Cu2O quantum dots modified by RGO nanosheets for ultrasensitive and selective NO2 gas detection

Real-time monitoring of trace NO₂ emission has been an emerging challenge in environment and health sectors lately. Aiming to overcome this challenge, NO₂ gas sensors based on cuprous oxide quantum dots (Cu₂O QDs) anchored onto reduced graphene oxide (RGO) nanosheets serving as a sensitive layer were prepared in this report. Apart from a series of purposive measurements, various characterization techniques such as XRD, Raman, XPS and TEM were employed as well to assist the exploration of sensors performance to NO₂ gas. The experimental results revealed a 580% response enhancement for prepared RGO/Cu₂O sensors compared with pure RGO counterparts, as well as an excellent selectivity. In a specific experiment, the sensing response attained 4.8% and 29.3% toward 20 ppb and 100 ppb NO₂ respectively at 60 °C, which was larger than most Cu₂O based resistive gas sensors. Moreover, further subtle modulation of this RGO/Cu₂O nanocomposites led to a preferable room-temperature response of 37.8% toward 100 ppb NO₂, which also offered a favorable stability of 98.1% response retention after four exposures within ten days. The obtained results imply that the prepared RGO/Cu₂O QDs sensors possess a competitive capability of trace NO₂ detection.     

Investigation of improved dielectric and thermal properties of ternary nanocomposite PMMA/MXene/ZnO fabricated by in-situ bulk polymerization

Electric power system applications demand for high-temperature dielectric materials. The improved performance of polymer nanocomposites requires improvement in their thermal conductivity & stability, dielectric stability and processing technique. However, they often lose their dielectric properties with a rise in temperature. Here, we offer a solution by incorporating electrically conducting material (MXene) and semiconducting inorganic nanoparticles (ZnO NPs) into an insulating PMMA polymer matrix to maintain high dielectric constant, both at the room and high temperature. Therefore, to achieve desirable thermal and dielectric properties is the main objective of the present study based on the homogeneous distribution of the nanofillers by in-situ bulk polymerization assisted by strong sonication in the corresponding polymer. The introduction of MXene and ZnO NPs into the PMMA not only acquires a substantial increment in the dielectric constant, to attain a value 437, with minimum energy loss of 0.36 at 25 Hz, but also improves the thermal conductivity of PMMA up to 14 times by causing the reduction of thermal resistance, which is actually responsible for the poor thermal conductivity of amorphous pure PMMA polymer. More importantly, hybrid PMMA/4:2 wt% MXene:ZnO nanocomposite leads to an excellent thermal stability. Moreover, further characterization of the synthesized nanocomposites by FTIR, SEM and XRD leads to the evaluation of strong interaction of ternary components with PMMA matrix.     

Dielectric,thermal and mechanical properties of hybrid PMMA/RGO/Fe2O3 nanocomposites fabricated by in-situ polymerization

Currently, the organic-inorganic hybrid materials have gained tremendous importance due to their unique applications in different technological fields. In this connection, the chemical synthesis of poly(methyl methacrylate) (PMMA) and its binary and ternary nanocomposites by in-situ bulk polymerization with various percentages of reduced graphene oxide (RGO) and hematite nanoparticles (Fe₂O₃ NPs) is presented. Dielectric properties of binary and ternary nanocomposites are investigated in the frequency range of 25 Hz-1 MHz for each composition. Ternary nanocomposite of PMMA with RGO:Fe₂O₃ NPs (2:2 wt%) exhibits a substantial enhancement of the dielectric constant up to ≈308 and suppressed dielectric loss of 0.12 at 25 Hz. Appearance of three types of interfaces in ternary PMMA nanocomposites accounts for the superior dielectric properties due to the accumulation of greater number of charges at the interfaces as compared to the binary nanocomposites with only one interface. The same optimized ternary PMMA nanocomposite shows a remarkable improvement in the thermal conductivity (2.04 W/mK), which is attributed to the formation of efficient thermal conducting pathways contributed by the synergic reduction in thermal resistance of both RGO and Fe₂O₃ NPs (2:2 wt%) relative to the binary nanocomposites PMMA/2 wt% RGO (1.04 W/mK) and PMMA/2 wt% Fe₂O₃ (0.98 W/mK). Thus, ternary nanocomposites prove to be the excellent candidates for thermal management applications. Furthermore, a comparison of the mechanical strength and thermal stability for all the binary and ternary nanocomposites is presented. In the last section, respective precursors and optimized binary and ternary nanocomposites are characterized by XRD, FTIR and SEM which reveal the strong interaction of respective nanofillers into PMMA matrix.     

Room temperature operating sensitive and reproducible ammonia sensor based on PANI/hematite nanocomposite

ABSTRACT

A facile, ultra-sensitive, quickly recoverable, and room temperature operating ammonia sensor was developed by using polyaniline (PANI) and hematite (α-Fe₂O₃) hybrid nanocomposite. The hematite nanoparticles were obtained by template-free hydrothermal process. The PANI/α-Fe₂O₃ nanocomposite was synthesized by in situ chemical oxidative polymerization process of aniline in presence of α-Fe₂O₃ nanoparticles. The structural and morphological study and compositional analysis of PANI/α-Fe₂O₃ were performed by Fourier transform infrared spectroscopy, X-ray powder diffraction analysis, and scanning electron microscopy. The PANI/α-Fe₂O₃ sensor showed excellent reproducibility, ultra-fast response, and excellent sensitivity (46.72%) as compared to PANI (29.72%) sensor towards ammonia gas at room temperature.     

Enhanced NO2 gas sensor device based on supramolecularly assembled polyaniline/silver oxide/graphene oxide composites

Herein, we report a successful synthesis of supramolecularly assembled polyaniline/silver oxide/graphene oxide composite (PANI/Ag₂O/GO) for enhanced NO₂ gas sensing application. The PANI/Ag₂O/GO composite was synthesized by facile stirring followed by an ultrasonication process. The prepared material was characterized by different techniques such as x-ray diffraction, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy and Raman-scattering spectroscopy. The detailed analysis revealed that the average crystallite sizes of PANI/Ag₂O and PANI/Ag₂O/GO composites were found to be 37.37 nm and 41.55 nm, respectively. FESEM and TEM analysis showed coral-like rough-surfaced and extensively agglomerated morphology for PANI and ultrathin flexible sheet-like morphology for GO. Ag₂O nanoparticles with diameters 20–30 nm were well incorporated in the GO sheets and PANI matrix in the case of PANI/Ag₂O/GO composites. The synthesized materials were used to make resistive sensor devices that had a high response to NO₂ gas. The fabricated sensors were examined at various temperatures to obtain the optimal sensing temperature. The fabricated NO₂ gas sensor device based on PANI/Ag₂O/GO composite exhibited a highest sensitivity of 5.85 for 25 ppm at an optimized temperature (100 °C) as compared to the pure PANI (2.5) and PANI/Ag₂O composite (3.25). Further, the fabricated sensor device based on PANI/Ag₂O/GO composite was also examined at different NO₂ gas concentrations.     

C2H2 gas sensor based on Ni-doped ZnO electrospun nanofibers

Pure and Ni-doped ZnO nanofibers were synthesized using the electrospinning method. The morphology, crystal structure and optical properties of the nanofibers were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy, respectively. It is found that Ni doping does not change the morphology and crystal structures of the nanofibers, and the ultraviolet emissions of ZnO nanofibers present red shift with increasing Ni doping concentration. C₂H₂ sensing properties of the sensors based on the nanofibers were investigated. The results show that the C₂H₂ sensing properties of ZnO nanofibers are effectively improved by Ni doping, and 5 at% Ni-doped ZnO nanofibers exhibit a maximum sensitivity to C₂H₂ gas.