Investigation on selective adsorption of Hg(II) ions using 4‐vinyl pyridine grafted poly(ethylene terephthalate) fiber

In the work, poly(ethylene terephthalate) (PET) fibers were grafted with 4‐vinyl pyridine (4‐VP) monomer using benzoyl peroxide (Bz₂O₂) as initiator in aqueous media. The removal of Hg(II) ions from aqueous solution by the reactive fiber was examined by batch equilibration technique. Effects of various parameters such as pH, graft yield, adsorption time, initial ion concentration, and adsorption temperature on the adsorption amount of metal ions onto reactive fibers were investigated. The optimum pH of Hg(II) was found 3. The maximum adsorption capacity was found as 137.18 mg g^?1. Moreover such parameters as the adsorption kinetics, the adsorption isotherm, desorption time and the selectivity of the reactive fiber were studied. The adsorption kinetics is in better agreement with pseudo‐first order kinetics, and the adsorption data are good fit with Freundlich isotherms. The grafted fiber is more selective for Hg(II) ions in the mixed solution of Hg(II)‐Ni(II), Hg(II)‐Zn(II), and Hg(II)‐Ni(II)‐Zn(II) at pH 3. Adsorbed Hg(II) ions were easily desorbed by treating with 1M HNO₃ at room temperature. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Adsorption behavior of copper(II) ion from aqueous solution on methacrylic acid‐grafted poly(ethylene terephthalate) fibers

The adsorption behavior of methacrylic acid‐grafted poly(ethylene terephthalate) fibers was studied toward the copper(II) ion in aqueous solutions by a batch equilibriation technique. The influence of treatment time, temperature, pH of the solution, metal ion concentration, and graft yield were considered. One hour of adsorption time was found sufficient to reach adsorption equilibrium for the copper(II) ion. It was found that the adsorption isotherm of Cu(II) fits Langmuir‐type isotherms. The adsorption process is not affected by the temperature when treated with low ion concentration, but is remarkably decreased at a high ion concentration. The heat of adsorption value was calculated as 0.71 kcal/mol. It was found that the reactive fibers are stable and regenerable by acid without losing their activity. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 75: 766–772, 2000     

The adsorption of Cu(II) ion from aqueous solution upon acrylic acid grafted poly(ethylene terephthalate) fibers

This study is concerned with the investigation of the adsorption properties of acrylic acid grafted poly(ethylene terephthalate) fibers by the use of Cu(II) ions in aqueous solutions. Influence of pH, graft yield, contact time, concentration of the ion, and reaction temperature on the amount of ion adsorbed upon reactive fiber were investigated. The time in which the adsorption reached to the equilibrium value was determined as 1 h. The adsorption isotherm of Cu(II) ion was found to be a Langmuir type and the heat of adsorption was calculated as ?10.1 kJ mol^?1. It was observed that the adsorbed Cu(II) ion upon acrylic acid grafted poly(ethylene terephthalate) fibers could be recovered in acidic media. The fiber could also readsorb Cu(II) ions without losing its activity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1216–1220, 2003     

Removal of Pb(II) from Aqueous Solution by Cross-linked Starch Phosphate Carbamate

The adsorption process of Pb(II) ions from aqueous solution by water-insoluble starch phosphate carbamates was investigated. The influences of adsorption conditions, such as adsorption time, adsorbent dose, pH, content of the substituent groups, initial Pb(II) concentration, and temperature, were thoroughly studied. It was shown that an adsorption time of 20 min is sufficient to reach the adsorption equilibrium, the adsorption equilibrium data follow well the Langmuir isotherm model, and the adsorption of Pb(II) ions on cross-linked starch phosphate carbamate is endothermic in nature. For the cross-linked starch phosphate carbamate (CSPC3) with a phosphate group content of 3.10 mmol/g and a carbamate group content of 1.40 mmol/g, the maximum adsorption capacity evaluated from the Langmuir isotherm towards Pb(II) is 2.01 mmol/g. In addition, repeated adsorption/desorption cycles were performed to examine the reusability of adsorbents and the recovery efficiency of Pb(II) ions. The adsorption capacity of Pb(II) ions by CSPC3 decreased from 1.85 to 1.47 mmol/g for three cycles.     

Kinetics and Thermodynamics of Lead (II) Adsorption on Vermiculite

Abstract

The kinetics and thermodynamics of Pb(II) adsorption on vermiculite have been studied by the sets of experiments at various conditions (temperature, initial lead concentration and adsorption time). The structures of the vermiculite before and after Pb(II) adsorption were measured using X‐ray diffraction (XRD), thermogravimetric analysis (TA), and X‐ray photoelectron spectroscopy (XPS). Adsorption of Pb(II) was strongly affected by pH. First order kinetics model best described the reaction rate, and the adsorption capacity calculated by the model was consistent with that actual measurement. Isotherms for the adsorption of Pb(II) on vermiculite were developed and the equilibrium data fitted well to the Langmuir and Freundlich models. Thermodynamic parameters such as enthalpy, entropy, and free energy were calculated using the Van't Hoff equations. The thermodynamics of Pb(II) on vermiculite indicates the spontaneous and endothermic nature of adsorption. Quantitative desorption of Pb(II) from vermiculite was found to be more than 40% which facilitates the sorption of metal by ion exchange     

Adsorption of lead(II) from aqueous solution by activated carbon prepared from Eichhornia

Activated carbon prepared from Eichhornia was used for the adsorptive removal of Pb(II) from aqueous solution. As the raw material for the preparation of the activated carbon is an aquatic weed, the production of this carbon is expected to be economically feasible. Parameters such as agitation time, metal ion concentration, adsorbent dose and pH were studied. Adsorption equilibrium was reached in 100 min for a solution containing 15 mgdm^?3 and 125 min for solutions containing 20 and 25 mgdm^?3 Pb(II), respectively. Adsorption parameters were determined using both Langmuir and Freundlich isotherm models. The adsorption capacity was 16.61 mgg^?1 at pH 3.0 for particle sizes of 125–180 µm. Pb(II) removal increased as the pH increased from 2 to 4 and remained constant up to pH 10.0. Desorption studies were also carried out with dilute hydrochloric acid to recover both carbon and Pb(II). Quantitative desorption of Pb(II) from carbon indicates that adsorption of metal ion is by ion exchange. © 2002 Society of Chemical Industry     

Investigation of Pb(II) adsorption onto natural and synthetic polymers

Adsorption of toxic metal ion Pb(II) onto two different insoluble humic acids (IHAs) obtained from Beysehir (BIHA) and Ermenek (EIHA) low grade lignites and two synthesized terpolymers: styrene-divinylbenzene-methacrylic acid (SDBM) and styrene-divinylbenzene allylmethacrylate (SDBAM) were investigated and compared with commercial activated carbon (AC). The synthesized polymers were characterized by FTIR. Effects of pH (in neutral and acidic range), time, and initial metal concentration on the effectiveness of IHAs and terpolymers were determined. All synthesized adsorbents could adsorb Pb(II) with much higher capacity at half of the retention of AC in acidic medium. The adsorption capacities varied in the range of 51–76 mg g⁻¹. The affinity order of polymers in acidic medium for Pb(II) ions was observed as: SDBAM>SDBM>BIHA≈EIHA>AC. IHAs fit Freundlich model while SDB polymers were fitting Langmuir isotherm. The maximum adsorption capacities in neutral medium were 48 mg g⁻¹ for SDBM and 15 mg g⁻¹ for BIHA. Desorption studies for the polymer of highest performance indicated that about 90% desorption was achieved at 5 h by using EDTA regenerant solution. The polymer can be used repeatedly in Pb(II) adsorption with close capacities to initial use. The higher selectivity of SDBAM to Pb(II) ions in multimetal solution was also indicated in the study. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Adsorption of Pb(II) Ions Using Humic Acid Coated Chitosan-Tripolyphosphate (HA-CTPP) Beads

A new humic acid (HA) based adsorbent was prepared by coating humic acid on chitosan tripolyphosphate (CTPP) beads. Humic acid-chitosan tripolyphosphate (HA-CTPP) beads thus obtained were characterized using Fourier Transform Infrared Spectroscopy and Scanning Electron Microscopy. Swelling capacity studies of CTPP and HA-CTPP beads conducted in the pH range, pH = 1–10 showed that HA-CTPP beads are more stable against swelling than CTPP beads. Equilibration of HA-CTPP beads in water for different pH showed that leaching of HA from the beads is negligible and the beads are stable for adsorption applications. Adsorption of Pb(II) ions onto HA-CTPP beads were studied as a function of various operational parameters such as initial pH, metal ion concentration, and contact time. The results showed that HA-CTPP beads are suitable for Pb(II) ions adsorption and the kinetics of sorption very well fit into pseudo-second order model. The Langmuir model was found to be more suitable for explaining the observed adsorption data, giving a theoretical maximum adsorption capacity of 223.7 mg/g. HA-CTPP beads could possibly find application in the treatment of waste water contaminated with other toxic and/or heavy metals.     

Adsorption characterization of lead(II) and cadmium(II) on crosslinked carboxymethyl starch

The adsorption of Pb(II) and Cd(II) ions with crosslinked carboxymethyl starch (CCS) was investigated as function of the solution pH, contact time, initial metal‐ion concentration, and temperature. Isotherm studies revealed that the adsorption of metal ions onto CCS better followed the Langmuir isotherm and the Dubinin–Radushkevich isotherm with adsorption maximum capacities of about 80.0 and 47.0 mg/g for Pb(II) and Cd(II) ions, respectively. The mean free energies of adsorption were found to be between 8 and 16 kJ/mol for Pb(II) and Cd(II) ions; this suggested that the adsorption of Pb(II) and Cd(II) ions onto CCS occurred with an ion‐exchange process. For two‐target heavy‐metal ion adsorption, a pseudo‐second‐order model and intraparticle diffusion seem significant in the rate‐controlling step, but the pseudo‐second‐order chemical reaction kinetics provide the best correlation for the experimental data. The enthalpy change for the process was found to be exothermic, and the ΔS^θ values were calculated to be negative for the adsorption of Pb(II) and Cd(II) ions onto CCS. Negative free enthalpy change values indicated that the adsorption process was feasible. The studies of the kinetics, isotherm, and thermodynamics indicated that the adsorption of CCS was more effective for Pb(II) ions than for Cd(II) ions. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Modification and characterization of poly (ethylene terephthalate)‐grafted‐acrylic acid/acryl amide fiber for removal of lead from human plasma and environmental samples

A new fibrous adsorbent was prepared by grafting acrylic acid/acryl amide (AA/AAm) comonomers onto poly (ethylene terephthalate) (PET) fibers. The resulting sorbent has been characterized by Fourier transform infrared (FT‐IR), elemental analysis, thermogravimetric analysis (TGA), FT‐Raman, and scanning electron microscopy (SEM) and studied for the preconcentration and determination of trace Pb (II) ion from human biological fluid and environmental water samples. The optimum pH value for sorption of the metal ion was 8. The sorption capacity of functionalized resin is 44.1 mg g^?1. The chelating sorbent can be reused for 20 cycles of sorption–desorption without any significant change in sorption capacity. A recovery of 100.2% was obtained for the metal ion with 0.5M nitric acid as eluting agent. Effect of grafting yield, shaking time, shape of sorbent, and pH of the medium on adsorption of the metal ion were investigated. Scatchard analysis revealed that the homogeneous binding sites were formed in the polymers. The equilibrium adsorption data of Pb (II) on modified fiber were analyzed by Langmuir, Freundlich, Temkin, and Redlich‐Peterson models. Based on equilibrium adsorption data, the Langmuir, Freundlich, and Temkin constants were determined as 0.236, 10.544, and 9.497 at pH 8 and 20°C, respectively. The method was applied for lead ions determination from human plasma and sea water sample. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation of amidoximated polyester fiber and competitive adsorption of some heavy metal ions from aqueous solution onto this fiber

In this study, a fibrous adsorbent containing amidoxime groups was prepared by graft copolymerization of acrylonitrile (AN) onto poly(ethylene terephthalate) (PET) fibers using benzoyl peroxide (Bz₂O₂) as initiator in aqueous solution, and subsequent chemical modification of cyano groups by reaction with hydroxylamine hydrochloride in methanol. The grafted and modified fibers were characterized by FTIR, TGA, SEM, and XRD analysis. The crystallinity increased, but thermal stability decreased with grafting and amidoximation. The removal of Cu(II), Ni(II), Co(II), Pb(II), and Cd(II) ions from aqueous solution onto chelating fibers were studied using batch adsorption method. These properties were investigated under competitive conditions. The effects of the pH, contact time, and initial ion concentration on the removal percentage of ions were studied. The results show that the adsorption rate of metal ions followed the given order Co(II) > Pb(II) > Cd(II) > Ni(II) > Cu(II). The percentage removal of ions increased with initial ion concentration, shaking time, and pH of the medium. Total metal ion removal capacity was 49.75 mg/g fiber on amidoximated fiber. It was observed that amidoximated fibers can be regenerated by acid without losing their activity, and it is more selective for Pb(II) ions in the mixed solution of Pb‐Cu‐Ni–Co‐Cd at pH 4. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Removal of Copper(II) and Zinc(II) from Aqueous Solutions Using a Lignocellulosic-Based Polymeric Adsorbent Containing Amidoxime Chelating Functional Groups

In this study, the adsorption of Cu(II) and Zn(II) ions from aqueous solutions onto amidoximated polymerized banana stem (APBS) has been investigated. Infrared spectroscopy was used to confirm graft copolymer formation and amidoxime functionalization. The different variables affecting the sorption capacity such as pH of the solution, adsorption time, initial metal ion concentration, and temperature have been investigated. The optimum pH for maximum adsorption was 10.5 (99.99%) for Zn²⁺ and 6.0 (99.0%) for Cu²⁺ at an initial concentration of 10 mg L^?1. Equilibrium was achieved approximately within 3 h. The experimental kinetic data were analyzed using pseudo-first-order and pseudo-second-order kinetic models and are well fitted with pseudo- second-order kinetics. The thermodynamic activation parameters such as ΔG^o, ΔH^o, and ΔS^o were determined to predict the nature of adsorption. The temperature dependence indicates an exothermic process. The experimental isotherm data were well fitted to the Langmuir model with maximum adsorption capacities of 42.32 and 85.89 mg g^?1 for Cu(II) and Zn(II), respectively, at 20°C. The adsorption efficiency was tested using industrial effluents. Repeated adsorption/regeneration cycles show the feasibility of the APBS for the removal of Cu(II) and Zn(II) ions from water and industrial effluents.     

Preparation and application of glycidyl methacrylate and methacrylic acid monomer mixture‐grafted poly(ethylene terephthalate) fibers for removal of methylene blue from aqueous solution

A novel fibrous adsorbent that grafts glycidyl methacrylate (GMA) and methacrylic acid (MAA) monomer mixture onto poly(ethylene terephthalate) (PET) fibers was used for removal of methylene blue (MB) in aqueous solutions by a batch equilibration technique. The operation parameters investigated included, pH of solution, removal time, graft yield, dye concentration, and reaction temperature. The adsorption rate of MB is much higher on the MAA/GMA‐grafted PET fibers than on the ungrafted PET fibers. MB was removed 99% the initial dye concentration at 10 mg L⁻¹ and 93% at 200 mg L⁻¹ by monomers mixture‐grafted PET fibers. Pseudofirst order and pseudosecond order kinetic equations were used to examine the experimental data of different graft yield. It was found that the pseudosecond order kinetic equation described the data of dye adsorption on fibrous adsorbent very well. The experimental isotherms data were analyzed using Langmuir and Freundlich isotherm models. The data was that Freundlich isotherm model fits the data very well for the dyes on the fibers adsorbent. The dye adsorbed was easily desorbed by treating with acetic acid/methanol mixture (50% V/V) at room temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Biosorption of Pb(II) ions from aqueous solution by pine bark (Pinus brutia Ten.)

The biosorption potential of pine (Pinus brutia Ten.) bark in a batch system for the removal of Pb(II) ions from aqueous solutions was investigated. The biosorption characteristics of Pb(II) ions on the pine bark was investigated with respect to well-established effective parameters including the effects of solution pH, initial Pb(II) concentration, mass of bark, temperature, and interfering ions present, reusability, and desorption. Initial solution pH and contact time were optimized to 4.0 and 4 h, respectively. The Langmuir and Freundlich equilibrium adsorption models were studied and observed to fit well. The maximum adsorption capacity of the bark for Pb(II) was found to be 76.8 mg g⁻¹ by Langmuir isotherms (mass of bark: 1.0 g L⁻¹). The kinetic data fitted the pseudo-second-order model with correlation coefficient greater than 0.99. The thermodynamic parameters Gibbs free energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) changes were also calculated, and the values indicated that the biosorption process was spontaneous. Reutilization of the biosorbent was feasible with a 90.7% desorption efficiency using 0.5 M HCl. It was concluded that pine bark can be used as an effective, low cost, and environmentally friendly biosorbent for the removal of Pb(II) ions from aqueous solution.     

Adsorption of copper(II), cobalt(II), and iron(III) ions from aqueous solutions on poly(ethylene terephthalate) fibers

The adsorption behavior of poly(ethylene terephthalate) (PET) fibers towards copper(II), cobalt(II), and iron(III) ions in aqueous solutions was studied by a batch equilibriation technique. Influence of treatment time, temperature, pH of the solution, and metal ion concentration on the adsorption were investigated. Adsorption values for metal ion intake followed the following order: Co(II) > Cu(II) > Fe(III). One hour of adsorption time was found sufficient to reach adsorption equilibrium for all the ions. The rate of adsorption was found to decrease with the increase in the temperature. Langmuir adsorption isoterm curves were found to be significant for all the ions studied. The heat of adsorption values were calculated as −5, −2.8, and −3.6 kcal/mol for Cu(II), Co(II), and Fe(III) ions, respectively. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1935–1939, 1998     

Adsorption and desorption behaviour of Pb(II) on a natural kaolin: equilibrium,kinetic and thermodynamic studies

BACKGROUND: Pb(II) is common in both waste‐waters and gas emissions. In developing countries, public health problems have been reported concerning Pb(II) pollution, so that stringent measures are required to deal with it. MAJOR RESULTS: The adsorption and desorption behaviour of Pb(II) has been investigated on a natural Chinese kaolin. Several factors, including initial concentration, pH, equilibration time, dosage and temperature correlated positively with Pb(II) adsorption. The Pb(II) adsorption capacity of natural kaolin was 165.117 mg g^?1. A kinetic study shows that Pb(II) adsorption on purified kaolin equilibrates within 35 min. The enthalpy changes of Pb(II) adsorption on purified kaolin were 63.683, 20.488 and 21.371 kJ mol^?1 with entropy changes 262.250, 112.210 and 105.120 J mol^?1 K^?1 for solutions containing 50, 100 and 200 mg L^?1 Pb(II) respectively, indicating an endothermic and spontaneous adsorption process. The desorption of Pb(II) from kaolin was difficult with more than 85% Pb(II) removal. Based on X‐ray diffraction (XRD) analysis, the Pb(II) adsorption on natural and purified kaolin was attributed mainly to the magnesite component and complexation with the mineral surface. CONCLUSIONS: Natural kaolin exhibits a satisfactory performance for adsorption of Pb(II) from aqueous solution. The optimum conditions for adsorption were: ionic strength = 0.01 mol L^?1; pH ≥ 7.2; dosage = 10 g L^?1; temperature = 25 °C; duration ≥ 16 h (C_i = 80 mg L^?1); and the optimum conditions for desorption were ionic strength = 0.1 mol L^?1 and pH ≤ 5.0. Copyright © 2009 Society of Chemical Industry     

Adsorption properties of poly(acrylaminophosphonic-carboxyl-hydrazide)type chelating fiber for heavy metal ions

In this article, the adsorption properties of poly(acrylaminophosphonic-carboxyl-hydrazide) chelating fibers for Cu(II), Cd(II), Co(II), Mn(II), Pb(II), Zn(II), Ni(II), and Cr(III) are investigated by a batch technique. Based on the research results of binding capacity, adsorption isotherm, effect of pH value on sorption, and adsorption kinetics experiments, it is shown that the poly(acrylaminophosphonic-carboxyl-hydrazide) chelating fibers have higher binding capacities and good adsorption kinetic properties for heavy metal ions. The sorption of the metal ions on the chelating fibers is strongly dependent on the equilibrium pH value of the solution. The adsorption isotherms of Cu(II) and Cd(II) on the chelating fiber exhibit a Langmuir-type equation. The adsorbed Cu(II), Cd(II), Zn(II), and Pb(II) could be eluted by diluted nitric acid. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 70: 7–14, 1998     

Preparation and characterization of an IPN type chelating resin containing amino and carboxyl groups for removal of Cu(II) from aqueous solutions

A novel IPN type chelating resin, amino-functionalized poly (glycidyl methacrylate)/poly (acrylic acid), (pGMA/pAA), was synthesized by a combination of serial reactions including, conventional radical polymerization, amination and photopolymerization. To assess the efficacy and characteristics of the resin in removal of Cu (II), batch adsorption experiments were carried out, and the effects of different parameters such as contact time, adsorbent dosage, initial metal ion concentration, temperature, and pH on the adsorption process were investigated. The results showed that 0.5 g/L dosage and pH 5 are the optimum values to achieve the maximum adsorption capacity and the adsorption kinetic of Cu (II) was well represented by pseudo-second-order kinetic model. In addition, it was found that the adsorption was mainly controlled by the film diffusion mechanism, along with a considerable contribution of the intra-particle diffusion mechanism, and Langmuir, Freundlich and Dubinin–Radushkevich (D–R) isotherm models can be used for interpreting the adsorption process. Moreover, FT-IR analysis results and the mean free energies of adsorption clearly indicate that the ion exchange and chelation mechanisms took place as dominating mechanisms simultaneously during the adsorption process. It was also found to be that IPN resin could be used at least four times without losing its original activity.     

High surface area-activated carbon from Glycyrrhiza glabra residue by ZnCl2 activation for removal of Pb(II) and Ni(II) from water samples

A high-surface-area activated carbon was prepared by chemical activation of Glycyrrhiza glabra residue with ZnCl₂ as active agent. Then, the adsorption behavior of Pb(II) and Ni(II) ion onto produced activated carbon has been studied. The experimental data were fitted to various isotherm models. According to Langmuir model, the maximum adsorption capacity of Pb(II) and Ni(II) ions were found to be 200 and 166.7 mg g⁻¹, respectively, at room temperature. Kinetic studies showed the adsorption process followed pseudo second-order rate model. High values of intra-particle rate constants calculated shows the high tendency of activated carbon for removal of Pb(II) and Ni(II) ions.     

Removal of Cd（II） by Nanometer AIO（OH） Loaded on Fiberglass with Activated Carbon Fiber Felt as Carrier

A new nanometer material, nanometer AlO（OH） loaded on the fiberglass with activated carbon fibers felt（ACF） as the carrier, was prepared by hydrolytic reaction for the removal of Cd（II） from aqueous solution using column adsorption experiment. As was confirmed by XRD determination, the hydrolysis production loaded on fiberglass was similar to the orthorhombic phase AlO（OH）. SEM images showed that AlO（OH） particles were in the form of small aggregated clusters. The Thomas model was applied for estimating the kinetic parameters and the saturated adsorption ability of Cd（II） adsorption on the new adsorbent. The results showed that the maximum adsorption capacity of Cd（II） was 128.50 mg·g^-1 and 117.86 mg·g^-1 for the adsorbent mass of 0.3289 g and the adsorbent mass of 0.2867 g, respectively. The elution experiment result indicated that the adsorbed Cd ions was easily desorbed from the material with 0.1 mol·L^-1 HCl solution. Adsorption-desorption cycles showed the feasibility of repealed uses of the composited material. The adsorption capacities were influenced by pH and the initial Cd（II） concentration. The amount adsorbed was greatest at pH 6.5 and the initial Cd（II） concentration of 0.07 mg·L^-1, respectively. Nanometer AlO（OH） played a major role in the adsorption process, whereas the fiberglass and ACF were assistants in the process of removing Cd（II）. In addition, the adsorption capacities for Cd（II） were obviously reduced from 128.50 mg·L^-1 to 64.28 mg·L^-1 when Pb ions were present because Pb ions took up more adsorption sites.