共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
3.
分析了卫星有效载荷信号处理需求,提出了基于宽带接收的星载信号处理技术流程,针对星载硬件资源有限和需要实现对重点信号搜索匹配的要求,同时考虑到宽带接收时接收灵敏度较差等问题,给出了适于星载实现的多信号分离、低信噪比下调制识别和辐射源细微特征提取方法,通过仿真验证了算法的有效性. 相似文献
4.
信号上升或下降时间对高速电路信号完整性影响的研究 总被引:6,自引:2,他引:4
为了研究信号上升或下降时间对信号完整性的影响,从理论上分析论证了信号上升或下降时间是造成反射,串扰同步开关噪声及电磁干扰等信号完整性问题的根本原因。利用Cadence公司的SigXplorer仿真软件建立相应的拓扑电路,通过对IBIS模型信号上升时间参数进行修改,分别在不同信号上升时间和信号频率下进行仿真。通过对仿真结果的对比分析,验证了理论分析的正确性。提出了信号上升或下降时间是造成信号完整性问题的根本原因的观点,纠正了从信号频率上分析信号完整性问题的误区。 相似文献
5.
6.
信号完整性分析是高速电路设计的重要环节,文章分析了反射、串扰、过冲和下冲、延时等影响高速电路信号完整性的主要因素。利用信号完整性仿真工具HyperLynx,对印制板进行了详细仿真,并根据仿真结果,对设计进行了优化。 相似文献
7.
8.
通过分析卫星信号下行链路中接收设备对信号衰减的具体影响,找到传输损耗的主要原因,在现有条件下,解决一星多信号接收中出现的问题. 相似文献
9.
地面检测星载激光测距体制设备的性能时,需要提供稳定且随机可调的高精度仿真距离光脉冲,于是提出了动态距离模拟技术。介绍了动态距离模拟基本原理、系统自修正基本原理。设计了一套集激光接收、延迟控制、高精度信号延迟、激光器、修正光纤、平衡探测器等单元于一体的动态距离模拟系统,该系统能够模拟出高精度的动态距离信息,并具备系统自修正能力,解决了动态距离模拟器的仪器参数漂移问题。动态距离模拟器的精度检测实验、动态距离模拟器与星载激光测距体制设备实际工作试验,共同证明了该系统的精度、性能稳定性可以满足目前国内绝大多数星载激光测距体制设备地面检测的需求。 相似文献
10.
高速电路中的信号完整性分析 总被引:1,自引:0,他引:1
随着嵌入式系统速度的提高,信号完整性(Signal Integrity,SI)问题受到越来越多的关注。由于信号质量不理想而造成系统崩溃的现象经常出现。结合系统设计中的实例,对高速信号传输的信号完整性问题作了较为详细的论述。在电路设计初期,通过PROTEL软件对和信号完整性进行分析,仿真结果指导PCB板的设计,可以有效地提高信号的完整性,极大地缩短设计周期,降低设计成本。 相似文献
11.
The article describes a model representation of radar probing data in form of a mixture of background and target samples, which is the sum of two random variables with very different parameters. For model development we research the behavior of the central moments of the distribution mix without assuming the distribution law form. An example it is described the detection of the signal at the output of compression system of chirp ionosonde. 相似文献
12.
解决IP网QoS问题是目前通信领域的研究热点之一.虽然研究已经取得了一定的进展,但人们对于IP 网QoS本身的含义及相关的问题还有着不同的理解.本文将从IP网QoS的定义入手讨论相关的一些问题以及解决IP网QoS问题所做的各种努力. 相似文献
13.
14.
《Proceedings of the IEEE. Institute of Electrical and Electronics Engineers》1968,56(6):1024-1032
Assuming that visual responses are due to the action of particles on the membrane of the visual cells, the stochastic variability of the response should be a function of the number of particles producing it. Quantitative predictions can be made with the aid of a model proposed in previous articles. It is found that responses produced in visual cells of Limulus by absorption of a single photon have the stochastic properties which would be expected if the response to one photon were brought about by 25 particles. It is concluded from this that the processes leading to visual responses produce multiplication of particles. The effects of temperature and of metabolic poisons suggest that these processes are of chemical nature. 相似文献
15.
16.
罗晓羽 《信息技术与标准化》2008,(6):37-39
论述了推进电子行业标准制修订项目计划管理信息化的必要性.并提出了具体措施;详细介绍了电子行业标准制修订项目计划管理数据库的设计思路和实现方法.阐述了对后续工作的几点思考. 相似文献
17.
对影响镍镀层内应力的因素做了介绍和分析,提出了对收缩应力的一种解释,提供了排除这些因素影响的方法,指出重视镀液的管理是减少各种影响内应力因素的主要办法。 相似文献
18.
By means of exact conformal mapping method we have defined character of dependence of squares amounts of angular part of film
element on angled part dimension. We propose relations, approximating obtained dependence. Calculation results and experimental
researches of large-scale models are represented. 相似文献
19.
Moshrefzadeh R.S. Radcliffe M.D. Lee T.C. Mohapatra S.K. 《Lightwave Technology, Journal of》1992,10(4):420-425
The temperature dependence of refractive index of polymer films was determined for a number of slab waveguides by a grating coupling method. This dependence was examined as a function of parameters such as molecular weight and glass transition temperature of the polymer. Temperature-induced changes in N TE-N TM , N being the effective index, were studied systematically for different slab waveguide compositions. It is shown that with proper device design and choice of polymeric materials, thermal effects can be reduced 相似文献
20.
A. M. Emel’yanov 《Semiconductors》2010,44(9):1134-1139
A method for analyzing the luminescence spectra of semiconductors is suggested. The method is based on differentiation of
the spectra. The potentialities of the method are demonstrated for luminescence in the region of the fundamental absorption
edge of Si and SiGe alloy single crystals. The method is superior in accuracy to previously known luminescence methods of
determining the band gap of indirect-gap semiconductors and practically insensitive to different conditions of outputting
radiation from the sample. 相似文献