity of the film-forming solutions, mechanical properties, barrier properties (water and oxygen), water solubility, and color are reported. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) measurements were used to study the interactions and compatibility between the polysaccharides. The addition of the chitosan or CMCH to pullulan effectively modified the mechanical and oxygen barrier property of the film. The improvements in the film properties have been related to strong interactions between chitosan/CMCH and pullulan polymers, which were observed with FTIR spectroscopy. The ratio of pullulan and chitosan to achieve films with optimum mechanical properties, oxygen and water barrier properties was identified to be 1:1. Increased concentrations of chitosan lead to the formation of inter-molecular hydrogen bonds rather than the intra-molecular hydrogen bonds which were suggested from XRD measurements.     

Coir Fiber–Process and Opportunities

Abstract

Growing environmental awareness throughout the world has triggered a paradigm shift towards designing materials compatible with the environment. Coira lignocelluosic natural fiberhas emerging importance as an engineering material due to its high tensile strength and elongation properties. The advantages of natural lignocellulosic fibers include acceptable specific strength properties, low cost, low density and biodegradability. This work is intended to present an overview of the main results presented in literature on this topic, focusing the attention on the fiber properties in terms of physical and chemical structure. Some aspects related to the traditional uses of coir fibers are also presented. Coir, as an ecofriendly fiber, has tremendous potential in India as well as the rest of the World for mattresses, fabric and other novel applications. Research and development efforts have been underway to find new use areas for coir.     

Solutions properties and solute–solvent interactions in ternary sugar–salt–water solutions

Viscometric constants were used to provide information on solute–solvent interactions in ternary water–sugar–salt solutions. Comparison was made between pure water and aqueous salt solution as solvents affecting the behaviour of small carbohydrates. The determination of intrinsic viscosity was made more accurate by applying triple extrapolation of the three equations (Huggins, Kramer and Meffroy-Biget). Results obtained with this triple extrapolation method were compared to that obtained with the Jones–Dole equation usually used. The B coefficient of the Jones–Dole equation was interpreted in terms of its components (B_size) and (B_structure), respectively assigned to the hydrodynamic volume and the contribution to solvent structural change. The determination of the apparent molar volumes in pure water enabled calculation of the hydration numbers. The determined apparent molar volumes of the studied sugars in aqueous salt solutions suggested a dehydration of the sugars explained by sugar–salt interactions. The most important perturbations observed in LiCl solutions compared to those in NaCl solutions were explained by LiCl being surrounded with more water molecules.     

Dioxins,furans and non-ortho-PCBs in Canadian total diet foods 1992–1999 and 1985–1988

In the period from 1985 to 1999, about 600 samples of total diet foods from Canadian cites were analysed for dioxins, furans and non-ortho-PCBs. Toxic equivalent (TEQ) concentrations on a lipid basis were found to be the highest in dairy and beef products followed by poultry and pork. These levels decreased over the 15-year period of sampling, particularly those for fluid milk, less so for poultry and pork and little or no change for beef. Calculation of the human daily intake for the years 1985–1988 showed values a little less than 1?pg of TEQ₂₀₀₅ polychlorinated dibenzo-p-dioxin/polychlorinated dibenzofuran per kg body weight, falling progressively to less than 0.5?pg of TEQ in 1999. These estimates are lower than the 2.3?pg of TEQ currently recommended by the WHO. The main categories of foods contributing to the TEQ were animal meats and dairy products, with lesser amounts from fish and other foods.     

Fabrication and characterization of exfoliated chitosan–gelatin–montmorillonite nanocomposite nanofibers

Polymeric nanofibers as one of the most known nanotechnology products have huge potential applications in many fields due to their high aspect ratio and porosity, being capable of formation of three-dimensional structures and having great mechanical and biological properties. Chitosan is a natural abundant polymer which has attracted huge interests in biomedical and biological industries due to its biocompatible, biodegradable, and non-toxicity properties. However, electrospinning of chitosan is found to be a great challenge, blending it with other polymers such as gelatin was explored as means to improve the morphological deficiencies of chitosan nanofibers and facilitate its electrospinnability. On the other hand, montmorillonite (MMT) has been attracted great attention due to its remarkable improvement in properties of polymeric composites nanofibers. The main objective of this work was on effect of concretion of gelatin–chitosan blends and MMT on morphology of resulted nanocomposite nanofibers. The x-ray diffraction data demonstrated the exfoliation of MMT layers. The morphology of electrospun chiosan–gelatin–MMT composite nanofibers was characterized using scanning electron microscope (SEM). The miscibility of blend was determined using SEM and Fourier transform infrared spectrometer/attenuated total reflectance.     

Lipolysis and lipid oxidation in bacon during curing and drying–ripening

Dry-cured bacons were processed using pig bacon belly as material by dry-salting and drying–ripening. Lipolysis and lipid oxidation in intramuscular lipids were studied by evaluating the changes in lipid composition, lipolytic enzymes and lipoxygenase (LOX) activities, peroxide value (POV) and TBARS during processing. Lipid composition showed a significant decrease (p < 0.05) in phospholipids and an increase (p < 0.05) in free fatty acids (r = −0.85, p = 0.0004). All lipolytic activities decreased (p < 0.05) with increasing process time. Acid lipase showed higher activity than did neutral lipase (p < 0.05) throughout the processing. LOX activity increased significantly during salting (p < 0.01) and thereafter decreased. High salt content inhibited acid lipase and phospholipase activities but promoted LOX activity. Both POV and TBARS decreased (p < 0.05) with temperature rising during the last ripening period, suggesting that rising temperature in this period could lower oxidation indices in products. LOX was closely correlated with TBARS (r = 0.94) but not with POV (r = 0.36), indicating that LOX could facilitate lipid secondary oxidation.     

Selenium speciation analysis of Misgurnus anguillicaudatus selenoprotein by HPLC–ICP–MS and HPLC–ESI–MS/MS

Analytical methods for selenium (Se) speciation were developed using high-performance liquid chromatography (HPLC) coupled to either inductively coupled plasma mass spectrometry (ICP?CMS) or electrospray ionization tandem mass spectrometry (ESI?CMS/MS). Separations of selenomethionine (Se-Met) and selenocysteine (Se-(Cys)₂) with favorable peak shape and resolution were obtained by both HPLC-ICP-MS and HPLC?CESI?CMS/MS. Both methods achieved low limits of detection, high sensitivity and favorable stability. With HPLC?CESI?CMS/MS, signal suppression was observed when complex matrix was co-eluted, but excellent structural characterization was still achieved. Thus, HPLC-ICP-MS is better for the detection of Se species, and HPLC?CESI?CMS/MS is essential for molecular identification and confirmation. A water-soluble selenoprotein from purified M. anguillicaudatus muscle tissue was analyzed by the two complementary systems (HPLC-ICP-MS and HPLC?CESI?CMS/MS) with high sensitivity and accuracy. The results demonstrated that Se-Met was the predominant selenoamino acid in the purified selenoprotein from M. anguillicaudatus muscle tissue, and the concentration of Se-Met in the selenoprotein was 6.280?mg/kg (dry mass). In addition, in HPLC-ICP-MS, an unknown Se-containing compound with similar polarity to Se-(Cys)₂ was discovered. Using complementary data from HPLC?CESI?CMS/MS, it was determined that this unknown Se-containing compound was not Se(Cys)_2.     

Mycotoxins in spices and herbs–An update

Spices and herbs have been used since ancient times as flavor and aroma enhancers, colorants, preservatives, and traditional medicines. There are more than 30 spices and herbs of global economic and culinary importance. Among the spices, black pepper, capsicums, cumin, cinnamon, nutmeg, ginger, turmeric, saffron, coriander, cloves, dill, mint, thyme, sesame seed, mustard seed, and curry powder are the most popular spices worldwide. In addition to their culinary uses, a number of functional properties of aromatic herbs and spices are also well described in the scientific literature. However, spices and herbs cultivated mainly in tropic and subtropic areas can be exposed to contamination with toxigenic fungi and subsequently mycotoxins. This review provides an overview on the mycotoxin risk in widely consumed spices and aromatic herbs.     

HPLC–PDA–ESI–MS/MS profiling and chemopreventive potential of Eucalyptus gomphocephala DC

An HPLC–PDA–ESI/MS/MS method was developed to identify the phytoconstituents of the EtOAc fraction of Eucalyptus gomphocephala DC. The antioxidant effect of the EtOAc fraction together with its sub-fractions was determined in vitro. The cytotoxicity was evaluated on different cell lines. The EtOAc fraction exhibited strong antioxidant activity, reduced the viability of all cell lines and was more active on MCF-7 and HepG-2 cell lines. Subsequently, the cytotoxicity of the sub-fractions and the isolated compounds were tested on MCF-7, HepG-2. The EtOAc fraction possessed potential antitumour promoting properties. It inhibited the stimulated NO (20%), 5-LOX (48.0%) and COX-2 (49.7%) respectively (at concentration of 20 μg/ml). This study suggests that this fraction is a source of different antioxidant and cytotoxic compounds with potential chemopreventive properties that might prevent different stages of the carcinogenesis process.     

Comparison of headspace-SPME-GC–MS and LC–MS for the detection and quantification of coumarin,vanillin, and ethyl vanillin in vanilla extract products

A headspace-solid phase micro-extraction (HS-SPME) GC–MS method has been developed for the determination of coumarin, vanillin and ethyl vanillin in vanilla products. Limits of detection ranged from 1.33 to 13.2 ng mL⁻¹. Accuracy and precision data for the method were measured and compared to those obtained using LC-ESI-MS. A survey of 24 commercially available vanilla products was completed using both techniques. No coumarin was detected in any of the samples. Examination of the GC–MS chromatograms revealed the presence of 18 other flavor related compounds in the samples. The method validation and sample analysis data using HS-SPME-GC–MS were comparable to those obtained using the LC–MS method. Because the two methods are conceptually different from one another, both methods would not be subject to the same interferences. This would allow them to be used as confirmatory methods for each other.     

Physical and microscopic studies of flour–water systems

Two flour–water systems were prepared under different conditions. A mixed flour–water system (dough) was prepared by mixing and kneading, and an unmixed (Hydrated, Unmixed Flour=HUF system) flour–water system without mixing and kneading. For preparation of the systems wheat flours of different qualities were used. Characterisation of the systems was done by rheological and microscopic analyses. Rheological measurements were performed at small deformation in dynamic oscillating mode, as well as at large deformation by uniaxial extension. The dough, the HUF system and the gluten from them were also investigated by microscopic technique.The mixed and unmixed systems showed differences in structure causing different physical properties. At small deformations (dynamic oscillating measurements) as well as at large ones (uniaxial extension measurements) HUF systems were firmer than doughs having a higher resistance in uniaxial extension measurements and higher elasticity at the beginning of dynamic measurements. Differences in structure of dehydrated systems were also found by microscopic investigations.Presented in part at 51. Tagung für Getreidechemie, 2000, Detmold, Germany     

Synthesis and structure–activity relationships and effects of phenylpropanoid amides of octopamine and dopamine on tyrosinase inhibition and antioxidation

Phenylpropanoid amides of octopamine (OA) 1a–1e and dopamine (DA) 2a–2e were synthesised and the structure–activity relationships (SARs) for antioxidant and tyrosinase inhibition activities were analysed. Among synthesised compounds, 2c, which contains two catechol moieties, exhibited the most DPPH radical-scavenging activity (EC₅₀ = 16.2 ± 2.4 μM), and 1d exhibited significant tyrosinase inhibitory activity (IC₅₀ = 5.3 ± 1.8 μM). Interestingly, with the same acid moiety, OA derivatives showed more inhibitory effect on tyrosinase than did compounds derived from DA, whereas DA derivatives were found to have higher antioxidant activity than compounds derived from OA. The relationship between their structures and their potencies, demonstrated in the current study, will be useful for the design of optimal agents.     

Polyphenolic Extract of Barbary-Fig (Opuntia ficus-indica) Syrup: RP–HPLC–ESI–MS Analysis and Determination of Antioxidant, Antimicrobial and Cancer-Cells Cytotoxic Potentials

The traditionally derived syrup of Opuntia ficus-indica fruit is commonly used in homemade confectionery. Herein, the aqueous-acetone extract prepared from the Tunisian O. ficus-indica syrup was investigated. The qualitatively and quantitatively polyphenolic content was analysed using reversed-phase high-performance liquid chromatography–diode array detection (RP-HPLC–DAD) coupled to electrospray ionisation–mass spectrometry (ESI–MS). The extract contained 19.95?±?2.01 mg phenolics per gram of fresh starting material with isorhamnetin 3-O-robinobioside as the major compound (22.76%). The syrup extract showed strong antioxidant potentials as assessed by both ABTS and DPPH functional methods. It exhibited effective antimicrobial activity, particularly against Staphylococcus aureus and Staphylococcus epidermidis with a minimal bactericide concentration (MBC) of 1.3 mg phenolics/ml. Furthermore, at final concentrations in the range of 41.38–186.25 μg polyphenols/ml, the extract decreased human SH-SY5Y neuroblastoma and 3T3 fibroblast in vitro cell viability in a dose- and time-dependent manner compared to non-treated control cells. The observed effects were significantly (P?<?0.05) high against cancer lines. Extract concentrations higher than 106.43 μg/ml reduced cancer cells viability to 50–60% 1–3 h post-treatment. Further in vivo insight studies should emphasise and validate the herein obtained results.     

Effect of ionizing radiation on quality characteristics of vacuum-packaged normal,pale–soft–exudative,and dark–firm–dry pork

Normal, pale–soft–exudative (PSE), and dark–firm–dry (DFD) pork Longissimus dorsi muscles were vacuum-packaged, irradiated at 0, 2.5 or 4.5 kGy, and stored at 4 °C for 10 days. The pH, color and lipid oxidation of pork were determined at 0, 5 and 10 days of storage. Volatile production from pork loins was determined at Day 0 and Day 10, and sensory characteristics at Day 7 of storage. Irradiation increased the redness of vacuum-packaged normal, PSE and DFD pork. However, the 2-thiobarbituric acid reactive substances (TBARS) values of three types of pork were not influenced by irradiation and storage time. Irradiation increased the production of sulfur (S)-containing volatile compounds, such as mercaptomethane, dimethyl sulfide, carbon disulfide, methyl thioacetate, and dimethyl disulfide, as well as total volatiles in all three types of pork. Normal pork produced higher levels of total and S-containing volatile compounds than the PSE and DFD pork did. The volatiles produced by irradiation were retained in the vacuum packaging bag during storage. Although the odor preference for the three meat types of pork was not different, the panelists could distinguish irradiated meat from the non-irradiated. Industrial relevance: Several US meat companies have already started test-marketing irradiated meat products. Irradiation and the subsequent storage of pork improved the color of PSE and DFD pork, and showed generally similar effects on the production of volatiles, except that there appeared to be a lower level of S-volatiles in the PSE than in the other two samples. This indicated that irradiation can increase the utilization of low-quality pork (PSE and DFD). DFD pork, in particular, which has shorter shelf-life than the others, could benefit the most from irradiation because the shelf-life of DFD meat can be extended significantly by both the methods of vacuum packaging and irradiation.     

Evaluation of cheese authenticity and proteolysis by HPLC and urea–polyacrylamide gel electrophoresis

Chromatographic and electrophoretic methods have been established as useful tools in characterising cheese ripening and in the detection of milk adulteration. The purpose of this work was to evaluate casein proteolysis of cheeses made from bovine, ovine or mixtures of bovine and ovine milks, as well as ovine cheese authenticity, for 30 days of ripening by HPLC and urea–polyacrylamide gel electrophoresis.Complementary information was obtained by both techniques when applied to the study of casein proteolysis during 30 days of ripening of ovine milk cheeses, ovine milk cheeses with 10% and 20% of bovine milk and bovine milk cheeses, manufactured according to the traditional Terrincho technology. For ovine cheeses, α-casein was the fraction that showed the higher degradation during cheese ripening. A similar behaviour was observed for ovine milk cheese with 10% of bovine milk. The profile for ovine milk cheese with 20% of bovine milk was more similar to that obtained for bovine cheese. Concerning bovine milk cheeses, electrophoresis was the most sensitive technique for the evaluation of proteolysis in these cheeses.Ten and 20% of bovine milk could be detected in ovine milk cheeses by urea–polyacrylamide gel electrophoresis and HPLC, respectively, even after 30 days of ripening.     

Wheat gluten–based coatings and films: Preparation,properties, and applications

Effective food packaging that can protect foodstuffs from physical, chemical, and biological damage and maintain freshness and quality is essential to the food industry. Wheat gluten shows promise as food packaging materials due to its edibility, biodegradability, wide availability, low cost, film-forming potential, and high resistance to oxygen. The low mechanical properties and poor water permeability of wheat gluten coatings and films limit their wide applications; however, some inferior properties can be improved through various solutions. This work presents a comprehensive review about wheat gluten–based coatings and films, including their formulation, processing methods, properties, functions, and applications. The mechanical and water resistance properties of coatings and films can be reinforced through wheat gluten modification, combinations of different processing methods, and the incorporation of reinforcing macromolecules, antioxidants, and nanofillers. Antioxidants and antimicrobial agents added to wheat gluten can inhibit microbial growth on foodstuffs, maintain food quality, and extend shelf life. Performances of wheat gluten–based coatings and films can be further improved to expand their applications in food packaging. Current research gaps are identified. Future research is needed to examine the optimal formulation and processing of wheat gluten–based coatings and films and their performance.     

Consumer responses for tenderness and overall impression can be predicted by visible and near-infrared spectroscopy,Meullenet–Owens razor shear,and Warner–Bratzler shear force

Beef ribeye rolls (n = 40) from Select, low Choice, top (upper 2/3) Choice, and Prime quality grade carcasses were used to determine the relationship of visible and near-infrared spectroscopy (VNIR) reflectance, Warner–Bratzler shear force (WBSF), and Meullenet–Owens razor shear (MORS) with consumer responses for tenderness and overall impression. Steaks (2.54 cm) were cut and assigned to either 14 or 28 d aging (n = 4/aging period). Reflectance in the VNIR spectrum was measured 1 d from the box-date no less than 30 min after cutting, and prior to aging. The steak used for VNIR measurement was designated for WBSF and MORS measurement, whereas three adjacent steaks were cooked for evaluation by a consumer panel (n = 240 members). Steaks from the Select-grade ribeye rolls had the greatest (P = 0.06) WBSF values and lower (P < 0.05) overall impression scores than those from top Choice and Prime quality grades. Consumer panelists evaluated steaks aged 28 d as more tender (P < 0.05) than those aged 14 d. The relationship of mechanical tenderness measurements were higher with consumer panel responses for tenderness than with overall impression, and those relationships were stronger for the Select grade than for quality grades with higher degrees of marbling. The 2nd derivatives of VNIR measurements were more successful at predicting consumer panel responses of tenderness and overall impression than WBSF and MORS; thus, VNIR methodology was less invasive and more predictive than other, more traditional tenderness measurements.