共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
4.
5.
6.
研究了氨法脱硫产物硫酸铵结晶过程中反应条件对粒径分布以及硫酸铵晶形的影响。结果表明,最佳反应条件为:搅拌速度300 r/min,蒸发温度70℃,结晶溶液pH值5.0。 相似文献
7.
高纯硼酸制备过程中的结晶动力学 总被引:1,自引:1,他引:0
采用HCl气体液相酸化硼砂的中和反应,并结合重结晶法与离子树脂交换法,制备了高纯H3BO3产品. 实验考察了H3BO3-NaCl-H2O体系中溶液过饱和度、结晶温度、结晶时间、搅拌速度及溶液中所含杂质等因素对H3BO3结晶过程的影响. 结果表明,溶液浓度为18.26%、结晶温度为10℃、结晶时间为480 min、搅拌速度为300 r/min,并选取适当的降温方式有利于H3BO3析晶,结晶率大于83%,晶体呈细小颗粒状. 体系中所含的NaCl杂质促进了H3BO3析晶. 由实验数据得到该体系中H3BO3的结晶动力学曲线,并建立了结晶动力学方程,结晶反应级数为2. 相似文献
8.
就硫铵蒸发结晶过程中的几个重要影响因素进行了实验研究,包括溶液pH值、溶液蒸发温度及搅拌速度,得出较优结晶工艺操作条件:溶液pH值为3.0、蒸发温度为70℃、搅拌速度为100 r/min。将该操作条件下得到的硫铵晶体与上海石化股份有限公司化工部丙烯腈装置硫铵回收单元的产品相比较,发现在粒径和粒径分布方面,实验所得晶体优于工业产品。结果表明,该优化条件具有可行性,可应用于硫铵工业生产。 相似文献
9.
10.
11.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
12.
13.
14.
利用组件技术开发化工原理实验课件,给出了系统层、组件库层和应用层的架构划分。重点讨论了组件库的设计,给出了流体阻力这一典型实验的实现描述。实践证实,基于组件技术可以提高仿真实验的开发效率。 相似文献
16.
The miscibility of various amorphous polybutadienes with mixed microstructures of 1,4 addition units (cis, 1,4 and trans 1,4) and 1,2 addition units have been investigated. The studies here involved optical transparency, differential scanning calorimetry, and small angle light scattering. It was found that a 90 percent (cis) 1, 4 addition polybutadiene was immiscible with high (91 percent) 1,2 addition polybutadiene. Reduction of the 1,2 content to 71 percent induced an upper critical solution temperature (UCST) with the cis 1,4 polymer. Polybutadienes with 50 percent and 10 percent 1,2 contents were miscible above the crystalline melting temperature of the cis 1,4 polybutadiene. Immiscibility of the 91 percent 1,2 addition polymer was also found with a 10 percent 1,2 polybutadiene. The latter polymer also exhibits an UCST with the 71 percent 1,2 polymer. The results are used to interpret the characteristics of blends of polybutadienes of varying microstructure. 相似文献
17.
以F类粉煤灰为例,详细介绍了测定粉煤灰中烧失量的步骤、计算数学模型、影响测量不确定度的因素以及各项测量不确定度分量评定,人员、设备、材料、方法、环境都是影响测量不确定的因素。 相似文献
18.
我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉 相似文献
19.
20.
Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969. 相似文献