Sintering and electrical properties of La-modified (Na0.52K0.45Li0.03)1−3xLax(Nb0.88Sb0.09Ta0.03)O3 lead-free ceramics

(Na_0.52K_0.45Li_0.03)_1−3xLa_x(Nb_0.88Sb_0.09Ta_0.03)O₃ (NKLL_xNST) lead-free ceramics were prepared by normal sintering and their dielectric and piezoelectric properties were investigated. The X-ray methods indicate that the NKLL_xNST ceramics with x≤0.003 present a pure perovskite phase at room temperature. The bulk density of NKLL_xNST ceramics increases with proper amount of La₂O₃ contents, and reaches its highest value of 4.544 g/cm³ with the addition of 0.3 mol% La₂O₃. At x=0.003, remnant polarization P_r, piezoelectric constant d₃₃ and planar mode electromechanical coupling factor k_p of NKLL_xNST ceramics reach the highest values of 37.80 μC/cm², 346 pC/N and 40%, respectively, exhibiting excellent “soft” piezoelectric characteristics, demonstrating a tremendous potential of the compositions studied for device applications.     

Synthesis and negative thermal expansion property of Y2−xLaxW3O12 (0≤x≤2)

Y_2−xLa_xW₃O₁₂ solid solutions were successfully synthesized by the solid state reaction method. The microstructure, hygroscopicity and thermal expansion property of the resulting samples were investigated by X-ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FESEM) and thermal mechanical analysis (TMA). Results indicate that the structural phase transition of the Y_2−xLa_xW₃O₁₂ changes from orthorhombic to monoclinic with increasing substituted content of lanthanum. The pure phase can form for 0≤x≤0.4 with orthorhombic structure and for 1.5≤x≤2 with monoclinic one. High lanthanum content leads to a low relative density of Y_2−xLa_xW₃O₁₂ ceramic. Thermal expansion coefficients of the Y_2−xLa_xW₃O₁₂ (0≤x≤2) ceramics also vary from −9.59×10⁻⁶ K⁻¹ to 2.06×10⁻⁶ K⁻¹ with increasing substituted content of lanthanum. The obtained Y_0.25La_1.75W₃O₁₂ ceramic shows almost zero thermal expansion and its average linear thermal expansion coefficient is −0.66×10⁻⁶ K⁻¹ from 103 °C to 700 °C.     

Effect of La-doping on the properties of CaCu3Ti4O12 dielectric ceramics

Nano-size Ca_1−χLa_2χ/3Cu₃Ti₄O₁₂ (χ = 0.00, 0.05, 0.10, 0.15 and 0.20) precursor powders were prepared via the sol–gel method and the citrate auto-ignition route and then processed into micro-crystal Ca_1−χLa_2χ/3Cu₃Ti₄O₁₂ ceramics under heat treatment. Characterization of the as-obtained ceramics with XRD and SEM showed an average grain sizes of ∼1–2 μm, indicating La³⁺ amount to have little impact on grain size. The room-temperature dielectric constant of the Ca_1−χLa_2χ/3Cu₃Ti₄O₁₂ ceramics sintered at 1000 °C was of the order of 10³–10⁴ despite the variation of χ values. Compared with CaCu₃Ti₄O₁₂, La³⁺-doped CaCu₃Ti₄O₁₂ showed a flatter dielectric constant curve related to frequency. It was found that the loss tangent of the Ca_1−χLa_2χ/3Cu₃Ti₄O₁₂ ceramics was less than 0.20 in ∼600–10⁵ Hz region, which rapidly decreased to a minimum value of 0.03 by La³⁺doping with χ = 0.05. Our measurement of the ceramics conductivities (σ) also indicated that the appropriate introduction of La³⁺ into CaCu₃Ti₄O₁₂ would distinctly result in its dielectric properties.     

Structure,magnetic and electrical transport properties of the perovskites Sm1−xCaxFe1−xMnxO3

The structure of series Sm_1−xCa_xFe_1−xMn_xO₃ (0.0 ≤ x ≤ 1.0) compounds was investigated. The lattice parameters increase with coupled substitution Sm³⁺ by Ca²⁺ and Mn⁴⁺ for Fe³⁺. The variation of parameter, c, is larger than that of a and b, respectivly. The detailed analysis of magnetic properties of series Sm_1−xCa_xFe_1−xMn_xO₃ (0.1 ≤ x ≤ 0.9) shows that local magnetic interaction between Fe³⁺ and Fe³⁺ and Mn⁴⁺ and Mn⁴⁺ at below magnetic transition temperature is antiferromagnetic. Above magnetic transition temperature the presence of large magnetic cluster is proposed and the sizes of magnetic clusters decrease with Mn⁴⁺. The electrical transport behaviors related with small polaron hopping and variable range hopping models.     

Enhanced ferroelectric properties in (Ba1−xCax)(Ti0.94Sn0.06)O3 lead-free ceramics

Lead-free (Ba_1−xCa_x)(Ti_0.94Sn_0.06)O₃ (BCST) (x = 0.01-0.04) ceramics were prepared using a solid-state reaction technique. The effects of Ca content on the phase structure and electrical properties of the BCST ceramics were investigated. High piezoelectric coefficient of d₃₃ = 440 pC/N, planar electromechanical coupling factor of k_p = 45% and dielectric constant ?_r = 6900 were obtained for the samples at x = 0.03. At room temperature, a polymorphic phase transition (PPT) from orthorhombic phase to tetragonal phase was identified in the composition range of 0.02 < x < 0.04.     

Structure,dielectric and optical properties of Bi1.5+xZnNb1.5O7+1.5x pyrochlores

Non-stoichiometric pyrochlore ceramics with formula Bi_1.5+xZnNb_1.5O_7+1.5x were systematically investigated. Crystal structures of the compounds were studied by X-ray diffraction (XRD) technique. The structures were identified as pure cubic pyrochlores when |x| < 0.1. Dielectric and optical properties of the compositions when x = −0.1, 0 and 0.1 were studied. All samples have high resistivities and low dielectric loss. With increasing x in Bi_1.5+xZnNb_1.5O_7+1.5x, the lattice constant, permittivity, temperature coefficient of permittivity and thermal expansion coefficient increased, while dielectric loss decreased. Raman spectra indicated that the intensity of Bi–O stretching become stronger with increasing x. A vibration mode emerging at 861 cm⁻¹ when x = −0.1 means that the B–O coordination environment is significantly more disordered. Absorption spectra suggested that the bandgap energy become lower from 2.86 to 2.70 eV as lattice constants increased. Strong absorption occurs at wavelengths from 433 to 459 nm, shows that samples have the ability to respond to wavelengths in the visible light region.     

High energy-storage properties of [(Bi1/2Na1/2)0.94 Ba0.06] La(1−x) ZrxTiO3 lead-free anti-ferroelectric ceramics

Energy-storage properties of [(Bi_1/2Na_1/2)_0.94Ba_0.06]La_(1−x)Zr_xTiO₃ (BNT-BLZT, x=0, 0.02, 0.04, and 0.06) lead-free anti-ferroelectric ceramics fabricated via the conventional sintering technique were first investigated. Calculation from the X-ray diffraction results reveals that BNT-BLZT ceramic possesses a single perovskite structure phase. In addition, the P–E hysteresis loops measured at room temperature show that the BNT-BLZT (x=0.02) ceramics obtain the maximum P value of 37.5 μC/cm² and the largest energy-storage density W_max is 1.58 J/cm³. The temperature dependence of dielectric permittivity ε_r and dielectric loss tanδ illustrate that the addition of Zr can improve the piezoelectric properties of BT-BLZT ceramics. These properties indicate that BNT-BLZT ceramics might be a promising lead-free anti-ferroelectric material for energy storage application.     

Enhancement of the dielectric,piezoelectric, and ferroelectric properties in BiYbO3-modified (Ba0.85Ca0.15)(Ti0.9Zr0.1)O3 lead-free ceramics

Lead-free (1−x)(Ba_0.85Ca_0.15)(Ti_0.9Zr_0.1)O₃−xBiYbO₃ [(1−x)BCTZ−xBYO] piezoelectric ceramics in the range of BYO concentrations were prepared by the conventional oxide-mixed method, and the effect of BYO content on their microstructure, crystalline structure, density and electrical properties was investigated. A dense microstructure with large grain was obtained for the ceramics with the addition of BYO. The ceramics with x=0.1% exhibit an optimum electrical behavior of d₃₃~580 pC/N, r~10.9 Ω, k_p~56.4%, and tan δ~1.12% when sintered at a low temperature of ~1350 °C. When the measuring electric field is 40 kV/cm, the well-saturated and square-like P–E loops for the ceramics were observed with P_r~12.2 μC/cm² and E_c~1.83 kV/cm.     

Magnetic and magnetoresistive properties of La0.65−xEuxSr0.35MnO3

Eu-doped perovskites La_0.65−xEu_xSr_0.35MnO₃ (0.05 ≤ x ≤ 0.30) were synthesized by sol–gel method using citric acid and characterized by X-ray diffraction, magnetization, resistivity and magnetoresistance (MR) experiments. All samples had a single hexagonal perovskite structure. As x increased from 0.05 to 0.30, the Curie temperature T_C for the samples decreased from 352 to 242 K. It was found that two transition points appeared when the resistivity changed with increasing temperature, and upon an application of a magnetic field of 20 kOe the maximum magnetoresistivity of 18% for the La_0.65−xEu_xSr_0.35MnO₃ with x = 0.20 was obtained at room temperature 300 K. The mechanism of the transitions for the samples was explored.     

Electrical properties of niobium doped Bi4Ti3O12-SrBi4Ti4O15 intergrowth ferroelectrics

Nb-doped Bi₄Ti₃O₁₂-SrBi₄Ti₄O₁₅ intergrowth ceramics have been prepared by modified oxalate route. XRD phase analysis confirmed the formation of single phase compound. Nb-doping does not affect the basic crystal structure of the intergrowth. SEM micrographs showed that the grain size of the ceramics decreases with Nb-doping. The temperature dependence of dielectric constant and losses was investigated in the temperature range 30–800 °C and frequency range 1 kHz–1 MHz. With Nb-doping, the T_c of the ferroelectrics reduces and peak permittivity increases. Doping also introduces small relaxor behavior in the ferroelectrics. The dc conductivity of the ceramics decreases with doping. The remnant polarization (P_r) of the intergrowth ferroelectrics is increased with Nb doping.     

Synthesis and photoluminescence properties of La1−xAlO3:xTb green phosphors for white LEDs

Tb³⁺-doped La_1−xAlO₃ phosphor powders are successfully synthesized by the solution combustion method, using citric acid as the combustion fuel. The crystal structure and photoluminescence properties of La_1−xAlO₃:xTb³⁺ phosphors are studied, depending on Tb³⁺ content. The strongest emission peak is found at 543 nm, which originates from the ⁵D₄→⁷F₅ transition of Tb³⁺ ions, indicating green emission. Among the fabricated phosphors, the La_0.9AlO₃:0.1Tb³⁺ phosphor emits the strongest green light. The excellent luminescent properties make it a possible candidate for white light-emitting diodes and various photonic applications.     

Effect of Eu doping on structure and electrical properties of lead-free (Bi0.5Na0.5)0.94Ba0.06TiO3 ceramics

Eu-doped (Bi_0.5Na_0.5)_0.94Ba_0.06TiO₃ (BNBT6-xEu, x=0.00–2.00 at%) lead-free piezoelectric ceramics have been synthesized by the solution combustion method. The effect of Eu doping concentration on the phase structure, microstructure and electrical properties of BNBT6 ceramics has been investigated. The XRD analysis confirms that the europium additive incorporates into the BNBT6 lattice and results in a phase transition from the coexistence of rhombohedral and tetragonal phases to a more symmetric pseudocubic phase. The SEM images indicate that the europium additive has little effect on the ceramic microstructure and the average grain size is about 2.0 μm. The electrical properties of BNBT6 ceramics can be improved by appropriate Eu doping. The 0.25 at% Eu doped BNBT6 ceramic presents excellent electrical properties: piezoelectric constant d₃₃=149 pC/N, remnant polarization P_r=40.27 μC/cm², coercive field E_c=2.95 kV/mm, dielectric constant ε_r=1658 and dissipation factor tan δ=0.0557 (10 kHz).     

Electrical conductivity and redox stability of La2Mo2−xWxO9 materials

A series of compounds La₂Mo_2−xW_xO₉ (x = 0-2) were synthesized using a freeze-dried precursor method at relatively low temperatures (673-823 K). These materials were characterised by thermogravimetric and differential thermal analysis (TG/DTA), differential scanning calorimetric (DSC), X-ray diffraction (XRD), and transmission electron microscopy (TEM) and dilatometric measurements. Oxygen stoichiometry was evaluated by coulometric titration and thermogravimetric analysis at 873-1273 K. The ionic and electronic conductivities of these materials were analysed by impedance spectroscopy and a Hebb-Wagner ion-blocking method under moderately reducing conditions. The presence of W⁶⁺ leads to an increase of the stability range (about 10⁻¹⁶ Pa for La₂Mo_0.5W_1.5O₉ at 1073 K) and prevents oxygen loss and amorphisation. Within the stability range, the electronic conductivity increases gradually as the temperature increases and as the oxygen partial pressure reduces. This indicates that the electronic transport is mainly n-type as a result of the oxygen-content decreasing in the molybdate lattice. Further reduction of the oxygen partial pressure gave rise to the decomposition of La₂Mo_2−xW_xO₉, leading to the formation of new phases with molybdenum in lower oxidation states, which further enhances the electronic conductivity. The results of the coulometric titration and the thermogravimetric studies under a dry 5% H₂/Ar flow suggest that tungsten doped lanthanum molybdate materials can be used as electrolyte only at low temperature and under moderate reducing conditions.     

Dielectric properties of Sm, Nd and Fe doped Bi1.5Zn0.92Nb1.5O6.92 pyrochlores

New pyrochlore ceramics have been produced by doping Sm and Nd into the Bi site and Fe into the Nb site in the Bi_1.5Zn_0.92Nb_1.5O_6.92 (BZN) pyrochlore. Doped pyrochlore ceramics were produced by conventional solid state mixing of oxides at different doping levels using the compositions of Bi_1.5−xSm_xZn_0.92Nb_1.5O_6.92, Bi_1.5−xNd_xZn_0.92Nb_1.5O_6.92 and Bi_1.5Zn_0.92Nb_1.5−xFe_xO_6.92−x. The solubility limit of cations was determined as x = 0.13, 0.18 and 0.15 for Sm, Nd and Fe, respectively. While Sm and Nd increased the dielectric constant (?), Fe doping led a decrease in ?. Dielectric constant of Sm and Nd doped BZN increased to 199 at x = 0.13 (Sm) and to 219 at x = 0.18 (Nd). At low Fe dopings (x = 0.05), the dielectric constant of BZN increased to 242 but decreased to 211 at x = 0.15. The dielectric losses were lower for Sm and Nd dopings than Fe but in all cases it was lower than 0.006. The dielectric constant of Sm, Nd and Fe doped BZN ceramics was nearly independent of frequency within the frequency range between 1 kHz and 2 MHz, but decreased considerably with temperature between 20 and 200 °C. Temperature coefficient of Sm doped BZN (−354 ppm/°C) was lower than Nd and Fe doped BZN ceramics at solubility limits (−538 ppm/°C for Nd and −565 ppm/°C for Fe).     

Solubility limits and microwave dielectric properties of Ba6−3xSm8+2xTi18O54 solid solution

Upper and lower solubility limits in Ba_6−3xSm_8+2xTi₁₈O₅₄ tungsten bronze ceramics were determined by Rietveld refinement of XRD data combined with backscattered electron images, and the variation tendency of microwave dielectric characteristics was also investigated. The upper solubility limit was confirmed as x = 2/3, while the lower solubility limit was determined as 1/4 instead of the previously reported one x = 3/10. The dielectric constant of Ba_6−3xSm_8+2xTi₁₈O₅₄ ceramics decreases monotonically with increasing x, while the small temperature coefficient of resonant frequency with complex variation tendency is observed for the compositions 1/2 ≤ x ≤ 4/5. The Qf value increases at first, reaches the maximum around x = 2/3, and turns to decrease for x > 7/10.     

Y doping and grain size co-effects on the electrical energy storage performance of (Pb0.87Ba0.1La0.02) (Zr0.65Sn0.3Ti0.05)O3 anti-ferroelectric ceramics

(Pb_0.87Ba_0.1La_0.02) (Zr_0.65Sn_0.3Ti_0.05)O₃+x mol% Y (PBLZST-x, x=0–1.25) anti-ferroelectric (AFE) ceramics have been prepared by the solid-state reaction process, and the effect of Y-doping on the microstructure and electrical properties has been investigated. When the Y content increases from 0 mol% to 1.25 mol%, the average grain size of the PBLZST ceramics decreases by more than 3 times (from 4.7 μm to 1.5 μm). The doping and grain size co-effects lead to a significant increase in the AFE-to-FE and FE-to-AFE phase transition electric field (E_F and E_A), and result in a decrease in the width of the double hysteresis loops. As the Y content increases from 0 mol% to 0.75 mol%, the E_F increases from 53 KV/cm to 83 KV/cm and the E_A increases from 35 KV/cm to 72 KV/cm. The large recoverable energy density of 2.75 J/cm³ and the high energy efficiency of 71.5% can be achieved when 0.75 mol% Y is doped. The results indicate that Y-doping is an effective method to modulate the average grain size and improve the energy storage performance of the PBLZST anti-ferroelectric ceramics.     

Structural and optical properties of Tm:Y2O3 transparent ceramic with La2O3, ZrO2 as composite sintering aid

The paper reports the use of La₂O₃ and ZrO₂ co-doping as a composite sintering aid for the fabrication of Tm:Y₂O₃ transparent ceramics. Two groups of experiments were conducted for investigating the influences of composite sintering aids on the microstructures and the optical properties of Tm:Y₂O₃ transparent ceramics in contrast to single La³⁺ and single Zr⁴⁺ doped Tm:Y₂O₃. Samples with composite sintering aids could realize fine microstructures and good optical properties at relatively low sintering temperatures. Grain sizes around 10 μm and transmittances close to theoretical value at wavelength of 2 μm were achieved for the 9 at.% La³⁺, 3 at.% Zr⁴⁺ co-doped samples sintered at 1500-1600 °C. The influences of the composite sintering aids on the emission intensities and the phonon energies of Tm:Y₂O₃ ceramics were also investigated.     

Structure,dielectric and piezoelectric properties of Ba0.90Ca0.10Ti1−xSnxO3 lead-free ceramics

Lead-free piezoelectric ceramics Ba_0.90Ca_0.10Ti_1−xSn_xO₃ have been prepared by a conventional ceramic fabrication technique and the effects of Sn⁴⁺ on the structure, dielectric and piezoelectric properties of the ceramics have been investigated. All the ceramics exhibit a pure perovskite structure. After the substitution of Sn⁴⁺, the crystal structure of ceramics is transformed gradually from a tetragonal to an orthorhombic phase, and becomes a pseudo-cubic phase at x≥0.14. The substitution also decreases the Curie temperature greatly from 138 °C at x=0 to 33 °C at x=0.12, and shifts the orthorhombic–tetragonal phase transition to higher temperatures. Coexistence of the orthorhombic and tetragonal phases is formed in the ceramic at x=0.10, leading to significant improvements in the piezoelectric properties: d₃₃=521 pC/N and k_p=45.5%. Our results also reveal that the ceramics sintered at higher temperatures contain larger grains, and thus exhibit more noticeable tetragonal–orthorhombic phase transition and enhanced ferroelectric and piezoelectric properties.     

Preparation, characterization and electrical conductivity studies of NdYb1−xGdxZr2O7 (0 ≤ x ≤ 1.0) ceramics

Several compositions of NdYb_1−xGd_xZr₂O₇ (0 ≤ x ≤ 1.0) ceramics were prepared by pressureless-sintering method at 1973 K for 10 h in air. The relative density, microstructure and electrical conductivity of NdYb_1−xGd_xZr₂O₇ ceramics were analyzed by the Archimedes method, X-ray diffraction, scanning electron microscopy and impedance plots measurements. NdYb_1−xGd_xZr₂O₇ (0 ≤ x ≤ 0.3) ceramics have a single phase of defect fluorite-type structure, and NdYb_1−xGd_xZr₂O₇ (0.7 ≤ x ≤ 1.0) ceramics exhibit a single phase of pyrochlore-type structure; however, the NdYb_0.5Gd_0.5Zr₂O₇ composition shows mixed phases of both defect fluorite-type and pyrochlore-type structures. The measured values of the grain conductivity obey the Arrhenius relation. The grain conductivity of each composition in NdYb_1−xGd_xZr₂O₇ ceramics gradually increases with increasing temperature from 673 to 1173 K. NdYb_1−xGd_xZr₂O₇ ceramics are oxide-ion conductor in the oxygen partial pressure range of 1.0 × 10⁻⁴ to 1.0 atm at all test temperature levels. The highest grain conductivity value obtained in this work is 1.79 × 10⁻² S cm⁻¹ at 1173 K for NdYb_0.3Gd_0.7Zr₂O₇ composition.     

Structural and luminescence properties of RE (RE = Eu, Tb):(MgCa)2Bi4Ti5O20 ceramics

Rare-earth ions (Eu³⁺, Tb³⁺) activated magnesium calcium bismuth titanate [(MgCa)₂Bi₄Ti₅O₂₀] ceramics were prepared by conventional solid state reaction method for their structural and luminescence properties. By using XRD patterns, the structural properties of ceramic powders have been analyzed. Emission spectrum of Eu³⁺:(MgCa)₂Bi₄Ti₅O₂₀ ceramic powder has shown strong red emission at 615 nm (⁵D₀ → ⁷F₂) with an excitation wavelength λ_exci = 393 nm and Tb³⁺:(MgCa)₂Bi₄Ti₅O₂₀ ceramic powder has shown green emission at 542 nm (⁵D₄ → ⁷F₅) with an excitation wavelength λ_exci = 376 nm. In addition, from the measurements of scanning electron microscopy (SEM), Fourier transform-infrared (FTIR) and energy dispersive X-ray analysis (EDAX) results the morphology, structure and elemental analysis of these powder ceramics have been studied.