Enhanced electromagnetic wave absorption performance of SiCN(Fe) fibers by in-situ generated Fe3Si and CNTs

The SiCN(Fe) fibers with excellent one-dimensional microstructure and electromagnetic wave (EMW) absorption performance were synthesized by combining polymer-derived ceramics (PDCs) method and electrospinning. The in-situ generation of Fe₃Si and CNTs by adding ferric acetylacetonate (FA) into the raw materials effectively improved the dielectric properties, magnetic properties and the impedance matching performance of the SiCN(Fe) fibers. The EMW absorption performance of SiCN(Fe) fibers were mainly based on dipole polarization loss, interface polarization loss and eddy current loss. The RL_min value of SiCN(Fe) fibers reached ?47.64 dB at 1.38 mm and the effective absorption band (EAB, RL ≤ ?10 dB) reached 4.28 GHz (13.72–18 GHz, 1.35 mm).     

Enhanced EMW absorption properties of SiCN/Fe/Ni ceramics modified with Fe/Ni bimetal

The SiCN/Fe/Ni ceramics codoped with iron acetylacetonate (FA) and nickle acetylacetonate (NA) was synthesized by polymer-derived ceramics (PDCs) method in this study. The microstructure, phase composition and electromagnetic wave (EMW) absorption properties of the samples were analyzed. The polarization loss and conduction loss of materials were analyzed by the direct current (DC) multimeter and the contribution rate of polarization loss was more than 94% in the whole frequency band. The results showed that C, SiC, Fe₂Si, Ni₃Si, γ- (Fe, Ni) and CNTs were formed after pyrolysis which provided lots of heterogeneous interface and enhanced the interfacial polarization. Meanwhile, Ni could enter the lattice of Fe and formed a unique electronic configuration, which reinforced the conductivity and stability of Fe. In addition, the in-situ generated Fe₂Si and Ni₃Si provided magnetic loss and conduction loss. The RL_min value of SiCN/Fe/Ni-3 ceramic was ?52.06 dB at 1.54 mm and the effective absorption band (EAB, RL ≤ ?10 dB) reached 4.21 GHz (13.79–18 GHz, 1.43 mm).     

The heterointerface of graphene in-situ growth for enhanced microwave attenuation properties in La-doped SiBCN ceramics

The electromagnetic wave (EMW) absorbing materials are widely applied to attenuate the useless and harmful EMW generated from wireless communication and 5G networks, which could protect the human health and electronic device safety. In this study, La-doped SiBCN ceramics with broadband EMW absorption capability were prepared via generating abundance of heterointerfaces, as graphene were in-situ grown by La₂O₃ catalyzing. The graphene in-situ formed in the ceramics can be attributed to the La atom decreasing the potential energy of the free carbon ring nucleation from −760.9 Ha to −8984.3 Ha. Consequently, the electrical conductivity of the SiBCN ceramics improved from 12.360 S/m to 18.025 S/m, the minimum reflection loss (RL_min) obtained was −26.48 dB at 7.2 GHz and the effective absorption bandwidth (EAB) was 6.32 GHz (11.68–18.00 GHz) at a thickness of 1.7 mm. At 700 °C, the RL_min and EAB values reached −43.18 dB and 4.2 GHz, respectively. The enhanced EMW absorbing capability can be attributed to the rationally tailor the heterointerfaces to improve the polarization loss and conduction loss of the SiBCN ceramics. The interfaces between graphene and amorphous phases generate built-in electric fields and space chare regions to strengthen the interface polarization, while the electrons migrating rapidly in the graphene and other crystals improved the electrical conductivity. The positive effect of heterointerfaces regulation of graphene in-situ growth improved the dielectric loss capacity of the SiBCN ceramics; therefore, this study provides a feasible method to enhance the EMW absorption capability of polymer-derived ceramics.     

Enhanced electromagnetic microwave absorption of Fe/C/SiCN composite ceramics targeting in integrated structure and function

The Fe/C/SiCN composite ceramics were synthesized by polymer-derived method to obtain the integration of structure and functions. The electromagnetic waves (EMW) absorption properties at X and Ku bands were investigated. The addition of nano-sized Fe particles improved the magnetic loss and impedance matching, and the carbon nanotubes generated by the iron in-situ catalysis increased the internal relaxation polarization and interfacial polarization, which together improved the EMW absorption properties significantly. In particular, the Fe/C/SiCN-9 showed the optimum reflection loss (RL) of ?31.06 dB at 10.03 GHz with an effective absorption bandwidth (EAB, RL < ?10 dB) of 3.03 GHz at 2.51 mm, indicating the excellent EMW absorption properties of Fe/C/SiCN composite ceramics.     

SiCN ceramics with controllable carbon nanomaterials for electromagnetic absorption performance

Different kinds of carbon nanomaterials, free carbon (C_free), graphene, and N-containing graphene (NG), in single-source-precursors-derived SiCN ceramics, were in situ generated by modifying polysilazane with divinylbenzene, dopamine hydrochloride and melamine, respectively. Adjusting the carbon source brings phase structure and electromagnetic wave absorption (EMA) properties differences of SiCN/C ceramics. In situ C_free enhances the EMA capacity of SiCN ceramics by improving their electrical conductivity of 9.2 × 10⁻⁴ S/cm. The electrical conductivity of SiCN ceramics with 2D graphene sheets balloons to 2.5 × 10⁻³ S/cm, causing poor impedance match thus leading to a worse EMA performance. In situ NG in SiCN ceramics has a low electrical conductivity of 5.6 × 10⁻⁸ S/cm, making for excellent impedance match. The corrugated NG boosts dielectric loss, interfacial, and dipole polarization. NG-SiCN nanocomposites possess an outstanding EMA performance with RL_min of −61.08 dB and effective absorption bandwidth of 4.05 GHz, which are ∼2.4 times lower and ∼4 times higher than those of SiCN, respectively.     

Polymer-derived Co2Si(Co)/SiCN composite ceramics with tunable microwave absorption properties

In this paper, Co₂Si(Co)/SiCN composite ceramics were synthesized by simple precursor-derived ceramics method. The phase composition, morphology, and microwave absorption properties of Co₂Si(Co)/SiCN composite ceramics at different pyrolysis temperatures (1000–1400°C) were studied. When pyrolysis temperature was 1300°C, carbon nanowires (CNWs), Co₂Si, Si₂N₂O, SiC and Si₃N₄ were in situ generated and the best electromagnetic wave (EMW) absorption performance was obtained. The minimum reflection loss reached−50.04 dB at 4.81 mm, and the effective absorption bandwidth broadened to 3.48 GHz (14.52–18 GHz) at 1.31 mm. The excellent EMW absorption performance mainly comes from the coexistence of multiple loss mechanisms, including the magnetic loss of Co₂Si, the conduction loss of CNWs, and the heterogeneous interfaces polarization between varieties of nanocrystals and amorphous ceramic matrix. By adjusting the sample thickness from 1 to 5 mm, the effective absorption of S1300 can cover the entire X and Ku bands, from 3.36 to 18 GHz. This study provides a simple way to synthesize high performance ceramic-based microwave absorbing materials.     

Electromagnetic wave absorption properties of polymer-derived magnetic carbon-rich SiCN-based composite ceramics

In this paper, the mixture of Fe and Ni nanoparticles (abbreviated as FeNi) was added to liquid polysilazane (PSZ) as a magnetic source, to prepare a series of magnetic carbon-rich SiCN-based composite ceramics by adjusting the mass ratio of FeNi through the polymer derivation method. The phase composition, microstructure, conductivity, electromagnetic wave (EMW) absorption performance and mechanism of composite ceramics prepared were discussed. The analysis shows that the introduction of magnetism has adjusted the impedance matching and improved the magnetic loss performance of composite ceramics on the whole, and the dielectric loss ability of composite ceramics has been strengthened benefiting from the formation of conductive path of CNTs precipitated by FeNi catalysis in the matrix. Therefore, the addition of magnetic particles improves the EMW absorption peak intensity and effective absorption bandwidth (EAB) of composite ceramics. When the addition amount of FeNi was 5 wt%, the sample 5# exhibited the best comprehensive EMW absorption performance: Its minimum reflection loss (RL_min) was ?18 dB and the EAB was 2.5 GHz when the thickness was 1 mm, the EAB covering the C, X and Ku bands can be obtained by adjusting the thickness from 1.0 mm to 4.0 mm. Through calculation, the EAB (EAB_tf) of 5# with a thickness of 1 mm and a filling rate of 1 wt% can reach 50, which is significantly higher than that of a series of SiCN-based composite ceramics previously reported. In addition, the density of 5# was 2.3 g/cm³, and its compressive strength (CS) can reach 337 MPa. The data shows that the composite ceramic 5# prepared in this experiment has the merits of light weight, excellent comprehensive EMW absorption performance and good compression resistance, and is expected to be one of the promising materials in the field of new-generation EMW absorbers.     

Hollow porous Ni@SiC nanospheres for enhancing electromagnetic wave absorption

Multi-component and a large number of non-homogeneous interface absorbers have been proven to be the preferred choice of electromagnetic wave (EMW) absorption materials. Herein, hollow porous Ni@SiC nanospheres (HPNS) were successfully constructed by combining a carbothermal reduction preparation strategy and subsequent electroless plating process. The heterogeneous dielectric/magnetic multi-component benefit to excellent EMW absorption properties through forming multiple polarizations, dielectric loss, and magnetic loss effects. Particularly, the HPNS at the optimal ratio with a low filler loading of 20 wt% exhibits the minimum reflection loss (RL_min) value of −62.39 dB at 13.28 GHz and the maximum effective absorption bandwidth (EAB_max) is up to 5.36 GHz (12.64–18 GHz), and the corresponding thin matching thicknesses are 1.96 mm and 1.80 mm, respectively. Furthermore, the maximum radar cross section (RCS) reduction of HPNS over PEC reaches 26.02 dB m² (1.96 mm) under far-field conditions, which means that the prepared HPNS is extraordinarily promising for practical applications. This work guides the preparation of high-performance EMW absorbers as well as radar stealth materials.     

Si3N4-BN-SiCN ceramics with unique hetero-interfaces for enhancing microwave absorption properties

SiCN-based ceramics with broadband and strong microwave absorption properties are desired for the structural and functional integration of ceramic matrix composites. The elemental composition and thermal expansion coefficients of the ceramics matrix crucially affect its microstructure and electromagnetic wave (EMW) absorption properties. BN layer with lower electrical conductivity and higher specific area, exhibits both the impedance matching characteristic and EMW attenuation in the process of multiple reflections, electrical conductivity loss, dipole polarization and interfacial polarization. Therefore, Si₃N₄-BN-SiCN ceramics, which were synthesized using chemical vapor infiltration (CVI) method, construct unique hetero-interface of Si₃N₄-BN, Si₃N₄–SiCN and BN-SiCN. Therefore, the Si₃N₄-BN-SiCN ceramics have outstanding EMW absorption performance and realize an effective absorption bandwidth (EAB) that covers the whole X band and the minimum reflection coefficient (RC) reaches -18.43 dB at a thickness of 3.37 mm.     

Hierarchical carbon nanowires network modified PDCs-SiCN with improved microwave absorption performance

In order to optimize the dielectric performance of polymer derived SiCN ceramics (PDCs-SiCN), carbon nanowires (CNW) were deposited in SiCN by catalytic chemical vapor deposition (CCVD). Microstructure evolutions, dielectric property and electromagnetic (EM) wave absorption capacity of CNW/SiCN were investigated. Results show that carbon nanowires had plentiful pits/defects on their roughened surface and formed hierarchical network in SiCN which benefited the impedance match and generated strong conductivity and polarization loss, enhancing the absorption ability of CNW/SiCN. When CNW accounted for 5.61 wt%, RC_min reached −51 dB with EAB of 3.0 GHz at 2.7 mm in thick, showing excellent microwave absorbing performance. The favorable microwave absorption ability could be ascribed to three aspects including enhanced conductivity loss derived from the excellent conductivity of CNW, polarization loss generated by defects, and multiple reflection loss enhanced by hierarchical network. By comparing the variation tendency between defect concentration and electrical conductivity in CNW/SiCN, it is rational to conclude that the conductivity loss dominated the dielectric loss while the polarization loss and repeated multi-reflection simultaneously worked. This work can be further extended to study regarding the effect of heat-treatment temperature since CNW have the potential to promote the crystallization process of amorphous PDCs thereby improving their dielectric properties.     

Enhanced electromagnetic wave absorption of Fe-doped silicon oxycarbide nanocomposites

Polymer-derived ceramics (PDCs), such as SiOC, SiCN, SiBCN, and SiC are considered the best candidates for designing high-performance microwave absorber due to their controllable structure, homogeneous element composition at atom level, tunable electromagnetic and electrochemical properties. Herein, Fe ions doped silicon oxycarbide (Fe ions-SiOC) ceramics have been successfully fabricated via solvothermal method. The electromagnetic absorption performances of the nanocomposites prove to be controllable via tailoring Fe ion contents. The Fe ions effectively enhance both the interfacial polarization of amorphous SiOC, and the dielectric properties of the nanocomposites but barely effect magnetic properties of the nanocomposite. As for 0.16 mol/L-SiOC ceramics annealed at 1450°C, the effective absorption bandwidth as high as 2.00 GHz and reflection loss of −59.60 dB at 5.40 GHz with the thickness of 4.55 mm are obtained. Such work opens up a novel and simple route to scale up the PDC-based materials with broadband and excellent microwave absorbing performances.     

Preparation of SiCf/Si–O–C composites by impregnation pyrolysis of polysiloxane and its electromagnetic wave absorption properties

High-temperature structural electromagnetic wave (EMW) absorption materials are increasing in demand because they can simultaneously possess the functions of mechanical load-bearing, heatproof, and EMW absorption. Herein, SiC_f/Si–O–C composites were prepared by precursor impregnation pyrolysis using continuous SiC fibers needled felt as reinforcement and polysiloxane as a precursor, respectively. The phase composition, microstructure, complex permittivity, and EMW absorption properties of SiC_f/Si–O–C composites after annealing at various temperatures were investigated. The annealing at 1400–1500°C affects positively the EMW absorption performance of the composites, because the β-SiC microcrystals and SiC nanowires were generated by the activation of carbothermal reduction reaction in the composites, and the aspect ratio of SiC nanowires increased with the rise of temperature. The composites exhibit optimal EMW absorption performance, with the effective absorption bandwidth covering the entire X-band and the minimum reflection loss (RL_min) of −32.8 dB at 4.0 mm when the annealing temperature is raised to 1500°C. This is because that the impedance matching is improved as the rising of ε′ and decreasing of ε″ due to the conversion of free carbon in the composite into SiC nanowires.     

Microwave-absorption properties of SiOC ceramics derived from novel hyperbranched ferrocene-containing polysiloxane

In this contribution, we design a novel strategy to synthesize SiOC ceramics by pyrolysis of hyperbranched ferrocene-containing polysiloxane (HBPSO-VF) which are synthesized by the reaction of polysiloxane (PSO) with 1,1′-Bis(dimethylvinylsilyl)ferrocene (VF). This SiOC ceramics show much lower crystallization temperature because of the capability of HBPSO-VF to incorporate metallic iron into the backbone of PSO. The usage of HBPSO-VF offers enhanced ceramic yield of 83 wt% at 1200 °C due to the deep cross-linking of hydrosilylation. Nano-sized SiC and turbostratic carbons are separated from amorphous SiOC phase when it is annealed at 1100 °C, while crystallization temperature is 1400 °C when PSO is used as polymer precursors. The minimum reflection coefficient (RC_min) of this nanocrystal-containing ceramic reaches −46 dB, exhibiting a promising prospect as a kind of electromagnetic wave (EMW) absorbing materials. This method also can be further extended to develop other functional Si-based polymer derived ceramic (PDC) systems for EMW absorption and shielding applications.     

Enhanced electromagnetic absorption properties of Fe-doped Sc2Si2O7 ceramics

Doping transition metal elements in a crystal causes distortion and defects in the lattice structure, which change the electronic structure and magnetic moment, thereby adjusting the electrical conductivity and electromagnetic properties of the material. Fe-doped Sc₂Si₂O₇ ceramics were synthesized using the sol-gel method for application to microwave absorption. The effect of Fe-doped content on the electromagnetic (EM) and microwave absorption properties was investigated in the Ku-band (12.4–18 GHz). As expected, the dielectric and magnetic properties improve substantially with increasing Fe content. Fe doping causes defects and impurity levels, which enhance polarization loss and conductance loss, respectively. Fe replaces Sc atoms in the ScO₆ octahedral structure, creating a difference in spin magnetic moments, which increases the magnetic moment. Moreover, the magnetic coupling of Fe and O atoms occurs at the Fermi level, which benefits magnetic loss. In particular, when the Fe content is 6%, the fabricated Fe-doped Sc₂Si₂O₇ ceramics show an absorption property with absorption peaks located at 14.5 GHz and a minimum reflection loss (RL_min) of ?12.8 dB. Therefore, Fe-doped Sc₂Si₂O₇ ceramics with anti-oxidation and good microwave absorption performance have a greater potential for application in high-temperature and water-vapor environments.     

Electromagnetic wave absorption of inexpensive C/ZnO composites derived from zinc-based acrylate resins

Based on the abundant and low-cost zinc-based acrylate resins, C/ZnO composites were fabricated via one-step carbonization at 700 °C in a N₂ atmosphere for 2 h. Zinc-based acrylate resins, which were synthesized by free-radical polymerization of butyl acrylate (BA), acrylic acid (AA) and vinyl acetate (VAc) and dehydration condensation of Zn(OH)₂, provided a common source for carbon and ZnO. These materials demonstrate enhanced electromagnetic wave absorption (EMWA) behavior with tunable microwave absorption bands at 2–18 GHz, which is related to the molar ratio (mol%) of Zn(OH)₂ to acrylate monomers in zinc-based acrylate resins. Remarkably, the 0.11 mol% C/ZnO composite exhibits outstanding absorption properties: the minimum reflection loss (RL_min) at 16.7 wt% loading of −34.66 dB is observed at 3.0 mm and 10.32 GHz, and an RL_min of −24.83 dB is observed at a small thickness of 1.5 mm with an effective absorption bandwidth (EAB) of 3.61 GHz. Moreover, the EAB (RL ≤ −10 dB) from the C band to Ku band is achieved by simply adjusting the thickness of the absorbers, which are superior to the other hybrids of organic carbon and ZnO. These results provide a new strategy for the preparation of carbon-based composites containing metal oxides and their application in high-performance microwave absorption.     

Adjustable iron-containing SiBCN ceramics with high-temperature microwave absorption and anti-oxidation properties

Quaternary siliconboron carbonitride (SiBCN) ceramics show excellent high-temperature stability and oxidation resistance, indicating great potential as high-temperature electromagnetic (EM) wave absorbing materials. In this contribution, an efficient and facile method was developed to prepare bulk iron-containing SiBCN (Fe–SiBCN) ceramics with remarkable EM wave absorption at high temperature by pyrolyzing boron and iron containing precursors (PSZV-B–Fe). The introduction of boron and iron not only improves the high-temperature stability but also influences the complex permittivity and EM wave absorption. The minimum reflection coefficient (RC_min) is −61.05 dB, and the effective bandwidth absorption (EAB) is 3.35 GHz (9.05–12.4 GHz). The RC_min will be decreased to −52.3 dB at 600°C as well as the EAB covers more than 67% of the X band (2.8 GHz). The high-temperature stable Fe–SiBCN ceramics with adjustable dielectric properties can be utilized as high-performance EM wave-absorbing materials in high-temperature and harsh environments.     

Enhanced electromagnetic wave absorbing properties of Si-O-C ceramics with in-situ formed 1D nanostructures

The Si-O-C ceramics were prepared by polymer-derived ceramic method using polysiloxane/FeCl₃ as precursor with the FeCl₃ content of 1.0 wt%. The microstructure, dielectric properties, and electromagnetic wave (EMW) absorbing properties in X band of the Si-O-C ceramic were investigated. It was found that the pyrolysis temperature has a great influence on the amount of in-situ formed CNTs and the transformation from CNTs to 1D SiC nanostructures. With the temperature rising from 1000 to 1500°C, the SiC formed with various morphologies including SiC microspheres, needle-like SiC, and SiC nanowires which were transformed from CNTs. The EMW absorbing properties were dramatically improved when the pyrolysis temperature raised to 1500°C; the minimum reflection loss (RL) was −58.37 dB of sample with a thickness of 2.95 mm at 10.11 GHz, and the absorbing band (RL ≤−20 dB) of sample at a thickness of 3.0 mm covers 3.8 GHz (8.2-12.0 GHz), which means more than 99% of the EMW were absorbed. The enhancement of EMW absorbing properties of bulk Si-O-C ceramics was attributed to the interfacial polarization induced by in-situ heterogeneous nanostructures with complex interfaces.     

Microstructure and EMW absorption properties of CVI Si3N4–SiCN ceramics with BN interface annealed in N2 atmosphere

A kind of chemical vapor infiltration (CVI) Si₃N₄–BN–SiCN composite ceramic with excellent electromagnetic wave (EMW) absorbing properties is obtained by CVI BN interface and SiCN matrix on porous Si₃N₄ ceramics, and then annealed at high temperatures (1200°C‐1500°C) in N₂ atmosphere. The crystallization behavior, EMW absorbing mechanism and mechanical properties of the composite ceramics have been investigated. Results showed CVI SiCN ceramics with BN interface were crystallized in the form of nanograins, and the crystallization temperature was lower. Moreover, both EMW absorbing properties and mechanical properties of CVI Si₃N₄–BN–SiCN composite ceramics firstly increased and then decreased with the increase in annealing temperature due to the influence of BN interface on the microstructure and phase composition of the composite ceramics. The minimum reflection coefficient (RC) and maximum effective absorption bandwidth (EAB) of the composite ceramics annealed at 1300°C were ?47.05 dB at the thickness of 4.05 mm and 3.70 GHz at the thickness of 3.65 mm, respectively. The flexural strength and fracture toughness of the composite ceramics annealed at 1300°C were 94 MPa and 1.78 MPa/m^1/2, respectively.     

In-situ synthesis of ternary layered Y3Si2C2 ceramic on silicon carbide fiber for enhanced electromagnetic wave absorption

A novel ternary layered ceramic of Y₃Si₂C₂ was successfully in-situ synthesized on the surface of home-made third-generation KD-SA SiC fiber for the first time by molten salt method aimed at improving the electromagnetic wave (EMW) absorption. After in-situ synthesis of Y₃Si₂C₂ ceramic layer on SiC fiber (SiC_f/Y₃Si₂C₂), significantly improved EMW absorption performance was obtained. The minimum reflection loss (RL_min) of ?16.97 dB was reached in SiC_f/Y₃Si₂C₂ composites at the thickness of only 2.19 mm, and the effective absorption bandwidth (EAB) was up to 5.44 GHz (12.56–18 GHz) at a thin thickness of 2.64 mm. The improvement in EMW absorption of SiC_f/Y₃Si₂C₂ is mainly attributed to enhanced dielectric loss and conduction loss resulting from increased heterogeneous interfaces and multiple reflections and scattering originating from net structure. The SiC_f/Y₃Si₂C₂ could be a promising EMW absorber for application in high-performance EMW absorbing materials.     

Morphology-controlled preparation and tunable electromagnetic wave absorption performance of manganese dioxide nanostructures

The development of electromagnetic wave (EMW) absorption materials with lightweight, wide absorption bandwidth, thin thickness, and strong EMW absorption performance has become a hotspot. Herein, the morphology-controlled preparation of α-manganese dioxide (α-MnO₂) was successfully obtained via a facile hydrothermal method, and the EMW absorption performance of α-MnO₂ was investigated in detail. The results indicated the as-obtained Mn-1.0-120 possessed the best EMW absorption performance with minimum reflection loss of −53.43 dB at about 5.2 GHz with a thickness of 4.1 mm originated from the synergistic effects of multiply scattering, dielectric loss, and magnetic loss. This contribution demonstrates that the MnO₂ has promising candidates with a tunable EMW absorption performance for applications in the electromagnetic field in the future.