Preparation and characterization of conductive and magnetic PPy/Fe3O4/Ag nanocomposites

In this article, conductive and magnetic nanocomposites composed of polypyrrole (PPy), magnetite (Fe₃O₄) nanoparticles (NPs), silver (Ag) NPs, have been successfully synthesized with a two step process. First, the PPy/Fe₃O₄ was prepared by the ultrasonic in situ polymerization. Next, the PPy/Fe₃O₄/Ag was synthesized through the electrostatic adsorption. The products were characterized by fourier‐transform infrared (FTIR) spectroscopy, Scanning electron microscopy (SEM), Thermogravimetric (TG), conductivity and magnetization analysis, and the results showed that the Ag NPs with the good conductivity coated uniformly on the surface of PPy/Fe₃O₄ and improved the conductivity of PPy/Fe₃O₄/Ag composites. In addition, as compared with PPy/Fe₃O₄, PPy/Fe₃O₄/Ag composites also have the excellent electro‐magnetic property and enhanced thermostability. POLYM. COMPOS., 35:450–455, 2014. © 2013 Society of Plastics Engineers     

Electroconductive performance of polypyrrole/graphene nanocomposites synthesized through in situ emulsion polymerization

The present study demonstrates a modified in situ emulsion polymerization (EP) approach convenient for the formation of polypyrrole/graphene (PPy/GN) nanocomposites with harnessed conductivities. A series of PPy/GN nanocomposites were prepared by loading different weight percent (wt %) of GN during in situ EP of pyrrole monomer. The polymerization was carried out in the presence of dodecyl benzene sulfonic acid, which acts as an emulsifier and protonating agent. The microstructures of the nanocomposites were studied by scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, Fourier transform infrared, X‐ray photoelectron spectroscopy, UV–vis spectroscopy, Raman spectroscopy, photoluminescence spectroscopy and thermogravimetric analyses. The electrical conductivities of the nanocomposite pellets pressed at different applied pressures were determined using four probe analyzer. The electrical conductivities of the nanocomposites were considerably enhanced as compared to those of the individual PPy samples pressed at the same pressures. An enhanced conductivity of 717.06 S m^?1 was observed in the sample with 5 wt % GN loading and applied pressure of 8 tons. The results of the present study signify that the addition of GN in the PPy polymer harnesses both electrical and thermal properties of the polymer. Thus, PPy/GN nanocomposites with superior properties for various semiconductor applications can be obtained through direct loading of GN during the polymerization process. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41800.     

Structural,electrical, thermal,and gas sensing properties of new conductive blend nanocomposites based on polypyrrole/phenothiazine/silver‐doped zinc oxide

The main aim of this study is to investigate the effect of silver‐doped zinc oxide (Ag‐ZnO) loading on the structural, morphological, thermal and electrical properties, and gas sensing behavior of polypyrrole (PPy)/phenothiazine (PTZ)‐blend nanocomposites. The composites are characterized by FTIR, XRD, SEM, TEM, DSC, TGA, and impedance studies. FTIR spectra exhibit the presence of Ag‐ZnO in the PPy/PTZ blend. XRD analysis shows that the semicrystalline behavior of the polymer blend is greatly enhanced by the addition of Ag‐doped ZnO particles. Uniform dispersion of nanoparticles in the polymer is obtained from SEM analysis. The TEM images confirm the presence of spherically shaped nanoparticles in PPy/PTZ blend with a size of 10–25 nm. The DSC measurement indicates that the glass transition temperature of PPy/PTZ blend was significantly improved in the presence of Ag‐doped ZnO nanoparticles. The thermal decomposition temperature of nanocomposite obtained from TGA shows an increase with increase in the content of Ag‐ZnO particles. The incorporation of Ag‐doped ZnO nanoparticles to PPy/PTZ blend exhibit increase in the AC conductivity and dielectric properties of the nanocomposite, due to the pilling of charges at the extended interface of the composite system. The DC conductivity of the nanocomposite increases with the loading of nanoparticles. The ammonia gas sensing performance of PPy/PTZ/Ag‐ZnO nanocomposite is analyzed, and the result shows that the fabricated blend composite can be used as a promising candidate for the easy access of gas molecules. J. VINYL ADDIT. TECHNOL., 26:187–195, 2020. © 2019 The Authors. Journal of Vinyl and Additive Technology published by Wiley Periodicals, Inc. on behalf of Society of Plastics Engineers.     

Preparation and characterization of polypyrrole/modified multiwalled carbon nanotube nanocomposites polymerized in situ in the presence of barium titanate

Polypyrrole (PPy) composites were prepared with both unmodified and amine‐modified multiwalled carbon nanotubes (MWCNTs) in the presence and absence of barium titanate (BaTiO₃) by in situ oxidative polymerization. A uniform coating of PPy on the MWCNTs and BaTiO₃ surfaces was confirmed by field emission scanning electron microscopy and high‐resolution transmission electron microscopy images. The structure of the pure and amine‐modified MWCNTs were identified by Fourier transform infrared spectroscopy. The incorporation of BaTiO₃ enhanced the thermal stability and capacitance properties of the composites. The maximum specific capacitance and energy density values found for the PPy/amine‐modified MWCNT/BaTiO₃ composites were 155.5 F/g and 21.6 W h/kg, respectively, at a scan rate of 10 mV/s. The maximum power density was found to be 385.7 W/kg for the same composite at a scan rate of 200 mV/s. Furthermore, the impedance spectra of the composites showed moderate capacitive behavior. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and characterization of polypyrrole/selenium composites

This article reports synthesis of polypyrrole (PPy) and its composites having various amounts of selenium (Se) in the presence of nitric acid in aqueous medium via chemical oxidative polymerization. Samples were spectroscopically characterized using Fourier transform infrared spectroscopy, ultraviolet‐visible spectroscopy, and atomic absorption spectroscopy. Although morphology of the samples was examined by using scanning electron microscopy (SEM), their thermal properties were studied via differential scanning calorimetry (DSC). The alternating current (ac) conductivity and dielectric properties were investigated as a function of temperature. Variation of adsorption free energy obtained from Langmuir adsorption isotherm showed that metal cations were physically adsorbed onto the polymer surface. SEM images showed that filling process significantly changes the morphology of PPy. DSC results indicated that cold crystallization temperature (T_cc) of unfilled PPy decreases with increasing filling level. Dielectric measurements showed that relaxation times for PPy and its composites have decreased linearly with increasing temperature. The conductivity of the PPy, when filled with 1 g of Se, increased ～ four times at room temperature for 1 kHz. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

One‐step synthesis of highly conductive PPy/graphite nanosheets/Gd3+ composites

Highly conductive polypyrrole/graphite nanosheets/Gd³⁺ (PPy/nanoG/Gd³⁺) composites are fabricated via in situ polymerization using p‐toluenesulfonic acid as a dopant and FeCl₃ as an oxidant. The effects of the graphite nanosheets and Gd³⁺ loading on the electrical conductivity are investigated. The maximum conductivity of PPy/nanoG/Gd³⁺ composites about 17.86 S/cm found with 3 wt% graphite nanosheets and 6 wt% Gd³⁺ at room temperature. The results showed that the high‐aspect‐ratio structure of graphite nanosheets played an important role in forming a conducting network in PPy matrix. Thermal gravimetric analysis demonstrates an improved thermal stability of PPy in the PPy/nanoG/Gd³⁺ composites. The microstructures of PPy/nanoG/Gd³⁺ are evidenced by the SEM and TEM examinations. POLYM. COMPOS., © 2011 Society of Plastics Engineers.     

Preparation and enhanced electrochemical properties of Ag/polypyrrole composites electrode materials

Ag/polypyrrole (PPy) composites were synthesized with different dispersants via interface polymerization method. The morphology of the composites was investigated by scanning electron microscopy and transmission electron microscopy, and the results showed that the dispersant had strong effect on the morphology of the obtained composites. The structure of the products was characterized by Fourier transform infrared spectroscopy, and X‐ray diffraction. The specific capacitance and impedence of Ag/PPy composites electrode was evaluated through charge/discharge measurements and electrochemical impedance spectroscopy, respectively. Electrochemical performances indicated that Ag/PPy composite electrode used polyvinyl alcohol as dispersant exhibited the highest specific capacitance of 635.5 F/g at a current density of 2.45 mA/g, which provided potential application as supercapacitor materials. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

The characterization of polyaniline and polypyrrole composites by pyrolysis mass spectrometry

In this work, direct insertion probe pyrolysis mass spectrometry technique was applied to investigate the thermal and structural characteristics of electrochemically prepared polyaniline (PANI), polypyrrole (PPy), and their composites/copolymers synthesized either by electrochemical polymerization of pyrrole on PANI‐coated electrode (PANI/PPy) or by coating PANI on PPy (PPy/PANI) in H₂SO₄ solutions. It has been determined that the polymer first coated on the electrode degraded to a certain extent during the polymerization of the second. The extent of degradation was greater for PPy and increased with the increase in acid concentration. On the other hand, the detection of mixed dimers confirmed copolymer formation. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of secondary doped polypyrrole/organic modified attapulgite conductive composites

Secondary doping method was introduced into fabricating polypyrrole/oganic modified attapulgite conductive composites. The preparation conditions, such as amount of hexadecylpyridinium chloride (CPC, modifying agent), organic modified attapulgite (OATP), and HCl (secondary dopant) have been optimized to get the composites with the highest conductivity. When m_CPC/m_ATP, m_OATP/m_Py, and n_HCl/n_SA (SA is sulfamic acid) reaches 0.03, 0.6, and 0.5, respectively, the PPy/OATP composites possess the highest conductivity of 87.59 S cm^?1 as well as the highest thermal degradation temperature of 249.29°C. Scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, Fourier transform infrared spectroscopy, UV‐Visible diffuse reflectance study, and X‐ray photoelectron Spectroscopy results showed that PPy chains form the core‐shell structure and may combine with OATP via π–π stacking interaction. Thermogravimetric analysis showed that the thermal stability of PPy/OATP‐SH composites was enhanced and these could be attributed to the retardation effect of OATP as barriers for the degradation of PPy. This method may open a new door for PPy‐based composites with special structures, higher performance, and thus broader application ranges. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41407.     

Electrolytic admicellar polymerization of pyrrole on natural rubber/clay nanocomposites

Organic–inorganic composites consisting of natural rubber (NR), polypyrrole (PPy), and sodium montmorillonite (Na‐MMT) were synthesized via electrolytic admicellar polymerization. A constant potential of 9 volts was chosen for the synthesis. The PPy concentration was fixed at 100 mM, and the clay contents were varied from 1 to 7 parts per hundred of rubber (phr). The synthesized nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), scanning electron microscopy, and transmission electron microscopy (TEM), together with thermal stability (TGA), mechanical properties, and electrical conductivity (σ_dc) studies. The FTIR spectra indicated the characteristic peaks of both PPy and MMT clay and also evidenced a slight interaction between the PPy chain and the clay layers, verifying the success of electrolytic admicellar polymerization. XRD and TEM results pointed out the good dispersion of clay platelets in the polymer matrix, suggesting an exfoliated structure. The morphology of the nanocomposites was greatly dependent on the amount of MMT clay, especially at a 7 phr loading. The initial modulus and tensile strength of the nanocomposites containing the 7 phr loading were about four and two times higher, compared with unfilled NR/PPy, respectively. Thermal stability studies revealed a slight improvement in the decomposition temperature for the PPy component by the clay layers, whereas the opposite trend was found for the NR component. More interestingly, the electrical conductivity of the admicelled rubber increased significantly (～ 19–32 times) with increasing clay contents from 1 to 7 phr, in comparison with unfilled NR/PPy. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Fabrication and characterization of multilayer SiO2/polymethacrylic acid/polypyrrole composites and hollow polypyrrole microspheres

Methacrylic acid was polymerized on the 3‐(methacryloxy)propyl trimethoxysilane‐modified silica core. The carboxylic acid groups of polymethacrylic acid (PMAA) not only provide the “active‐sites” for growth of the pyrrole monomers but also act as doping acids for polypyrrole (PPy). By in situ polymerization route, SiO₂/PMAA/PPy multilayer composites and hollow PPy microspheres with controllable shell thickness were fabricated. The morphologies, sizes, and structures of the nanocomposites were investigated in detail by transmission electron microscopy, scanning electron microscopy, Fourier‐transform infrared spectra, X‐ray photoelectron spectroscopy, and thermogravimetric analysis. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Conducting polypyrrole‐coated banana fiber composites: Preparation and characterization

In this study, conducting banana fibers (BF) were obtained through in situ oxidative polymerization of pyrrole (Py) on the BF surface using ferric chloride hexahydratate (FeCl₃·6H₂O) as an oxidant. Suitable reaction conditions are outlined for the polymerization of Py: oxidant/monomer molar ratio, Py concentration and polymerization time of 2/1, 0.05 mol.L⁻¹ and 30 min, respectively. Under these conditions, high‐quality conducting fibers containing polyPy and BF (PPy‐BF) were obtained with an electrical resistivity as low as 0.54 Ω.cm. The PPy‐BF was blended with different concentrations of polyurethane (PU) by mixing the two components in a vacuum chamber and then applying compression molding. The electrical resistivity of composites with 25 wt% of PPy‐BF was around 1.8 × 10⁵ Ωcm, which is approximately 10⁸ times lower than that found for pure PU. Moreover, PU/PPy‐BF composites exhibited higher mechanical properties than pure PU and PU/PPy, indicating that these conducting fibers can also be used as reinforcement for polymer matrices. The properties of the PPy‐BF obtained by the method described herein open interesting possibilities for novel applications of electrically conducting fibers, from smart sensors to new conducting fillers that can be incorporated into several polymer matrixes to develop conducting polymer composites with good mechanical properties.POLYM. COMPOS., 2013. © 2013 Society of Plastics Engineers     

Interfacial synthesis of polypyrrole/graphene composites and investigation of their optical,electrical and electrochemical properties

We report the development of a novel route for the synthesis of polypyrrole/graphene (PPy/GR) composites by liquid ? liquid interfacial polymerization, where GR and the initiator were dispersed in the aqueous phase and the monomer was dissolved in the organic phase. The synthesized samples were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, ultraviolet–visible spectroscopy, Raman spectroscopy, X‐ray diffraction, thermogravimetric analysis, electrochemical and electrical conductivity measurements. Structural analysis reveals a uniform dispersion of GR sheets in the PPy matrix. The composites showed noticeable improvement in thermal stability and electrical conductivity (8.45 S cm^?1) and excellent electrochemical reversibility in comparison with pure PPy. A specific capacitance of 260 F g^?1 at a current density of 100 mA g^?1 was achieved for the composite during the charge–discharge process. © 2013 Society of Chemical Industry     

Synthesis and characterization of coaxial silver/silica/polypyrrole nanocables

Double‐shelled coaxial nanocables of silver nanocables with SiO₂ and polypyrrole (PPy; Ag/SiO₂/PPy) were synthesized by a simple method. The thickness of the outer PPy shell could be controlled by the amount of pyrrole monomer. The silver nanocables encapsulated in the interior of the hollow PPy nanotubes were obtained by the removal of the midlayer SiO₂. By the silver‐mirror reaction, flowerlike Ag nanostructures could be formed on the surface of the Ag/SiO₂/PPy multilayer nanocable. The application of the as‐prepared Ag/SiO₂/PPy–Ag composites in surface‐enhanced Raman scattering (SERS) was studied with Rhodamine B (Rh B) as a probe molecule. We found that the composites could be used as SERS substrates and that they exhibited excellent enhancement ability. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Charge transport mechanism in intercalated polypyrrole aluminum‐pillared montmorillonite clay nanocomposites

Nanocomposites based on intercalated conducting polypyrrole (PPy) into the galleries of inorganic aluminum‐pillared Montmorillonite (Al‐PMMT) clay with varying concentrations of Al‐PMMT were prepared by in situ chemical polymerization. The intercalation was confirmed by X‐ray diffraction pattern. Charge transport mechanism in these composites was investigated by temperature dependent direct current conductivity measurements. An increase in DC conductivity value on addition of (Al‐PMMT) clay in the composites at all temperatures and a transition from three‐dimensional (3D) Mott's variable range hopping (VRH) process in pristine PPy to one‐dimensional (1D) Mott's VRH process in the intercalated polymer composites has been observed. This transition in charge transport mechanism of PPy from 3D VRH to 1D VRH on intercalation has been interpreted in terms of straightening and linearization of polymer chains and decrease in inter‐chain interactions in the intercalated PPy. Enhancement in mechanical properties and increase in thermal stability of the nanocomposites was also observed with the increase in weight percentage of Al‐PMMT in PPy‐Al‐PMMT composites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Reduced percolation concentration in polypropylene/expanded graphite composites: Effect of viscosity and polypyrrole

With the goal to obtain material combining electrical and thermal conductivity at low filler loadings, composites based on polypropylenes (PP) and expanded graphite (EG) have been prepared. The effects of matrix viscosity and of coating the EG particles with polypyrrole (PPy, EG/PPy = 37.5/62.5 by weight) on the EG dispersibility and formation of percolation structures have been analyzed. When increasing the EG amount from 6 to 8 wt %, the electrical conductivity of PP/EG composites increased by 7–9 orders of magnitude, independent of matrix viscosity. When EG‐PPy is added, percolation was observed between 8 and 12 wt % EG‐PPy (3 and 4.5 wt % EG) in case of PP with higher viscosity and 6 wt % EG (2.25 wt % EG) in case of PP with lower viscosity, exhibiting a strong synergistic effect of EG and PPy in the latter case. In contrast, PPy does not contribute to reduction of thermal percolation concentration. Thermal percolation is observed at 8 wt % EG in PP/EG composites, but no percolation was found in PP/EG‐PPy composites with EG‐PPy contents of up to 20 wt %, corresponding to 7.5 wt % EG. Analyzing the melt rheology it becomes clear that the contribution of PPy to the formation of a filler network is strongly dependent on the matrix viscosity. The comparison of thermal, electrical and rheological percolation reveals that PPy participates in electron transport reducing the electrical percolation but not to heat transport. Overall, we found a good correlation between electrical, thermal, and melt rheological percolation concentrations. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41994.     

Laccase‐catalyzed synthesis of polypyrrole‐multiwalled carbon nanotube composites as energy storage materials for capacitors

Multiwalled carbon nanotubes (MWNTs) were coated with polypyrrole (PPy) using in situ enzymatic polymerization of pyrrole catalyzed by a laccase (benzenediol:oxygen oxidoreductase, EC 1.10.3.2) from Trametes versicolor. Transmission electron microscopy revealed that the MWNTs were uniformly coated with very thin layers of PPy without any indication of globular polymer aggregate formations. The enzymatic synthesis of the MWNTs/PPy composites was quite simple being performed in a one‐pot aqueous solution (pH 4.0) under mild reaction conditions. The potential of the composites with respect to the development of energy storage devices was demonstrated by fabricating a two‐electrode coin cell capacitor (diameter 20 mm, thickness 1.6 mm) utilizing the composites as electrode materials. The capacitance of the cell was 28.0 F g^?1 for the electrode material as measured by a galvanostatic charge–discharge method. The energy density and power density were 2.55 and 805 W kg^?1, respectively, which were close to those of the capacitors classified as ultracapacitors. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43307.     

Synthesis,characterization and supercapacitors of electrically conductive PPy/graphene/rare earth ions composites

PPy/graphene/rare earth ions (PPy/GR/RE³⁺) were prepared using an in situ chemical polymerization of the monomer in the presence of FeCl₃ oxidant and p-toluenesulfonic acid dopant. The PPy/GR/RE³⁺ composites were characterized by FT-IR spectroscopy, four-point probe conductivity, scanning electron microscopy and transmission electron microscopy. The maximum conductivity of PPy/GR/Gd³⁺ composites is about 9.71 S/cm found with 1 wt% GR and 2 wt% Gd³⁺ at room temperature. The capacitance of the composite electrodes was investigated with cyclic voltammetry. As results of this study, the PPy/GR/Gd³⁺ was effective to obtain fully reversible and very fast faradaic reaction. Hence, the PPy/GR/Gd³⁺ could contribute to the pseudo-capacitive charge storage. The PPy/GR/Gd³⁺ exhibited higher specific capacitance of ~238 F/g at 1 A/g current density. Thermal gravimetric analysis demonstrates an improved thermal stability of PPy in the PPy/GR/Gd³⁺ composites.     

Fabrication of carbon nanotubes/polypyrrole/carbon nanotubes/melamine foam for supercapacitor

The carbon nanotubes (CNTs) have been loaded on the melamine foam (MF) to form the composite (CNTs/MF) by dip‐dry process, then polypyrrole (PPy) is coated on CNTs/MF (PPy/CNTs/MF) through chemical oxidation polymerization by using FeCl₃·6H₂O adsorbed on CNTs/MF as oxidant to polymerize the pyrrole vapor. Finally, CNTs are coated on the surface of PPy/CNTs/MF to increase the conductivity of the composite (CNTs/PPy/CNTs/MF) by dip‐dry process again. The composites have been characterized by X‐ray diffraction spectroscopy, scanning electron microscopy and electrochemical method. The results show that the structure of the composites has obvious influence on their capacitive properties. According to the galvanostatic charge/discharge test, the specific capacitance of CNTs/PPy/CNTs/MF is about 184 F g^?1 based on the total mass of the composite and 262 F g^?1 based on the mass of PPy (70.2 wt % in the composite) at the current density of 0.4 A g^?1, which is higher than that of PPy/CNTs/MF (120 F g^?1 based on the total mass of the composite and 167 F g^?1 based on the mass of the PPy). Furthermore, the capacitor assembled by CNTs/PPy/CNTs/MF shows excellent cyclic stability. The capacitance of the cell assembled by CNTs/PPy/CNTs/MF retains 96.3% over 450 scan cycles at scan rate of 20 mV s^?1, which is larger than that assembled by CNTs/PPy/MF (72.5%). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39779.