Synthesis and thermal behavior of some anthracene‐based copolymers obtained by Diels–Alder cycloaddition reactions

New polymer structures have been synthesized via Diels–Alder cycloaddition of bisdiene compounds bearing two anthracene groups and different bisdienophiles, all containing bismaleimide or biscitraconimide functions. The monomers and polymers were characterized by FTIR, UV, and ¹H NMR techniques and compared with two models having a cycloadduct structure. The polymers were studied by thermogravimetric analyses. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis and characterization of heat‐resistant N‐phenylmaleimide–styrene–maleic anhydride copolymers and application in acrylonitrile–butadiene–styrene resin

The heat‐resistant copolymer of N‐phenylmaleimide (NPMI)–styrene (St)–maleic anhydride (MAH) was synthesized in xylene at 125°C with di‐tert‐butyl diperoxyterephthalate as an initiator. The characteristics of the copolymer were analyzed by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy (¹H‐NMR and ¹³C‐NMR), gel permeation chromatography, and elemental analysis. The ¹³C‐NMR results show that the copolymer possessed random sequence distribution; this was also supported by the differential scanning calorimetry experiment, in which a single glass‐transition temperature (T_g) of 202.3°C was observed. The thermal stability and degradation mechanism of the copolymer were investigated by thermogravimetric analysis. Using the Kissinger equation and Ozawa equation, we proved a nucleation controlling mechanism with an apparent activation energy of 144 kJ/mol. Blends of acrylonitrile–butadiene–styrene with the NPMI–St–MAH copolymer with various contents were prepared with a twin‐screw extruder processes. The mechanical and thermal properties of the materials, such as the tensile and flexural strength, T_g's, and Vicat softening temperatures, were all enhanced with the addition of the modifier, whereas the melt flow index decreased. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of tung oil–diacrylate copolymers via the Diels‐Alder reaction and properties of films from the copolymers

Copolymers were synthesized from tung oil and 1,6 hexanediol diacrylate or 1,4‐butanediol diacrylate via the Diels‐Alder reaction. The copolymers were completely soluble in common laboratory solvents, and had very broad molecular weight distributions. The residual double bonds in the copolymers were used to cure films by oxidative means. The films had good solvent resistance, good gloss, and a reasonable hardness–flexibility balance. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2369–2375, 2001     

Synthesis,thermal, and dynamic mechanical properties of 1,3‐bis(diphenylsilyl)‐2,2,4,4‐tetraphenylcyclodisilazane‐containing polydimethylsiloxanes

New and effective approaches to the synthesis of 1,3‐bis(diphenylsilyl)‐2,2,4,4‐tetraphenylcyclodisilazane‐containing polydimethylsiloxanes ( P1 and P2 ) were developed. P1 was obtained by polycondensation of cyclodisilazane lithium salt and chloroterminated polydimethylsiloxane. P2 was produced by hydrosilylation of vinyl‐terminated cyclodisilazane and hydrogen‐terminated polydimethylsiloxane. The polycondensation completed quickly at room temperature, while the hydrosilylation was facile and did not require cumbersome air‐sensitive operations. P1 and P2 were characterized by Fourier transform infrared, nuclear magnetic resonance, gel permeation chromatography, differential scanning calorimetry, thermogravimetric analysis (TGA), and isothermal gravimetric analysis (IGA). TGA revealed the outstanding thermal properties of P1 and P2 with 5% weight loss temperatures (T_d5) higher than 450°C. IGA proved their better thermal stability at 450°C for 800 min, compared to polydimethyldiphenylsiloxane. Dynamic mechanical analysis showed that silicone rubbers made from cyclodisilazane‐containing polydimethylsiloxanes could have a maximum tan δ value as high as 1.13 and had good prospects for damping material applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Shape memory crosslinked polyurethanes containing thermoreversible Diels‐Alder couplings

Crosslinked polyurethanes (PUs) containing irreversible (allophanate) and reversible Diels‐Alder chemical bonds were synthesized using various diisocyanates (methylene diphenyl diisocyanate MDI, 1,6‐hexamethylenediisocyanate HDI) and poly(?‐caprolactone) ((PCL) with different molecular weights (M_n = 10 kg/mol, 25 kg/mol, 50 kg/mol) as diol component. The melting/crystallization of PCL and the reversible DA bonds acted as temperature‐activated switches for shape memory performances, while allophanate network provided the permanent crosslinks for these PUs. The reversible DA bonds were obtained by the reaction of diisocyanate‐ended prepolymers with furfurylamine (FA) followed by the addition of bismaleimide (BMI). The permanent crosslinks between the linear chains containing DA bonds were achieved using additional amounts of diisocyanates (MDI or HDI). The above reaction path was supported by infrared spectroscopic results and swelling experiments. Tensile mechanical and shape memory properties in tension of the PUs were determined and discussed as a function of composition and crosslink densities deduced from swelling and dynamic mechanical analysis. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44145.     

Mechanical properties of conducting H‐type polysiloxane–polypyrrole graft copolymers and polytetrahydrofuran–polypyrrole block copolymers

The mechanical properties of block copolymers of polypyrrole and pyrrolyl‐ended azobis‐polytetrahydrofuran (TPPy) and graft copolymers of pyrrolyl‐ended H‐type polydimethylsiloxane (SPPy) were investigated and compared with those of polypyrrole (PPy). Conducting films were prepared electrochemically at a constant potential and doped with p‐toluene sulfonate. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1663–1666, 2002     

Design and synthesis of zero–zero‐birefringence polymers using N‐methylmaleimide

Zero–zero‐birefringence polymers which exhibit no orientational birefringence and no photoelastic birefringence may be suitable candidates for the components of optical devices. To develop zero–zero‐birefringence polymers, a novel copolymerization system is required. We investigated two types of birefringence of poly(N‐methylmaleimide) (PMeMI) and showed that PMeMI exhibits positive orientational and photoelastic birefringence. On the basis of the results, we calculated the optimal composition for compensating both types of birefringence by solving three equations which describe the relationship between birefringence properties and weight fraction of monomers. When the copolymer compositions were MMA/BzMA/MeMI = 86/8/6 and 88/8/4 (wt %), zero–zero‐birefringence polymers were obtained. By using MeMI as a comonomer, these zero–zero‐birefringence polymers have a much higher glass transition temperature (T_g) than those of previous researches. Also, this polymer film has high transparency comparable with that of PMMA film. Therefore, we conclude that we successfully prepared zero–zero‐birefringence polymers using N‐substituted maleimide and that N‐substituted maleimide is a promising material for zero–zero‐birefringence polymers for optical devices. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40423.     

Europium‐containing cholesteric liquid crystalline polymers in the side chain

Europium‐containing cholesteric liquid crystalline polymers were graft copolymerized using poly(methylhydrogeno)siloxane, cholesteryl 4‐(allyloxy)benzoate (M₁), cholesteryl acrylate (M₂), and a europium complexes monomer (M₃). The chemical structures of the monomers were characterized by Fourier transform infrared and ¹H‐nuclear magnetic resonance. The mesomorphic properties and phase behavior were investigated by differential scanning calorimetry, thermo gravimetric analysis, polarizing optical microscopy, and X‐ray diffraction. With an increase of europium complexes units in the polymers, the glass transition temperature (T_g) did not change significantly; the isotropic temperature (T_i) and mesophase temperature range (ΔT) decreased. All polymers showed typical cholesteric Grandjean textures, which was confirmed by X‐ray diffraction. The temperatures at which 5% weight loss occurred (T_d) were greater than 300°C for the polymers. The introduction of europium complexes units did not change the liquid crystalline state of polymer systems; on the contrary, the polymers were enabled with the significant luminescent properties. With Eu³⁺ ion contents ranging between 0 and 1.5 mol %, luminescent intensity of polymers gradually increased and luminescent lifetimes were longer than 0.45 ms for the polymers. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40866.     

Copolymerization of a bisanthracene compound with bismaleimides by Diels–Alder cycloaddition

Four new polymers have been synthesized via succesive Diels–Alder cycloadditions of a bisdiene compound bearing two anthracene groups and four bisdienophiles, all containing bismaleimide functions. The polycondensation reaction was performed in N,N‐dimethylacetamide at 120 °C leading to polymers soluble in polar solvents having molecular weights lower than 6000 g mol^?1. © 2001 Society of Chemical Industry     

Enhancement of the high‐temperature utility of a polystyrene‐b‐poly(ethylene‐co‐butylene)‐b‐polystyrene block copolymer by friedel–crafts naphthoylation

A procedure was developed for the Friedel–Crafts naphthoylation of the polystyrene segments of a polystyrene‐b‐poly(ethylene‐co‐butene)‐b‐polystyrene (SEBS) triblock copolymer. It was possible to obtain up to 72% 1‐naphthoylation or 100% 2‐naphthoylation of the polystyrene segments in the copolymer. Naphthoylation could also be accomplished using trifluoromethanesulfonic acid as a catalyst. The naphthoylated products were characterized by ¹H‐NMR spectroscopy, size‐exclusion chromatography, and dynamic mechanical thermal analysis. The mechanical properties of the original and naphthoylated polymers were measured from 25 to 125°C. The results obtained indicate that naphthoylation enhances the tensile properties of the polymers at elevated temperatures. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1289–1295, 2003     

Nucleating agent‐containing P(LLA‐mb‐BSA) multi‐block copolymers with balanced mechanical properties

In order to obtain high performance bioplastics and thermoplastic elastomers, P(LLA‐mb‐BSA) multi‐block copolymers containing 30 wt % and 70 wt % soft segment (PLBSA30 and PLBSA70 for short) were synthesized via chain extension and coupling of poly(L‐lactic acid) (PLLA) and poly(butylene succinate‐co‐adipate) (PBSA) prepolymers in the presence of 1% nucleating agent (NA). They were characterized with proton nuclear magnetic resonance (¹H NMR), gel permeation chromatography (GPC), differential scanning calorimetry (DSC), polarizing optical microscopy (POM), thermal gravimetric analysis (TGA), transmission electron microscope (TEM), and tensile and impact test. The relatively high molecular weights of (M_n 8200 g/mol and 3100 g/mol for PLLA and PBSA, respectively) the polyester sequences are helpful to improve the PLLA crystallization and the flexibility of the PBSA soft segment. Nucleation effect further accelerates the crystallization of PLLA segment. The synergistic effect of these factors results in good balance between stiffness and toughness. PLBSA30s containing 1% zinc citrate (ZnCC) or talc behave as ultra‐tough bioplastics with ultrahigh impact strength over 50 kJ/m² and excellent tensile properties. PLBSA70 containing 1% ZnCC possesses elongation at break of 600% and retains high modulus (56 MPa) and strength (16 MPa) and therefore behaves as an excellent thermoplastic elastomer. The excellent and balanced properties would extend the end applications of these PLLA‐based materials. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44777.     

Improving low‐density polyethylene/poly(ethylene terephthalate) blends with graft copolymers

Blends of low‐density polyethylene (LDPE) and poly(ethylene terephthalate) (PET) were prepared with different weight compositions with a plasticorder at 240°C at a rotor speed of 64 rpm for 10 min. The physicomechanical properties of the prepared blends were investigated with special reference to the effects of the blend ratio. Graft copolymers, that is, LDPE‐grafted acrylic acid and LDPE‐grafted acrylonitrile, were prepared with γ‐irradiation. The copolymers were melt‐mixed in various contents (i.e., 3, 5, 7, and 9 phr) with a LDPE/PET blend with a weight ratio of 75/25 and used as compatibilizers. The effect of the compatibilizer contents on the physicomechanical properties and equilibrium swelling of the binary blend was investigated. With an increase in the compatibilizer content up to 7 phr, the blend showed an improvement in the physicomechanical properties and reduced equilibrium swelling in comparison with the uncompatibilized one. The addition of a compatibilizer beyond 7 phr did not improve the blend properties any further. The efficiency of the compatibilizers (7 phr) was also evaluated by studies of the phase morphology (scanning electron microscopy) and thermal properties (differential scanning calorimetry and thermogravimetric analysis). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Enhancement of Mechanical and Self‐Healing Performance in Multiwall Carbon Nanotube/Rubber Composites via Diels–Alder Bonding

Mechanically robust and self‐healing rubbers are highly desired to satisfy the increasing demand of high‐performance smart tires and related materials. Herein, a self‐healing rubber nanocomposite with enhanced mechanical and self‐healing performance based on Diels–Alder chemistry has been investigated. The furfuryl grafted styrene‐butadiene rubber and furfuryl terminated MWCNT (MWCNT‐FA) are reacted with bifunctional maleimide to form a covalently bonded and reversibly cross‐linked rubber composite. Obvious reinforcing effect is obtained at high cross‐linking density. Over 200–300% increase in the Young's modulus and toughness can be achieved in the rubber nanocomposites with 5 wt% MWCNT‐FA. Meanwhile, the healing efficiency increased with MWCNT‐FA content. MWCNT‐FA plays dual roles of effective reinforcer and a kind of healant.

     

Thermal and mechanical properties of the polymers synthesized by the sequential polymerization of propylene and 1‐hexadecene

The block copolymer of poly(1‐hexadecene) (PHD) and polypropylene (PP) was effectively synthesized by the sequential polymerization of propylene and 1‐hexadecene by using highly isospecific TiCl₃/Cp₂Ti(CH₃)₂ (Cp = cyclopentadienyl). The block copolymers had two separate melting temperatures of constituent blocks. The modulus of PHD–PP block copolymer was enhanced as the content of sequentially polymerized PP block was increased. The elongation at break showed positive deviation at the intermediate compositions from the simple additive values of constituent homopolymers. Shape memory effect which utilizes the crystalline PHD block as a reversible phase and the crystalline PP block as a fixed structure was examined. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1709–1715, 2002; DOI 10.1002/app.10551     

Compatibilized blends of PVC/PA12 and PVC/PP containing poly(lauryl lactam‐block‐caprolactone)

Specially designed block copolymers have played a role as compatibilizing agents in the system of immiscible polymer blends. We applied lauryl lactam (LA)–caprolactone (CL) block copolymer [P(LA‐b‐CL)] as a compatibilizing agent for immiscible poly(vinyl chloride) (PVC) blends with various polymers. These blends possess high thermal performance and toughness. We investigated the effect of P(LA‐b‐CL) as a compatibilizing agent for immiscible PVC blends with poly(ω‐lauryl lactam) [polyamide 12 (PA12)]. We also described the invention of a new compatibilizing agent system involving P(LA‐b‐CL) for PVC/polypropylene (PP) blends. The mechanical and thermal properties of (1) PVC/PA12 blend compatibilized with P(LA‐b‐CL) and (2) PVC/PP blend compatibilized with P(LA‐b‐CL)/PA12/maleic anhydride–modified PP were both enhanced. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1983‐1992, 2004     

Polyethersulfone/polyetherethersulfone copolymers with the same chemical composition and different melt‐viscosity

Random, block, and alternative polyethersulfone/polyetherethersulfone copolymers (phenyl: ether: sulfone =7 : 4 : 3) with similar molecular weights and polydispersity were synthesized using different synthetic strategies. DSC and DMA analyses indicated that all copolymers are amorphous and possess extremely close glass transition temperature. The random copolymer displayed higher modulus and complex viscosity. It is interesting to find that the alternative copolymer exhibited a melt viscosity of 281 Pa s, which is much lower than that of the block copolymer (646 Pa s) and the random copolymer (1641 Pa s) at 4 s^?1. Moreover, the alternative copolymer showed obviously higher elongation at break of 101.9%. These behaviors were highly related to their different sequence distribution. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40149.     

Segmented organosiloxane copolymers: 2 Thermal and mechanical properties of siloxane—urea copolymers

The structure-property behaviour of new siloxane-urea containing segmented copolymers has been investigated. Amino-propyl terminated poly(dimethylsiloxane) oligomers of from 900–3660 M_n were reacted with various diisocynates to form segmented copolymers with urea linkages. The length of the hard segments in these copolymers corresponds approximately to the length of the diisocynate unit employed. A number of mechanical and thermal properties were investigated for these phase separated materials. It was found that the performance of these copolymers was effected by varying the hard segment type and/or content and that high strength necessitates a microphase texture. The two phase nature of these copolymers was verified by dynamic mechanical, thermal and SAXS studies. The phase separation was found to occur in these copolymers even with 6% hard segment by weight. In conclusion, these materials displayed a behaviour similar to the segmented polyurethanes and were found to be superior to the unfilled silicone elastomers.     

Side‐chain free aromatic polyimides containing anthracene units via Diels‐Alder precursors

Side‐chain free aromatic polyimides are expected to possess extraordinary mechanical properties and stability because of strong primary and secondary bonding forces. However, their low solubility makes it difficult to characterize, process, and obtain high molecular weight polymers. We have prepared highly stable thin films of side‐chain free aromatic polyimides from soluble Diels–Alder (DA) precursors. Heating the films of the precursors above 215°C induced retro‐DA reaction, which converted the precursors to the fully aromatic polyimides. The solid‐state retro‐DA reactions were monitored by attenuated total reflection Fourier transformed infrared (ATR‐FTIR) and UV‐Vis spectrometry. A critical issue for utilizing precursor chemistry in polymer synthesis is that it may result in porous and/or deformed materials. In this work, profilometry and atomic force microscope (AFM) were applied to study the surface and volume change. Our results showed that smooth and pin‐hole free films were obtained after the thermal treatment, while the volume decreased with a percentage close to the weight loss caused by the retro‐DA reaction. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Phosphorus‐containing poly(ester‐imide)–polydimethylsiloxane copolymers

New phosphorus‐containing poly(ester‐imide)‐polydimethylsiloxane copolymers were prepared by solution polycondensation of 1,4‐[2‐(6‐oxido‐6H‐dibenz < c,e > < 1, 2 > oxaphosphorin‐6‐yl)]naphthalene‐bis(trimellitate) dianhydride with a mixture of an aromatic diamine (1,3‐bis(4‐aminophenoxy)benzene) and α,ω‐bis(3‐aminopropyl)oligodimethylsiloxane of controlled molecular weight, in various ratios. Poly(amic acid) intermediates were converted quantitatively to the corresponding polyimide structures using a solution imidization procedure. The polymers are easily soluble in polar organic solvents, such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylformamide, as well as in less polar solvents such as tetrahydrofuran. They show good thermal stability, the decomposition temperature being above 370 °C. The glass transition temperatures are in the range 165–216 °C. Solutions of the polymers in N‐methyl‐2‐pyrrolidone exhibit photoluminescence in the blue region. Copyright © 2010 Society of Chemical Industry     

Effect of glass transition temperature on heat‐responsive gas bubbles formation from polymers containing tert‐butoxycarbonyl moiety

Various types of polymers containing tert‐butoxycarbonyl (BOC) moiety as the typical protecting group of functional moieties have been used for the design of stimuli‐responsive polymer materials. In this study, we investigated the heat‐responsive deprotection behavior of BOC‐containing polymers obtained by radical polymerization of 4‐(tert‐butoxycarbonyloxy)styrene (BSt) and copolymerizations of BSt with styrene and methyl acrylate. The deprotection of BOC groups accompanying the evolution of isobutene and carbon dioxide as gaseous products was monitored by thermogravimetric analyses at different temperature circumstances; that is, on heating at a rate of 10 °C/min and under isothermal conditions at various temperatures. The deprotection resulted in a significant decrease in the transmittance of visible light due to the formation of a large number of gas bubbles, that is, foaming, in the polymer films when a heating temperature was close to the glass transition temperature of the used polymer. The potential of BOC‐containing polymers was also evaluated as the heat‐responsive adhesive polymers for dismantlable adhesion. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46252.