Giant electric field-induced strain at room temperature in LiNbO3-doped 0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3

We report experimental investigation on the ferroelectricity and electric field-induced strain response in LiNbO₃-doped 0.94(Bi_0.5Na_0.5)TiO₃-0.06BaTiO₃ (BNT-BT) piezoelectric ceramics. At room temperature, a large strain of 0.6% (at 70 kV/cm) is achieved in the 2.5%-LiNbO₃-doped BNT-BT, higher than that of commercially-utilized Pb(Zr,Ti)O₃. The corresponding piezoelectric coefficient d^*₃₃ reaches 857 pm/V, which is high among these of BNT-based ceramics at room temperature. Further study indicates that the superior piezoelectric properties are realized at the ferroelectric-relaxor transition temperature T_F-R, which is pushed to room temperature with 2.5% LiNbO₃ doping. This indicates that large electromechanical response can be induced via delicate mixing of the ferroelectric rhombohedral phase and the polar nanoregions (PNRs) relaxor-ferroelectric tetragonal phase.     

Giant field-induced strain in Nb2O5-modified (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free ceramics

Lead-free piezoceramics (Na_(1+x)/2Bi_(1-x)/2)_0.94Ba_0.06Ti_1-xNb_xO₃ (BTN100x) were prepared using conventional solid-state reaction method. The structures, field- induced strain, AC impedance of sintered ceramics were investigated. The pure perovskite solid solution BTN3 exhibited giant electric-field-induced strain of 0.478% under an electric field of 70 kV/cm at ambient temperature, meanwhile, the normalized strain (S_max/E_max) reached up to 654 pm/V. The giant strain was insensitive to temperature and exhibited excellent fatigue resistance performance within 10⁶ switching cycles, making it a promising candidate material for actuator applications. Complex AC impedance spectra confirmed the contribution of grain effect to resistivity behavior. The field-induced giant strain was attributed to the phase transition between ferroelectrics and relaxor ferroelectrics induced by introducing Nb₂O₅.     

Two-step sintering of 0.93Bi0.5Na0.5TiO3-0.07BaTiO3 lead-free piezoelectric material

Two-step sintering (TSS) as an efficient sintering method for obtaining dense microstructure while preventing excess grain growth was used for sintering 0.93Bi_0.5Na_0.5TiO₃-0.07BaTiO₃ composition which is located near the morphotropic phase boundary of this binary system. In order to compare the obtained microstructure and piezoelectric properties, conventional single step sintering (SSS) was also examined. Microstructure evolution during sintering at different temperatures was investigated to find the optimum sintering temperature. Ferroelectric hysteresis loop as well as unipolar strain behavior of optimally sintered ceramics was studied. According to density measurement and microstructure studies of the prepared ceramics, TSS resulted in finer and more dense and uniform microstructure compared to SSS method. As a result remnant polarization of TSSed ceramic was increased by 35% and its coercive field was decreased by 16%. The inverse piezoelectric coefficient of the SSSed and TSSed was obtained 220 and 300 p.m./V, respectively. These values are high enough for practical applications such as actuators. The obtained results clearly showed that TSS is capable of sintering 0.93Bi_0.5Na_0.5TiO₃-0.07BaTiO₃ at temperatures lower than which is required for SSS method. Therefore the composition stoichiometry is maintained after sintering and denser microstructure without abnormal grain growth is obtained which is responsible for improved electrical properties of the piezoceramics.     

Large field-induced strain with enhanced temperature-stable dielectric properties of AgNbO3-modified (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free ceramics

(1-x)(Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃-xAgNbO₃ lead-free piezoelectric ceramics (abbreviated as BNBT-100xAN) were prepared using the conventional solid-state sintering method. The effects of the introduction of AgNbO₃ (AN) dopants for the dielectric and piezoelectric performances of BNBT-100xAN ceramics were systematically studied. The XRD patterns and Raman spectra demonstrated that AN as a modifier was successfully diffused into the BNBT-100xAN lattice and revealed a pseudo-cubic symmetry structure. All samples exhibited a dense surface morphology accompanied by the uniform distribution of elements. A large bipolar strain of ~0.501% and unipolar strain of ~0.481% corresponding to the normalized strain d₃₃* of ~740 p.m./V were achieved for BNBT-1AN ceramic at 65 kV/cm field. The BNBT-4AN ceramic exhibited an excellent temperature-stable permittivity with the range from 59 to 380 °C and its dielectric loss was less than 0.02 between 97 °C and 329 °C. These results revealed that BNBT-100xAN ceramics were more hopeful candidates for actuators, strain sensors, and high-temperature capacitors.     

Dielectric,ferroelectric and field-induced strain response of lead-free (Fe,Sb)-modified (Bi0.5Na0.5)0.935Ba0.065TiO3 ceramics

Lead-free piezoelectric ceramics (Bi_0.5Na_0.5)_0.935Ba_0.065Ti_1−x(Fe_0.5Sb_0.5)_xO₃ (BNBT6.5–xFS, x=0.005, 0.010, 0.015, 0.020) were prepared by a conventional solid sintering technique. The effects of B-site doping of (Fe, Sb) on the phase structure, microstructure, dielectric, ferroelectric, and piezoelectric properties of BNBT6.5 ceramics were systematically investigated. Results showed that (Fe, Sb) can completely diffuse in the BNBT6.5 lattice in the all studied components. The addition of (Fe, Sb) destroyed the ferroelectric long-range order, and thus promoted the electric field induced strain response. The maximum electric field-induced strain (S_max=0.37%) with normalized strain (d₃₃*=S_max/E_max=454 pm/V) at an applied electric field of 80 kV/cm was obtained at x=0.015. Temperature dependent measurements of both polarization and strain from room temperature to 120 °C suggested that the origin of the large strain is due to a reversible field-induced ergodic relaxor to ferroelectric phase transformation.     

Improved electric-field-induced strain and strong photoluminescence properties in novel Er3+-modified 0.93Bi0.5Na0.5TiO3-0.07BaTiO3 multifunctional ceramics

Recently, the progress of electronic devices toward miniaturization has strongly promoted development of multifunctional materials possessing multiple desirable properties. In this study, we develop and fabricate 0.93Bi_0.5Na_0.5TiO₃-0.07BaTiO₃-xEr multifunctional ceramics which show simultaneously considerable electric-field-induced strain and bright green light emission properties. With the introduction of Er³⁺, the ceramics gradually transform from non-ergodic relaxor phase to ergodic relaxor phase which could reversibly transform to ferroelectric phase under the electric field. As a result, with improving Er³⁺ content, the shape of the polarization-electric field loops of the ceramics become pinched, and it is obvious that the negative strain disappears while the positive strain gradually increases and reaches a maximum value 0.46% at x = 1.2 mol%. Besides, After the ceramics are poled, the light emission peak are greatly enhanced attributed to the decreased crystal symmetry and increased domain size, and is the strongest at x = 1.2 mol%. These results indicate that 0.93Bi_0.5Na_0.5TiO₃-0.07BaTiO₃-xEr ceramics are good candidates for developing multifunctional optoelectronic devices.     

BaTiO3 nanowires-induced phase transition and thermally stable strain in (Bi0.5Na0.5)TiO3 piezoelectric ceramics

Environment-friendly lead-free piezoceramics with high strain response and extremely excellent stability in a wide operating temperature range are critically important in practical actuator applications. Here, we develop a new strategy to tune the electrostrictive strain behavior in Bi_0.5Na_0.5TiO₃ (BNT)-based ceramics via using high aspect ratio BaTiO₃ nanowires (BT NWs) as a modifier. The addition of BT NWs generates a crossover from a typical ferroelectric (BT conventional spherical particles) to a complete ergodic relaxor (ER) phase at ambient temperature, accompanied by a large electrostrictive strain of ∼0.17% with d₃₃*(S_max/E_max) = 284 pm/V. Such a high electrostrictive strain is extremely thermally stable with only <7% fluctuation from 27 °C to 120 °C. In addition, the BT NWs-modified ceramics also exhibit acceptable fatigue endurance (<30% up to 10⁵ cycles) and frequency dependence (<20% at 10Hz–100Hz). These achieved exceptional performances can be ascribed to the BT NWs-driven complete ER phase at room temperature. The findings of this study can inspire enhanced interest in nanowires as a viable modifier to BNT-based materials due to promising potential for practical actuator applications in a wide temperature range.     

Large electrostrain and structural evolution in (1-x)[0.94Bi0.5Na0.5TiO3-0.06BaTiO3]-xAgNbO3 ceramics

A lead-free system formulated as (1-x)[0.94Bi_0.5Na_0.5TiO₃-0.06BaTiO₃]-xAgNbO₃ exhibits an electrostrain of 0.50% at 80 kV/cm and a maximum d₃₃^* of 721 pm/V at 60 kV/cm for x=0.3. The incorporation of AgNbO₃ shifts the relaxor-ferroelectric phase transformation temperature (T_F-R) to room temperature and lowers the energy barrier of the field-induced phase transformation. Furthermore, the in-situ electric field dependent high-energy synchrotron X-ray diffraction (SXRD) technique reveals that the sample x=0.03 transforms from dominant P4bm phase to a phase mixture of R3c + P4mm at 55 kV/cm during the electric field loading, and returns to initial dominant P4bm phase at 15 kV/cm during the unloading cycle of the electric field. Furthermore, it can be demonstrated that the electric field induced-phase transition in NBTBT-3AN occurs in the whole sample, rather than in the single direction of electric field. Therefore, the electrocstrain in NBTBT-3AN is more uniform, which would be beneficial to its actuator applications.     

(0.94-y)Bi_(0.5)Na_(0.5)TiO_3-0.06BaTiO_3-yBiCoO_3陶瓷的制备与性能

为发展绿色无毒的PZT(lead zirconate titanate,锆钛酸铅)压电陶瓷替代压电材料,钛酸铋钠因其剩余极化强和压电性能好等特点被广泛研究。为进一步提高其压电性能,我们利用传统固相合成工艺制备了(0.94-y)Na_(0.5)Bi_(0.5)Ti O3-0.06Ba Ti O3-y Bi Co O3无铅压电陶瓷。探究了在Ba Ti O3定量的情况下,Bi Co O3对陶瓷的热学性质、结构、压电性能的影响。实验结果表明,微量添加Bi Co O3对BNBT6的结构基本没有影响,所制备的陶瓷仍均为单一的钙钛矿结构;随着Bi Co O3含量的增加,剩余极化强度Pr和矫顽场Ec都是先降低后增加;通过对陶瓷样品的压电性能分析,可以看出Bi Co O3的掺杂量为0.01时,陶瓷样品的压电常数d33取得最大值171 p C/N。     

Thermally-stable large strain in Bi(Mn0.5Ti0.5)O3 modified 0.8Bi0.5Na0.5TiO3-0.2Bi0.5K0.5TiO3 ceramics

(1-x)[0.8Bi_0.5Na_0.5TiO₃-0.2Bi_0.5K_0.5TiO₃]-xBi(Mn_0.5Ti_0.5)O₃ (x = 0–0.06, BNKMT100x) lead-free ferroelectric ceramics were prepared via solid state reaction method. Bi(Mn_0.5Ti_0.5)O₃ induces a structure transition from rhombohedral-tetragonal morphotropic phases to pseudo-cubic phase. Moreover, the wide range of compositions within x = 0.03–0.055 exhibit large strain of 0.31%–0.41% and electrostrictive coefficient of 0.027–0.041 m⁴/C². Especially, at x = 0.04, the large strain and electrostrictive coefficient are nearly temperature-independent in the range of 25–100 °C. The impedance analysis shows the large strain and electrostrictive coefficient originate from polar nanoregions response due to the addition of Bi(Mn_0.5Ti_0.5)O₃.     

Enhancement of pyroelectric properties of lead-free 0.94Na0.5Bi0.5TiO3-0.06BaTiO3 ceramics by La doping

Lead-free 0.94NBT-0.06BT-xLa ceramics at x = 0.0–1.0 (%) were synthesized by a conventional solid-state route. XRD shows that the compositions are at a morphotropic phase boundary where rhombohedral and tetragonal phases coexist. With increasing La³⁺ content pyroelectric coefficient (p) and figures of merits greatly increase; however, the depolarization temperature (T_d) decreases. p is 7.24 × 10⁻⁴C m⁻² °C⁻¹ at RT at x = 0.5% and 105.4 × 10⁻⁴C.m^−2 °C⁻¹ at T_d at x = 0.2%. F_i and F_v show improvements at RT from 1.12 (x = 0%) to 2.65 (x10 ⁻¹⁰ m v⁻¹) (x = 0.5%) and from 0.021 to 0.048 (m².C⁻¹) respectively. F_i and F_v show a huge increase to 37.6 × 10⁻¹⁰ m v⁻¹ and 0.56 m² C⁻¹ respectively at T_d at x = 0.2%. F_C shows values of 2.10, 2.89, and 2.98 (x10⁻⁹C cm⁻² °C⁻¹) at RT at 33, 100 and 1000 (Hz) respectively. Giant pyroelectric properties make NBT-0.06BT-xLa at x = 0.2% and 0.5% promising materials for many pyroelectric applications.     

Giant electro-strain and enhanced energy storage performance of (Y0.5Ta0.5)4+ co-doped 0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3 lead-free ceramics

0.94(Bi_0.5Na_0.5)(Y_0.5Ta_0.5)_xTi_1-xO₃-0.06BaTiO₃ lead-free piezoelectric ceramics were prepared by a conventional solid-state reaction method to study their excellent electro-strain properties and energy storage characteristics systematically. All ceramics exhibited a dense surface morphology. The introduction of (Y_0.5Ta_0.5)⁴⁺ complex ions destroyed the long-range ferroelectric order, which reduced the T_F-R to the operating temperature, resulting in an easier field-induced transition between relaxor and ferroelectric phase. Therefore, for x = 0.01 component attained unipolar strain of 0.37% under 52 kV/cm, and the corresponding normalized strain d₃₃* was 708 pm/V. Besides, the destruction of the ferroelectric phase also induced a pinched hysteresis loop and the maximum storage density of 1.215 J/cm³ with the efficiency of 68.7% obtained at 98 kV/cm for BNYT30 ceramics. These all demonstrated that the doping of complex ions (Y_0.5Ta_0.5)⁴⁺ made the BNT-BT an outstanding candidate for actuators and energy storage devices.     

Tuning the electrocaloric effect in 0.94Bi0.5Na0.5TiO3-0.06BaTiO3 ceramics by relaxor phase blending

The pseudo-first-order phase transition in 0.94Bi_0.5Na_0.5TiO₃-0.06BaTiO₃ ceramics leads to a sharp increase in temperature change (ΔT) in the vicinity of the ferroelectric-to-relaxor transition temperature T_FR (~100 °C) [Appl. Phys. Lett. 110 (2017) 182904]. In this study, we add the 0.78Bi_0.5Na_0.5TiO₃-0.06BaTiO₃-0.16(Sr_0.7Bi_0.2)TiO₃ relaxor phase to the 0.94Bi_0.5Na_0.5TiO₃-0.06BaTiO₃ ferroelectric matrix to tune its electrocaloric effect. The results show that the addition of the relaxor phase plays a vital role in phase and local-structure evolution. A transition occurs between the ferroelectric and ergodic relaxor phases when the mass fraction of the latter increases to 30% (x = 0.3), as verified by X-ray diffraction analysis, Raman spectroscopy, and polarization-electric field (P-E) hysteresis loops. Furthermore, addition of the relaxor phase reduces the T_FR from 76 °C at x = 0.1–55 °C at x = 0.2; however, this transition disappears at x = 0.3 and 0.4 composite. In-situ piezo-force microscopy (PFM) images illustrate that domains can be written into x = 0.1 and 0.2 ceramics with a valley in the piezoresponse curves. Increasing the temperature agitates the domain arrangement and decreases the contrast for PFM images; this indicates a gradual phase transition in the composite. The temperature corresponding to maximum ΔT exhibits a downward shift (0.58 K at 80 °C for x = 0.1 and 0.5 K at 65 °C for x = 0.2), while the temperature-ΔT curves are flat when x = 0.3 and 0.4. Moreover, the maximum ΔT shows a decrease with an increase in the relaxor phase content; this is believed to be related to a decrease in the latent heat due to a pseudo-first-order to second-order transition. Thus, we suggest that the incorporation of a relaxor phase into ferroelectric matrices is an effective technique to tune their electrocaloric effect and improve the thermal stability of ceramic composites.     

Antiferroelectricity in tantalum doped (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free ceramics

(Bi_0.5Na_0.5)_0.94Ba_0.06(Ti_1−xTa_x)O₃ (x=0.00–0.04) lead-free polycrystalline ceramics were synthesized using the solid state reaction route, and their crystal structures and electrical properties were systematically studied. With the introduction of Ta substitution, the relaxor antiferroelectric phase with tetragonal P4bm symmetry is stabilized. The representative double polarization hysteresis loops and sprout shaped strain curves for antiferroelectric ceramics are observed at higher Ta contents with x=0.01–0.02 at room temperature. x=0.01 shows the largest strain of 3.81‰ under 60 kV/cm, indicating a good candidate for actuator applications. The polarization and strain hysteresis loops are also evaluated to verify the temperature-induced normal ferroelectric phase to relaxor antiferroelectric phase transition at temperature up to 120 °C. The energy storage density and efficiency at various temperatures are calculated and analyzed in the compositions of x=0.00–0.02. The results indicate that the energy storage density becomes more temperature independent with the increase of Ta concentration, which are promising for applications in high-temperature capacitors.     

Microstructure,dielectric, piezoelectric,and ferroelectric properties of fine-grained 0.94Na0.5Bi0.5TiO3-0.06BaTiO3 ceramics

For preparing fine-grained 0.94Na_0.5Bi_0.5TiO₃-0.06BaTiO₃ lead-free ferroelectric ceramics, the precursor powders were synthesized via sol-gel method and calcined at various temperatures. The precursor powders calcined at 520 °C, 550 °C, and 600 °C exhibit mean grain sizes of 30 ± 4 nm, 54 ± 3 nm, and 78 ± 5 nm, respectively. By optimizing the synthesis parameters, the fine-grained ceramics with high relative densities (>97%) and mean grain size around 100 nm were prepared. The ferroelectric, dielectric, and piezoelectric behavior were investigated. The ceramics prepared using the different precursor powders show different piezoelectric, ferroelectric, and dielectric behavior. The ceramic calcined at 550 °C and sintered at 900 °C exhibits the breakdown strength higher than 85 kV/cm, which exhibits the maximum polarization of 38.4 ± 0.3 μC/cm², remanent polarization of 20.6 ± 0.4 μC/cm².     

Enhanced temperature stable dielectric properties and energy-storage density of BaSnO3-modified (Bi0.5Na0.5)0.94Ba0.06TiO3 lead-free ceramics

A series of (1-x)(Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃-xBaSnO₃ (BNBT-100xBSN, x = 0–20) lead-free ceramics were synthesized using a conventional high-temperature solid-state reaction route. The effects of BaSnO₃ on the dielectric, ferroelectric and energy-storage performance of BNBT-BSN were systematically investigated. Temperature dependent permittivity curves indicated the obviously enhanced relaxor ferroelectric property. The introduction of BaSnO₃ reduced the temperature corresponding to the first dielectric anomaly, which facilitated the dielectric temperature stability. △ε'/ε'_150°C varied no more than 15% within the temperature range of up to 338 °C (45–383 °C) for BNBT-15BSN. A slimed P-E loop was obtained with the remnant polarization of 0.4 μC/cm² for BNBT-15BSN. Moreover, the breakdown field intensity of BNBT-BSN increased effectively from 80 kV/cm to 115 kV/cm. Therefore, an optimum energy-storage performance was obtained in BNBT-15BSN with the energy-storage density of 1.2 J/cm³ whose energy-storage efficiency reached 86.7%. Furthermore, the possible contributions of defect and vacancy to relaxation and conductance mechanism were discussed by studying the impedance and electric modulus. The results above indicated the BNBT-100xBSN be a promising lead-free candidate for energy-storage capacitors.     

Low hysteresis and temperature stable electrostrain in 0.97(0.94Na0.5Bi0.5TiO3-0.06BaTiO3)-0.03AgNbO3/xZnO composite ceramics

Na_0.5Bi_0.5TiO₃-based solid solutions are one of the most promising lead-free piezoelectric candidates since they can be easily tailored to exhibit large electrostrain. However, the large hysteresis and temperature-dependence of the electrostrain response are longstanding obstacles for their practical applications. In the present study, 0–3 type composites were developed with 0.97(0.94Na_0.5Bi_0.5TiO₃-0.06BaTiO₃)-0.03AgNbO₃ (NBT-6BT-3AN) matrix phase and ZnO inclusions. The optimum addition of 5 wt.% ZnO in the composites leads to reduction in hysteresis of electrostrain by 35% in comparison with pure NBT-6BT-3AN at room temperature. Meanwhile, electrostrain of the composites maintains superior temperature stability, with a variance of less than ±10% in the temperature range between 25 and 125 °C. The reason for the improvement of electrostrain is proposed to be attributed to the ergodic/nonergodic mixture phases induced by residual stress between the inclusion and matrix, as well as the phase evolution caused by the incorporation of Zn²⁺ into the matrix. Therefore, this work provides a new strategy to improve the electromechanical properties of Na_0.5Bi_0.5TiO₃-based ceramics.     

Polar domain structural evolution under electric field and temperature in the (Bi0.5Na0.5)TiO3-0.06BaTiO3 piezoceramics

Lead-free bismuth sodium titanate and related compounds are of great interest as promising candidates for piezoelectric applications. However, the full understanding of this family of materials is still a challenge partly because of their structural complexity and different behaviors with or without the application of an external electric field. Here, piezoresponse force microscopy is used to gain insight into the mesoscopic-scale domain structure of the morphotropic phase boundary (MPB) composition of (1-x)Bi_0.5Na_0.5TiO₃-xBaTiO₃ solid solution at x = 0.06 (abbreviated as BNT-6BT). The evolution of the domains with the changes of the electric field and temperature has been thoroughly examined in conjunction with the crystal structure analysis and dielectric studies. It is found that ferroelectric domains with size of hundreds of nanometers are embedded in a relaxor state without visible domains on a mesoscopic scale, which are considered to contribute to the tetragonal and cubic phases in the material, respectively. Temperature-independent domain configuration is observed in the unpoled sample from room temperature to 200°C. While, temperature-dependent domain configuration is observed in the poled sample. The homogenously poled state breaks into the mixed domain configuration containing polydomain structure and invisible state around the so-called depoling temperature. The structural changes on different length scales are also discussed. This work provides an in-depth understanding of the structural and domain changes under an electric field and the temperature-dependent domain evolution in both unpoled and poled states in the BNT-BT solid solution of the MPB composition.     

Polarization behavior of` lead-free 0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3 thin films with enhanced ferroelectric properties

(Bi_0.5Na_0.5)TiO₃ based ferroelectric lead-free thin films have great potential for modern micro-devices. However, the multicomponent feature and volatile nature of Bi/Na makes the achievement of high quality films challenging. In this work, the morphotropic phase boundary composition, 0.94(Bi_0.5Na_0.5)TiO₃-0.06BaTiO₃ thin films were successfully prepared by CSD method. Dense films with low dielectric loss and low leakage current density were obtained. A well-defined polarization hysteresis loop with a high remnant polarization was observed in the thin films. Moreover, the polarization behavior of the film at original state, under electric field and upon heating was investigated by PFM. A self-polarization and asymmetric domain switching behavior were observed. High temperature induced depolarization and the self-polarization recovered upon cooling. The thin films with good quality show a promising potential for the application in electrical devices, and the in-depth investigation of the polarization behavior improves the understanding of ferroelectric and piezoelectric properties of thin films.     

Dielectric,ferroelectric and field-induced strain behavior of K0.5Na0.5NbO3-modified Bi0.5(Na0.78K0.22)0.5TiO3 lead-free ceramics

Lead-free piezoelectric (1 ? x)Bi_0.5(Na_0.78K_0.22)_0.5TiO₃–xK_0.5Na_0.5NbO₃ (BNKT–xKNN, x = 0–0.10) ceramics were synthesized using a conventional, solid-state reaction method. The effect of KNN addition on BNKT ceramics was investigated through X-ray diffraction (XRD), dielectric, ferroelectric and electric field-induced strain characterizations. XRD revealed a pure perovskite phase with tetragonal symmetry in the studied composition range. As the KNN content increased, the depolarization temperature (T_d) as well as maximum dielectric constant (?_m) decreased. The addition of KNN destabilized the ferroelectric order of BNKT ceramics exhibiting a pinched-type hysteresis loop with low remnant polarization (11 μC/cm²) and small piezoelectric constant (27 pC/N) at 3 mol% KNN. As a result, at x = 0.03 a significant enhancement of 0.22% was observed in the electric field-induced strain, which corresponds to a normalized strain (S_max/E_max) of ～434 pm/V. This enhancement is attributed to the coexistence of ferroelectric and non-polar phases at room temperature.