Proton‐conducting blend membranes of crosslinked poly(vinyl alcohol)–sulfosuccinic acid ester and poly(1‐vinyl‐1,2,4‐triazole) for high temperature fuel cells

New type of composite membranes were synthesized by crosslinking of poly(vinyl alcohol) (PVA) with sulfosuccinic acid (SSA) and intercalating poly(1‐vinyl‐1,2,4‐triazole) (PVTri) into the resulting matrix. The complexed structure of the membranes was confirmed by Fourier transform infrared (FTIR) spectroscopy. The resulting hybrid membranes were transparent, flexible, and showed good thermal stability up to ～200°C. The proton conductivities of the membranes were investigated as a function of PVTri and SSA and operating temperature. The water/methanol uptake was measured and the results showed that solvent absorption of the materials increased with increasing PVTri content in the matrix. The proton conductivity of the membranes continuously increased with increasing SO₃H content, PVTri content, and the temperature. In the anhydrous state, the maximum proton conductivity is 7.7 × 10^?5 S/cm for PVA–SSA–PVTri‐1 and for PVA–SSA–PVTri‐3 is 1.6 × 10^?5 S/cm at 150°C. After humidification (RH = 100%), PVA–SSA–PVTri‐4 showed a maximum proton conductivity of 0.0028 S/cm at 60°C. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Phosphonic acid functionalized siloxane crosslinked with 3‐glycidoxyproyltrimethoxysilane grafted polybenzimidazole high temperature proton exchange membranes

Phosphonic acid functionalized siloxane crosslinked with 3‐glycidoxypropyltrimethoxysilane (GPTMS) grafted polybenzimidazole (PBI) membranes are prepared by sol–gel process. The structure of the membranes is characterized by Fourier‐transform infrared spectroscopy and X‐ray diffraction spectroscopy. SEM images of the membranes show that the membranes are homogeneous and compact. The crosslinked membranes exhibit excellent thermal stability, chemical stability and mechanical property. The proton conductivity of the crosslinked membranes increases by an order of magnitude over range of 20 °C to 160 °C under anhydrous condition, which can reach 3.15 × 10^?2 S cm^?1 at 160 °C under anhydrous condition. The activation energy of proton conductivity for membranes decreases with increase of PBI, because the formation of hydrogen bond network between the phosphonic acid and the imidazole ring can enhance the continuity of hydrogen bond in the membrane. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44818.     

SPES‐SiO2 hybrid proton exchange membranes from in situ sol–gel process of negatively charged alkoxysilane

One type of negatively charged alkoxysilane, that is, sulfonated 3‐(mercaptopropyl)trimethoxysilane (SMPTS), has been developed from 3‐(mercaptopropyl)trimethoxysilane (MPTS) and hydrogen peroxide. SMPTS is used to modify sulfonated poly(ether sulfone) (SPES) through in situ sol–gel process. The membranes with proper SMPTS dosage show enhanced ion exchange capacity (IEC), hydrophilicity, mechanical strength, chemical stability, and proton conductivity, which prove that SMPTS is an effective modifier for preparing proton‐exchange hybrid membranes. With MPTS of 5–20%, the hybrid membranes exhibit IEC 1.34–1.50 mmol g^?1, thermal stability 264–316°C, and proton conductivity 0.0015–0.0102 S cm^?1 and thus recommended for potential application in fuel cells. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Free‐standing hybrid anion‐exchange membranes for application in fuel cells

A series of free‐standing hybrid anion‐exchange membranes were prepared by blending brominated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (BPPO) with poly(vinylbenzyl chloride‐co‐γ‐methacryloxypropyl trimethoxy silane) (poly(VBC‐co‐γ‐MPS)). Apart from a good compatibility between organic and inorganic phases, the hybrid membranes had a water uptake of 32.4–51.8%, tensile strength around 30 MPa, and T_d temperature at 5% weight loss around 243–261°C. As compared with the membrane prepared from poly (VBC‐co‐γ‐MPS), the hybrid membranes exhibited much better flexibility, and larger ion‐exchange capacity (2.19–2.27 mmol g^?1) and hydroxyl (OH^?) conductivity (0.0067–0.012 S cm^?1). In particular, the hybrid membranes with 60–75 wt % BPPO had the optimum water uptake, miscibility between components, and OH^? conductivity, and were promising for application in fuel cells. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

A copolymer of poly[2,2′‐(m‐phenylene)‐5,5′‐ bibenzimidazole] and poly(2,5‐benzimidazole) for high‐temperature proton‐conducting membranes

A novel copolymer of polybenzimidazoles was prepared by copolymerization of 3,3′‐diaminobenzidine tetrahydrochloride, 3,4‐diaminobenzoic acid and isophthalic acid in polyphosphoric acid at 200 °C. The polymerization could be performed within 90–110 min with the assistance of microwave irradiation. The solubility of the copolymer obtained in N,N‐dimethylacetamide (DMAc) was improved compared with those of poly[2,2′‐(m‐phenylene)‐5,5′‐bibenzimidazole] and poly(2,5‐benzimidazole). Thus copolymer membranes could be readily prepared by dissolving the copolymer powders in DMAc with refluxing under ambient pressure. The decomposition temperature of the copolymer was about 520 °C in air according to thermogravimetric analysis data. The proton conductivity and mechanical strength of the phosphoric acid‐doped copolymer membranes were investigated at elevated temperatures. A conductivity of 0.09 S cm^?1 at 180 °C and a tensile stress at break of 5.9 MPa at 120 °C were achieved for the acid‐doped copolymer membranes by doping acids in a 75 wt% H₃PO₄ solution. Copyright © 2010 Society of Chemical Industry     

High Performance Ion Exchange Membranes Prepared via Direct Polyacylation of Racemic and (S)‐1,1′‐Binaphthyl‐Based Cationic/Anionic Monomers

Side‐chain‐type sulfonated/quaternized aromatic polyelectrolytes with precisely controlled contents of ionized groups are successfully synthesized via direct polyacylation of sulfonated/quaternized monomers based on 2,2′‐dihydroxy‐1,1′‐binaphthyl (DHBN). Both proton exchange membranes (PEMs) and anion exchange membranes (AEMs) of the corresponding polyelectrolytes exhibit outstanding properties. Proton conductivity (116 mS cm^?1 at 30 °C) higher than Nafion 115 for the PEMs and OH^– conductivity (28.5–53.7 mS cm^?1 at 30 °C) comparable to Tokuyama A901 for the AEMs are accomplished. In addition, the AEMs can withstand 60 days’ aging in 1 mol L^?1 NaOH at 60 °C without degradation, as proved by ¹H NMR. More intriguingly, when starting from optically active (S)‐DHBN instead of racemic DHBN, an enhancement in proton conductivity of PEMs is observed for the first time, which opens a new door to optically active ion exchange membranes.     

New organic–inorganic hybrid membranes based on sulfonated polyimide/aminopropyltriethoxysilane doping with sulfonated mesoporous silica for direct methanol fuel cells

A series of novel composite methanol‐blocking polymer electrolyte membranes based on sulfonated polyimide (SPI) and aminopropyltriethoxysilane (APTES) doping with sulfonated mesoporous silica (S‐mSiO₂) were prepared by the casting procedure. The microstructure and properties of the resulting hybrid membranes were extensively characterized. The crosslinking networks of amino silica phase together with sulfonated mesoporous silica improved the thermal stability of the hybrid membranes to a certain extent in the second decomposition temperature (250–400°C). The composite membranes doping with sulfonated mesoporous silica (SPI/APTES/S‐mSiO₂) displayed superior comprehensive performance to the SPI and SPI/APTES membranes, in which the homogeneously embedded S‐mSiO₂ provided new pathways for proton conduction, rendered more tortuous pathways as well as greater resistance for methanol crossover. The hybrid membrane with 3 wt % S‐mSiO₂ into SPI/APTES‐4 (SPI/A‐4) exhibited the methanol permeability of 4.68 × 10^?6 cm² s^?1at 25°C and proton conductivity of 0.184 S cm^?1 at 80°C and 100%RH, while SPI/A‐4 membrane had the methanol permeability of 5.16 × 10^?6 cm² s^?1 at 25°C and proton conductivity of 0.172 S cm^?1 at 80°C and 100%RH and Nafion 117 exhibited the values of 8.80 × 10^?6 cm² s^?1 and 0.176 S cm^?1 in the same test conditions, respectively. The hybrid membranes were stable up to about 80°C and demonstrated a higher ratio of proton conductivity to methanol permeability than that of Nafion117. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Solid polymer electrolytes. XI. Preparation,characterization and ionic conductivity of new plasticized polymer electrolytes based on chemical‐covalent polyether–siloxane hybrids

A new hybrid polymer electrolyte system based on chemical‐covalent polyether and siloxane phases is designed and prepared via the sol–gel approach and epoxide crosslinking. FT‐IR, ¹³C solid‐state NMR, and thermal analysis (differential scanning calorimetry (DSC) and TGA) are used to characterize the structure of these hybrids. These hybrid films are immersed into the liquid electrolyte (1M LiClO₄/propylene carbonate) to form plasticized polymer electrolytes. The effects of hybrid composition, liquid electrolyte content, and temperature on the ionic conductivity of hybrid electrolytes are investigated and discussed. DSC traces demonstrate the presence of two second‐order transitions for all the samples and show a significant change in the thermal events with the amount of absorbed LiClO₄/PC content. TGA results indicate these hybrid networks with excellent thermal stability. The EDS‐0.5 sample with a 75 wt % liquid electrolyte exhibits the ionic conductivity of 5.3 × 10^?3 S cm^?1 at 95°C and 1.4 × 10^?3 S cm^?1 at 15°C, in which the film shows homogenous and good mechanical strength as well as good chemical stability. In the plot of ionic conductivity and composition for these hybrids containing 45 wt % liquid electrolyte, the conductivity shows a maximum value corresponding to the sample with the weight ratio of GPTMS/PEGDE of 0.1. These obtained results are correlated and used to interpret the ion conduction behavior within the hybrid networks. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1000–1007, 2006     

Polystyrene‐based anion exchange membranes via click chemistry: improved properties and AEM performance

Polystyrene‐based anion exchange membranes (AEMs) have been fabricated using in situ click chemistry between azide and alkyne moieties introduced as side groups on functionalized polymers. The membrane properties such as water uptake, swelling ratio and conductivity were affected by the number of cations and the degree of crosslinking. The membranes containing a larger amount of trimethylammonium cationic groups (i.e. higher ion exchange capacity) showed high hydroxide conductivity when immersed in KOH solution, exhibiting a peak in conductivity (156 mS cm^?1) in 3 mol L^–1 KOH solution. A higher degree of crosslinking tended to decrease conductivity. These membranes demonstrated relatively good stability in 8 mol L^–1 KOH at 60 °C and maintained 33%–62% of initial conductivity after 49 days with most of the loss in conductivity occurring in early stages of the test. In an alkaline fuel cell, the areal specific resistance was constant indicating good stability of the membranes. The observed peak power density (157 mW cm^?2) was comparable to that of other AEM‐based fuel cells reported. © 2018 Society of Chemical Industry     

Preparation and properties of alkaline anion exchange membrane with semi‐interpenetrating polymer networks based on poly(vinylidene fluoride‐co‐hexafluoropropylene)

Alkaline anion exchange membrane with semi‐interpenetrating polymer network (s‐IPN) was constituted based upon quaternized poly(butyl acrylate‐co‐vinylbenzyl chloride) (QPBV) and poly(vinylidene fluoride‐co‐hexafluoropropylene) [P(VDF‐HFP)]. The QPBV was synthesized via the free radical copolymerization, followed by quaternization with N‐methylimidazole. The s‐IPN system was constituted by melting blend of QPBV and P(VDF‐HFP), and then crosslinking of P(VDF‐HFP). Ion exchange capacity, water uptake, mechanical performance, and thermal stability of these membranes were characterized. TEM showed that alkaline anion exchange membrane exhibited s‐IPN morphology with microphase separation. The fabricated s‐IPN membrane exhibited hydroxide ion conductivity up to 15 mS cm^?1 at 25 °C and a maximum DMFC power density of 46.55 mW cm^?2 at a load current density of 98 mA cm^?2 at 30 °C. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45775.     

Preparation and characterization of proton exchange membrane based on polyphosphoric acid modified by PVDF‐HFP

A polyphosphoric acid functionalized proton exchange membrane (PEM) was prepared by a ring opening reaction using the epoxycyclohexylethyltrimethoxysilane (EHTMS) and amino trimethylene phosphonic acid (ATMP) as raw materials and was modified by poly(vinylidene fluoride)–hexafluoro propylene (PVDF‐HFP). The structure of the membranes was characterized by Fourier transform infrared and scanning electron microscopy. The X‐ray photoelectron spectroscopy explores the content of the elements in the membrane related to the ion exchange capacity value. The membranes’ properties including water uptake, swelling ratio, proton conductivity, and hydrolysis stability were studied. Performance tests show that when ATMP/EHTMS = 1/5, conductivity of the PVDF‐HFP modified PEMs increased from 0.83 × 10^?4 S cm^?1 at 20 °C to 9.53 × 10^?3 S cm^?1 at 160 °C, the swelling ratio of membranes decreased from 2.71% to 2.13%. The results indicate that the introduction of F atoms is beneficial to increase the proton conductivity and the dimensional stability. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46737.     

Sulfonated poly(sulfone‐pyridine‐amide)/sulfonated polystyrene/multiwalled carbon nanotube‐based fuel cell membranes

In this study, aromatic sulfonated poly(sulfone‐pyridine‐amide) (S‐PSPA) has been prepared via polycondensation of sulfonated monomer 1‐(4‐thiocarbamoylaminophenyl‐sulfonylphenyl)thiourea and 2,6‐pyridinedicarboxylic acid at high temperature. Mechanically robust and thermally stable hybrid membranes were prepared using non‐functional and functional multiwalled carbon nanotube (MWCNT) i.e., S‐PS/S‐PSPA/MWCNT‐NF and S‐PS/S‐PSPA/MWCNT via solution blending. Field emission scanning electron microscopy exhibited porous membrane structure for 0.1–0.5 wt% nanotube loading, whereas well‐aligned functional MWCNT were observed in 1 wt% loaded sample. Increasing the functional nanotube content from 0.1 to 1 wt% increased tensile strength of functional S‐PS/S‐PSPA/MWCNT hybrids from 62.19 to 65.29 MPa compared with non‐functional hybrid (53.34 MPa) and neat S‐PS/S‐PSPA. 10% decomposition temperature of S‐PS/S‐PSPA/MWCNT 0.1–1 was in the range 491–502°C, while S‐PS/S‐PSPA/MWCNT‐NF showed relatively lower thermal stability (T₁₀ 489°C). Glass transition temperature of functional S‐PS/S‐PSPA/MWCNT was also higher (201–243°C) relative to S‐PS/S‐PSPA/MWCNT‐NF (194°C). Furthermore, functional MWCNT‐based membranes had higher ion exchange capacity (IEC) 3.2–3.6 mmol/g and lower activation energies (95–36 kJ/mol). Novel functional membranes also revealed high proton conductivity 1.68–2.55 S/cm in a wide range of humidity at 80°C higher than that of perfluorinated Nafion® membrane (1.1 ×10^?1 S/cm) at 80°C (94% RH). POLYM. ENG. SCI., 55:1776–1786, 2015. © 2014 Society of Plastics Engineers     

Novel anion‐exchange organic‐inorganic hybrid membranes prepared through sol‐gel reaction and UV/thermal curing

Anion‐exchange organic‐inorganic hybrid membranes were prepared through sol‐gel reaction and UV/thermal curing of positively charged alkoxysilane and the alkoxysilane containing acrylate or epoxy groups. Properties of prepared hybrid membranes were varied by control of the molar ratio of the precursors. It was shown that the thermal degradation temperatures (T_d) of the membranes were in the range of 212–226°C, water uptakes in the range of 9.6–14.6% and IEC values in the range of 0.9–1.6 mmol g^?1. The hybrid membranes show high permeability to anions, as reflected by the high static transport number (t_?) of the anion (Cl^?). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis and Electrochemical Properties of BaFe1−xCuxO3−δ Perovskite Oxide for IT‐SOFC Cathode

A series of iron‐based perovskite oxides BaFe_1−xCu_xO_3−δ (x = 0.10, 0.15, 0.20 and 0.25, abbreviated as BFC‐10, BFC‐15, BFC‐20 and BFC‐25, respectively) as cathode materials have been prepared via a combined EDTA‐citrate complexing sol‐gel method. The effects of Cu contents on the crystal structure, chemical stability, electrical conductivity, thermal expansion coefficient (TEC) and electrochemical properties of BFC‐x materials have been studied. All the BFC‐x samples exhibit the cubic phase with a space group Pm3m (221). The electrical conductivity decreases with increasing Cu content. The maximum electrical conductivity is 60.9 ± 0.9 S cm⁻¹ for BFC‐20 at 600 °C. Substitution of Fe by Cu increases the thermal expansion coefficient. The average TEC increases from 20.6 × 10⁻⁶ K⁻¹ for BFC‐10 to 23.7 × 10⁻⁶ K⁻¹ for BFC‐25 at the temperature range of 30–850 °C. Among the samples, BFC‐20 shows the best electrochemical performance. The area specific resistance (ASR) of BFC‐20 on SDC electrolyte is 0.014 Ω cm² at 800 °C. The single fuel cell with the configguration of BFC‐20/SDC/NiO‐SDC delivers the highest power density of 0.57 W cm⁻² at 800 °C. The favorable electrochemical activities can be attributed to the cubic lattice structure and the high oxygen vacancy concentration caused by Cu doping.     

Electrospun poly(lithium 2‐acrylamido‐2‐methylpropanesulfonic acid) fiber‐based polymer electrolytes for lithium‐ion batteries

Novel single‐ion conducting polymer electrolytes based on electrospun poly(lithium 2‐acrylamido‐2‐methylpropanesulfonic acid) (PAMPSLi) membranes were prepared for lithium‐ion batteries. The preparation started with the synthesis of polymeric lithium salt PAMPSLi by free‐radical polymerization of 2‐acrylamido‐2‐methylpropanesulfonic acid, followed by ion‐exchange of H⁺ with Li⁺. Then, the electrospun PAMPSLi membranes were prepared by electrospinning technology, and the resultant PAMPSLi fiber‐based polymer electrolytes were fabricated by immersing the electrospun membranes into a plasticizer composed of ethylene carbonate and dimethyl carbonate. PAMPSLi exhibited high thermal stability and its decomposition did not occur until 304°C. The specific surface area of the electrospun PAMPSLi membranes was raised from 9.9 m²/g to 19.5 m²/g by varying the solvent composition of polymer solutions. The ionic conductivity of the resultant PAMPSLi fiber‐based polymer electrolytes at 20°C increased from 0.815 × 10^?5 S/cm to 2.12 × 10^?5 S/cm with the increase of the specific surface area. The polymer electrolytes exhibited good dimensional stability and electrochemical stability up to 4.4 V vs. Li⁺/Li. These results show that the PAMPSLi fiber‐based polymer electrolytes are promising materials for lithium‐ion batteries. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Fabrication of a novel polyhedral oligomeric silsesquioxanes/polyether‐block‐amide nano‐hybrid membrane for pervaporative separation of model fuel butanol

The present study reports the pervaporative separation capability of the pristine and polyhedral oligomeric silsesquioxanes (POSS) loaded hybrid polyether‐block ‐amide (PEBA) membranes for n ‐butanol recovery from the dilute n ‐butanol–water mixtures. It is the first study to produce POSS‐loaded PEBA membranes for n ‐butanol recovery. The morphology and crosslinking structure of the pristine and hybrid membrane were characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The thermal stability and crystallization behaviors of the pristine and hybrid membranes were investigated using thermogravimetric analysis and differential scanning calorimetry methods. Swelling experiments were also done to determine the affinity of the membranes to the n ‐butanol–water mixture. The effect of increasing amount of POSS on pervaporation performance was investigated in terms of flux and the n ‐butanol separation factor at 40 °C and a given n ‐butanol. All the hybrid membranes exhibited high flux and n ‐butanol separation factor than that of the pristine PEBA membrane. The best n ‐butanol separation factor of 27.2 was obtained accompanied with 1.33 Kg m^?2 h^?1 of flux, when the POSS amount was 4 wt %. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45211.     

Polydimethylsiloxane‐modified polyurethane–poly(ɛ‐caprolactone) nanofibrous membranes for waterproof,breathable applications

In this study, we prepared polydimethylsiloxane (PDMS)‐modified polyurethane–poly(?‐caprolactone) nanofibrous membranes with excellent waterproof, breathable performances via an electrospinning technique. Field emission scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and mechanical testing were used to characterize the morphologies and properties of the composite nanofibers. The fiber diameter and porous structure of the membranes were regulated by the adjustment of the temperatures of thermal treatment and the PDMS concentrations. The fibrous membranes obtained at a typical temperature of 70 °C possessed an optimized fibrous structure with a diameter of 514 ± 2 nm, a pore size of 0.55–0.65 µm, and a porosity of 77.7%. The resulting nanofibrous membranes modified with 5 wt % PDMS were endowed with good waterproof properties (water contact angle = 141 ± 1°, hydrostatic pressure = 73.6 kPa) and a high breathability (air permeability rate = 6.57 L m^?2 s^?1, water vapor transmission rate = 9.03 kg m^?2 day^?1). Meanwhile, the membranes exhibited robust mechanical properties with a high strength (breakage stress = 11.7 MPa) and excellent thermal stability. This suggests that they would be promising candidates for waterproof, breathable applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46360.     

Fabrication of Cross‐Linked Anion Exchange Membranes Using a Pillar[5]arene Bearing Multiple Alkyl Bromide Head Groups as Cross‐Linker

A pillararene‐based macrocycle with up to 10 flexible chains bearing alkyl bromide head groups is synthesized and investigated for the first time as a multiarm cross‐linker for tertiary‐amine functionalized polyethersulfone. Different from any previously reported cross‐linker, this has a unique pillar‐shaped structure and abundant reactive sites to form multifunctional clusters in the conductive domain. This advantage enables cross‐linking to occur smoothly at the membrane‐casting stage and endows the cross‐linked membranes with improved performance. The cross‐linked anion exchange membranes are found to possess high conductivities and excellent alkaline stability. With a controllable swelling ratio of 19.5%, the maximum conductivity of a membrane can reach 155 mS cm^–1 at 80 °C. Due to its local high‐density cross‐linked structure, a delay in degradation kinetics under alkaline condition can be observed, and the loss of conductivity is <10% after 400 h of alkaline stability test at 80 °C.     

Proton Conducting Membranes Based on Poly(2,2′‐imidazole‐5,5′‐bibenzimidazole)

Poly(2,2′‐imidazole‐5,5′‐bibenzimidazole) (PBI‐imi) was synthesized via the polycondensation between 3,3′,4,4′‐tetraaminobiphenyl and 4,5‐imidazole‐dicarboxylic acid. Effects of the reaction conditions on the intrinsic viscosity of the synthesized polymers were studied. The results show that the molecular weight of the polymers increases with increasing monomer concentration and reaction time, and then levels off. With higher reaction temperature, the molecular weight of the polymer is higher. With the additional imidazole group in the backbone, PBI‐imi shows improved phosphoric acid doping ability, as well as a little higher proton conductivity when compared with widely used poly[2,2′‐(m‐phenylene)‐5,5′‐bibenzimidazole] (PBI‐ph).Whereas, PBI‐imi and PBI‐ph have the similar chemical oxidation stability. PBI‐imi/3.0 H₃PO₄ composite membranes exhibit a proton conductivity as high as 10^–4 S cm^–1 at 150 °C under anhydrous condition. The temperature dependence of proton conductivity of acid doped PBI‐imi can be modeled by an Arrhenius equation.     

Imidazolium‐functionalized norbornene ionic liquid block copolymer and silica composite electrolyte membranes for lithium‐ion batteries

Imidazolium‐functionalized norbornene and benzene‐functionalized norbornene were synthesized and copolymerized via ring‐opening metathesis polymerization to afford a polymeric ionic liquid (PIL) block copolymers {5‐norbornene‐2‐methyl benzoate‐block ‐5‐norbornene‐2‐carboxylate‐1‐hexyl‐3‐methyl imidazolium bis[(trifluoromethyl)sulfonyl]amide [P(NPh‐b ‐NIm‐TFSI)]} with good thermal stability. On this basis, the solid electrolyte, P(NPh‐b ‐NIm‐TFSI)–lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), through blending with LiTFSI, and the nanosilica composite electrolyte, P(NPh‐b ‐NIm‐TFSI)–LiTFSI–SiO₂, through blending with LiTFSI and nanosilica, were prepared. The effects of the PILs and silica compositions on the properties, morphology, and ionic conductivity were investigated. The ionic conductivity was enhanced by an order of magnitude compared to that of polyelectrolytes with lower PIL compositions. In addition, the ionic conductivity of the nanosilica composite polyelectrolyte was obviously improved compared with that of the P(NPh‐b ‐NIm‐TFSI)–LiTFSI polyelectrolyte and increased progressively up to a maximum with increasing silica content when SiO₂ was 10 wt % or lower. The best conductivity of the P(NPh‐b ‐NIm‐TFSI)–20 wt % LiTFSI–10 wt % SiO₂ composite electrolyte with 7.7 × 10^?5 S/cm at 25 °C and 1.3 × 10^?3 S/cm at 100 °C were obtained, respectively. All of the polyelectrolytes exhibited suitable electrochemical stability windows. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44884.