High-density polyethylene membranes embedded with carboxylated and polyethylene glycol-grafted nanodiamond to be used in membrane bioreactors

In this work, neat and modified nanodiamond (ND) particles were embedded into high-density polyethylene (HDPE) membranes to improve hydrophilicity and antifouling properties. The membranes were prepared via thermally induced phase separation (TIPS) method and used for pharmaceutical wastewater treatment in membrane bioreactors (MBR) system. To prevent the agglomeration of ND, it was modified using two methods: thermal carboxylation (ND-COOH) and grafting with polyethylene glycol (ND-PEG). Membranes with different concentration of ND-COOH and ND-PEG nanoparticles ranging from 0.00 to 1.00 wt % were prepared and characterized using a set of analyses including water contact angle, pure water flux, tensile strength, differential scanning calorimeter, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy. It was found that the optimum contents of ND-COOH and ND-PEG nanoparticles were 0.50 wt % and 0.75 wt %, respectively. The interfacial interaction between nanoparticles and HDPE matrix was studied based on Pukanzsky model. To examine the performance of membranes, critical flux, filtration experiment in the MBR, and fouling analysis of membranes were carried out. The results showed that among the fabricated membranes, 0.75 wt % HDPE/ND-PEG membrane had the highest water flux and the best antifouling properties. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47914.     

Influence of deposited amine-functionalized Si-MCM-41 in polyacrylonitrile electrospun membranes applied for separation of water in oil emulsions

Among several oil/water emulsion separation technologies, the utilization of nanoparticle-decorated membranes with diverse functionalities has received considerable attention in recent years, particularly if the antifouling capacity can be improved. In this article, we propose a new membrane based on surface-hydrolyzed polyacrylonitrile electrospun membranes and/or decorated with amine-functionalized Si-MCM-41 nanoparticles to be used as oil/water emulsion separation treatment and to determine their antifouling ability. X-Ray photoelectron spectrometry, attenuated total reflectance Fourier transform infrared spectroscopy, and toluidine blue O assay, scanning electron microscopy, contact angle measurements for oil under water and thermogravimetry were used for characterizing the membranes and an assay of permeability was developed to quantify the diffusion of oil molecules across the electrospun membrane. The electrospun and/or decorated membranes showed an underwater oleophobic wettability, which can separate oil-in-water emulsions with 87% separation efficiency, results of fouling experiments, evaluated in terms of rejection and flux recovery ratio, exhibited good antifouling ability, but the membrane decoration process did not lead to superior outcomes compared with undecorated membranes.     

Nano SiO2 and TiO2 embedded polyacrylonitrile/polyvinylidene fluoride ultrafiltration membranes: Improvement in flux and antifouling properties

Polyvinylidene fluoride (PVDF) and polyacrylonitrile (PAN) ultrafiltration (UF) membranes are widely used in drinking water and wastewater applications. These membranes are prone to fouling and membrane efficiency decreases with time under constant operation. Significant improvements/modifications are necessary to apply these polymers as sustainable membrane materials. In this study, PVDF and PAN UF membranes were modified through incorporation of nanoparticles (NPs) namely SiO₂ and TiO₂. PVDF and PAN UF membranes were prepared by phase inversion method from polymer solutions having dispersed SiO₂ and TiO₂ NPs in it. Membrane surface hydrophilicity, charge, roughness, and morphology were studied. Equilibrium water content and molecular weight cut-off of the membranes were also measured. Addition of NPs increased membrane surface hydrophilicity, equilibrium water content, and surface potential. NPs modified membranes exhibited better membrane flux (35–79% higher) and antifouling properties (flux recovery ratio values 28–41% higher) than the virgin membranes.     

A high flux graphene oxide nanoparticles embedded in PAN nanofiber microfiltration membrane for water treatment applications with improved anti-fouling performance

A high flux and anti-fouling graphene oxide (GO) nanoparticles embedded in polyacrylonitrile (PAN) nanofiber microfiltration membranes (PANGMs) were fabricated through the facile electrospinning method and were characterized by water treatment applications. The synthesized GO nanoparticles and GO nanoparticles embedded in PAN nanofiber membranes were characterized by FESEM, FTIR, and EDS. SEM images showed that the PANGMs possessed randomly overlaid fibers with a network-like highly porous structure similar to the pristine PAN nanofiber membrane, while agglomeration of GO nanoparticles was observed at high GO concentration. The introduction of GO nanoparticles into the PAN polymeric matrix significantly increased the permeation flux of the resulting membrane in both dead-end and cross-flow filtration systems. A high flux recovery ratio of 96.6% and a low irreversible fouling ratio of 3.4% were obtained at 2% (wt.) GO nanoparticles. More importantly, a high flux recovery ratio of GO nanoparticles embedded in PAN nanofiber membrane was retained after 20 repeated cycles of activated sludge suspension filtration. Therefore, it can speculate that the incorporation of GO nanoparticles into the PAN nanofibers could efficiently improve the anti-fouling ability of membranes which had opened up an alternative for the preparation of high flux and anti-fouling microfiltration membranes in practical water treatment applications such as membrane bioreactors.

     

Structural manipulation of PES constituents to prepare advanced alternative polymer for ultrafiltration membrane

Polyethersulfone (PES) is the most well-known polymer for the preparation of ultrafiltration (UF) membrane, but its membrane suffers from fouling. In this study, two engineered polymers were synthesized to provide optimal antifouling properties for UF membranes that simultaneously benefit from good properties of polyamide and PES. The choice of polyamide is due to its prominent characteristics and the convenience of its synthesis with various functional groups in a cost-effective way. Two hydroxyl containing polyamide bearing sulfone groups (PAS) and ether group (PAE) were synthesized by polycondensation method. The UF membranes were fabricated using the phase inversion method via immersion precipitation of PAS, PAE, and PES in dimethylacetamide, as a solvent and water, as a nonsolvent. The obtained membranes were compared and characterized by means of atomic force microscopy, scanning electron microscopy, contact angle, and Fourier transform infrared spectroscopy in the attenuated total reflection mode. The performance of membranes illustrated that the PAS and PAE membranes in comparison with the PES membrane had better porosity, water permeability, lesser protein fouling, more vertically finger-like pores, and more hydrophilic surface. The water permeability of PES, PAE, and PAS was 7.3, 64.0, and 78.0 L m⁻² h⁻¹ while their flux recovery ratio was 59.4, 83.3, and 86.7%, respectively. The promising permeability and antifouling properties of the PAS are potentially applicable in the efficient industrial separation and wastewater treatment. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 137, 48690.     

PAN ultrafiltration membranes grafted with natural amino acids for improving antifouling property

In this report, antifouling polyacrylonitrile (PAN) ultrafiltration membranes were prepared from blends of PAN/polyglycidyl methacrylate (PGMA) via phase inversion method followed by the grafting of natural amino acids through epoxy ring-opening reaction. The grafted PAN membranes possessed highly stable hydrophilic surfaces as a result of the grafting of amino acids, which was adequately demonstrated in attenuated total reflectance–Fourier transform infrared spectroscopy (ATR/FTIR), X-ray photoelectron spectroscopy (XPS), and contact angle measurements. The results of tensile strength and scanning electron microscopy (SEM) images further proved that the surface modification had little effect on their mechanical properties, surface, and cross-sectional morphologies. Meanwhile, remarkable resistance against bovine serum albumin (BSA) and lysozyme (Lyz) fouling was observed for the neutral amino acid-based PAN membranes due to the formation of zwitterionic hydration layer on the membrane surface, while PAN membranes grafted with charged amino acids were able to prohibit the approach of like charged proteins with reduced deposition and provide the driving force for oppositely charged protein adsorption. Furthermore, the ultrafiltration and antifouling performance of PAN membranes were investigated by BSA filtration experiments. Compared with the pristine PAN membrane, all the modified PAN membranes exhibited higher pure water flux, better flux recovery ratio, lower rejection, less total permeation resistance, and preferable stability, having potential applications in protein separation and purification.     

Green and feasible fabrication of loose nanofiltration membrane with high efficiency for fractionation of dye/NaCl mixture by taking advantage of membrane fouling

Loose nanofiltration membrane emerges as required recently, since it is hard for conventional nanofiltration membrane to fractionate mixture of dyes and salts in textile wastewater treatment. However, the polymeric membranes unavoidably suffer from membrane fouling, which was caused by the adsorption of organic pollutants (like dyes). Normally, the dye fouling layer will shrink membrane pore size, thus resulting in flux decline and rejection increase. It is thought that membrane fouling may be a double-edged sword and can be an advantage if properly utilized. Thereby, loose nanofiltration membranes were constructed here by a green yet effective method to fractionate dyes/salt mixture by taking advantage of membrane fouling without using poisonous ingredients. A commercially available polyacrylonitrile (PAN) ultrafiltration membrane with high permeability was chosen as the substrate, and dyes were used to contaminate PAN substrate and formed a stable barrier layer when adsorption of dyes reached dynamic equilibrium. The resultant PAN-direct red 80 (DR80) composite membranes displayed superior permeability (~128.4 L m⁻² h⁻¹) and high rejection (~99.9%) to DR80 solutions at 0.4 MPa. Moreover, PAN-DR80 membranes allowed fast fractionation of dyes/sodium chloride (NaCl) mixture, which maintained a negligible dye loss and a low NaCl rejection (~12.4%) with high flux of 113.6 L m⁻² h⁻¹ at 0.4 MPa. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47438.     

溶剂对水处理用PVDF微孔膜结构性能影响

利用N,N-二甲基甲酰胺(DMF)、N,N-二甲基乙酰胺(DMAc)、磷酸三乙酯(TEP)和二甲基亚砜(DMSO)4种溶剂制备PVDF微孔膜,考察溶剂对成膜性能的影响,除了测试膜结构、孔隙率、清水通量等常规指标外,增加膜污染速率指标,研究4种溶剂成膜在实际膜-生物反应器(MBR)内的运行情况,得到4种溶剂成膜结构不同,具有贯穿性指状孔的DMSO溶剂成膜具有最高的孔隙率,高清水通量,并在MBR内表现出最低的污染速率,最适于制备水处理用的PVDF膜;具有海绵状孔的TEP溶剂成膜具有最高的清水通量,高的孔隙率,在MBR内污染速率较低;DMF、DMAc溶剂成膜结构类似,具有不贯穿的指状孔,孔隙率及清水通量均较低,膜污染速率高,不适于水处理MBR用膜。     

Synergistic effect of silica nanoparticles in the matrix of a poly(ethylene glycol) diacrylate coating layer for the surface modification of polyamide nanofiltration membranes

In this study, a commercial polyamide nanofiltration membrane was modified by a combination of poly(ethylene glycol) diacrylate (PEGDA) in situ polymerization and silica (SiO₂) nanoparticles. The PEGDA layer was polymerized on the surface of the membranes alone or mixed with SiO₂ nanoparticle. The surface modification influence on the water flux, salt rejection, and antifouling behavior was investigated. The effects of the nanoparticles and PEGDAylation on the membrane properties were characterized by Fourier transform infrared spectroscopy, contact angle measurement, and scanning electron microscopy analyses. The membranes that were in contact with 30 wt % PEGDA and then treated with ultraviolet light for 5 min had a better water flux than the unmodified membrane. The fouling resistance of the membranes to a foulant solution containing bovine serum albumin, humic acid, and sodium sulfate were studied, and the results show that the membrane with 30 wt % PEGDA had better antifouling properties. After the weight percentage of PEGDA for the prepolymerization solution was optimized (30 wt % was the best), the SiO₂ nanoparticle concentration in the prepolymerization matrix was optimized. The presence of SiO₂ nanoparticles in the PEGDA layer increased the membrane flux. The maximum water flux and good antifouling properties were obtained for 0.5 wt % SiO₂ nanoparticles in a 30 wt % PEGDA layer. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43793.     

抗污染芳香聚酰胺反渗透膜研究进展

聚酰胺反渗透膜具有选择透过性高、化学稳定性好等优点,在水处理领域应用广泛。但膜污染导致的通量下降、寿命降低等问题严重制约了其发展与应用,开发抗污染反渗透膜是缓解膜污染的重要手段。本文根据抗污染膜作用机理将抗污染反渗透膜分为抗黏附型、污染驱除型和杀菌型,综述了近年来相关方面的研究成果,并对合理组合多种机制制备抗污染反渗透膜的进展进行简要概括,最后对抗污染反渗透膜的发展前景进行了展望。     

Amphiphilic poly(acrylonitrile‐co‐acrylic acid)/silver nanocomposite additives for the preparation of antibiofouling membranes with improved properties

This work focuses the preparation of polymer‐silver nanocomposite (Ag‐Nc) dense free standing films and nonwoven fabric supported porous ultrafiltration membranes with improved membrane performance and long‐term antibiofouling properties. New polyacrylonitrle‐based Ag‐Ncs, poly(acrylonitrle‐co‐acrylic acid)‐silver (PAN‐co‐PAA‐Ag) containing 35 wt% of PAA and 0.35–0.65 wt% of Ag‐nanoparticles (Nps) were synthesized and used as additives for the fabrication of PAN‐based (PAN/PAN‐co‐PAA‐Ag) Ag‐Nc porous membranes and dense‐free standing films. The Ag‐Nps were homogeneously dispersed into the PAN‐co‐PAA random copolymer matrix. The prepared membranes (PAN/PAN‐co‐PAA‐Ag) showed combination of properties such as excellent antimicrobial activity towards both Gram Negative and Gram Positive bacteria (prevent biofilm formation), improved protein antifouling properties, and enhanced water flux when compared to neat PAN‐based membrane. The antimicrobial properties, hydrophilicity, and the water flux of various membranes follow the following order for the membranes PAN < PAN/PAN‐co‐PAA < PAN/PAN‐co‐PAA‐Ag. Extraneous addition of small amount of polyethylene glycol (PEG) during preparation of additive i.e. [PEG + PAN‐co‐PAA]‐Ag further improved the protein antifouling properties of the PAN‐based membranes (PAN/[PEG+PAN‐co‐PAA‐Ag]). The dispersed Ag‐Nps were stable on the surface of phase inverted membranes for long period of time and PAN/PAN‐co‐PAA‐Ag membranes are therefore suitable for long‐term water treatment under bacterial environment. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Structure and Performance of Poly(vinylidene chloride‐co‐vinyl chloride) Porous Membranes with Different Additives

Poly(vinylidene chloride‐co‐vinyl chloride) (P(VDC‐co‐VC) membranes were prepared by non‐solvent‐induced phase separation and adjusted by adding water‐soluble polyethylene glycol (PEG) and water‐insoluble silicon dioxide (SiO₂) hydrophilic nanoparticles. The structure of pores and antifouling performance were investigated to illustrate the effect of these nanoparticles. The cross section of the P(VDC‐co‐VC) membrane exhibited more macropores and the typical finger‐like pores turned into more vertically interconnected ones with increasing PEG content, while the number and size of finger‐like pores became less with increasing SiO₂ content. Considering the filtration and antifouling experiments, the presence of hydrophilic PEG and SiO2 nanoparticles in the P(VDC‐co‐VC) polymer matrix improved the membrane performance in terms of high flux, high BSA rejection ratio, and fouling resistance.     

Fabrication of polysulfone nanocomposite membranes with silver‐doped carbon nanotubes and their antifouling performance

In this study, polysulfone (PSf)/silver‐doped carbon nanotube (Ag‐CNT) nanocomposite membranes were prepared by a phase‐inversion technique; they were characterized and evaluated for fouling‐resistant applications with bovine serum albumin (BSA) solutions. Carbon nanotubes were doped with silver nanoparticles via a wet‐impregnation technique. The prepared Ag‐CNT nanotubes were characterized with scanning electron microscopy (SEM)/energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, Raman spectroscopy, and thermogravimetric analysis. The fabricated flat‐sheet PSf/Ag‐CNT nanocomposite membranes with different Ag‐CNT loadings were examined for their surface morphology, roughness, hydrophilicity, and mechanical strength with SEM, atomic force microscopy, contact angle measurement, and tensile testing, respectively. The prepared composite membranes displayed a greater rejection of BSA solution (≥90%) and water flux stability during membrane compaction with a 10% reduction in water flux values (up to 0.4% Ag‐CNTs) than the pristine PSf membrane. The PSf nanocomposite membrane with a 0.2% Ag‐CNT loading possessed the highest flux recovery of about 80% and the lowest total membrane resistance of 56% with a reduced irreversible fouling resistance of 21%. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44688.     

Fabrication and characterization of silver nanoparticle-incorporated bilayer electrospun–melt-blown micro/nanofibrous membrane

In this study, we fabricated an antifouling bilayered fibrous filter media having micro-nonwoven by melt blowing and nano-nonwoven by electrospinning process. Silver nanoparticle-incorporated polyurethane nanofibers were electrospun on the meltblown fiber of polypropylene. Silver nanoparticles were synthesized in situ in the polyurethane electrospun nanofibers through reduction of silver nitrate. The filter media were characterized by field emission scanning electron microscope, transmission electron microscopy, and X-ray diffraction and energy-dispersive X-ray spectroscopy analyses. The composite membrane showed that a thin layer of electrospun nanofibers improved the filtration efficiency without substantial increase in pressure drop. In situ synthesis of Ag NPs imparted the antibacterial and antifouling characteristics to the membrane.     

基于小孔径PVDF内衬膜A/O-MBR膜污染分析

为研究膜生物反应器膜污染问题,在缺氧-好氧一体式膜生物反应器中,对模拟生活污水的处理效果进行考察,考察了4种不同孔径聚偏氟乙烯(PVDF)内衬膜对膜污染的影响规律。结果表明,基于小孔径PVDF膜的MBR工艺对模拟生活污水中COD、NH3-N的去除率分别达到96%、90%,出水浊度在0.35 NTU以下;在操作条件固定的情况下,随着膜孔径增加,临界通量逐渐降低;孔径越小,跨膜压差上升越缓慢,膜污染较轻。膜污染模型分析结果显示:无论何种孔径的膜,在MBR系统中,滤饼层和凝胶层污染所占的比例都最大(>80%),因此,在使用过程中减缓滤饼层及凝胶层的形成至关重要。     

Studies on the surface properties of mixed‐matrix membrane and its antifouling properties for humic acid removal

A major factor limiting the use of ultrafiltration (UF) membrane in water treatment process is the membrane fouling by natural organic matter such as humic acid (HA). In this work, neat PVDF and PVDF/TiO₂ mixed‐matrix membranes were prepared and compared in terms of their antifouling properties. Two commercial types of TiO₂ namely PC‐20 and P25 were embedded to prepare the mixed matrix membranes via in situ colloidal precipitation method. The contact angles for the mixed‐matrix membranes were slightly reduced while the zeta potential was increased (more negatively charged) compared with the neat membrane. Filtration of HA with the presence of Ca²⁺ demonstrated that mixed‐matrix membrane could significantly mitigate the fouling tendency compared with the neat membrane with flux ratio (J/J₀) of 0.65, 0.70, and 0.82 for neat PVDF membrane, PVDF/TiO₂ mixed‐matrix membrane embedded with P25 and PC‐20, respectively. PC‐20 with higher anatase polymorphs exhibited better antifouling properties due to its hydrophilicity nature. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Fouling evaluation of polyethersulfone (PES)/sulfonated cation exchange resin (SCER) membrane for BSA separation

In this study, antifouling membranes were prepared through dry wet‐phase inversion method. The incorporation of electrostatistically charged group of sulfonate cation exchange resins (SCER) into polyethersulfone membrane matrix attempts to give a synergistic combination of properties for bovine serum albumin (BSA) removal. The effect of different composition of SCER into the blend membranes were characterized using scanning electron microscopy, atomic force microscopy, porosimeter, attenuated total reflectance Fourier transform infrared spectroscopy, and goniometer. All the prepared membranes were evaluated for BSA separation. The membrane resistance of all membranes decreases with increase in SCER loading. Among all membranes, P3 membrane shows a better fouling, reversible and irreversible resistance for BSA, signifying that the attached BSA on the membrane surface can be easily removed by physical cleaning. The improvement in hydrophilicity of P3 membrane was found to be the dominant factor in mitigating BSA fouling. The results demonstrated that BSA fouling could be alleviated by varying SCER concentration in the polyethersulfone matrix. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45854.     

Preparation and characterization of layered membranes constructed by sequential redox‐initiated grafting onto polyacrylonitrile ultrafiltration membranes

Layered membranes were prepared by sequential grafting—by means of redox initiators—of water‐soluble monomers, with oppositely charged ionic groups, onto ultrafiltration (UF) polyacrylonitrile (PAN) membranes at room temperature. Grafting of a single layer of 2‐hydroxyethylmethacrylate (HEMA) onto a PAN membrane gave a highly grafted membrane with a relatively high water flux. Bilayered membranes with various properties containing poly‐2‐(dimethylamino)ethyl methacrylate (p‐2DMAEMA) as the bottom layer and polymethacrylic acid or polystyrenesulfonic acid (p‐SSA) as the upper layer were prepared and compared—by means of infrared spectroscopy and electron microscopy—with single‐layered membranes of grafted polyhydroxyethylmethacrylate. Layered membranes exhibited a significant decline in water flux in comparison with the initial UF membranes. The flux could, however, be manipulated by controlling the concentration of monomers, the time of grafting, and the number of layers. When four layers of p‐2DMAEMA and p‐SSA were sequentially grafted onto a PAN membrane, pure water fluxes were stable over a wide range of pH values and did not change over long storage times. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 509–520, 2005     

Peroxopolyoxometalate nanoparticles blended PES membrane with improved hydrophilicity,anti-fouling,permeability, and dye separation properties

Poly(ethersulfone) (PES) is one of the polymers most widely used for the fabrication of ultrafiltration or nanofiltration membranes in various applications, but its membrane suffers from fouling. In this study, preparation, characterization, and performance of PES nanocomposite membrane comprising peroxopolyoxometalate nanoparticles was studied to provide improved permeability and anti-fouling properties. The high oxygen ratio of the PW₄ nanoparticles could enhance the hydrophilicity of the membranes. The PW₄ nanoparticles were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), energy dispersive X-ray (EDX), and X-ray diffraction analyses. The mixed matrix membranes were fabricated using a non-solvent induced phase-separation method. The fabricated membranes were characterized using atomic force microscopy, attenuated total reflection, SEM, EDX mapping, total average porosity, thermogravimetric analyze, and water contact angle experiments. The dye flux and rejection, pure water permeability and anti-fouling properties of the membranes were investigated. All of the membranes blended by different contents of the PW₄ nanoparticles presented better performance compared to the unmodified membrane. The filtration performance of the membranes in reactive green 19 (RG19) and reactive yellow 160 (RY160) dye separation showed that all of the PW₄ blended membranes possessed dye rejection greater than 86% and 96% for RY160 and RG19, respectively. The reusability test using bovine serum albumin (BSA) protein and RG19 dye solutions in five cycle experiments presented good reproductivity of the PW₄ blended membranes. The PES membrane containing 1 wt% of PW₄ nanoparticles showed the highest flux recovery ratio (75%) as well as reduced irreversible fouling ratio (8%) through BSA protein filtration.     

Studies on the synthesis of electrospun PAN‐Ag composite nanofibers for antibacterial application

We have successfully synthesized polyacrylonitrile (PAN) nanofibers impregnated with Ag nanoparticles by electrospinning method at room temperature. Briefly, the PAN‐Ag composite nanofibers were prepared by electrospinning PAN (10% w/v) in dimethyl formamide (DMF) solvent containing silver nitrate (AgNO₃) in the amounts of 8% by weight of PAN. The silver ions were reduced into silver particles in three different methods i.e., by refluxing the solution before electrospinning, treating with sodium borohydride (NaBH₄), as reducing agent, and heating the prepared composite nanofibers at 160°C. The prepared PAN nanofibers functionalized with Ag nanoparticles were characterized by field emission scanning electron microscopy (FESEM), SEM elemental detection X‐ray analysis (SEM‐EDAX), transmission electron microscopy (TEM), and ultraviolet‐visible spectroscopy (UV‐VIS) analytical techniques. UV‐VIS spectra analysis showed distinct absorption band at 410 nm, suggesting the formation of Ag nanoparticles. TEM micrographs confirmed homogeneous dispersion of Ag nanoparticles on the surface of PAN nanofibers, and particle diameter was found to be 5–15 nm. It was found that all the three electrospun PAN‐Ag composite nanofibers showed strong antibacterial activity toward both gram positive and gram negative bacteria. However, the antibacterial activity of PAN‐Ag composite nanofibers membrane prepared by refluxed method was most prominent against S. aureus bacteria. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012