Highly robust position control of BLDDSM using an improved integral variable structure systems

A highly robust position controller for brushless direct drive servo motors (BLDDSM) is presented using a new improved variable structure system with an integral-augmented sliding surface. With the proposed technique, the reaching phase is completely removed by the integral sliding surface. The dynamics of its ideal sliding mode is analytically obtained from a given initial condition to the origin without any reaching phase. In order to choose a suitable integral sliding surface, the optimal regulator theory is effectively applied. Moreover, the suggested control technique can exhibit the output response identical to that previously designed in the integral sliding surface for all the load variations and parameter uncertainties. The usefulness of the proposed algorithm is illustrated through the comparative experiment studies on the position controls of BLDDSM under load variations.     

带有非线性不确定奇异系统的积分滑模控制

针对一类含有非线性不确定的奇异系统, 提出了一种面向性能的鲁棒控制器. 控制器由3部分组成: 积分滑模控制、附加的非线性控制及复合非线性反馈控制. 积分滑模控制可将匹配不确定完全抵消并使系统轨迹进入理想滑模; 附加的非线性控制用来抑制理想滑动模态上非匹配不确定对系统稳定性和性能的影响; 复合非线性反馈控制则保证闭环系统输出按性能要求渐近地跟踪参考输入信号. 最后通过算例说明所提算法的有效性.     

Nonlinear integral-type sliding surface for both matched and unmatched uncertain systems

This note presents a new nonlinear integral-type sliding surface which incorporates a virtual nonlinear nominal control to achieve prescribed specifications. First, the plant with matched uncertainties is considered. The resultant closed-loop system during ideal sliding mode behaves exactly like the nominal plant under the nonlinear nominal control, which completely ifies the matched uncertainties and consequently satisfies the prescribed specifications. Second, the stability analysis of the proposed sliding mode for the systems with unmatched uncertainties is performed to exploit the stability conditions. Numerical results demonstrate the validity of the proposed concept.     

Robust adaptive trajectory tracking control of underactuated autonomous underwater vehicles with prescribed performance

In this paper, a novel robust adaptive trajectory tracking control scheme with prescribed performance is developed for underactuated autonomous underwater vehicles (AUVs) subject to unknown dynamic parameters and disturbances. A simple error mapping function is proposed in order to guarantee that the trajectory tracking error satisfies the prescribed performance. A novel additional control based on Nussbaum function is proposed to handle the underactuation of AUVs. The compounded uncertain item caused by the unknown dynamic parameters and disturbances is transformed into a linear parametric form with only single unknown parameter called virtual parameter. On the basis of the above, a novel robust adaptive trajectory tracking control law is developed using dynamic surface control technique, where the adaptive law online provides the estimation of the virtual parameter. Strict stability analysis indicates that the designed control law ensures uniform ultimate boundedness of the AUV trajectory tracking closed‐loop control system with prescribed tracking performance. Simulation results on an AUV in two different disturbance cases with dynamic parameter perturbation verify the effectiveness of our adaptive trajectory tracking control scheme.     

任意初态下的工业机器人迭代学习控制

对迭代初值为任意值的工业机器人轨迹跟踪控制系统,提出了一种基于滑模面的非线性迭代学习控制算法,使机器人轨迹能快速、精确跟踪上期望轨迹。基于有限时间收敛原理,构建了关于机器人轨迹跟踪误差的迭代滑模面,在滑模面内,机器人轨迹跟踪误差在预定时间内收敛到零。设计了基于滑模面的迭代学习控制算法,理论证明了随着迭代次数的增加,处于任意初态的轨迹将一致收敛到滑模面内,解决了迭代学习中的任意初值问题。数值仿真验证了该算法的有效性和抗干扰能力。     

Adaptive sensorless robust control of AC drives based on sliding mode control theory

This paper focuses in the design of a new adaptive sensorless robust control to improve the trajectory tracking performance of induction motors. The proposed design employs the so‐called vector (or field oriented) control theory for the induction motor drives, being the designed control law based on an integral sliding‐mode algorithm that overcomes the system uncertainties. This sliding‐mode control law incorporates an adaptive switching gain in order to avoid the need of calculating an upper limit for the system uncertainties. The proposed design also includes a new method in order to estimate the rotor speed. In this method, the rotor speed estimation error is presented as a first‐order simple function based on the difference between the real stator currents and the estimated stator currents. The stability analysis of the proposed controller under parameter uncertainties and load disturbances is provided using the Lyapunov stability theory. The simulated results show, on the one hand that the proposed controller with the proposed rotor speed estimator provides high‐performance dynamic characteristics, and on the other hand that this scheme is robust with respect to plant parameter variations and external load disturbances. Finally, experimental results show the performance of the proposed control scheme. Copyright © 2006 John Wiley & Sons, Ltd.     

四旋翼飞行器自适应动态面轨迹跟踪控制

针对具有未知外界扰动和系统不确定性集总未知非线性的四旋翼飞行器,提出了一种采用自适应不确定性补偿器的自适应动态面轨迹跟踪方法.通过将四旋翼飞行器系统分解为位置、欧拉角和角速率3个动态子系统,使各子系统虚拟控制器设计能充分考虑欠驱动约束;结合动态面控制技术,通过采用一阶低通滤波器,避免对虚拟控制信号求导;进而设计自适应不确定性补偿器,处理未知外界扰动和系统不确定性,最终确保闭环控制系统的稳定性、跟踪误差一致最终有界和系统所有状态信号有界.仿真研究和实验结果验证了本文提出控制方法的有效性和优越性.     

Adaptive sliding mode trajectory tracking control for wheeled mobile robots

This paper discusses the problem of adaptive sliding mode trajectory tracking control for wheeled mobile robots in the presence of external disturbances and inertia uncertainties. A new fast nonsingular terminal sliding mode surface without any constraint is proposed, which not only avoids singularity, but also retains the advantages of sliding mode control. In order to implement the trajectory tracking mission, the error dynamic system is divided into a second-order subsystem and a third-order one. First, an adaptive fast nonsingular terminal sliding mode control law of the angular velocity is constructed for stabilising the second-order subsystem in finite time. Then, another adaptive fast nonsingular terminal sliding mode control law of the linear velocity is designed to guarantee the stability of the third-order subsystem. Finally, a simulation example is provided to demonstrate the validity of the proposed control scheme.     

Adaptive Sliding Mode Control for Re-entry Attitude of Near Space Hypersonic Vehicle Based on Backstepping Design

Combining sliding mode control method with radial basis function neural network (RBFNN), this paper proposes a robust adaptive control scheme based on backstepping design for re-entry attitude tracking control of near space hypersonic vehicle (NSHV) in the presence of parameter variations and external disturbances. In the attitude angle loop, a robust adaptive virtual control law is designed by using the adaptive method to estimate the unknown upper bound of the compound uncertainties. In the angular velocity loop, an adaptive sliding mode control law is designed to suppress the effect of parameter variations and external disturbances. The main benefit of the sliding mode control is robustness to parameter variations and external disturbances. To further improve the control performance, RBFNNs are introduced to approximate the compound uncertainties in the attitude angle loop and angular velocity loop, respectively. Based on Lyapunov stability theory, the tracking errors are shown to be asymptotically stable. Simulation results show that the proposed control system attains a satisfied control performance and is robust against parameter variations and external disturbances.      

Finite‐Time Sliding Mode Trajectory Tracking Control of Uncertain Mechanical Systems

The problem of finite‐time tracking control is studied for uncertain nonlinear mechanical systems. To achieve finite‐time convergence of tracking errors, a simple linear sliding surface based on polynomial reference trajectory is proposed to enable the trajectory tracking errors to converge to zero in a finite time, which is assigned arbitrarily in advance. The sliding mode control technique is employed in the development of the finite‐time controller to guarantee the excellent robustness of the closed‐loop system. The proposed sliding mode scheme eliminates the reaching phase problem, so that the closed‐loop system always holds the invariance property to parametric uncertainties and external disturbances. Lyapunov stability analysis is performed to show the global finite‐time convergence of the tracking errors. A numerical example of a rigid spacecraft attitude tracking problem demonstrates the effectiveness of the proposed controller.     

基于自适应滑模的欠驱动无人艇轨迹跟踪控制算法

针对欠驱动水面无人艇在航行过程中存在的海洋环境干扰、数学模型参数不确定、执行器故障等问题,提出了一种基于扰动观测器与神经网络技术的自适应滑模轨迹跟踪策略。在无人艇三自由度模型的基础上,结合视线制导率,提出了一种新的轨迹跟踪制导策略。采用自适应滑模控制技术设计了欠驱动无人艇轨迹跟踪控制器,有效地抑制了执行器衰减故障对无人艇控制系统的影响;同时运用了非线性扰动观测器和自适应径向基函数神经网络分别对无人艇受到的外界干扰和模型参数不确定性进行补偿和拟合,提高了控制系统的抗干扰能力。基于Lyapunov定理证明了所设计的控制系统的稳定性,并在MATLAB中进行了仿真测试。仿真结果表明,所提出的轨迹跟踪控制算法可以在较为复杂的环境下实现对欠驱动无人艇的精准控制;相较于对比算法,位置的平均跟踪误差减小了80%以上,具备较高的稳定性和鲁棒性。     

Feedback linearizing and sliding mode control of a variable reluctance motor

Direct-drive connection of electric motors represents a suitable solution to friction and backlash problems introduced by mechanical reduction gears. Variable reluctance (VR) are a special type of switched reluctance motors whose construction is well suited for direct-drive connection. Although these motors are traditionally conceived as stepper motors, continuous motion can be obtained by implementing suitable closed-loop control in the drive. The authors' main aim is to design a high-performance robust controller for a VR motor intended for velocity trajectory tracking in robotics applications where continuous motion is required. A cascade controller structure (velocity-torque) is considered. In the design of the torque controller, both feedback linearizing and sliding mode techniques are considered. Feedback linearization performs slightly better in the ideal case, but under more realistic operating conditions the sliding mode controller demonstrates comparable or even better performance. A very simple but extremely robust velocity controller is designed using a dynamic sliding mode approach, ensuring robustness to large variations of load torque and inertia, typical of direct-drive robotics applications. A simulation experiment of the overall controller with the motor connected to a single link robotic arm shows very good tracking properties as well as insensitivity to large variations of load torque and inertia.     

Tracking control of non-linear systems using sliding surfaces,with application to robot manipulators†

A methodology of feedback control is developed to achieve accurate tracking in a. class of non-linear, time-varying systems in the presence of disturbances and para meter variations. The methodology uses in its idealized form piecewise continuous feedback control, resulting in the state trajectory sliding along a time-varying sliding surface in the state space. This idealized control law achieves perfect tracking; however, non-idealities in its implementation result in the generation of an undesirable high-frequency component in the state trajectory. To rectify this, it is shown how continuous control laws may be used to approximate the discontinuous control law to obtain robust tracking to within a prescribed accuracy without generating undesirable high-frequency signal. The method is applied to the control of a two-link manipulator handling variable loads in a flexible manufacturing system environment.     

一种基于反步法的鲁棒自适应终端滑模控制

针对不确定严格反馈块控非线性系统, 提出了一种基于反步法的鲁棒自适应终端滑模变结构控制方法. 系统的未知不确定及外界干扰由模糊系统在线逼近, 利用反步法设计了变结构控制的终端滑模面, 并由此得到了鲁棒自适应终端滑模控制器, 使系统的跟踪误差在有限时间内趋于给定轨迹的任意小的邻域内. 通过Lyapunov定理证明了闭环系统所有信号最终有界. 对某战斗机6自由度机动仿真结果表明, 该方法具有强鲁棒性.     

Predefined-time control for Euler–Lagrange systems with model uncertainties and actuator faults

A novel adaptive predefined-time tracking control algorithm is proposed for the Euler–Lagrange systems (ELSs) with model uncertainties and actuator faults. Compared with traditional finite-time and fixed-time studies, the system output tracking error under the proposed predefined-time controller converges to a small neighborhood of zero in finite time, whose upper bound is exactly a design parameter in the control algorithm. For the uncertain model, radial-based function neural network (RBFNN) is utilized to approximate the continuous uncertain dynamics. To deal with the actuator faults, an adaptive control law is involved in the fault-tolerant controller. In order to achieve the predefined-time bounded, a novel predefined-time sliding mode surface is designed. It is proved that the tracking error vector trajectory of closed-loop system is semi-globally uniformly ultimately predefined-time bounded, and the upper bounds of both the system settling time and the corresponding output tracking error can be adjusted with a simple parameter. Simulation examples finally demonstrate the effectiveness of the proposed control algorithm.     

基于互补滑模控制和迭代学习控制的永磁直线同步电动机速度控制

为满足永磁直线同步电动机(PMLSM)伺服系统高速度高精度的要求,抑制不确定性对系统性能的影响,提出一种互补滑模控制(CSMC)和迭代学习控制(ILC)相结合的控制方法.该方法结合了CSMC强鲁棒性的优点和ILC跟踪精度高的特点,以CSMC中积分滑模面为基础设计新型迭代学习律,既可利用ILC对系统未建模动态进行估计,抑制端部效应、齿槽效应和摩擦力等周期不确定性的影响,又可利用CSMC减小参数变化和外部扰动等非周期不确定性对系统的影响,从而提高控制器的收敛速度和收敛精度,保证系统具有较强的速度跟踪性能.实验结果表明,该方法有效地提高了系统的动态响应能力,改善了速度跟踪精度.     

飞行速度可调导弹三维制导律研究

为获得更好的制导性能,针对一类采用流量可调发动机的导弹,利用其所增加的飞行速度控制自由度,提出一种三维空间下比例导引+飞行速度控制的双重控制滑模制导律。以比例导引作为基础,在对二维、三维零控脱靶量分析的基础上,以零控脱靶量为跟踪目标选取合适的滑模面,并进一步使用辅助滑模面和有限时间超螺旋干扰观测器对滑模面中的不确定项进行估计,推导了减少脱靶量的速度控制制导律。仿真结果表明,相比于经典的比例导引,在考虑空气阻力的场景下,所设计的制导律脱靶量更小,弹道更平滑,滑模面收敛情况理想,实现了导弹飞行速度的主动控制。     

非匹配不确定性影响下的无人车路径跟踪控制

针对无人车在非匹配不确定性影响下的路径跟踪控制问题,设计一种基于线性矩阵不等式（LMI）的滑模控制器.首先,根据车辆运动学和动力学方程,同时考虑轮胎侧滑造成的不确定性、车辆侧偏约束以及随机干扰影响,建立车辆非线性不确定系统模型;然后,提出一种线性滑模路径跟踪控制方法,给出线性滑模面存在的充分条件,并推导出线性滑模面存在的显式公式,以保证约束于该滑模面的降阶等价系统的二次稳定性;最后,在SerretFrenet坐标系下验证车辆单、双移线运动时的路径跟踪控制效果.仿真结果表明,所设计的滑模控制器可以保证对参考路径的稳定跟踪,具有较强的鲁棒性.     

Robust Sliding Control of Robotic Manipulators Based on a Heuristic Modification of the Sliding Gain

A task space robust trajectory tracking control is developed for robotic manipulators. A second order linear model, which defines the desired impedance for the robot, is used to generate the reference position, velocity and acceleration trajectories under the influence of an external force. The control objective is to make the robotic manipulator’s end effector track the reference trajectories in the task space. A sliding mode based robust control is used to deal with system uncertainties and external perturbations. Thus, a sliding manifold is defined by a linear combination of the tracking errors of the system in the task space built from the difference between the real and the desired position, velocity and acceleration trajectories in comparison with previous works where the sliding manifold was defined by the desired impedance and the external force. Moreover, the ideal relay has been substituted by a relay with a dead-zone in order to fit in with the actual way in which a real computational device implements the typical sign function in sliding mode control. Furthermore, a higher level supervision algorithm is proposed in order to reduce the amplitude of the high frequency components of the output associated to an overestimation of the system uncertainty bounds. Then, the robust control law is applied to the case of a robot with parametric uncertainty and unmodeled dynamics. The closed-loop system is proved to be robustly stable with all signals bounded for all time while the control objective is fulfilled in practice. Finally, a simulation example which shows the usefulness of the proposed scheme is presented.     

Adaptive fuzzy sliding mode algorithm-based decentralised control for a permanent magnet spherical actuator

The dynamic model of multi-degree-of-freedom permanent magnet (PM) spherical actuators is multivariate and nonlinear due to strong inter-axis couplings, which affects the trajectory tracking performance of the system. In this paper, a decentralised control strategy based on adaptive fuzzy sliding mode (AFSM) algorithm is developed for a PM spherical actuator to enhance its trajectory tracking performance. In this algorithm, the coupling terms are separated as subsystems from the entire system. The AFSM algorithm is applied in such a way that the fuzzy logic systems are used to approximate the subsystem with uncertainties. A sliding mode term is introduced to compensate for the effect of coupling terms and fuzzy approximation error. The stability of the proposed method is guaranteed by choosing the appropriate Lyapunov function. Both simulation and experimental results show that the proposed control algorithm can effectively handle various uncertainties and inter-axis couplings, and improve the trajectory tracking precision of the spherical actuator.