Preparation and electrical properties of Pb(Mg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>)O<Subscript>3</Subscript>-PbTiO<Subscript>3</Subscript> solid solutions

Ceramic samples of lead magnesium niobate (PMN) and (1 ? x)Pb(Mg_1/3Nb_2/3)O₃?xPbTiO₃ (PMN-PT) solid solutions with x = 0, 0.05, 0.10, and 0.30 have been prepared by solid-state reactions, and their structural, electrical, and piezoelectric properties have been studied using x-ray diffraction, Rietveld profile analysis, impedance spectroscopy, and the resonance/antiresonance method. The results indicate that the use of nonstoichiometric columbite niobates enables the synthesis of phase-pure PMN and PMN-PT.     

Synthesis and high-temperature heat capacity of Gd<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript>

Gd₂Sn₂O₇ gadolinium stannate with the pyrochlore structure has been prepared by solid-state reaction and its high-temperature heat capacity has been determined by differential scanning calorimetry in the temperature range 350–1020 K. The C_p(T) data are shown to be well represented by the classic Maier–Kelley equation. The experimental C_p(T) data have been used to evaluate the thermodynamic functions of gadolinium stannate: enthalpy increment H°(T)–H°(339 K), entropy change S°(T)–S°(339 K), and reduced Gibbs energy Ф°(Т).     

Structural and dielectric properties of PbMg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>O<Subscript>3</Subscript>-PbZrO<Subscript>3</Subscript> solid solutions synthesized at high pressures and temperatures

(1 ? x)PbMg_1/3Nb_2/3O₃ · xPbZrO₃ (1 ? x)PMN · xPZ) solid solutions have been synthesized at a pressure of 5 GPa and temperatures from 1300 to 1700 K, and their structural and dielectric properties have been studied. The composition dependences of the average unit-cell parameter and dielectric permittivity for the solid solutions indicate that the PMN-PZ system has a morphotropic phase boundary near x = 0.65. The solid solutions have a cubic structure for x < 0.65, a rhombohedral structure in the range 0.65 < x < 0.9, and an orthorhombic structure (similar to that of PbZrO₃) for x > 0.9. The temperature and frequency dependences of dielectric permittivity suggest that the (1 ? x)PMN · xPZ samples with x < 0.65 consist of two ferroelectric phases: a relaxor with antipolar dipole order and a normal ferroelectric with a diffuse phase transition. The effect of annealing temperature on the ferroelectric state of the samples with x < 0.65 is examined. In the composition range 0.65 < x < 0.9, the samples have normal ferroelectric properties, independent of annealing temperature.     

High-temperature heat capacity and thermodynamic properties of Tb<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript>

Tb₂Sn₂O₇ has been prepared by solid-state reaction in air at 1473 K over a period of 200 h and its isobaric heat capacity has been studied experimentally in the range 350–1073 K. The C _p(T) data for this compound have no extrema and are well represented by the classic Maier–Kelley equation. The experimental C _p(T) data have been used to evaluate the thermodynamic properties of terbium stannate (pyrochlore structure): enthalpy increment H°(T)–H°(350 K), entropy change S°(T)–S°(350 K), and reduced Gibbs energy Ф°(Т).     

Synthesis and x-ray diffraction study of solid solutions in the Zn<Subscript>2</Subscript>SnO<Subscript>4</Subscript>-Zn<Subscript>2</Subscript>TiO<Subscript>4</Subscript>-Zn<Subscript>2</Subscript>ZrO<Subscript>4</Subscript> system

The multicomponent refractory oxide system Zn₂(Ti_aSn_b)_{1 ? x} Zr_xO₄ (a + b = 1; a: b = 1: 5, 1: 4, 1: 3, 1: 2, 1: 1, 1: 0, 2: 1, 3: 1, 4: 1; x = 0?1.0; Δx = 0.05) has been studied by x-ray diffraction, using samples prepared by melting appropriate oxide mixtures in a low-temperature hydrogen-oxygen plasma. Two phases, both with wide homogeneity ranges, have been identified: α-phase, with a cubic inverse spinel structure, and β-phase, with a tetragonal spinel structure. The phase boundaries in the system have been determined. Structural data are presented for about 100 solid solutions of different compositions.     

Synthesis and High-Temperature Heat Capacity of Dy<Subscript>2</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript> and Ho<Subscript>2</Subscript>Ge<Subscript>2</Subscript>O<Subscript>7</Subscript>

The Dy₂Ge₂O₇ and Ho₂Ge₂O₇ pyrogermanates have been prepared by solid-state reactions in several sequential firing steps in the temperature range 1237–1473 K using stoichiometric mixtures of Dy₂O₃ (or Ho₂O₃) and GeO₂. The heat capacity of the synthesized germanates has been determined as a function of temperature by differential scanning calorimetry in the range 350–1000 K. The experimentally determined C _p (T) curves of the dysprosium and holmium germanates have no anomalies and are well represented by the Maier–Kelley equation. The experimental C _p (T) data have been used to evaluate the thermodynamic functions of the Dy₂Ge₂O₇ and Ho₂Ge₂O₇ pyrogermanates: enthalpy increment H°(T)–H°(350 K), entropy change S°(T)–S°(350 K), and reduced Gibbs energy Ф°(T).     

Effects of Ge<Superscript>4+</Superscript> acceptor dopant on sintering and electrical properties of (K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>)NbO<Subscript>3</Subscript> lead-free piezoceramics

Lead-free (K_0.5Na_0.5)(Nb_1-xGe _x )O₃ (KNN-xGe, where x = 0-0.01) piezoelectric ceramics were prepared by conventional ceramic processing. The effects of Ge⁴⁺ cation doping on the phase compositions, microstructure and electrical properties of KNN ceramics were studied. SEM images show that Ge⁴⁺ cation doping improved the sintering and promoted the grain growth of the KNN ceramics. Dielectric and ferroelectric measurements proved that Ge⁴⁺ cations substituted Nb⁵⁺ ions as acceptors, and the Curie temperature (T_C) shows an almost linear decrease with increasing the Ge⁴⁺ content. Combining this result with microstructure observations and electrical measurements, it is concluded that the optimal sintering temperature for KNN-xGe ceramics was 1020°C. Ge⁴⁺ doping less than 0.4 mol.%can improve the compositional homogeneity and piezoelectric properties of KNN ceramics. The KNN-xGe ceramics with x = 0.2% exhibited the best piezoelectric properties: piezoelectric constant d₃₃ = 120 pC/N, planar electromechanical coupling coefficient k_p = 34.7%, mechanical quality factor Q_m = 130, and tanδ = 3.6%.     

Phases and morphotropic regions in the PbNb<Subscript>2/3</Subscript> Mg<Subscript>1/3</Subscript>O<Subscript>3</Subscript>-PbTiO<Subscript>3</Subscript> system

Ceramic samples of solid solutions (1 ? x) PbNb_2/3Mg_1/3O₃ · xPbTiO₃ (0 ≤ x ≤ 1.0, Δx = 0.0025–0.05) are prepared by the columbite method. A detailed x?T phase diagram of the system is constructed (isothermal join at 25°C), and dielectric, piezoelectric, and elastic properties are investigated. It is established that the region of the morphotropic phase transition is positioned in the range 0.28 < x ≤ 0.43 and consists of a series of narrower regions. Inside one phase (cubic, rhombohedral, tetragonal), regions are found in which a qualitative and quantitative difference in structural and electrical parameters is observed. An interpretation of the observed effects in the context of the defect structure of the objects is suggested.     

Study of Magnetic Entropy Change in Nd<Subscript>0.67</Subscript>Ba<Subscript>0.33</Subscript>Mn<Subscript>0.98</Subscript>Fe<Subscript>0.02</Subscript>O<Subscript>3</Subscript> by Means of Theoretical Models

Magnetic entropy change (?ΔS _M ) of Nd_0.67 Ba_0.33Mn_0.98Fe_0.02O₃ perovskite have been analyzed by means of theoretical models. An excellent agreement has been found between the (ΔS_M) values estimated by Landau theory and those obtained using the classical Maxwell relation. In order to estimate the spontaneous magnetization M _{s pont}(T), we used the mean-field theory to analyses the (ΔS_M) vs. M ² data. The obtained M _{s pont}(T) values are in good agreement with those found from the classical extrapolation from the Arrott plots(H/M vs. M ²), confirming that the magnetic entropy is a valid approach to estimate the spontaneous magnetization in our system. At a relatively low magnetic field, a phenomenological model has been used to estimate the values of the magnetic entropy change. The results are in good agreement with those obtained from the experimental data using Maxwell relation.     

Critical Behavior of La<Subscript>0.67</Subscript>Ba<Subscript>0.33</Subscript>Mn<Subscript>0.95</Subscript>Fe<Subscript>0.05</Subscript>O<Subscript>3</Subscript> Manganite

The critical behavior of perovskite manganite La_0.67Ba_0.33Mn_0.95Fe_0.05O₃ at the ferromagnetic–paramagnetic has been analyzed. The results show that the sample exhibited the second-order magnetic phase transition. The estimated critical exponents derived from the magnetic data using various such as modified d’Arrott plot Kouvel–Fisher method and critical magnetization M(T _C, H). The critical exponents values for the La_0.67Ba_0.33Mn_0.95Fe_0.05O₃ are close to those expected from the mean field model β = 0.504 ± 0.01 with T _C = 275661 ± 0.447 (from the temperature dependence of the spontaneous magnetization below T _C ), γ = 1.013 ± 0.017 with T _C = 276132 ± 0.452 (from the temperature dependence of the inverse initial susceptibility above T _C ), and δ = 3.0403 ± 0.0003. Moreover, the critical exponents also obey the single scaling equation of M(H, ε) = |ε| ^β f _±(H/|ε| ^β+γ ).     

Electrical and thermodynamic properties of Cs<Subscript>0.97</Subscript> Rb<Subscript>0.03</Subscript>H<Subscript>2</Subscript>PO<Subscript>4</Subscript>

The transport properties of Cs_0.97Rb_0.03H₂PO₄ have been studied using polycrystalline samples and single crystals. The mixed salt is isostructural with cesium dihydrogen phosphate and has slightly smaller unitcell parameters. The cation substitution increases the low-temperature ionic conductivity of the material by about two orders of magnitude but has an insignificant effect on the conductivity of the high-temperature phase. The low-temperature conductivity of single-crystal samples exhibits significant anisotropy, with σ _a < σ _b±c . The conductivity of the polycrystalline material is close to σ _b±c . The substitution reduces the temperature of the superionic phase transition by 20°C and enhances the thermal stability of the high-temperature phase at low humidity (1 mol % H₂O).     

Structure and electrical properties of MnO doped (Ba<Subscript>0.96</Subscript>Ca<Subscript>0.04</Subscript>)(Ti<Subscript>0.92</Subscript>Sn<Subscript>0.08</Subscript>)O<Subscript>3</Subscript> lead free ceramics

In this work, (Ba_0.96Ca_0.04)(Ti_0.92Sn_0.08)O₃–xmol MnO (BCTS–xMn) lead-free piezoelectric ceramics were fabricated by the conventional solid-state technique. The composition dependence (0 ≤ x ≤ 3.0 %) of the microstructure, phase structure, and electrical properties was systematically investigated. An O–T phase structure was obtained in all ceramics, and the sintering behavior of the BCTS ceramics was gradually improved by doping MnO content. In addition, the relationship between poling temperature and piezoelectric activity was discussed. The ceramics with x = 1.5 % sintering at temperature of 1330 °C demonstrated an optimum electrical behavior: d ₃₃ ~ 475 pC/N, k _p ~ 50 %, ε _r ~ 4060, tanδ ~ 0.4 %, P _r ~ 10.3 μC/cm², E _c ~ 1.35 kV/mm, T _C ~ 82 °C, strain ~0.114 % and \(d_{33}^{*}\) ~ 525 pm/V. As a result, we achieved a preferable electric performance in BaTiO₃-based ceramics with lower sintering temperature, suggesting that the BCTS–xMn material system is a promising candidate for lead-free piezoelectric ceramics.     

Compounds WAl<Subscript>4</Subscript>, WAl<Subscript>3</Subscript>, W<Subscript>3</Subscript>Al<Subscript>7</Subscript>, and WAl<Subscript>2</Subscript> and Al-W-N combustion products

X-ray diffraction data are presented for combustion products in the Al-W-N system. New, nonequilibrium intermetallic compounds have been identified, their diffraction patterns have been indexed, and their unit-cell parameters have been determined. The phases α-and β-WAl₄ are shown to exist in three isomorphous forms, differing in unit-cell centering. The phases α′-, α″-, and α?-WAl₄ are monoclinic, with a ₀ = 5.272 Å, b ₀ = 17.770 Å, c ₀ = 5.218 Å, β = 100.10°; point groups C12/c1, A12/n1, I12/a1, respectively. The phases β′-, β″-, and β?-WAl₄ are monoclinic, with a ₀ = 5.465 Å, b ₀ = 12.814 Å, c ₀ = 5.428 Å, β = 105.92°; point groups A112/m, B112/m, I112/m, respectively. The compounds WAl₂ and W₃Al₇, identified each in two isomorphous forms, differ in cell metrics (doubling) but possess the same point group: P222. WAl ₂ ^′ : orthorhombic, a ₀ = 5.793 Å, b ₀ = 3.740 Å, c ₀ = 6.852 Å. WAl ₂ ^″ : orthorhombic, a ₀ = 11.586 Å, b ₀ = 3.740 Å, c ₀ = 6.852 Å. W₃Al ₇ ^′ : orthorhombic, Pmm2, a ₀ = 6.225 Å, b ₀ = 4.806 Å, c ₀ = 4.437 Å. W₃Al ₇ ^″ : orthorhombic, Pmm2, a ₀ = 12.500 Å, b ₀ = 4.806 Å, c ₀ = 8.874 Å. The new phase WAl₃: triclinic, P1, a ₀ = 8.642 Å, b ₀ = 10.872 Å, c ₀ = 5.478 Å, α = 104.02°, β = 64.90°, γ = 107.15°.     

Solid-state reactions in the system Li<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Na<Subscript>2</Subscript>CO<Subscript>3</Subscript>-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript>

The formation mechanisms of Li _x Na_{1 ?x} Ta _y Nb_{1 ? y} O₃ perovskite solid solutions in the Li₂CO₃-Na₂CO₃-Nb₂O₅-Ta₂O₅ system have been studied by x-ray diffraction, differential thermal analysis, thermogravimetry, IR spectroscopy, and mass spectrometry at temperatures from 300 to 1100°C. The results indicate that the synthesis of Li _x Na_{1 ? x} Ta _y Nb_{1 ? y} O₃ solid solutions involves a complex sequence of consecutive and parallel solid-state reactions. An optimized synthesis procedure for Li _x Na_{1 ? x} Ta _y Nb_{1 ? y} O₃ solid solutions is proposed.     

Thermodynamic Properties of FeNb<Subscript>2</Subscript>O<Subscript>6</Subscript> and FeTa<Subscript>2</Subscript>O<Subscript>6</Subscript>

Empirical calculational approaches have been used to evaluate the enthalpy, entropy, heat capacity, and melting point of iron(II) niobate and iron(II) tantalate and the coefficients A, B, and C in an equation for the temperature dependence of their heat capacity. The melting point of FeTa₂O₆ has been experimentally determined to be 1891 ± 5 K. The calculated heat capacity (C°_p (298.15 K)) of iron tantalate and the Gibbs energies of formation of FeN₂O₆ and FeTa₂O₆ have been compared to previously reported data.     

High-temperature heat capacity and vibrational spectra of Eu<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript>

The Eu₂Sn₂O₇ compound has been prepared by solid-state reaction (by sequentially firing a stoichiometric mixture of Eu₂O₃ and SnO₂ in air at 1273 and 1473 K) and its heat capacity has been determined by differential scanning calorimetry in the temperature range 370–1000 K. The heat capacity data have been used to evaluate the thermodynamic properties of europium stannate: enthalpy increment H°(T)–H°(370 K), entropy change S°(T)–S°(370 K), and reduced Gibbs energy Ф°(T). Raman spectra of Eu₂Sn₂O₇ polycrystals with the pyrochlore structure have been measured in the range 200–1200 cm^–1.     

Phase relations in the Ag<Subscript>8</Subscript>SnS<Subscript>6</Subscript>-Ag<Subscript>2</Subscript>SnS<Subscript>3</Subscript>-AgBr system and crystal structure of Ag<Subscript>6</Subscript>SnS<Subscript>4</Subscript>Br<Subscript>2</Subscript>

The T-x phase diagram of the Ag-Sn-S-Br system has been studied in the composition region Ag₈SnS₆-Ag₂SnS₃-AgBr, and a compound of composition Ag₆SnS₄Br₂ has been identified. Ag₆SnS₄Br₂ has a new structure, closely related to that of Ag₆GeS₄Br₂: sp. gr. Pnma, a = 6.67050(10), b = 7.82095(9), c = 23.1404(3) Å, Z = 4, R _B = 0.0519, R _wp = 0.0782, χ² = 1.36.     

New,thermally stable Gd<Subscript>11</Subscript>(GeO<Subscript>4</Subscript>)(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>O<Subscript>10</Subscript>-based upconversion phosphors

A series of Gd_11–x–y Yb _x Er _y GeP₃O₂₆ germanate phosphates differing in the ratio of the Yb³⁺ and Er³⁺ active ions have been synthesized, and their luminescence spectra have been measured. According to X-ray diffraction characterization results, all of the synthesized germanate phosphates are single-phase and have a triclinic structure (sp. gr. P1). We have measured upconversion luminescence spectra due to the Er^{3+ 2}H_11/2, ⁴S_3/2 → ⁴I_15/2 and ⁴F_9/2 → ⁴I_15/2 radiative transitions in the synthesized gadolinium ytterbium erbium germanate phosphates and determined the luminescence upconversion energy yield (B _en) in Gd_11–x–y Yb _x Er _y GeP₃O₂₆. The effects of the concentrations and ratio of the dopants in the Gd₁₁(GeO₄)(PO₄)₃O₁₀ germanate phosphate host on B _en and the ratio of the luminescence intensities in the red and green spectral regions (R/G) have been assessed.     

Synthesis and structure of the CsSmP<Subscript>4</Subscript>O<Subscript>12</Subscript> cyclotetraphosphate (cubic CsNdP<Subscript>4</Subscript>O<Subscript>12</Subscript> structure)

CsSmP₄O₁₂ crystals have been prepared at 300°C in molten polyphosphoric acids containing Cs, Mg, and Sm cations, and their crystal structure has been determined: sp. gr. I \(\bar 4\) 3d, a = 15.1225(8) Å, Z = 12, CsNdP₄O₁₂ structure.     

Properties of fluorine-doped PbMg<Subscript>1/3</Subscript>Nb<Subscript>2/3</Subscript>O<Subscript>3</Subscript> ceramics

We report the first fluorine doping of lead magnesium niobate in the PbMg _{(1 + x)/3}Nb_{(2 ? x)/3}O_{3 ? x} F _x system in a wide composition range, x = 0.025 to 0.625. The fluorine content of the samples is shown to be substantially lower than the intended one because of the fluorine volatilization in the form of HF during synthesis and sintering in air. The ceramics consist of magnesium and lead oxides undetectable by x-ray diffraction, and a perovskite phase whose composition can be represented by the formula PbMg_{(1 + m)/3}Nb_{(2 ? m)/3}O_{3 ? m} F _m , where the fluorine content after sintering is m ≤ 0.12. The PbO and MgO contents of the ceramics depend on the starting mixture composition (x) and heat-treatment conditions (hydrogen fluoride and lead oxide volatilization). As a result of the low fluorine content, the diffraction patterns of the samples show no superlattice reflections, and their lattice parameter varies insignificantly with x. Data are presented on the temperaturedependent dielectric permittivity of ceramic samples sintered and annealed under different conditions.