Degradation kinetics of PVC plasticized with different plasticizers under isothermal conditions

The aim of the present work is to elucidate the degradation kinetics of polyvinyl chloride (PVC) plasticized with some phthalate and nonphthalate plasticizers. A PVC thermomat instrument was utilized to maintain the isothermal degradation conditions at 140 and 160°C, and to suppress the oxidative degradation by means of nitrogen flow. The conductivity measurements were performed to follow hydrogen chloride (HCl) gas which is released upon PVC degradation and trapped in water. Dehydrochlorination of plasticized PVC films occurred with activation energies of about 23–160 and 26–117 kJ mol^?1 and the isokinetic temperatures, at which the dehydrochlorination rate constants of all p‐PVC films would have the same value, were found to be 171 and 128°C for initial and linear regions of dehydrochlorination curve, respectively. Plasticizer incorporation contributes to the stability of the films particularly after the consumption of stabilizer due to the dehydrochlorination. Influence of temperature rise by 20°C on the degradation rate constant is the lowest for DINCH having p‐PVC films as 0.36 and 0.42% increment at the initial region and linear region, respectively. On the other hand, DOTP reveals greater stability than the others do since the compensation ratio of the PVC film having DOTP is greater than the other films. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41579.     

Migration of phthalate and non‐phthalate plasticizers out of plasticized PVC films into air

The aim of the present work is to provide information about the migration of phthalate and non‐phthalate plasticizers generally used in flexible polyvinyl chloride (PVC) applications. Plastisols (pastes) were prepared by mixing PVC, plasticizer, and thermal stabilizer. The plasticized PVC (p‐PVC) films are obtained by gelation at 160°C for 15 min. The p‐PVC films were heat treated at 50, 85, 100, 130, and 160°C up to 420 min to follow the mass loss to find out diffusivity of plasticizer out of films into air and to determine related activation energies. The films having di‐octyl terephthalate (DOTP) and di‐isononyl 1,2‐cyclohexanedicarboxylic acid (DINCH) exhibited the lowest mass loss in general, among the phthalate and non‐phthalate plasticizer having p‐PVC films, respectively, as confirmed by FTIR investigation. The same tendency was observed for diffusion coefficients and for the activation energies of migration. The diffusion coefficients were found to be around 3.5 × 10^?18–2.1 × 10^?17 m²/sec for the studied plasticizers in PVC at 50°C and around 4.0 × 10^?15–9.9 × 10^?14 m²/sec at 160°C. The activation energies for 85–160°C interval were determined to be between 70 and 153 kJ/mol (0.72–1.58 eV) for the plasticizers used herein those could be treated as a homologous series as deduced from the related compensation factors. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Emissivity values for poly(vinyl chloride) with varying plasticizer compositions

The emissivity of plasticized poly(vinly chloride) (PVC) containing varying compositions and amounts of plasticizer was investigated. The four plasticizers examined were dibutyl phthalate (DBP), dioctyl phthalate (DOP), diisodecyl phthalate (DIDP) (Phthalic acid type), and dioctyl adipate (DOA) (adipic acid type). The emmissivity of plasticized PVC film increased almost equally with the difference in the compositions between DOP and DOA. It was also clear that the emissivity of the plasticized PVC film decreased gradually with the molecular sequence length of DBP, DOP, and DIDP.     

Photolysis of dialkyl phthalates and poly(vinyl chloride) plasticized with dialkyl phthalates at wavelengths exceeding 290 nm

When dialkyl phthalate plasticizers, neat poly(vinyl chloride), PVC, and PVC plasticized with dialkyl phthalate are subjected to near UV radiation at λ_inc > 290 nm, chemical alterations are induced by traces of impurities capable of absorbing light in this wavelength range. The main photoproducts formed in the case of neat phthalates are olefins, alcohols, and phthalic acid anhydride. Neat PVC undergoes C? Cl bond cleavage and, in addition, carbonyl and polyene groups are formed. The formation of carbonyl groups is a nonlinear (auto-accelerated) process whereas polyene generation occurs linearly with increasing irradiation time. The photolysis of phthalate-plasticized PVC is characterized by the decomposition of the plasticizer, evidenced by the decrease in the absorption band at 278 nm, and by the formation of carbonyl groups attached to PVC and the cleavage of C? Cl bonds as evidenced by the increase or decrease in the IR absorption bands at about 1710 and 617/639 cm^?1, respectively. Phthalates hardly influence the incorporation of carbonyl groups into PVC (an auto-accelerated process) and retard only slightly the cleavage of C? Cl bonds. By contrast, phthalates sensitize the incorporation of carbonyl groups upon irradiation at λ_inc = 254 nm. Within the error limit no effect of the chemical nature of the phthalate on the formation of photoproducts was detectable upon performing irradiations at λ_inc > 290 nm.     

无毒环保型增塑剂对聚氯乙烯性能的影响

选用了邻苯增塑剂(DOP)、柠檬酸酯类增塑剂（ATBC、ATOC）、对苯增塑剂（DOTP）、偏苯增塑剂（TOTM）及新型植物基增塑剂ID-37制备了增塑PVC材料,对所制备的PVC材料的拉伸强度、断裂伸长率、硬度、180℃热稳定性进行表征,测试结果表明,180℃静态热稳定性DOTP与TOTM最优,DOP与ID37次之,ATBC与ATOC相当。增塑剂对力学性能影响较小,对硬度差异影响较大,其中DOTP与TOTM所增塑PVC材料硬度比其余四种高约5度（邵氏A）。DSC测试结果表明,TOTM及ATBC增塑PVC的Tg相对较高,约为-22℃,其余四种较为接近,约为-25℃。     

Plasticizers derived from cardanol: synthesis and plasticization properties for polyvinyl chloride(PVC)

Two natural plasticizers derived from cardanol (CD), cardanol acetate (CA) and epoxidized cardanol acetate (ECA), were synthesized and characterized by ¹H NMR and ¹³C NMR. The plasticizing effects of the obtained plasticizers on semi-rigid polyvinylchloride (PVC) formulations were also investigated. Two commercial phthalate ester plasticizers, dioctyl terephthalate (DOTP) and diisononyl phthalate (DINP), were used as controls. Mechanical and thermal properties, compatibility, thermal stability, microstructure, and workability were assessed by dynamic mechanical analysis (DMA), mechanical analysis, thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and dynamic stability analysis, respectively. Results indicated that the natural plasticizer ECA had overallsuperior flexibility, compatibility, thermal stability, and workability comparable to both controls. The obtained CA and ECA have lower volatility resistance and similar extraction and exudation resistance than that of DOTP and DINP. The CA was further blended with DOTP in soft PVC films. Results of DMA, TGA and mechanicalanalysis indicated that CA can serve as a secondary plasticizer to improve the related properties of soft PVC formulations. These CD derived plasticizers show promise as an alternative to fully or partially replace petroleum-based plasticizers.     

Synthesis and application of a natural plasticizer based on cardanol for poly(vinyl chloride)

A natural plasticizer with multifunctional groups, similar in structure to phthalates, cardanol derivatives glycidyl ether (CGE) was synthesized from cardanol by a two‐step modification process and characterized by FT‐IR, ¹HNMR, and ¹³CNMR. The resulting product was incorporated to PVC (CGE/PVC), and plasticizing effect was compared with PVC incorporated with two kinds of commercial phthalate ester plasticizers bis (2‐ethylhexyl) benzene‐1,4‐dicarboxylate (DOTP) and diisononyl phthalate (DINP). Dynamic mechanical analysis and mechanical properties testing of the plasticized PVC samples were performed in order to evaluate their flexibility, compatibility, and plasticizing efficiency. SEM was employed to produce fractured surface morphology. Thermogravimetric analysis and discoloration tests were used to characterize the thermal stabilities. Dynamic stability analysis was used to test the processability of formulations. Compared with DOTP and DINP plasticized samples, CGE/PVC has a maximum decrease of 9.27% in glass transition temperature (T_g), a maximum increase of 17.6% in the elongation at break, and a maximum increase of 31.59°C and 25.31 min in 50% weight loss (T50) and dynamic stability time, respectively. The obtained CGE also has slightly lower volatility resistance and higher exudation resistance than that of DOTP and DINP. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42465.     

低分子量聚四氢呋喃二苯甲酸酯的增塑性能分析

以传统的邻苯二甲酸二辛酯（DOP）和聚醚型二甘醇二苯甲酸酯（DEDB）增塑剂作对比,对聚四氢呋喃二苯甲酸酯（PTMGDB₅₀₀）增塑剂增塑的聚氯乙烯（PVC）材料进行研究。本文对增塑剂增塑的PVC材料进行了FTIR和TG表征,并考察了其力学性能、耐乙醇抽出性及耐迁移性。结果表明,增塑剂PTMGDB₅₀₀增塑的PVC材料在力学性能上介于DOP和DEDB两者之间,而PTMGDB₅₀₀与PVC间的相互作用更强,在耐迁移、耐乙醇抽出、耐热及耐压等性能方面均优于DOP及DEDB,因此PTMGDB₅₀₀可作为部分替代DOP和DEDB的增塑剂。     

对苯二甲酸二辛酯(DOTP)研制浅析

通过对对苯二甲酸二辛酯(DOTP)两种生产工艺的实验对比、浅析,结和生产实际最后选择采用对苯二甲酸(TPA)法(直接酯化法)生产DOTP。DOTP是聚氯乙烯(PVC)塑料用的一种性能优良的主增塑剂,它与目前常用的邻苯二甲酸二辛酯(DOP)相比,具有耐热、耐寒、难挥发、抗抽出、柔软性和电绝缘性能好等优点。由于(DOTP)不含邻苯二甲酸盐,不在欧盟及其他国家限制使用的16种含邻苯二甲酸增塑剂范围内,是一种优良的环保型增塑剂。     

Preparation of some mixed diesters of aliphatic diols and their evaluation as plasticizers

Mixed diesters of three diols-ethylene glycol, diethylene glycol, and 2-butene-1,4-diol—were prepared wherein one of the ester moieties was benzoate. The laurates were shown to be excellent plasticizers for polyvinyl chloride (PVC) resin. Diesters containing two aroyl groups, or benzoyl and a short branched-chain alkanoyl group were also shown to be compatible plasticizers for PVC resin. Longer chain acids, including oleic and erucic, gave incompatible plasticizers. Benzoyloxyethoxyethyl laurate plasticized PVC had low temperature properties, volatility, and thermal stability superior to PVC plasticized with di-2-ethylhexyl phthalate.     

Synthesis and evaluation of epoxidized vegetable oleic acid as a novel environmental benign plasticizer for polyvinyl chloride

A bio-based plasticizers, acetyl-oleate triethylene glycol (AOT), was successfully synthesized by using oleic acid as a raw material through esterification, epoxidation, and acetylation. Its structure was analyzed by Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance. The plasticizing performances of this plasticizer was compared with those of two commercial ones: dioctyl terephthalate (DOTP) and dioctyl adipate (DOA). This was done by blending these plasticizers with PVC, respectively. Thermal gravimetric analysis results showed that the 5% weight loss temperature of PVC with AOT was 53°C higher than that of DOA and 36°C higher than that of DOTP. The tensile results showed that the AOT plasticized PVC had excellent stretchability: its elongation at break with 50 phr AOT reached 697.7%. Furthermore, its transmittance was as high as 90%, showing better compatibility of ATO with PVC.     

Synthesis of bis(2,4-diphenylbutyl) phthalate and its application as a plasticizer for poly(vinyl chloride) from waste polystyrene

Bis(2,4-diphenylbutyl) phathalate, a plasticizer for poly(vinyl chloride) (PVC), was synthesized from 2,4-diphenyl-1-butene obtained by a thermal decomposition under reduced pressure of waster polystyrene. The heat stability of bis(2,4-diphenylbutyl) phthalate was determined by thermogravimetric analysis and compared with typical plasticizers. It was recognized that bis(2,4-diphenylbutyl) phthalate showed high heat resistant. A test sheet of plasticized PVC with bis(2,4-diphenylbutyl) phthalate and bis(2-ethylhexyl) phthalate was prepared. The test sheet was used for determination of the plasticizing performance of bis(2,4-diphenylbutyl) phthalate. Although the effect of bis(2,4-diphenylbutyl) phthalate imparting flexibility to PVC is poorer than that of bis(2-ethylehexyl) phthalate, the former phthalate is well compatible with PVC and exceedingly heat-resistant.     

Poly(vinyl chloride) films plasticized with novel poly‐nadic‐anhydride polyester plasticizers

In this work, several novel poly‐nadic‐anhydride polyester plasticizers were developed to be used in poly(vinyl chloride) (PVC) film fabrication for the first time. Mechanical properties of the films, the compatibility of plasticizers in PVC resin, as well as testing of migration of the plasticizers, were performed in order to evaluate the efficiency of plasticization. Scanning electron microscopy, Fourier‐transform infrared spectroscopy, thermogravimetric analysis, and differential scanning calorimetry were used to characterize the unplasticized and plasticized polymer. The results demonstrated that the as‐prepared poly‐nadic‐anhydride plasticized PVC film significantly improved the plasticization efficiency of PVC film based on the increase in the break in elongation of the films. According to scanning electron microscopy analysis, the poly‐nadic‐anhydride polyester plasticizers presented good compatibility with PVC resin. In volatility and extraction tests, PVC films plasticized with the poly‐nadic‐anhydrides showed enhanced migration resistance. The plasticizing effects induced by the poly‐nadic‐anhydride polyester plasticizers were also confirmed by a glass transition temperature shift toward lower temperatures in the plasticized films. J. VINYL ADDIT. TECHNOL., 23:321–328, 2017. © 2015 Society of Plastics Engineers     

Castor Epoxy Fatty Acid Alkyl Ester Estolides as Bioplasticizers for Poly(Vinyl Chloride)

Epoxy fatty acid alkyl ester estolides were synthesized from castor oil to be used as biobased plasticizers for poly(vinyl chloride) (PVC) as a safer replacement for phthalate plasticizers. Initially, castor oil was transesterified with methanol or n-butanol to quantitatively yield castor fatty acid alkyl esters. Acetylation of hydroxyl function with acetic anhydride led to the formation of estolide. The unsaturation was epoxidized, resulting in a bifunctional epoxy fatty acid alkyl ester estolide. The bioplasticizers were compounded with PVC and were evaluated for their functionality and compared with commercial phthalate plasticizer diisononyl phthalate (DINP) and nonphthalate 1,2-cyclohexanoic acid diisononyl ester (DINCH). The bioplasticizers showed excellent gelation, efficiency, and compatibility, as well as plastisol viscosity and thermal properties, comparable to or better than the plastisols prepared with commercial controls DINP and DINCH. The volatility of the methyl ester was inferior to the butyl ester. Both compounds showed low water resistance properties. Further evaluation of the butyl ester under tropical conditions of high temperature and humidity confirmed limited compatibility. This indicates that the castor epoxy fatty acid ester estolides would be better suited for applications that do not come in contact with water for prolonged periods, such as flooring, artificial leather, wiring, or wall coverings.     

Dialkyl furan‐2,5‐dicarboxylates,epoxidized fatty acid esters and their mixtures as bio‐based plasticizers for poly(VInylchloride)

Dialkyl furan‐2,5‐dicarboxylates and epoxidized fatty acid esters (EFAE) of varying molecular weights and volatilities, as well as their mixtures, were investigated as alternative plasticizers for poly(vinylchloride) (PVC). The EFAE utilized were epoxidized soybean oil (ESO) and epoxidized fatty acid methyl ester (e‐FAME). All plasticizers were compatible with PVC, with plasticization efficiencies usually increasing with decreasing molecular weights of the plasticizers (except in the case of ESO, which was remarkably effective at plasticizing PVC, in spite of its relatively high molecular weight). In comparison with phthalate and trimellitate plasticizers, the alternatives generally yielded improved balance of flexibility and retention of mechanical properties after heat aging, with particularly outstanding results obtained using 30?50 wt % e‐FAME in mixtures with diisotridecyl 2,5‐furandicarboxylate. Although heat aging characteristics of the plasticized polymer were often related to plasticizer volatilities, e‐FAME performed better than bis(2‐ethylhexyl) 2,5‐furandicarboxylate, and bis(2‐ethylhexyl) phthalate of comparatively higher molecular weights. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42382.     

Diamide derivatives as photostabilizers for plasticized poly(vinyl chloride)

Some diamide derivatives have been prepared, characterized, and investigated as photostabilizers for plasticized poly(vinyl chloride) (PVC), containing dioctyl phthalate and dibutyl phthalate in a concentration of 30% by weight of the polymer. The stabilizing efficiency of the prepared diamides was evaluated by determining the weight loss percentage that resulted from HCl evolution during the photodegradation process. Moreover, the efficiency was evaluated by determining the amount of gel formed as well as the intrinsic viscosity of the soluble fractions of the photodegraded polymer. The extent of discoloration of the photodegraded stabilized and plasticized PVC was also investigated. The stabilization mechanism and the effect of plasticizers on the photostability of PVC are discussed. J. Vinyl Addit. Technol., 2008. © 2008 Society of Plastics Engineers     

Revisiting analysis of phthalate plasticizers concentration in poly(vinyl chloride)

The method of the efficient analysis of di(2‐diethylhexyl) phthalate, tri(2‐ethylhexyl) trimellitate, di(2‐ethylhexyl) terephthalate, and other phthalate plasticizers concentrations in plasticized poly(vinyl chloride) (PVC) was developed. The method is based on quantitative dissolution of the PVC sample in methyl ethyl ketone with the consequent precipitation of PVC with hexane and concentration of phthalate in an organic layer. A capillary column‐based gas chromatographic technique for phthalates separation and quantification was developed and used in conjunction with the PVC and phthalates dissolution technique. The developed method of phthalate plasticizers analysis proved to be relatively fast, reproducible, and straightforward. J. VINYL ADDIT. TECHNOL., 21:197–204, 2015. © 2014 Society of Plastics Engineers     

On the Heat Stabilization Efficiency of Polyester Plasticizers for Poly(vinyl chloride) (PVC)

Four different polyester plasticizers for poly‐(vinyl chloride) (PVC), having moderate acid numbers (11.5–20.5 mg KOH/g resin), were synthesized. These polyesters were modified by converting the terminal COOH group to Ba(II) and Cd(II) carboxylate salts in order to introduce the capability of heat stabilization for PVC. The modified polyesters were applied as dual function polyesters, i.e., as plasticizers and stabilizers at the same time. The thermal stabilization efficiency of the formed plasticized PVC films was tested photometrically and the data obtained were compared with that afforded by “Irgastab BZ 556”. The efficiencies of these modified polyesters as heat stabilizers for PVC were found to be comparable with that afforded by “Irgastab BZ 556”.     

Component interactions and properties of crosslinked vinyl systems

Compositions based on poly(vinylchloride) (PVC) containing diisodecyl phthalate (DIDP) or trioctyl trimellitate (TOTM) plasticizers and, in several cases, also containing chlorinated polyethylene (CPE) as property modifier were cross-linked by γ irradiation, using a trifunctional acrylic cross-linking agent. Cross-linking effectiveness was analyzed by solvent swelling data, and the effects of irradiation up to dosages of about 10 Mrad on the mechanical properties of the systems were recorded. The interaction potential of components used in these systems was determined by recently developed methods of inverse gas chromatography (IGC). These classify PVC and CPE as electron acceptors and the plasticizers as donors. Expectedly, increased moduli and decreased elongational properties follow exposure to γ-rays. The plasticizers reduce the effectiveness of cross-linking, the magnitude of the reduction being related to the degree of acid-base interaction between PVC and plasticizing fluids. Interference with cross-linking mechanisms thus is a function of the solvent power of the plasticizers. CPE competes with PVC for plasticizer so that for given quantities of DIDP or TOTM, the fraction available to solubilize the host polymer is reduced. In compounds with CPE, therefore, the cross-linking effectiveness of irradiation is raised, consistent with the acid-base balance of Interactions, as given by the IGC results. Twin yield points have been observed in the stress-strain curves of compounds containing CPE. It is postulated that distinct, interpenetrating cross-link networks are formed when these polymers are subjected to γ irradiation.     

Effect of ketal group in castor oil acid-based plasticizer on the properties of poly(vinyl chloride)

Two castor oil acid esters containing a ketal or ketone group (KCL or CL), as alternative plasticizers for poly(vinyl chloride) (PVC), were prepared. The structures were confirmed by ¹H NMR and FTIR spectroscopies. The effects of the presence of a ketal or ketone group in these compounds on PVC plasticization were examined. The DMA and SEM results showed that both plasticizers were miscible with PVC and exhibited excellent plasticizing properties, compared to those of dioctyl phthalate (DOP). The PVC plasticized by KCL displayed a lower T_g value of 20.6 ° C, which was lower than that of PVC plasticized with DOP (22.3 ° C) and PVC plasticized with CL (40.5 ° C). Tensile tests indicated that PVC plasticized using KCL showed a 37% higher of elongation at break than PVC plasticized by CL and 30% higher than PVC plasticized by DOP. The plasticizing mechanism was also investigated. Moreover, exudation, volatility, and extraction tests, along with TGA indicated that the presence of ketal groups effectively improved the migration resistance of plasticizer and the thermal stability of PVC blends. Taken together, introducing ketal groups into plasticizer might be an effective strategy for improving its plasticizing efficiency.