Poly(methyl methacrylate)‐grafted cellulose nanocrystals: One‐step synthesis,nanocomposite preparation,and characterization

Cellulose nanocrystals (CNCs) are ideal reinforcing agents for polymer nanocomposites because they are lightweight and nano‐sized with a large aspect ratio and high elastic modulus. To overcome the poor compatibility of hydrophilic CNCs in non‐polar composite matrices, we grafted poly(methyl methacrylate) (PMMA) from the surface of CNCs using an aqueous, one‐pot, free radical polymerization method with ceric ammonium nitrate as the initiator. The hybrid nanoparticles were characterized by CP/MAS NMR, X‐ray photoelectron spectroscopy, infrared spectroscopy, contact angle, thermogravimetric analysis, X‐ray diffraction, and atomic force microscopy. Spectroscopy demonstrates that 0.11 g/g (11 wt %) PMMA is grafted from the CNC surface, giving PMMA‐g‐CNCs, which are similar in size and crystallinity to unmodified CNCs but have an onset of thermal degradation 45 °C lower. Nanocomposites were prepared by compounding unmodified CNCs and PMMA‐g‐CNCs (0.0025–0.02 g/g (0.25–2 wt %) loading) with PMMA using melt mixing and wet ball milling. CNCs improved the performance of melt‐mixed nanocomposites at 0.02 g/g (2 wt %) loading compared to the PMMA control, while lower loadings of CNCs and all loadings of PMMA‐g‐CNCs did not. The difference in Young's modulus between unmodified CNC and polymer‐grafted CNC composites was generally insignificant. Overall, ball‐milled composites had inferior mechanical and rheological properties compared to melt‐mixed composites. Scanning electron microscopy showed aggregation in the samples with CNCs, but more pronounced aggregation with PMMA‐g‐CNCs. Despite improving interfacial compatibility between the nanoparticles and the matrix, the effect of PMMA‐g‐CNC aggregation and decreased thermal stability dominated the composite performance.     

Studies on the effect of anions of various lithium salts in PEMA gel polymer electrolytes

This research synthesized graft copolymers of chitosan‐g‐poly(N‐isopropyl acrylamide) (CS‐g‐PNIPAAm) by UV‐initiated free‐radical polymerization of NIPAAm monomer to CS selectively at the C‐6 position of pyranose ring. First, amino groups in CS were protected by reaction with phthalic anhydride (PA) to form PACS. The degree of phthaloylation was carefully controlled to ensure that most amino groups were protected, and only a very small amount of hydroxyl groups were reacted. In the second step, the vinyl functional group was introduced to the PACS by reaction with a vinyl compound containing an isocyanate group (3‐isopropenyl‐αα′‐dimethylbenzyl isocyanate), through the urethane linkage with hydroxyl groups at the C‐6 position. The phthaloyl groups were then removed by hydrazine to recover the amino groups in CS. Finally, PNIPAAm was grafted to the vinyl CS at the C‐6 position by UV‐initiated free‐radical polymerization. The synthesized CS‐g‐PNIPAAm copolymers were confirmed to have a structure of an AB‐crosslinked graft copolymer. Respectively, these copolymer hydrogels exhibited pH‐ and thermal‐responsive swelling properties in an aqueous solution due to their CS and PNIPAAm components. The test of cell viability with L929 fibroblast revealed that the CS‐g‐PNIPAAm copolymers having a grafting ratio lower than 1.7 had cellular compatibility as good as pure CS. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of in situ synthesized macroactivator on morphology of PA6/PS blends via successive polymerization

In situ polymerization and in situ compatibilization was adopted for preparation of ternary PA6/PS‐g‐PA6/PS blends by means of successive polymerization of styrene, with TMI and ε‐caprolactam, via free radical copolymerization and anionic ring‐opening polymerization, respectively. Copolymer poly(St‐g‐TMI), the chain of which bears isocyanate (? NCO), acts as a macroactivator to initiate PA6 chain growth from the PS chain and graft copolymer of PS‐g‐PA6 and pure PA6 form, simultaneously. The effect of the macroactivator poly(St‐g‐TMI) on the phase morphology was investigated in detail, using scanning electron microscopy. In case of blends with higher content of PS‐g‐PA6 copolymer, copolymer nanoparticles coexisting with the PS formed the matrix, in which PA6 microspheres were dispersed evenly as minor phase. The content of the compositions (homopolystyrene, homopolyamide 6, and PS‐g‐PA6) of the blends were determined by selective solvent extraction technique. The mechanical properties of PA6/PS‐g‐PA6/PS blends were better than that of PA6/PS blends. Especially for the blends T10 with lower PS‐g‐PA6 copolymer content, both the flexural strength and flexural modulus showed significantly improving because of the improved interfacial adhesion between PS and PA6. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Free‐radical grafting of trans‐ethylene‐1,2‐dicarboxylic acid onto molten ethylene‐vinyl acetate copolymer

Distinctive features of free‐radical grafting of trans‐ethylene‐1,2‐dicarboxylic acid (TEDA) onto macromolecules of molten ethylene‐vinyl acetate copolymer (EVA) in the course of reactive extrusion have been investigated along with structure, mechanical characteristics, and high‐elastic properties of molten functionalized products (EVA‐g‐TEDA). It is shown that EVA‐g‐TEDA yield depends on both the peroxide initiator concentration and content of vinyl acetate units in the copolymer molecular structure. At functionalization, acid grafting is accompanied by secondary reactions of macromolecular degradation and crosslinking. With a low‐peroxide initiator concentration (0.1 wt %), degradation prevails; with a higher (0.3 wt %) concentration, crosslinking of macromolecules prevails. It is reported that monomers being grafted attach mostly over secondary carbon atoms in the polymer chain. EVA‐g‐TEDA appears to have a less perfect crystal structure with a lower‐melting temperature and crystallinity as against the starting polymer. The functionalized products display enhanced rigidity and lower deformability in comparison with the initial copolymer. Variations in the swelling ratio and melt strength of EVA‐g‐TEDA depend on the course of competing secondary processes of macromolecular degradation and crosslinking. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effects of addition of functionalized SEBS on rheological,mechanical, and tribological properties of polyamide 6 nanocomposites

The effects of the addition of styrene‐ethylene/butylene‐styrene copolymer (SEBS) with various functionalized groups on the rheological, mechanical, and tribological properties on polyamide 6 nanocomposite filled with layered silicate (PA6/Clay) were investigated. Four types of SEBS: unmodified SEBS (SEBS), maleic anhydride grafted SEBS (SEBS‐g‐MA), amine group grafted SEBS (SEBS‐g‐NH₂), and carboxyl group grafted SEBS (SEBS‐g‐COOH) were added with PA6/Clay nanocomposite to prepare various polymer blends. These polymer blends were extruded by a twin screw extruder and injection molded. Dynamic viscoelastic properties of these blends in the molten state and their tensile, impact, and tribological properties were evaluated. The viscoelastic properties were found to increase with the addition of SEBS and were highly influenced by the types of functionalized groups contained. Influence of the addition of SEBS on the mechanical properties of these systems differed for each mechanical property. Although the tensile properties decreased with SEBS, Izod impact properties improved with the addition of various functionalized SEBS. These mechanical properties and viscoelastic properties correlated closely with the size of dispersed SEBS particles and interparticle distance. The tribological properties also improved with the addition of SEBS, and the influence of the amount added was higher than the type of SEBS used. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Epoxy‐Based Azopolymers with Enhanced Photoresponsive Properties Obtained by Cationic Homopolymerization

Azopolymers are highly versatile materials due to their unique photoresponsive properties. In this contribution, a novel azo‐modified epoxy network is synthesized by cationic homopolymerization with boron trifluoride monoethylamine (BF₃.MEA) complex as initiator. The effect of the addition of a fixed content of amino‐functionalized azo chromophore, Disperse Orange 3, into the polymer matrix is studied in detail. First of all, the thermal curing cycle is optimized by means of differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) measurements. Then, the resulting bulk azo‐modified epoxy networks are characterized by means of thermogravimetric analysis (TGA), FTIR, DSC, UV–vis spectroscopy, and rheological measurements. Finally, the optical response of thin films of these materials is determined. The results evidence that azo‐modified epoxy networks obtained by cationic polymerization with optimized curing cycle display high T _g values, high maximum photoinduced birefringence, fast writing speed, and exceptionally high remnant anisotropy. Therefore, this material is a promising candidate to be used for optical storage applications.     

Preparation of poly(methyl methacrylate)‐grafted attapulgite by surface‐Initiated radical polymerization

Poly(methyl methacrylate) (PMMA) was bonded on the surface of attapulgite (ATP) by using an ammonium persulfate amine redox initiation system via grafting from approach. ATP was modified with (3‐aminopropyl)triethoxysilane to anchor amine groups on the surface, and then the amine‐functionalized ATP was further treated with methacryloyl chloride and 4,4′‐azobis(4‐cyanovaleric acid) to give methacryl‐ and azo‐functionalized ATP, respectively. Subsequently, surface‐initiated graft polymerization of MMA in a soap‐free emulsion was performed to afford ATP/PMMA hybrids. Meanwhile, graft polymerizations on the surface of methacryl‐ and azo‐functionalized ATP were carried out for comparison. The grafting of PMMA on the surface of ATP was characterized by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and thermogravimetric analysis (TGA). The crystal structure of hybrids was characterized by X‐ray diffraction analysis. The morphology of hybrids was observed by scanning electron microscopy and transmission electron microscopy. The degree of grafting obtained from surface‐initiated graft polymerization in a soap‐free emulsion was found to be the greatest (29.4%) estimated from TGA. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41062.     

Synthesis and properties of reactively compatibilized polyester and polyamide blends

The functionalization of poly(butylene terephthalate) (PBT) has been accomplished in a twin screw extruder by grafting maleic anhydride (MA) using a free radical polymerization technique. The resulting PBT‐g‐MA was successfully used as a compatibilizer for the binary blends of polyester (PBT) and polyamide (PA66). Enhanced mechanical properties were achieved for the blend containing a small amount (as low as 2.5 %) of PBT‐g‐MA compared to the binary blend of unmodified PBT with PA66. Loss and storage moduli for blends containing compatibilizer were higher than those of uncompatibilized blends or their respective polymers. The grafting and compatibilization reactions were confirmed using FTIR and ¹³C NMR spectroscopy. The properties of these blends were studied in detail by varying the amount of compatibilizer, and the improved mechanical behaviour was correlated with the morphology with the help of scanning electron microscopy. Morphology studies also revealed the interfacial interaction in the blend containing grafted PBT. The improvement in the properties of these blends can be attributed to the effective interaction of grafted maleic anhydride groups with the amino group in PA66. The results indicate that PBT‐g‐MA acts as an effective compatibilizer for the immiscible blends of PBT and PA66. © 2000 Society of Chemical Industry     

Toughening of polyamide 6 with a maleic anhydride functionalized acrylonitrile–butadiene–styrene copolymer

Maleic anhydride functionalized acrylonitrile–butadiene–styrene (ABS‐g‐MA) copolymers were prepared via an emulsion polymerization process. The ABS‐g‐MA copolymers were used to toughen polyamide 6 (PA‐6). Fourier transform infrared results show that the maleic anhydride (MA) grafted onto the polybutadiene phase of acrylonitrile–butadiene–styrene (ABS). Rheological testing identified chemical reactions between PA‐6 and ABS‐g‐MA. Transmission electron microscopy and scanning electron microscopy displayed the compatibilization reactions between MA of ABS‐g‐MA and the amine and/or amide groups of PA‐6 chain ends, which improved the disperse morphology of the ABS‐g‐MA copolymers in the PA‐6 matrix. The blends compatibilized with ABS‐g‐MA exhibited notched impact strengths of more than 900 J/m. A 1 wt % concentration of MA in ABS‐g‐MA appeared sufficient to improve the impact properties and decreased the brittle–ductile transition temperature from 50 to 10°C. Scanning electron microscopy results show that the shear yielding of the PA‐6 matrix was the major toughening mechanism. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Influence of epoxy resin on the properties of maleic anhydride functionalized acrylonitrile–butadiene–styrene copolymer toughened polyamide 6 blends

Maleic anhydride functionalized acrylonitrile–butadiene–styrene copolymer (ABS‐g‐MA) was used as an impact modifier of polyamide 6 (PA6). Epoxy resin was introduced into PA6/ABS‐g‐MA blends to further improve their properties. Notched Izod impact tests showed that the impact strength of PA6/ABS‐g‐MA could be improved from 253 to 800 J/m with the addition of epoxy resin when the ABS‐g‐MA content was set at 25 wt %. Differential scanning calorimetry results showed that the addition of epoxy resin made the crystallization temperature and melting temperature shift to lower temperatures; this indicated the decrease in the PA6 crystallization ability. Dynamic mechanical analysis testing showed that the addition of epoxy resin induced the glass‐transition temperature of PA6 and the styrene‐co‐acrylonitrile copolymer phase to shift to higher temperatures due to the chemical reactions between PA6, ABS‐g‐MA, and epoxy resin. The scanning electron microscopy results indicated that the ABS‐g‐MA copolymer dispersed into the PA6 matrix uniformly and that the phase morphology of the PA6/ABS‐g‐MA blends did not change with the addition of the epoxy resin. Transmission electron microscopy showed that the epoxy resin did not change the deformation mechanisms of the PA6/ABS‐g‐MA blends. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Polyamide4‐block‐poly(vinyl acetate) via a polyamide4 azo macromolecular initiator: Thermal and mechanical behavior,biodegradation, and morphology

A series of polyamide4‐block‐poly(vinyl acetate)s were synthesized by the radical polymerization of vinyl acetate (VAc) using an azo macromolecular initiator composed of polyamide4 (PA4). The block copolymers were investigated by examining their molecular weight, structure, thermal and mechanical properties, biodegradation, and the morphology of the film surface. The compositions and molecular weights (Mw) ranging from 46,800 to 163,700 g mol^?1 of the block copolymers varied linearly with increasing molar ratio of VAc to azo‐PA4. The block copolymers have high melting points of 248.2–262.5°C owing to PA4 blocks and heats of fusion, which were linearly dependent on the PA4 content. The mechanical properties of the block copolymers were monotonically dependent on the composition, i.e., increasing the PA4 content increased the tensile strength, whereas increasing the poly(vinyl acetate) content increased the elongation at break. The morphology of the block copolymers suggested the appearance of microphase separation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42466.     

Melt processing of polyamide 12 and cellulose nanocrystals nanocomposites

The fabrication of nanocomposites of polyamide 12 (PA12) and cellulose nanocrystals (CNCs) isolated from cotton and tunicates is reported. Through a comparative study that involved solution‐cast (SC) and melt‐processed materials, it was shown that PA12/CNC nanocomposites can be prepared in a process that appears to be readily scalable to an industrial level. The results demonstrate that CNCs isolated from the biomass by phosphoric acid hydrolysis display both a sufficiently high thermal stability to permit melt processing with PA12, and a high compatibility with this polymer to allow the formation of nanocomposites in which the CNCs are well dispersed. Thus, PA12/CNC nanocomposites prepared by melt‐mixing the two components in a co‐rotating roller blade mixer and subsequent compression molding display mechanical properties that are comparable to those of SC reference materials. Young's modulus and maximum stress could be doubled in comparison to the neat PA12 by introduction of 10% (CNCs from tunicates) or 15% w/w (CNCs from cotton) CNCs. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42752.     

Synthesis and characterization of crosslinkable latex with interpenetrating network structure based on polystyrene and polyacrylate

Functional poly[styrene‐co‐(2‐ethylhexyl acrylate)‐co‐(1,6‐hexanediol diacrylate)]/poly[(methyl methacrylate)‐co‐(butyl acrylate)‐co‐(methacrylic acid)‐co‐(diacetone acrylamide)] (PS/PA) semi‐interpenetrating polymer networks (semi‐LIPNs) containing ketone carboxyl groups were synthesized by two‐stage emulsion polymerization, and characterized by Fourier transform infrared, transmission electron microscopy, dynamic light scattering and DSC. A unique feature of the PS/PA semi‐LIPNs is their ability to crosslink and form thermosetting full‐IPN polymers through the reaction of ketone carboxyl and hydrazide in the course of film formation at ambient temperatures. Series of latex particles with various levels of crosslinking density in the PS and PA domain and varied composition of PS/PA LIPNs were obtained. The effects of the LIPN PS/PA composition and the level of crosslinking density in the PS and PA domain on film density, swell ratio, mechanical properties and contact angle with water were investigated. Maximum synergy effects obtained at around 50/50 (PS/PA) in terms of mechanical properties, density and contact angle with water indicate that the maximum degree of interpenetration is obtained at this composition. Copyright © 2006 Society of Chemical Industry     

Electron beam crosslinking of fluoroalkoxy,methoxyethoxyethoxy, and substituted phenoxy polyphosphazenes: Physical and chemical characterization and comparison to a thermally induced free radical process and ionic complexation

Electron beam, thermal free radical, and cationic complexation mechanisms have been employed to investigate crosslinking in selected polyphosphazenes. In polyphosphazenes functionalized with o‐allylphenol to facilitate free radical crosslinking, maximum crosslink density was achieved after 10 min at 130°C utilizing benzoyl peroxide as an initiator. Electron beam radiation was found to give an increased crosslink density with increased dose. The dose–crosslink density relationship observed for a aryloxyphosphazene terpolymer PPXP also was seen in poly[bis(2,2′‐(methoxyethoxy)ethoxy)phosphazene] (MEEP). However, with two lots of a fluoroalkoxyphosphazene an initial crosslink density was achieved at a lower electron beam exposure with no additional crosslink density observed with increasing dose. These measurements are observations of net crosslinking, which is the result of crosslinking processes balanced by chain scission processes. DSC revealed that neither thermal‐ nor electron beam‐initiated crosslinking cause any significant change in the T_g of the polymer. Metal ion complexation with MEEP consistently gave T_g values that were higher than MEEP. The T_g values measured for both MEEP and the lithium‐complexed MEEP were unaffected by electron beam irradiation. These data suggest the location of lithium complexation may be at the nitrogen lone electron pair on the backbone, representing a new mechanism of lithium complexation in phosphazenes. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 55–66, 2000     

Synthesis and thermomechanical properties of allyl‐functionalized polycaprolactone urethane‐co‐2‐hydroxylethyl methacrylate networks

PCL‐segmented multiallyl‐functionalized poly (ester urethane) prepolymers (PEUs) were prepared in a two‐step process. First, hydroxyl‐terminated PCL and glycerol simultaneously reacted with an excess of a diisocyanate, the obtained isocyanate functionalized prepolymers then reacts with allyl amine. PEUs structure choice mainly focused on two aspects: the PCL segments concentration and the allyl functionality that, respectively, affects the biodegradability and the density of the issued networks. The concentrations of the different reactants were fixed, taking into account the desired mean structure and also to prevent crosslinking during the synthesis of the prepolymers. FTIR was principally used to monitor the synthesis of allyl functionalized PEUs. The carbonyl absorption of PCL, initially located at 1720 cm^?1, reaction of the PCL and shifted toward 1730 cm^?1, due to a decrease in crystallinity as confirmed by DSC. The structure of allyl‐functionalized PCL‐segmented PEU analyzed by ¹H NMR, double bond content was between 0.2 and 1.2 mmol g^?1. Networks were obtained by UV‐initiated radical copolymerization of allyl‐functionalized PEUs and HEMA. The effects of PCL concentration and molar mass on their thermomechanical and thermal properties were analyzed. Particular damping properties were obtained. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41295.     

Preparation and properties of compatibilized PVC/SMA‐g‐PA6 blends

The morphology and mechanical properties of PVC/SMA‐g‐PA6 blends were investigated in this paper. Graft to polymer SMA‐g‐PA6 was prepared via a solution graft reaction between SMA and PA6. FTIR test evidences the occurrence of the graft reaction between SMA and PA6. DSC analysis shows that SMA‐g‐PA6 has a lower melting point of 187°C, which may result in a decrease in crystallinity of PA6 and thus enable efficient blending of SMA‐g‐PA6 and PVC. Compatibilization was evidenced by the dramatic increase in mechanical properties, the smaller particle size and finer dispersion of PA6 in PVC matrix, and, further, a cocontinuous morphology at 16 wt % SMA‐g‐PA6 content. SMA‐g‐PA6 from the solution graft reaction can toughen and reinforce PVC material. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 432–439, 2004     

Cross‐linking and grafting with PS of EPDM in the presence of Lewis acids

With Lewis Acids as catalysts in melt system, the influence of kinds of Lewis Acids, dosages of catalysts on the behaviors of crosslinking and grafting of ethylene–propylene–diene rubber (EPDM) were investigated. The Lewis Acids, such as anhydrous AlCl₃, FeCl₃, SnCl₄, could initiate the crosslinking of EPDM and the grafting between EPDM and polystyrene (PS). The carbon–carbon double bonds existing on EPDM chain were favorable to the formation of the initial carbocation in the presence of Lewis Acids. The carbocation initiated carbonium ion polymerization between the unsaturated bonds, or substituted for a proton from the phenyl in the presence of PS forming EPDM‐g‐PS copolymer. Anhydrous aluminum chloride was found to be an efficient catalyst and its initiating temperatures for crosslinking or grafting were about 110°C. The amounts of gel and the data of torques showed that there was a competition between the crosslinking‐grafting reaction and the degradation of blending components in the presence of AlCl₃. The EPDM‐g‐PS copolymer served as a compatibilizer in the EPDM/PS blends and enhanced the mechanical properties. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Kinetics of UV‐initiated RAFT crosslinking polymerization of dimethacrylates

The UV‐initiated RAFT polymerizations of a series of poly(ethylene glycol) dimethacrylates (PEGDMA) were investigated using differential scanning photocalorimetry (DPC) at room temperature. The rate of the RAFT system was much lower than that of a conventional free radical polymerization. A mild autoacceleration occurred as the addition reaction became diffusion controlled. The influence of the spacer length (CH₂CH₂O)_x between the vinyl moieties of the dimethacrylates on the polymerization kinetics was examined. The polymerization rate of PEGDMA decreased with an increased x value from 4 to 9, but it increased with a further increased x value from 9 to 14. Mechanical properties of the resulting polymers were also examined by dynamic mechanical analysis (DMA). It was concluded that the presence of the RAFT agent during polymerization of multifunctional monomers did not have an effect on the heterogeneity of the polymer network. In comparison with three different PEGDMAs, the PEGDMA with the longest spacer formed the most homogeneous networks with a lower crosslinking density. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Investigation on morphology and mechanical properties of polyamide 6/maleated ethylene‐propylene‐diene rubber/organoclay composites

Maleated ethylene‐propylene‐diene rubber (EPDM‐g‐MA) toughened polyamide 6 (PA6)/organoclay (OMMT) nanocomposites were prepared by melt blending. The role of OMMT in the morphology of the ternary composites and the relationship between the morphology and mechanical properties were investigated by varying the blending sequence. The PA6/EPDM‐g‐MA/OMMT (80/20/4) composites prepared by four different blending sequences presented distinct morphology and mechanical properties. The addition of OMMT could obviously decrease viscosity of the matrix and weaken the interfacial interactions between PA6 and EPDM‐g‐MA when blending EPDM‐g‐MA with a premixed PA6/OMMT nacocomposite, resulting in the increase of rubber particle size. The final mechanical properties are not only determined by the location of OMMT, but also by the interfacial adhesion between PA6 and EPDM‐g‐MA. Having maximum percentage of OMMT platelets in the PA6 matrix and keeping good interfacial adhesion between PA6 and EPDM‐g‐MA are beneficial to impact strength. POLYM. ENG. SCI., 2009. © 2008 Society of Plastics Engineers     

Effects of surface modification of carbon nanofibers on the mechanical properties of polyamide 1212 composites

In this study, the effects of carbon nanofiber (CNF) surface modification on mechanical properties of polyamide 1212 (PA1212)/CNFs composites were investigated. CNFs grafted with ethylenediamine (CNF‐g‐EDA), and CNFs grafted with polyethyleneimine (CNF‐g‐PEI) were prepared and characterized. The mechanical properties of the PA1212/CNFs composites were reinforced efficiently with addition of 0.3 wt % modified CNFs after drawing. The reinforcing effect of the drawn composites was investigated in terms of interfacial interaction, crystal orientation, crystallization properties and so on. After the surface modification of CNFs, the interfacial adhesion and dispersion of CNFs in PA1212 matrix were improved, especially for CNF‐g‐PEI. The improved interfacial adhesion and dispersion of CNFs in PA1212 matrix was beneficial to reinforcement of the composites. Compared with pure PA1212, improved degree of crystal orientation in the PA1212/CNF‐g‐PEI (CNF‐g‐EDA) composites was responsible for reinforcement of mechanical properties after drawing. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41424.