New apatite-type phosphor Ca9La(PO4)5(SiO4)F2:Tb3+,Dy3+ with improved color rendering index

Ca₉La(PO₄)₅(SiO₄)F₂:Tb³⁺,Dy³⁺ (CLPSF:Tb³⁺,Dy³⁺) phosphors were successfully prepared using the traditional solid-state technique. The crystal structure was refined and the luminescence properties have been examined in detail. The band gap and electronic structure of Ca₉La(PO₄)₅(SiO₄)F₂ were performed by the periodic density functional theory (DFT) calculation. The spectral and fluorescence decay dynamics of CLPSF:Tb³⁺,Dy³⁺ show that the energy transfer behavior between Tb³⁺ and Dy³⁺ ions is observed. The CLPSF:Tb³⁺,Dy³⁺ phosphors can be efficiently excitable at the wavelengths range from 300 to 500 nm. The emission spectrum covers the whole visible part of the spectra with the sharp emission bands in red, green, and blue regions. The correlated color temperature (CCT) and color rendering index (CRI) of white light emission could be improved by the fine-tuning of the Tb³⁺ and Dy³⁺ ions ration in accordance with the energy transfer behavior. Thus, the CLPSF:Tb³⁺,Dy³⁺ phosphor could be used as a material for the near-ultraviolet (n-UV) and white light-emitting diodes (w-LEDs).     

Synthesis and photoluminescence performance of single-component Ca3YAl3B4O15:Dy3+, Eu3+ white-emitting phosphor for white light-emitting diodes

A single-component Ca₃YAl₃B₄O₁₅ (CYAB):Dy³⁺, Eu³⁺ phosphor was synthesized by the traditional high temperature solid-phase method, Dy³⁺ and Eu³⁺ were codoped in the structure to obtain a warm white emission. The results of XRD and EDS revealed that all samples had the standard Ca₃YAl₃B₄O₁₅ structure, and no impurity phase appeared with codoping. The emission of Dy³⁺ in CYAB consisted of both main peaks at 476 nm and 570 nm, with which a white emission could be observed. Furthermore, a characteristic emission peak of Eu³⁺ appeared at 617 nm in Dy³⁺/Eu³⁺-codoped samples to supplement red component for the white emission of Dy³⁺, due to the energy transfer effect between Dy³⁺ and Eu³⁺. With the amount of Eu³⁺ raised, the correlated colour temperature of CYAB:Dy³⁺, Eu³⁺ phosphor obviously decreased, and a warm white light was successfully realized from the manufactured w-LEDs. Therefore, all results indicated that the single-component Dy³⁺/Eu³⁺ codoped CYAB white-emitting phosphor had a potential application in ultraviolet excited w-LEDs.     

Crystal structure,luminescent properties and white light emitting diode application of Ba3GdNa(PO4)3F:Eu2+ single-phase white light-emitting phosphor

A series of single-phase white-light-emitting phosphors, Eu²⁺-activated Ba₃GdNa(PO₄)₃F phosphors were synthesized by solid-state reactions. The crystal structure of Ba₃GdNa(PO₄)₃F was been identified by Rietveld refinement of X-ray diffraction pattern. The Eu²⁺-activated Ba₃GdNa(PO₄)₃F phosphors exhibit broad excitation spectra from 250 to 420 nm, which matched well with the n-UV LED chips. Under the excitation of 365 nm, the emission spectrum almost covered the entire visible region including two emission bands peaked at 472 nm and 640 nm. Three different Eu²⁺ emission centers in Ba₃GdNa(PO₄)₃F:Eu²⁺ phosphor were confirmed by their fluorescence decay lifetimes. The optimal concentration of Eu²⁺ in Ba₃GdNa(PO₄)₃F:xEu²⁺ was 3 mol% and the corresponding concentration quenching mechanism was verified to be exchange coupling interaction. Furthermore, the white light-emitting diode fabricated with Ba₃GdNa(PO₄)₃F:0.05Eu²⁺ phosphor and a 370 nm UV chip has a CIE of (0.3267, 0.2976) with a color-rendering index of 78.4 at the CCT of 5287 K.     

White light emitting thermally stable bismuth phosphate phosphor Ca3Bi(PO4)3:Dy3+ for solid-state lighting applications

White light emitting dysprosium-doped Ca₃Bi(PO₄)₃ phosphor was successfully synthesized via co-precipitation method for the first time and the structural, vibrational, morphological, and luminescent properties have been investigated for solid-state lighting applications. X-ray diffraction (XRD) and structural refinement studies reveal that the synthesized phosphors consist of single phase with cubic structure. The field emission scanning electron microscopy (FE-SEM) images reveal that the as-synthesized phosphor has micron size particle with an irregular shape. Under near-ultraviolet (n-UV) and blue excitation, the phosphor exhibits white light emission via a combination of blue (~484 nm) and yellow (~575 nm) emission bands. The optimized concentration of Dy³⁺ ions is 6.0 mol % after which the concentration quenching takes place. The process of energy transfer between Dy³⁺ ions is due to dipole-dipole interaction, which was confirmed by applying Dexter's theory. The CIE chromaticity coordinates for the optimized phosphor were (0.329, 0.377), and they lie in the white light region. The emission intensity remains to be 83.41% at 373 K to that of at room temperature, which indicates good thermal stability. The above mentioned results demonstrate that Ca₃Bi(PO₄)₃ is a potential phosphor for solid-state lighting applications.     

Synthesis,energy transfer mechanism,and tunable emissions of novel Na3La(VO4)2:Re3+ (Re3+ = Dy3+, Eu3+, and Sm3+) vanadate phosphors for near-UV-excited white LEDs

In this study, novel Eu³⁺-, Dy³⁺-, and Sm³⁺-activated Na₃La(VO₄)₂ phosphors were synthesized using a solid state reaction method. X-ray diffraction analysis results indicated that the Na₃La(VO₄)₂ phosphors had an orthorhombic crystal structure with the Pbc21 space group. There were two different La(1)O₈ and La(2)O₈ polyhedra with high asymmetry in the crystal structure. Scanning electron microscopy revealed that the product had a sheet morphology with an irregular particle size. Further, the luminescence properties, including the excitation and emission spectra, and luminescence decay curve, were investigated using a fluorescence spectrometer. The results showed that the Na₃La(VO₄)₂ compound was an excellent host for activating the luminescence of Eu³⁺ (614 nm), Dy³⁺ (575 nm), and Sm³⁺ (647 nm) ions. Further, Dy³⁺/Eu³⁺ co-doped Na₃La(VO₄)₂ phosphors were exploited, and the energy transfer from Dy³⁺ to Eu³⁺ was demonstrated in detail by the photoluminescence excitation, photoluminescence spectra, and luminescent decay curves. The results showed that the energy transfer efficiency from Dy³⁺ to Eu³⁺ was highly efficient, and the energy transfer mechanism was dipole–dipole interactions. Finally, tunable emissions from the yellow region of CIE (0.3925, 0.4243) to the red region of CIE (0.6345, 0.3354) could be realized by rationally controlling the Dy³⁺/Eu³⁺ concentration ratio. These phosphors may be promising materials for the development of solid-state lighting and display systems.     

Cyan-emitting Ba0.45Ca2.5La6(SiO4)6: 0.05 Eu2+ and Ba1.45Ca1.5La6(SiO4)6:0.05 Eu2+ solid-solution phosphors for white light-emitting diodes

Two cyan-emitting phosphors with different bandwidths were successfully synthesized through the high-temperature solid-state method in a reducing atmosphere. The crystal structures, morphologies, and luminescence properties of the as-prepared phosphors were investigated. The Rietveld refinements of the powder X-ray diffraction (XRD) data demonstrated the single phase of the samples, and two crystallographic sites of La³⁺ were observed in the crystal structure. Under the excitation of UV light, both Ba_0.45Ca_2.5La₆(SiO₄)₆: 0.05 Eu²⁺ and Ba_1.45Ca_1.5La₆(SiO₄)₆: 0.05 Eu²⁺ phosphors emitted cyan light due to the 4f⁶5 d¹→4f⁷ transitions of the Eu²⁺ ion. The emission spectra could be well fitted by two component Gaussian peaks corresponding to two different coordination environments of the Eu²⁺ ions. The temperature-dependent photoluminescence spectra show a large difference on the thermal stability between the two phosphors. The two phosphors exhibit effective absorption of near-UV light and their internal quantum efficiencies (IQEs) were calculated as 31.5% and 42.4% under 295 nm UV-light excitation. The experimental results indicate that the novel cyan phosphors might have potential applications in white light-emitting diodes (LEDs) based on the near-UV LED chip.     

Mn4+-related photoemission enhancement via energy transfer in La2MgGeO6:Dy3+, Mn4+ phosphor for plant growth light-emitting diodes

A double perovskite-type substrate of La₂MgGeO₆ (LMGO) was successfully synthesized via a high-temperature solid-state reaction method and was codoped with Mn⁴⁺ and Dy³⁺ to form a new deep-red phosphor (LMGO:Mn⁴⁺,Dy³⁺) for artificial plant growth light-emitting diodes (LEDs). This extraordinary phosphor can exhibit strong far-red emission with a maximum peak at 708 nm between 650 and 750 nm, which can be ascribed to the ²E_g → ²A_2 g spin-forbidden transition of Mn⁴⁺. The X-ray diffraction (XRD) patterns and high-resolution transmission electron microscopy (HRTEM) clarified that the La³⁺ sites in the host were partly replaced by Dy³⁺ ions. Moreover, we discovered energy transfers from Dy³⁺ to Mn⁴⁺ by directly observing the significant overlap of the excitation spectrum of Mn⁴⁺ and the emission spectrum of Dy³⁺ as well as the systematic relative decline and growth of the emission bands of Dy³⁺ and Mn⁴⁺, respectively. With the increase in the activator (Mn⁴⁺) concentration, the relationship between the luminescence decay time and the energy transfer efficiency of the sensitizer (Dy³⁺) was studied in detail. Finally, an LED device was fabricated using a 460 nm blue chip, and the as-obtained far-red emitting LMGO:Mn⁴⁺,Dy³⁺ phosphors for Wedelia chinensis cultivation. As expected, the as-fabricated plant growth LED-treated Wedelia chinensis cultured in the artificial climate box with overhead LEDs demonstrated that after 28 days of irradiation, the average plant growth rate and the total chlorophyll content were better than those of specimens cultured using the commercial R-B LED lamps, indicating that the as-prepared phosphor could have a potential application in the agricultural industry.     

Photoluminescence and energy transfer of efficient and thermally stable white-emitting Ca9La(PO4)7:Ce3+, Tb3+, Mn2+ phosphors

The development of novel single-component white-emitting phosphors with high thermal stability is essential for improving the illumination quality of white light-emitting diodes. In this work, we synthesized a series of Ce³⁺, Tb³⁺, Mn²⁺ single- and multiple-doped Ca₉La(PO₄)₇ (CLPO) phosphors with β-Ca₃(PO₄)₂-type structure by the simple high-temperature solid-state reaction. The crystallization behavior, crystal structure, surface morphology, photoluminescence performance, decay lifetime and thermal stability were systematically investigated. The PL spectra and decay curves have evidenced the efficient energy transfer from Ce³⁺ to Tb³⁺ and from Ce³⁺ to Mn²⁺ in the CLPO host, and corresponding energy transfer efficiency reaches 41.8% and 54.1%, respectively. The energy transfer process of Ce³⁺→Tb³⁺ and Ce³⁺→Mn²⁺ can be deduced to the resonant type via dipole-dipole and dipole-quadrupole interaction mechanism, and corresponding critical distance were determined to be 12.23 and 14.4 Å, respectively. Based on the efficient energy transfer, the white light emission can be successfully achieved in the single-component CLPO:0.15Ce³⁺, 0.10Tb³⁺, 0.04Mn²⁺ phosphor, which owns CIE chromaticity coordinates of (0.3245, 0.3347), CCT of 5878 K, internal and external quantum efficiency of 84.51% and 69.32%. Especially, compared with the emission intensity at 25 °C, it still remains 98.5% at 150 °C and 92.0% at 300 °C. Based on these results, the single-component white light emission phosphor CLPO:0.15Ce³⁺, 0.10Tb³⁺, 0.04Mn²⁺ is a potential candidate for UV-converted white LEDs.     

Tunable emission of single-phased NaY(WO4)2:Sm3+ phosphor based on energy transfer

A series of NaY(WO₄)₂:Sm³⁺ phosphors were prepared by high temperature solid state reaction. When excited by ultraviolet and blue light, their emission spectra cover entirely visible light region, due to intrinsic luminescence of WO₄^2- group as well as Sm³⁺ 4f-4f transitions. White light emission was obtained from NaY_0.99Sm_0.01(WO₄)₂ phosphor under radiation of 265 nm UV light, and intense yellow and red emission from ⁶H_{J(J=5/2, 7/2, 9/2)} transitions were observed when pumped Sm^{3+ 4}G_5/2 by 405 nm blue light. With incorporation of Sm³⁺ into NaY(WO₄)₂ host, higher-level emission from Sm³⁺ at 650 nm was generated by energy transfer from WO₄^2- to Sm³⁺ under excitation of 265 nm. The corresponding energy transfer mechanism was demonstrated to be a dipole-dipole interaction. In addition, tunable emission from blue to white and, finally, to red was realized by increasing Sm³⁺ doping concentration. The band gap of NaY(WO₄)₂ calculated from diffuse reflection spectra indicates a semiconducting character. All these results show that NaY_1−xSm_x(WO₄)₂ phosphor provides promising application for conversion of frequencies emitted by UV or blue LEDs.     

White light emission from novel host-sensitized single-phase Y2WO6: Ln3+ (Ln3+=Eu3+, Dy3+) phosphors

A series of Eu³⁺- or Dy³⁺-doped and Eu³⁺/Dy³⁺ co-doped Y₂WO₆ in pure phase was synthesized via high-temperature solid-state reaction. X-ray diffraction, diffuse reflection spectra, photoluminescence excitation and emission spectra, the CIE chromaticity coordinates and temperature-dependent emission spectra were exploited to investigate the phosphors. Upon UV excitation at 310 nm, efficient energy transfer from the host Y₂WO₆ to dopant ions in Eu³⁺ or Dy³⁺ single-doped samples was demonstrated and those phosphors were suitable for the UV LED excitation. The intense red emission was observed in Y₂WO₆: Eu³⁺, and blue and yellow ones were observed in Y₂WO₆: Dy³⁺. Concentration quenching in Y₂WO₆: Dy³⁺ phosphors could be attributed to the electric dipole-dipole interaction. In Eu³⁺/Dy³⁺ co-doped Y₂WO₆ phosphors energy transfer process only took place from the host to Eu³⁺/Dy³⁺ ions and warm white-light emission can be obtained by adjusting the dopant concentrations. The temperature-dependent luminescence indicated Eu³⁺/Dy³⁺ co-doped Y₂WO₆ was thermally stable. Our overall results suggested that Y₂WO₆: Ln³⁺ (Ln³⁺=Eu³⁺, Dy³⁺) as warm white-light emitting host-sensitized phosphor might be potentially applied in WLEDs.     

Sr3GdLi(PO4)3F:Eu2+, Mn2+: A tunable blue-white color emitting phosphor via energy transfer for near-UV white LEDs

A series of Eu²⁺ and Mn²⁺ co-doping Sr₃GdLi(PO₄)₃F phosphors have been synthesized through high temperature solid state reaction. Eu²⁺ single doped Sr₃GdLi(PO₄)₃F phosphors have an efficient excitation in the range of 230–430 nm, which is in good agreement with the commercial near-ultraviolet (n-UV) LED chips, and gives intense blue emission centering at 445 nm. The critical distance of the Eu²⁺ ions in Sr₃GdLi(PO₄)₃F is computed and demonstrated that the concentration quenching mechanism of Eu²⁺ is mostly caused by the dipole-dipole interaction. By co-doping Eu²⁺ and Mn²⁺ ions in the Sr₃GdLi(PO₄)₃F host, the energy transfer from Eu²⁺ to Mn²⁺ that can be discovered. With the increase of Mn²⁺ content, emission color can be adjusted from blue to white under excitation of 380 nm, corresponding to chromatic coordinates change from (0.189, 0.108) to (0.319, 0.277). The energy transfer from Eu²⁺ to Mn²⁺ ions is proven to be a dipole-dipole mechanism on the basis of the experimental results and analysis of photoluminescence spectra and decay curves. This study infers that the obtained Sr₃GdLi(PO₄)₃F:Eu²⁺, Mn²⁺ phosphors may be a potential candidate for n-UV LEDs.     

A low cost and high efficient Ba9(Lu2-x-yAlx)Si6O24:yCe3+ cyan-emitting phosphor

White LEDs constructed by near-ultraviolet chips and red/green/blue/cyan-emitting phosphors are an important route for healthy lighting. However, efficient cyan-emitting phosphors are quite scarcity. The cyan-emitting phosphor Ba₉Lu_1.5Al_0.5Si₆O₂₄:Ce³⁺ (BLASO:Ce³⁺) was reported for the first time. Under 400 nm excitation, BLASO:Ce³⁺ shows a emission peak at 488 nm with an FWHM of about 117 nm. At room temperature, the internal quantum efficiency (IQE) can reach as high as 90.8%. At 150 °C, the IQE decreases to 81.5%, indicating an excellent thermal stability. The effect of the Al substitution for Lu on crystal structures and photoluminescence were investigated. The homogeneity of the luminescence was diagnosed by viewing microscopic particles based on the scanning electron microscope (SEM) equipped a cathodoluminescence (CL) system.     

Photoluminescence and electron-beam excitation induced cathodoluminescence properties of novel green-emitting Ba4La6O(SiO4)6:Tb3+phosphors

Tb³⁺ions activated Ba₄La₆O(SiO₄)₆ (BLSO:Tb³⁺) phosphors were synthesized by a citrate sol-gel method. The X-ray diffraction pattern confirmed their oxyapatite structure. The field-emission scanning electron microscope image established that the BLSO:Tb³⁺phosphor particles were closely-packed and acquired irregular shapes. The photoluminescence (PL) excitation spectra of BLSO:Tb³⁺phosphors showed intense f–d transitions along with low intense peaks corresponding to the f–f transitions of Tb³⁺ions in the lower energy region. The PL emission spectra displayed the characteristic emission bands of Tb³⁺ions, and the optimized concentrations were found to be at 1 and 6 mol% for blue and green emission peaks, respectively. The cathodoluminescece (CL) spectra exhibited a similar behavior that was observed in the PL spectra except the intensity variations in the blue and green regions. The CL spectra of the BLSO:6 mol% Tb³⁺phosphor unveiled accelerating voltage induced luminescent properties.     

X-ray photoelectron spectroscopy and optical analysis of pure white light emitting Dy3+ and Mn2+ codoped Na3Y(PO4)2 phosphors for solid-state lighting

A single-phase and optimized pure white light emitting Dy³⁺-doped and Dy³⁺/Mn²⁺ codoped Na₃Y(PO₄)₂ phosphors (NYPO) were synthesized by traditional solid state reaction process. The as-synthesized phosphors were characterized by X-ray diffraction, X-ray photoelectron spectroscopy (XPS), diffuse reflectance spectra and photoluminescence studies. The results suggested that the NYPO: Dy, Mn phosphors were crystallized in orthorhombic structures. The presence of dopants Dy and Mn was quantified by XPS analysis. All of the phosphors were effectively excited using a light of wavelength 351?nm and emissions in two regions, blue (~482?nm, ⁴F_9/2→⁶H_15/2) and yellow (~573?nm, ⁴F_9/2→⁶H_13/2), were obtained due to the f-f transitions of Dy³⁺ ions. The maximum intensities of Dy and Mn obtained were 0.07 and 0.05 for NYPO:Dy and NYPO:0.07Dy, Mn, respectively. The chromaticity coordinates, color temperatures, and color rendering indices of NYPO: 0.07Dy ((0.32, 0.33), 6194?K, and 48) and NYPO:0.07Dy, 0.05Mn phosphors ((0.33, 0.33), 5688?K, and 62) were determined. The energy transfer mechanism and oxygen vacancies that arise due to the introduction of Mn²⁺ ions in the NYPO:Dy phosphors, are responsible for the tuning of cool white light to pure day white light. The introduction of Mn in the Dy doped NYPO phosphor enhances the emission intensity in the phosphor.     

Site-selective occupation and luminescence property investigation of Ca18Na3Y(PO4)14:Eu2+ phosphor for full-spectrum LED

Cyan-emitting phosphors have attracted widespread attention as an integral part to realize full-spectrum lighting. Understanding the site occupation of luminescence centers is of great importance to design and clarify the luminescent mechanism for new cyan-emitting phosphors. Here, we report a cyan-emitting phosphor Ca₁₈Na₃Y(PO₄)₁₄:Eu²⁺ synthesized by the high-temperature solid-state method. The crystal structure is characterized by X-ray diffraction and refined by the Rietveld method. The diffuse reflectance spectra, excitation/emission spectra, fluorescence decay curves, thermal stability, and related mechanism are systematically studied. The results show that Ca₁₈Na₃Y(PO₄)₁₄:Eu²⁺ crystallizes in a trigonal crystal system with space group R3c. Under excitation at 350 nm, a broadband cyan emission can be obtained at 500 nm with a half-width of about 120 nm, which is caused by Eu²⁺ occupying five different sites in host, namely, Na2O₁₂ (450 nm), (Ca3/Na1)O₈ (485 nm), Ca2O₈ (515 nm), Ca1O₇ (565 nm), and (Ca4/Y)O₆ (640 nm), respectively. Moreover, crystal structure, room and low temperature spectroscopy, and luminescence decay time are used to skillfully verify the site-selective occupation of Eu²⁺. Finally, a full-spectrum light-emitting diode (LED) lamp is fabricated with an improved color rendering index (∼90.3), CCT (∼5492 K), and CIE coordinates (0.332, 0.318). The results show that Ca₁₈Na₃Y(PO₄)₁₄:Eu²⁺ has the potential to act as a cyan emission phosphor for full-spectrum white LEDs.     

Photoluminescence properties of NUV light excited Ba(Mg1/3Nb2/3)O3:Eu3+ red phosphor with high color purity

In this work, a new red phosphor with high color purity, Eu³⁺ ions doped Ba(Mg_1/3Nb_2/3)O₃ phosphor has been prepared by wet chemical method. The structure analysis suggests BMN:x%Eu phosphors have a hexagonal phase and Ba²⁺ ions are replaced by Eu³⁺ ions in BMN. Upon excitation of NUV light, the BMN:x%Eu phosphors emit strong red light around 615?nm, derived from the ⁵D₀-⁷F₂ transition of Eu³⁺ ions. The relationship between luminescent properties and structure of BMN:x%Eu was discussed. The Judd-Ofelt intensity parameters (Ω₂, Ω₄) were calculated to analyze the asymmetry of the Eu³⁺ ions site occupancy further, and the quantum efficiency of BMN:3%Eu was found to be 77.26%. In addition, the decay curve indicates the decay time(τ) of BMN:3%Eu is determined to be 1.34?ms and Eu³⁺ ions occupy only one type of site. The CIE chromaticity coordinate (0.656,0.344) of BMN:3%Eu is quite close to the red phosphors standard value (0.670, 0.330), which indicates BMN:x%Eu can be a suitable red phosphor used in NUV-based white LEDs.     

Rare-earth-free Li5La3Ta2O12:Mn4+ deep-red-emitting phosphor: Synthesis and photoluminescence properties

Li₅La₃Ta₂O₁₂:Mn⁴⁺ (LLTO:Mn⁴⁺) phosphors are prepared in air via high-temperature solid-state method and investigated for their crystal structures and luminescence properties. LLTO:Mn⁴⁺ phosphor under excitation at 314 nm shows deep-red emission peaking at 714 nm due to the ²E→⁴A₂ transition of Mn⁴⁺ ion. The excitation bands in the range 220 - 570 nm are attributed to the Mn⁴⁺ - O^2- charge-transfer band and the ⁴A_2g→⁴T_1g, ²T_2g, and ⁴T_2g transitions of Mn⁴⁺, respectively. The optimal Mn⁴⁺ ion concentration is ~0.4 mol%. The concentration quenching mechanism in LLTO:Mn⁴⁺ phosphor is electric dipole-dipole interaction. The luminous mechanism and temperature quenching phenomenon are explained by the Tanabe-Sugano energy level diagram and the configurational coordinate diagram of Mn⁴⁺ in the octahedron, respectively. The experimental results indicate that LLTO:Mn⁴⁺ phosphor has a potential application prospect as candidate of deep-red component in light-emitting diode (LED) lighting.     

High luminescent brightness and thermal stability of red emitting Li3Ba2Y3(WO4)8:Eu3+ phosphor

A series of Li₃Ba₂Y_3−x(WO₄)₈:xEu³⁺ (x=0.1, 1, 1.5, 2 and 2.8) phosphors were synthesized by a high temperature solid-state reaction method. Under the excitation of near ultraviolet (NUV) light, the as-prepared phosphor exhibits intense red luminescence originating from the characteristic transitions of Eu³⁺ ions, which is 1.8 times as strong as the commercial Y₂O₂S:Eu³⁺ phosphor. The optimal doping concentration of Eu³⁺ ions here is confirmed as x=1.5. The electric dipole-quadrupole (D-Q) interaction is deduced to be responsible for concentration quenching of Eu³⁺ ions in the Li₃Ba₂Y₃(WO₄)₈ phosphor. The analysis of optical transition and Huang-Rhys factor reveals a weak electron-phonon coupling interaction. The temperature-dependent emission spectra also indicate that the as-prepared Li₃Ba₂Y₃(WO₄)₈:Eu³⁺ phosphor has better thermal stability than that of the commercial Y₂O₂S:Eu³⁺ phosphor. Therefore, our results show that the as-prepared Li₃Ba₂Y₃(WO₄)₈:Eu³⁺ phosphor is a promising candidate as red emitting component for white light emitting diodes (LEDs).     

The red-emitting phosphors of Mn4+-activated A2MgWO6 (A = Ba,Sr, Ca) for light emitting diodes

A series of Mn⁴⁺ ions activated A₂MgWO₆ (A = Ba, Sr, Ca) phosphors, showing bright red emission peaks appeared around 700 nm under the excitation of 355 nm, were synthesized by the solid-state reaction. The crystal structures and photo-luminescent (PL) properties of these synthesized phosphors were deeply investigated with the aids of X-ray diffraction measurement (XRD), and the temperature dependent PL/decay curves in detail. The optimum doping concentration of Mn⁴⁺ ions in A₂MgWO₆ (A = Ba, Sr, Ca) lattices were studied through the relationship between the Mn⁴⁺ ions doping concentrations and the luminescent intensities. The thermal stability of the synthesized red-emitting phosphors was checked based on the temperature-dependent PL intensities ranging from 7 to 510 K. Comparative studies of the luminescent properties for Mn⁴⁺ ions in isostructural A₂MgWO₆ (A = Ba, Sr, Ca) lattice with double perovskite structure were studied. The results indicate that the synthesized red-emitting phosphors are the ideal choice for white light emitting diodes (W-LEDs).     

Luminescent properties and energy transfer mechanism of NaGd(MoO4)2:Sm3+, Eu3+ phosphors

Sm³⁺ singly doped NaGd(MoO₄)₂ and Sm³⁺, Eu³⁺ co-doped NaGd(MoO₄)₂ phosphors by using sodium citrate as chelating agent were synthesized via hydrothermal method. The structure and morphology were characterized by means of X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM). During the synthesis process, the Na₃Cit concentration plays a crucial role in determining the morphology and particle size of the products. The optimal doping concentration in Sm³⁺ singly doped NaGd(MoO₄)₂ phosphor was confirmed. The relevant parameters of energy transfer in the NaGd(MoO₄)₂: Sm³⁺, Eu³⁺ phosphors have been calculated based on the fluorescent dynamic analysis. Finally, on the analysis of luminescent spectra and fluorescent dynamics, the main energy transfer mechanism between Sm³⁺ and Eu³⁺ in NaGd(MoO₄)₂ phosphor is confirmed to be electric dipole-dipole interaction, and energy transfer pathway is from ⁴G_5/2 state of Sm³⁺ to ⁵D₀ state of Eu³⁺ rather than ⁵D₁ of Eu³⁺ ions.