Ce3+ induced broadband enhancement around 2 μm in Tm3+/Ho3+ co-doped tellurite glass

Tellurite glasses doped with Tm³⁺, Ho³⁺ and Ce³⁺ ions were prepared via melt-quenching to realise broadband and fluorescence enhancement in near-infrared (NIR) band. Under the pumping of a commercial 808 nm laser diode (LD), the emission bands at 2.0 μm, 1.85 μm, 1.47 μm, and 705 nm were observed in the Tm³⁺/Ho³⁺ co-doping glass samples, which originated from the transitions of Ho³⁺:⁵I₇→⁵I₈ and Tm³⁺:³F₄→³H₆, ³H₄→³F₄, ³F_2,3 → ³H₆, respectively. The existence of 2.0 μm band fluorescence is due to the energy transfer from the Tm³⁺:³F₄ level to the Ho³⁺:⁵I₇ level. This band overlaps with the 1.85 μm band which forms a broadband fluorescence spectrum in the range of 1600–2200 nm. In glass samples co-doped with Tm³⁺/Ho³⁺ with 0.085 mol% Ho₂O₃ and 1 mol% Tm₂O₃, the full width at half maximum (FWHM) of this broadband spectrum (1600–2200 nm) was as high as ∼370 nm. After introducing 0.6 mol% CeO₂, the emission intensity of broadband fluorescence increased by ∼50%, which was caused by the cross-relaxations between Ce³⁺ and Tm³⁺ ions. The lifetime of fluorescence decay was determined to prove the interactions among the doped rare-earth ions, the radiative parameters such as transition probability, branching ratio and radiative lifetime were calculated from the absorption spectra based on the Judd-Ofelt theory to better understand the observed luminescence phenomena. In addition, X-ray diffraction (XRD) confirmed the amorphous state structure of the synthesised glass samples, while Raman spectrum revealed the different vibrational structural units forming the glass network.     

Sensitization effect of Nd3+ ions on Yb3+/Nd3+ co-doped oxyfluoride glasses and study of their optical,fluorescence, and upconversion abilities for visible laser and NIR amplifier applications

The development of laser technology has created intense demand for optical confinement materials with high performance. Herein the authors have been investigated Yb³⁺-singly doped and Yb³⁺/Nd³⁺-codoped SiO₂-based oxyfluoride glasses in terms of their optical absorption, and their near-infrared (NIR) and up-conversion (UC) emissions including emission decay profiles. Under 808 nm laser diode (LD) excitation, four NIR emission bands were observed i.e., (Nd³⁺: ⁴F_3/2 → ⁴I_9/2, Yb³⁺: ²F_5/2 → ²F_7/2, Nd³⁺: ⁴F_3/2 → ⁴I_11/2, and Nd³⁺: ⁴F_3/2 → ⁴I_13/2) in co-doped glasses. NIR emission cross-sections [(σ_emi) stimulated, (σ^M_emi) from Mc-cumber theory] were calculated for ²F_5/2 → ²F_7/2 (～1030 nm) transition of Yb³⁺ ion. σ_emi was found to be highest (26.27 × 10^?21 cm²) for the Yb³⁺: ²F_5/2 → ²F_7/2 transition in N2 glass. UC emission spectra recorded at 980 nm LD show bands centered at 500, 536, 595 & 610, and 664 nm, attributed to ⁴G_9/2 → ⁴I_9/2, ⁴G_7/2 → ⁴I_9/2& ⁴G_7/2 → ⁴I_11/2, ⁴G_5/2 → ⁴I_9/2, and ⁴G_9/2 → ⁴I_13/2 transitions, respectively. Decay profiles were analyzed for Yb³⁺: ²F_5/2 → ²F_7/2 (～1030 nm) and Nd³⁺: ⁴F_3/2 → ⁴I_11/2 (～1057 nm) transitions at 808 nm LD. Energy transfer (ET) process from Nd³⁺ to Yb³⁺ in present glasses were detailed.     

Experimental and theoretical studies on NIR luminescence of titanate-germanate glasses doped with Pr3+ and Tm3+ ions

Near-infrared (NIR) luminescence of Pr³⁺ and Tm³⁺ ions in titanate-germanate glasses has been studied for laser and fiber amplifier applications. The effect of the molar ratio GeO₂:TiO₂ (from 5:1 to 1:5) on spectroscopic properties of glass systems was studied by absorption, luminescence measurements, and theoretical calculations using the Judd–Ofelt theory. It was found that independent of the TiO₂ concentration, intense NIR emissions at 1.5 and 1.8 μm were observed for glasses doped with Pr³⁺ and Tm³⁺ ions, respectively. Moreover, several spectroscopic and NIR laser parameters for Pr³⁺ and Tm³⁺ ions, such as emission bandwidth, stimulated emission cross-section, quantum efficiency, gain bandwidth, and figure of merit, were determined. The results were discussed in detail and compared to the different laser glasses. Systematic investigations indicate that Pr³⁺-doped system with GeO₂:TiO₂ = 2:1 and Tm³⁺-doped glass with GeO₂:TiO₂ = 1:2 present profit laser parameters and could be successfully applied to NIR lasers and broadband optical amplifiers.     

Doped tellurite glasses: Extending near-infrared emission for near-2.0-μm amplifiers

Tm³⁺-singly-doped and Tm³⁺-/Ho³⁺-codoped TeO₂-Bi₂O₃-ZnO-Li₂O-Nb₂O₅ (TBZLN) tellurite glasses were successfully prepared by the melt-quenching technique. Emission characteristics and energy transfer mechanisms were studied upon 785-nm laser diode excitation. A significant enhancement of emission intensity at 1.81 μm with increasing concentration of Tm³⁺ ions has been observed while increase in the emission intensity at 2.0 μm with increasing concentration of Ho³⁺ has been observed up to the equal concentration of Tm³⁺ (0.5 mol%) in TBZLN glasses. The stimulated emission cross section of Tm³⁺: ³F₄→³H₆ (5.20×10⁻²¹ cm²) and Ho³⁺: ⁵I₇→⁵I₈ (4.00×10⁻²¹ cm²) in 1.0 mol% Tm³⁺-doped and 0.5 mol% Tm³⁺/1.0 mol% Ho³⁺-codoped TBZLN glasses are higher compared with the reported and are found to be excellent candidates for solid-state lasers operating at ~1.8 and 2.0 μm, respectively. The extension of near-infrared (NIR) emission of Tm³⁺ with Ho³⁺ ions provides the possibility of using these materials for broadband NIR amplifiers.     

Photoluminescence of Ag Nanoparticles and Tm3+ Ions in the Bismuth Germanate Glasses for the Blue Light‐Excited W‐LED

Materials containing rare‐earth ions and Ag nanoparticles (NPs) have been widely applied due to prior demonstration of increase in their luminescence properties. Here, Tm³⁺ ions‐doped bismuth germanate glasses were synthesized by a chemical reduction method based on the conventional melting‐quenching technique. The Ag NPs were facilely precipitated in the glass matrix by the chemical reduction method during the annealing process. TEM image shows that the Ag NPs are closely dispersed in the glass matrix. The luminescence properties and energy‐transfer mechanism were systematically investigated by means of absorption, emission, and excitation spectra. Significant enhancements of Tm³⁺ ions emission and a broad emission band centered at 568 nm caused by Ag NPs are observed upon 474‐nm excitation. Our research may illustrate the interactions between Tm³⁺ ions and Ag NPs and provide a simplified way to synthesize the high‐efficiency luminescent materials for the blue light‐excited W‐LEDs.     

Upconverting luminescence based dual-modal temperature sensing for Yb3+/Er3+/Tm3+: YF3 nanocrystals embedded glass ceramic

Yb³⁺/Er³⁺/Tm³⁺ doped transparent glass ceramic containing orthorhombic YF₃ nanoparticles was successfully synthesized by a melt-quenching method. After glass crystallization, tremendously enhanced (about 5000 times) upconversion luminescence, obvious Start-splitting of emission bands as well as long upconversion lifetimes of Er³⁺/Tm³⁺ confirmed the incorporation of lanthanide activators into precipitated YF₃ crystalline environment with low phonon energy. Furthermore, temperature-dependent upconversion luminescence behaviors of glass ceramic were systematically investigated to explore its possible application as optical thermometric medium. Impressively, both fluorescence intensity ratio of Er³⁺: ²H_11/2 → ⁴I_15/2 transition to Er³⁺: ⁴S_3/2 → ⁴I_15/2 one and fluorescence intensity ratio of Tm³⁺: ³F_2,3 → ³H₆ transition to the combined Tm³⁺: ¹G₄ → ³F₄/Er³⁺: ⁴F_9/2 → ⁴I_15/2 ones were demonstrated to be applicable as temperature probes, enabling dual-modal temperature sensing. Finally, the thermal effect induced by the irradiation of 980 nm laser was found to be negligible in the glass ceramic sample, being beneficial to gain intense and precise probing signal and detect temperature accurately.     

High Nd3+→Yb3+ energy transfer efficiency in tungsten‐tellurite glass: A promising converter for solar cells

This work reports on the energy transfer efficiency for Nd³⁺/Yb³⁺ co‐doped tellurite glasses (80TO₂‐20WO₃, in mol%,). The correlation between Yb³⁺ ion concentration and the downconversion mechanism was investigated using optical and thermal lens spectroscopies, which enabled investigation of the radiative and nonradiative processes, respectively, involved in energy transfer from neodymium to ytterbium. The Nd³⁺ near‐infrared fluorescence disappeared almost entirely when the maximum concentration of Yb³⁺ ions (4 mol%) was doped into the host. In contrast, there was a corresponding increase in the ytterbium emission at around 980 nm. When ytterbium was added, there was also a simultaneous reduction in the amount of heat generated by the sample due to a reduction in the nonradiative decay rate, corroborating the suspected high energy transfer efficiency of Nd³⁺→Yb³⁺. The results indicate that tungsten‐tellurite glasses may be of potential use in solar cells for matching the solar emission spectrum to the semiconductor cell.     

Effective sensitization of Eu3+ ions on Eu3+/Nd3+ co-doped multicomponent borosilicate glasses for visible and NIR luminescence applications

Eu³⁺/Nd³⁺ co-doped multicomponent borosilicate glasses (ND1E: 10BaO +10ZnF₂+10K₂O +20SiO₂+(49-x) B₂O₃+1Nd₂O₃+xEu₂O₃) were prepared by conventional melting and rapid quench technique to evaluate the effect of Eu³⁺ ions in the Nd³⁺ doped glasses. Thermal stability, structural and spectroscopic characteristics of the ND1E glasses were investigated by using DSC, XRD, FTIR, Optical absorption, excitation and emission measurements. The Judd – Ofelt (JO) analysis is implemented to the absorption spectrum of the prepared glassy matrix in order to identify their potential applicability in lasing devices. Enhancement of ⁷F₀ → ⁵L₆ band (394 nm) with the increasing concentration of Eu³⁺ ion in the Nd³⁺ excitation spectra (λ_emi = 1060 nm) reveals the possibility of obtaining the characteristic fluorescence spectra of Nd³⁺ ion with the typical excitation wavelengths (Nd³⁺ = 584 nm and Eu³⁺ = 394 nm) of both rare earth ions and it is further verified from the emission spectrum. This interesting luminescence effect of showing excellent visible and NIR emission under 394 nm excitation mainly attributes the energy transfer mechanism between the RE³⁺ ions and the reason underlying this effect is discussed in detail with the help of partial energy level diagram. Energy transfer efficiency between the Eu³⁺ and Nd³⁺ ions were evaluated by using the radiative lifetimes of the prepared glasses. Also, a comparison of radiative properties and lasing characteristics of Eu³⁺/Nd³⁺ co-doped glasses with other Nd³⁺ glasses are reported. The emission intensities were characterized using CIE chromaticity diagram and the observed CIE coordinates shows a shift towards reddish – orange region with the increase in Eu³⁺ concentration. The quantum efficiency of the prepared glasses was determined experimentally. The obtained results suggest that the ND1E glassy system can be considered as a potential candidate for visible and NIR luminescence applications.     

Enhanced photoluminescence property and mechanism of Eu3+‐doped tellurite glasses by the silver and gold nanoparticles

In this work, the silver or gold nanoparticle single‐existing and co‐existing tellurite glasses doped with Eu³⁺ were prepared, and the influence of gold or silver nanoparticles on the photoluminescence of tellurite glasses doped with Eu³⁺ were investigated. The photoluminescence of tellurite glasses doped with Eu³⁺ was enhanced by the surface plasmon absorption of gold or silver nanoparticles, and the maximum luminescence enhancement factors caused by the silver and gold nanoparticles are 4.8 and 3.5 factors, respectively. The differentiation of luminescence enhancement mechanisms caused by the gold or silver nanoparticles was demonstrated. The enhanced luminescence mechanism of the Au nanoparticle single‐existing tellurite glasses doped with Eu³⁺ was from the increasing of radiative decays rate caused by the Au nanoparticles. The excitation field enhancement caused by the Ag nanoparticles was responsible for the luminescence enhancement of the Ag single‐existing tellurite glasses doped with Eu³⁺. About 4.2‐factor luminescence enhancement was observed in the Ag and Au nanoparticle co‐existing tellurite glasses doped with Eu³⁺, which is attributed to the increasing of radiative decays rate and excitation field enhancement caused by the Au and Ag nanoparticles.     

Preparation and photoluminescence enhancement of Au nanoparticles with ultra-broad plasmonic absorption in glasses

The metal nanoparticles with ultra-broad localized surface plasmonic resonance (LSPR) absorption have been widely used to enhance the up conversion luminescence (UCL) of rare-earth doped nanoparticles. However, there have been no reports on the preparation of metal nanoparticles with the ultra-broad LSPR in the glasses. In this work, the gold nanoparticles with the ultra-broad LSPR were prepared for the first time in the rare-earth doped tellurite glasses by the high-temperature melting method, and the influence of ultra-broad LSPR on the UCL of Er³⁺–Yb³⁺ and Er³⁺–Yb³⁺–Nd³⁺ co-doped tellurite glasses was investigated upon 980 and 808 nm excitation, respectively. With the precipitation of the Au NPs, about seven and 12-fold enhancements were obtained for the green and red UCL of Er³⁺–Yb³⁺ co-doped tellurite glasses excited at 980 nm, respectively, and about 5.9 and sevenfold enhancements were observed for the green and red UCL of Er³⁺–Yb³⁺–Nd³⁺ co-doped tellurite glasses excited at 808 nm, respectively. The UCL mechanism related to UCL enhancement was confirmed. The results demonstrated that the enhanced excitation field and the increasing rate of radiative decay were responsible for the enhancement of UCL.     

Preparation and luminescence of Dy3+/Tm3+ co-doped Ca3NbGa3Si2O14 glass-ceramics for w-LED

In this work, a series of Dy³⁺ and Dy³⁺/Tm³⁺ ion activated Ca₃NbGa₃Si₂O₁₄ glass-ceramics were prepared by traditional melt crystallization method, and report on the structural, optical, and energy transfer (ET)-based photoluminescence (PL) properties of glass-ceramics co-doped Dy³⁺/Tm³⁺. The preparation of glass-ceramics was studied by DTA, XRD, SEM, and UV–vis photometer technology, phase composition, transmittance, optimum heat treatment conditions, and luminescence properties. The best heat treatment procedure for obtaining transparent and well-formed glass-ceramics is crystallization at 820 °C for 5 h. The spectra excited by Tm³⁺ and Dy³⁺ have intersections at 352 nm and 365 nm, which means that CNGS: Dy³⁺/Tm³⁺ can be effectively excited by 352 nm and 365 nm ultraviolet light. Under the excitation of 352 nm ultraviolet light, four main emission peaks corresponding to ¹D₂ →³F₄, ⁴F_9/2 → ⁶H_15/2, ⁴F_9/2 → ⁶H_13/2, ⁴F_9/2 → ⁶H_11/2 were found at 456 nm, 484 nm, 577 nm, and 663 nm, respectively. When the optimal concentration (4 at.%) of Dy³⁺ is Co-doped with a different amount of Tm³⁺, the luminous color can be adjusted by adjusting the doping amount of Tm³⁺ and changing the excitation wavelength. There is an overlapping region between the emission spectrum of Tm³⁺ doped glass and the excitation spectrum of Dy³⁺ doped glass, which indicates that there is energy transfer between Tm³⁺ and Dy³⁺. In addition, CNGS: Dy³⁺/Tm³⁺ CIE coordinates show that the color coordinates (0.3324, 0.3352) when y = 0.02 under 365 nm excitation are closest to the standard white light (0.333, 0.333), indicating that this glass has potential applications in WLED devices.     

An Efficient Dual‐Mode Solar Spectral Modification for c‐Si Solar Cells in Tm3+/Yb3+ Codoped Tellurite Glasses

A series of Tm³⁺/Yb³⁺ codoped tellurite glasses, which demonstrate an interesting dual‐mode solar spectral converting for c‐Si solar cells, have been successfully prepared by conventional high‐temperature melt‐quenching technique. The photoluminescence (PL), photoluminescence excitation (PLE) spectra along with the decay curves have been studied systematically. The results indicate that the transparent glasses show two distinguishable near infrared (NIR) spectral converting behaviors, that is, quantum cutting (QC) and downshifting (DS) processes, sensitized by narrow f–f transition absorption of Tm³⁺:³H₆ → ¹G₄ at 465 nm and broad absorption band due to charge‐transfer state (CTS) of Yb³⁺‐O^2? at 320 nm, respectively. The Tm³⁺/Yb³⁺ codoped tellurite glasses convert ultraviolet (240–400 nm) and blue (450–490 nm) photons into NIR (920–1100 nm) ones, which well match the optimal spectral response of silicon (Si) solar cells. The prepared tellurite glass can be potentially utilized as spectral converter to improve the photovoltaic conversion of c‐Si solar cells. The dual‐mode solar spectrum converting material might explore a novel approach to realize UV‐Vis to NIR downconversion for Si solar cells application.     

Boroaluminosilicate glass-ceramics containing mullite-type Cr3+:Al4B2O9 nanocrystals with broadband near-infrared luminescence

Multi-component silicate glass is an ideal matrix for fabricating glass-ceramics because of its excellent physical-chemical stability and high optical transmittance. In this paper, a series of Cr³⁺ doped multi-component silicate glasses were designed for the preparation of glass-ceramics that crystalizes mullite-type Cr³⁺:Al₄B₂O₉ nanocrystals. When excited at 450 nm, the obtained GCs exhibit a broadband NIR luminescence band covering a spectral region from 650 to 1200 nm. Two different crystallographic sites of Cr³⁺ in Al₄B₂O₉ nanocrystal are considered to account for the observed broadband luminescence. Due to the controllable size and uniformly dispersion of precipitated nanoparticles, this boroaluminosilicate glass-ceramic could find potential applications as monolithic near-infrared light sources in solid-state light emitting devices.     

Broadband Near‐Infrared Down‐Shifting by Yb–O Charge‐Transfer Band in Yb3+ Singly Doped Tellurite Glasses

Yb³⁺ singly doped tellurite as‐prepared glasses and glass ceramics were synthesized by high‐temperature melt‐quenching method. The excitation and emission spectra have shown that there is an efficient near‐infrared (NIR) down‐shifting due to the sensitization of a novel Yb³⁺–O^2? charge‐transfer (CT) band. The CT band in the present host is located at around 320 nm at room temperature, which is much lower than that in other oxide hosts reported before. The possible energy‐transfer mechanism from the Yb³⁺–O^2? CT band to the ²F_5/2 multiplet of Yb³⁺ ions is discussed in detail. The concentration quenching is not observed even when the Yb³⁺‐doped concentration is increased up to 40 mol%. The excitation of this strong broad CT band causes intense NIR emission of Yb³⁺:²F_5/2→²F_7/2 from 920 to 1120 nm, making the tellurite glasses suitable for efficient photovoltaic (PV) application as a spectral conversion material for the crystalline Si (c‐Si) solar cells.     

Phase evolution,structure, and up-/down-conversion luminescence of Li6CaLa2Nb2O12:Yb3+/RE3+ phosphors (RE = Ho,Er, Tm)

Garnet-type Li₆Ca(La_0.97Yb_0.02RE_0.01)₂Nb₂O₁₂ (RE = Ho, Er, Tm) new phosphors were successfully synthesized via solid reaction at 900°C for 5 hours, whose course of phase evolution, macroscopic/local crystal structure and up-/down-conversion (UC/DC) photoluminescence were clarified. Mechanistic study and materials characterization were attained via XRD, Rietveld refinement, DTA/TG, electron microscopy (FE-SEM/TEM), and Raman/reflectance/fluorescence spectroscopies. The phosphors were shown to exhibit UC luminescence dominated by a ~ 553 nm green band (⁵F₄/⁵S₂ → ⁵I₈ transition) for Ho³⁺, a ~ 568 nm green band (⁴S_3/2 → ⁴I_15/2 transition) for Er³⁺ and a ~ 806 nm near-infrared band (³H₄ → ³H₆ transition) for Tm³⁺ under 978 nm laser excitation, with CIE chromaticity coordinates of around (0.31, 0.68), (0.38, 0.60) and (0.17, 0.24), respectively. Analysis of the pump-power dependence of UC intensity indicated that all the emissions involve a two-photon mechanism except for the ~ 486 nm blue emission of Tm³⁺ (¹G₄ → ³H₆), which requires a three-photon process. The DC luminescence of these phosphors is featured by dominant bands at ~ 553 nm for Ho³⁺ (green, ⁵F₄/⁵S₂ → ⁵I₈ transition), ~568 nm for Er³⁺ (green, ⁴S_3/2 → ⁴I_15/2 transition) and ~ 464 nm for Tm³⁺ (blue, ¹D₂ → ³F₄ transition). The UC and DC properties were also comparatively discussed.     

Color-tunable and white emission of Tm3+ doped transparent zinc silicate glass-ceramics embedding ZnO nanocrystals

Tm³⁺ doped zinc silicate glass-ceramics composed of SiO₂-Al₂O₃-ZnO-K₂O-Tm₂O₃ embedded with ZnO nanocrystals were successfully fabricated by melt-quenching method with subsequent heat treatment. Tm³⁺ ions and ZnO nanocrystals were introduced as blue and yellow luminescence centers, respectively. The effects of heat treatment, excitation wavelength and Tm³⁺ doping concentration on the photoluminescence behaviors of these glass-ceramics were studied. Short-time (5 minutes) heat treatment was considered as the optimal heat treatment time, which facilitates simultaneously emitting narrow blue peak located at 453 nm and a broad yellow band centered at 580 nm. Blue and yellow emissions could be attributed to the ¹D₂ → ³F₄ transition of Tm³⁺ and Zn_i/O_i-related defect emission of ZnO nanocrystals, respectively. The combination of these two emissions allows the realization of white light emitting in the glass-ceramic samples. Furthermore, tunable luminescent color and chromaticity coordinates, including yellow, white and blue, can be realized by varying the pumping wavelengths as well as the content of Tm³⁺ dopant in the glass matrix. Nearly perfect white light emission with Commission Internationale de l'Eclairage coordinate (x = 0.33, y = 0.32) was achieved for the 0.05 mol% Tm³⁺ doped glass-ceramic embedding ZnO nanocrystals by heat treatment at 750°C for 5 minutes under the excitation of 360 nm. These luminescent glass-ceramics doped with Tm³⁺ ion and ZnO nanocrystals could be a promising candidate for white light emitting devices under near-ultraviolet excitation.     

Triple NIR light excited up-conversion luminescence in lanthanide-doped BaTiO3 phosphors for anti-counterfeiting

Up-conversion luminescent (UCL) materials are excellent candidate for optical anti-counterfeiting and the exploitation of multi-wavelength NIR light triggered UC phosphors with tunable color emission is essential for reliable anti-counterfeiting technology. Herein, a series of lanthanide ions (Er³⁺, Er³⁺–Ho³⁺, and Yb³⁺–Tm³⁺) doped BaTiO₃ submicrometer particles are synthesized through a modified hydrothermal procedure. XRD and SEM measurements were carried out to identify the structure and morphology of the samples and their UCL properties under 808, 980, and 1550 nm NIR excitation are investigated. Er³⁺ singly doped sample exhibits Er³⁺ concentration-dependent and excitation wavelength-dependent emission color from green to yellow and orange. The corresponding UC mechanisms under three NIR light excitation are clarified. Pure red emission under 1550-nm excitation was obtained by introducing small amount of Ho³⁺ and the fluorescent lifetime test was used to confirm the energy transfer from Er³⁺ to Ho³⁺. In addition, Yb³⁺–Tm³⁺ co-doped sample shows intense blue emission from ¹G₄ → ³H₆ transition of Tm³⁺ under 980-nm excitation. As a proof of concept, the designed pattern using phosphors with red, green, and blue three primary color emissions under 1550, 808, and 980 nm NIR excitation was displayed to demonstrate their anti-counterfeiting application.     

The effect of Nd3+ concentration on fabrication,microstructure, and luminescent properties of anisotropic S-FAP ceramics

Nd³⁺ doped strontium fluorophosphate (S-FAP), with chemical formula Sr₅(PO₄)₃F, nanopowders were prepared using the co-precipitation method. The prepared powders had no impurity phase with a grain size of about 30 nm and the doping limit of Nd³⁺ ions in strontium fluorophosphate is about 9 at.%. The morphology and particle size were determined by the doping concentration of Nd³⁺. Anisotropic Nd: S-FAP transparent ceramics with different Nd³⁺ doping concentrations were fabricated successfully by the simple hot-pressing method. The grain size of prepared S-FAP transparent ceramics decreased first and then increased with the increase of Nd³⁺ concentration. The 2 at.% Nd: S-FAP ceramic presented the highest optical transmittance at all wavelengths range. The characteristic transitions from the ground state to the excited states of Nd³⁺ ions were observed from the absorption spectra, and the absorption cross-section was calculated at 3.71 × 10^–20 cm². The influence of Nd³⁺ ion concentration on luminescence intensity and fluorescence lifetime was studied under 796 nm excitation. The strong emission of ⁴F_3/2→⁴I_9/2 transition in Nd: S-FAP was calculated by Judd–Ofelt (J-O) theory.     

Structural,luminescence and NMR studies on Nd3+-doped sodium–calcium-borate glasses for lasing applications

In this work, Neodymium (Nd³⁺) -doped borate glasses were synthesised by melt-quenching method and their structural as well as optical properties were analysed through XRD, Raman, NMR, DSC, UV–Visible, luminescence and decay studies for the possible application as laser gain medium. DSC and XRD results revealed that the glasses have high transition temperature and are in amorphous nature, respectively. The vibrational characteristics of the host matrices as well as the effect of Nd³⁺ incorporation were analysed by using Raman spectra, which exhibit majorly borate groups as supported by NMR results. The band gap energy of the glasses decreases with an increase in Nd³⁺ concentration. Using Judd-Oflet theory the characteristic intensity parameters (Ω_λ, λ = 2, 4 and 6) were calculated and further used for calculating the various radiative parameters from the emission spectra. The emission cross-section (σ_em) was estimated as high as 1.15 × 10⁻²⁰ cm² from the Füchtbauer–Landenburg (FL) equation for the dominant ⁴F_3/2→⁴I_11/2 (1056 nm) transition. The effect of Nd³⁺ concentration on the lifetime of the ⁴F_3/2 luminescent level was analysed from the decay curve analyses. From which, the corresponding quantum efficiency (η) was estimated and found as high as 54%. The investigated result suggests the prepared glasses can be utilized as gain medium to generate laser at around 1.05 μm.     

Photoluminescence of Tb3+/Sm3+ ions co-activated in SrO - Na2O - WO3 - tellurite glasses for multicolor laser applications

A novel series of Tb³⁺, Sm³⁺ single doped and Tb³⁺/Sm³⁺ co-incorporated tungsten tellurite glasses were synthesized by melt quenching technique and corresponding structural as well as luminescence features of the prepared glasses have been reported here. Spectral overlapping between the luminescence spectra of Tb³⁺ ions and the excitation spectra of Sm³⁺ ions manifests that the energy transfer process takes place from Tb³⁺ ions to Sm³⁺ ions. By using the dual excitations at 377 and 484 nm, the titled co-doped glasses emit green light of wavelength 542 nm along with reddish – orange colour light at 599 nm. In addition to this, there is no possibility of reverse energy transfer which is validated with the help of excitation at 403 nm (Sm³⁺ ions) as major evidence. The lifetimes of all co-doped glasses decline with increasing Tb³⁺ doping level in the ligand matrices, indicating the energy migration process takes place from Tb³⁺→ Sm³⁺. The chromaticity coordinates of all synthesized co-doped glasses lie in yellowish-orange region of CIE1931 diagram and it shifts to deep yellow region when Tb³⁺ ion concentration varies. Our findings propose that the titled glasses can be used as visible laser materials for multicolor laser applications.