Activation energy measurements in rheological analysis of cheese

Activation energy of flow (E_a) between 30 and 44 °C was calculated from temperature sweeps of cheeses with contrasting characteristics to determine its usefulness in predicting rheological behavior upon heating. Cheddar, Colby, whole milk Mozzarella, low-moisture part-skim Mozzarella, Parmesan, soft goat, and Queso Fresco cheeses were heated from 22 to 70 °C, and E_a was calculated from the resulting Arrhenius plots. Protein and moisture content were highly correlated with E_a. The E_a values for goat cheese and Queso Fresco, which did not flow when heated, were between 30 and 60 kJ mol^?1. Cheddar, Colby, and the Mozzarellas did flow upon heating, and their E_a values were between 100 and 150 kJ mol^?1. Parmesan, the hardest cheese, flowed rapidly with heat and had an E_a > 180 kJ mol^?1. E_a provides an objective means of quantitating the flow of cheese, and together with elastic modulus and viscous modulus provides a picture of the behavior of cheese as it is heated.     

Colour and texture of apples high pressure processed in pineapple juice

Cubes of Granny Smith and Pink Lady apples were vacuum packed in barrier bags with 0% to 50% (v/v) pineapple juice (PJ) at 20°Bx and subjected to high pressure processing (HPP) at 600 MPa for 1–5 min (22 °C). The in-pack total colour change (ΔE) was observed over 4 weeks at 4 °C. Within <1 week of storage at 4 °C, texture, polyphenoloxidase, pectinmethylesterase activities, changes in ΔE and visual browning after opening the bags during air exposure (22 °C; 21% O2 ) for 5 h were also monitored. During the 4 weeks storage in bag visible colour changes were not observed. Texture and ΔE after 5 h air exposure were significantly affected by the apple variety, HPP time and % PJ used. The combined treatment significantly reduced residual PPO activity while PME activity was not affected in both varieties. Pineapple juice in combination with HPP could be used as a natural preservation system for minimally processed apples.Industrial relevanceBrowning upon opening the packs and during air exposure can adversely affect the quality of fresh-cut fruits. Combined treatment of high pressure processing (HPP) and use of pineapple juice has the potential to prevent browning for several hours giving sufficient time for presentation and use in domestic and foodservice environment where high quality fresh-like fruit is required.     

Adsorption kinetics,thermodynamics and isotherm of Hg(II) from aqueous solutions using buckwheat hulls from Jiaodong of China

The adsorption kinetics and adsorption isotherms of buckwheat hulls in the region of Jiaodong, China (BHJC) for Hg(II) were investigated. Results revealed that the adsorption kinetics of BHJC for Hg(II) were well described by a pseudo second-order reaction model, and the adsorption thermodynamic parameters ΔG, ΔH and ΔS were –5.83 kJ mol^?1(35 °C), 73.1, and 256 J K^?1 mol^?1, respectively. Moreover, Langmuir, Freundlich and Redlich–Peterson isotherm models were applied to analyse the experimental data and to predict the relevant isotherm parameters. The best interpretation for the experimental data was given by the Langmuir isotherm equation, and the maximum adsorption capacity for Hg(II) is 243.90 mg/g at 35 °C. Furthermore, investigation of the adsorption selectivity showed that BHJC displayed strong affinity for mercury in the aqueous solutions and exhibited 100% selectivity for mercury in the presence of Zn(II) and Cd(II).     

Effects on Escherichia coli inactivation and quality attributes in apple juice treated by combinations of pulsed light and thermosonication

Pulsed light (PL) and Thermosonication (TS) were applied alone or in combination using a continuous system to study their effect on Escherichia coli inactivation in apple juice. Selected quality attributes (pH, °Brix, colour (L, a, b, ΔE), non-enzymatic browning (NEBI) and antioxidant activity (TEAC)) were also evaluated pre- and post-processing. Two PL (360 μs, 3 Hz) treatments were selected and the juice exposed to energy dosages of 4.03 J/cm² (‘low’ (L)) and 5.1 J/cm² (‘high’ (H)) corresponding to 51.5 and 65.4 J/mL, respectively. The juice was also processed by TS (24 kHz, 100 μm) at 40 °C for 2.9 min (L) or 50 °C for 5 min (H), corresponding to 1456 and 2531 J/ml energy inputs, respectively. The effect of the resulting four energy levels and sequence (PL + TS and TS + PL) was studied. When the technologies were applied individually the maximum reduction achieved was 2.7 and 4.9 log CFU/mL (for TS (H) and PL (H) respectively), while most of the combined treatments achieved reductions in the vicinity of 6 log CFU/mL, showing an additive effect for both technologies when acting in combination, regardless of the sequence applied. All treatments significantly changed the colour of apple juice and the sequence in which the technologies were applied affected colour significantly (P < 0.05). The energy level applied did not affect any of the measured quality attributes.     

Antioxidant activity of Maillard reaction products from a porcine plasma protein–sugar model system

Maillard reaction products (MRPs) were prepared by heating 2% porcine plasma protein (PPP) and reducing sugars (glucose, fructose and galactose) at the levels of 1% or 2% at 100 °C up to 5 h without pH control. Browning and intermediate products, as monitored by absorbance at 420 nm and absorbance at 294 nm, increased as heating time increased (P < 0.05). However, fluorescence (Ex 347 and Em 415 nm) sharply increased within 1 h and subsequently decreased when heating time increased (P < 0.05). Increase in browning and formation of intermediate products was observed with a concomitant decrease in free amino groups. Among sugars and concentrations used, galactose at 2% rendered the highest browning and intermediate products. MRPs derived from galactose, especially at a level of 2% possessed greater reducing power and DPPH radical-scavenging activity than those prepared from fructose and glucose. MRPs derived from fructose or galactose at the level of 2% showed the increase in reducing power and DPPH radical-scavenging activity in a concentration-dependent manner. In general, antioxidative activity of PPP–sugar MRPs was coincidental with the browning development and the formation of intermediate products.     

Comparative Studies of Ginger (Zingiber officinale) and West African Black Pepper (Piper guineense) Extracts at Different Concentrations on the Microbial Quality of Soymilk and Kunun-zaki

Extracts of two spices, namely ginger (Zingiber officinale) and black pepper (Piper guineense) were prepared in 0.4%, 1.2%, 2.4% and 3.6% concentrations. Soymilk and kunun-zaki were treated respectively with the different concentrations and stored at ambient temperature for 5 days. The microbial load and identification were determined every day of storage until samples were adjudged spoilt.On the first day, 0.4% ginger extract in soymilk and kunun-zaki had a microbial load of 7.77 × 10^6b and 5.17 × 10^6b respectively. 3.6% ginger extract in soymilk and kunun-zaki recorded 3.73 × 10^6b and 3.30 × 106 each. 0.4% black pepper extract in soymilk had 6.273 × 10^6b and recorded 4.63 × 10^6b in kunun-zaki. 3.6% black pepper extract in soymilk and kunun-zaki had a microbial load of 3.20 × 10^6d and 2.90 × 10^6c respectively. On the third day the microbial load increased for both ginger and black pepper extract. Ginger extract recorded 9.13 × 10^6b in soymilk and 5.60 × 10^6b in kunun-zaki at 0.4% concentration. Black pepper extracts recorded 7.43 × 10^6b in soymilk and 3.27 × 10^6b in kunun-zaki also at 0.4% extract. 3.6% black pepper extract recorded 4.10 × 10^6a in soymilk and 2.20 × 106c in kunun-zaki.There was linear reduction of microbial load as spice concentration increased. Black pepper recorded lower microbial load, thus having more antimicrobial activity and may be preferred to be used as natural antimicrobial preservatives to extend the shelf-life of food.     

Raman spectroscopic study of electron-beam irradiated cold-smoked salmon

Raman spectroscopy studies have been carried out to determine the effect of electron-beam irradiation on cold-smoked salmon. Vacuum packed samples were electron-beam irradiated at doses between 0 and 8 kGy. The irradiation at 8 kGy originated modifications on the protein secondary structure with a decrease (p < 0.05) in α-helix and the concomitant increase (p < 0.05) in β-sheet, turns and unordered content. Irradiation (?1 kGy) provokes a decrease of 1518 cm^?1 band intensity of cold-smoked salmon indicating that the treatment could produce a decrease of carotenoid content.     

Rapid (microwave) heating rate effects on texture,fat/water holding,and microstructure of cooked comminuted meat batters

Comminuted and gelled, fat-containing meat products such as frankfurters and luncheon meats are commercially processed by heating relatively slowly (for up to 2 h or more) to an endpoint of about 70 °C prior to cooling. This study compared such a slow, ramp heating regime (0.5 °C/min), terminated at 70 °C, to rapid, square-wave cooking (one step: rapid 100 °C/min heating to 70 °C endpoint, plus isothermal holding prior to cooling, or two-step: rapid heating to 50 °C, holding, then rapid heating to 70 °C plus holding prior to cooling) on meat batter gel properties (fracture and small strain rheology, microstructure, cook loss, and expressible water). The results indicated that a rapid cooking process, with its inherent advantages of reduced process time, lower equipment footprint, and more efficient use of energy, can produce a product nearly equivalent in textural properties and cook yield to one processed by traditional smokehouse cooking when the cook value of the processes is similar and an intermediate (near 50 °C) holding step is included (two-step rapid heating). One-step rapid heating negatively affected gel structural homogeneity and water/fat holding properties of fat-containing gels.     

Efficacy of two silicone-hydrogel contact lenses for bandage use after photorefractive keratectomy

PurposeTo evaluate the efficacy of two silicone hydrogel (SiH) contact lenses, approved for continuous wear for one week, following photorefractive keratectomy (PRK).MethodsForty seven myopic patients (94 eyes) undergone bilateral PRK were enrolled in this prospective, double-masked, comparative study. One eye of each patient was fitted with a Lotrafilcon B lens (Ciba Vision, Duluth, US; 30-day recommended replacement) whereas the fellow eye was fitted with an Asmofilcon A lens (Menicon, Nagoya, Japan; 14-day recommended replacement). Epithelial defect size was assessed using slit lamp biomicroscopy on the day of surgery and at days 1–4 post-operatively. Uncorrected and best-corrected visual acuity and retinal straylight (C-Quant, Oculus Optigerate, Germany) were evaluated pre-operatively and one month post-operatively.ResultsAverage epithelial defect size for Asmofilcon A and Lotrafilcon B was 25.5 ± 11.0 mm² vs. 27.1 ± 9.9 mm² at day 1 (p = 0.007) and 6.3 ± 7.0 mm² vs. 9.2 ± 9.5 mm² at day 2 (p = 0.012) post-operatively. Re-epithelialization at day 3 was completed in 87.2% of the eyes fitted with Asmofilcon A lenses, compared to 74.5% with Lotrafilcon B lenses (p = 0.012). At the 3rd post-operative day 29.8% of re-epithelialized eyes showed irregular suture with Lotrafilcon B, compared to 12.8% eyes with Asmofilcon A lenses (p < 0.001). Finally, no statistically significant differences were found post-operatively between the two lenses retinal straylight (p = 0.98) and best-corrected visual acuity (p = 0.68).ConclusionsSiH lenses can be used as an effective bandage after PRK due to the limited time requested for achieving complete corneal re-epithelialization. Faster and smoother epithelial healing is provided with Asmofilcon A over Lotrafilcon B lenses.     

The effect of tinted soft contact lens wear on functional visual acuity and higher-order aberrations

PurposeTo investigate the differences of functional visual acuity (FVA) and high order aberrations (HOAs) in relation to tinted and clear hydrogel soft contact lens (SCL) wear.MethodsA prospective comparative study was performed in 16 eyes of 16 healthy volunteers. Dynamic visual acuity (using a FVA measurement system) and higher-order aberrations (using a wavefront sensor) were compared in subjects wearing two types of soft contact lenses: 1-day Acuvue^® (Vistakon, Jacksonville, FL) clear and the 1-day Acuvue^® Define^TM (Vistakon, Jacksonville, FL) tinted lens. The blink rates were recorded during FVA testing. The correlation between the difference of HOAs and differences in FVA values was analyzed.ResultsThe mean LogMAR FVA scores with clear and tinted SCLs were 0.07 ± 0.13 and 0.14 ± 0.17 (P < 0.05). The mean blink frequencies with clear and tinted SCL wear were 18.4 ± 8.3 and 25.3 ± 4.7 blinks/min (P < 0.05). Both 3rd-order aberrations and total HOAs showed statistically significant differences between the two types of soft contact lenses for 6 mm pupil measurements (P < 0.05). A significant positive linear correlation was observed between ΔHOAs and ΔLogMAR FVA for 6 mm pupil measurements (R = 0.53, P = 0.04).ConclusionsTinted contact lens wear appears to induce a reduction in optical quality. Functional visual acuity measurement is a useful procedure to study the changes of visual performance and quality in tinted contact lens wear.     

Effect of Maillard reaction conditions on browning and antiradical activity of sugar–tuna stomach hydrolysate model system

The antiradical activity of Maillard reaction products (MRPs) made from sugar–tuna stomach hydrolysate model system was tested. The antiradical activity of the MRPs derived from ribose was 11-fold higher than that of MRPs derived from glucose due to the acyclic form of the ribose. The activity reached the plateau at a 30 mg/mL ribose concentration. The ribose caramelization contributed to the antiradical activity and browning reactions at 95 °C and 115 °C. The increase in DPPH radical scavenging of MRPs is attributed not only to the temperature but also to the buffer type and buffer concentration. Phosphate buffer showed the most efficient compared to citrate or Tris–HCl buffers. A positive correlation (R² = 0.98) was observed between the antiradical activity, the browning and the phosphate concentration. The MRPs obtained under these mild experimental conditions exhibited no toxicity towards Vero cells and 3T3 cells, despite their high antiradical activity.     

Effect of cook temperature on starter and non-starter lactic acid bacteria viability,cheese composition and ripening indices of a semi-hard cheese manufactured using thermophilic cultures

Semi-hard cheeses were manufactured using Streptococcus thermophilus and Lactobacillus helveticus cultures and their ripening was characterised. During cheese manufacture, curds were cooked to a maximum temperature of 47, 50 or 53 °C, pre-pressed under whey at pH 6.15, moulded, pressed and brined. Increased cook temperature resulted in increased manufacture time, a significantly reduced growth rate of S. thermophilus during manufacture in the order 47≈50 °C>53 °C and in significantly lower mean viable cell counts of S. thermophilus up to 56 d of ripening. Increasing cook temperature had no significant effect on mean viable cell numbers of L. helveticus or non-starter lactic acid bacteria (NSLAB). Cheeses produced from curds cooked to 47 °C had significantly higher levels of moisture in non-fat substances (MNFSs), salt-in-moisture and a significantly lower pH and levels of butyrate compared with cheeses produced from curds cooked to 50 or 53 °C.     

The interaction of metal ions with Maillard reaction products in a lactose–glycine model system

The influence of Cu²⁺, Fe²⁺ and Zn²⁺-ions on Maillard model reactions was studied by heat treatment of lactose/glycine model solutions. The presence of metals affected the intensity of browning. Fe²⁺-ions stimulated the accumulation of colored compounds at all concentrations (20–100 mg/L) tested, Cu²⁺ and Zn²⁺ only at the lowest concentrations applied (1 and 5 mg/L, respectively) but to a higher extent. Cu²⁺ and Zn²⁺-ions at the highest concentrations applied (5 and 25 mg/L, respectively) suppressed browning of the model mixtures. The relative amounts of metal ions incorporated into the high molecular weight melanoidin fraction increased initially with the reaction time, but near the end of the reaction time studied (5 h, reflux conditions) Cu²⁺ and Fe²⁺-ions were released again from the melanoidins. The amounts of metal ions incorporated into the lactose–glycine melanoidins and their influence on Maillard browning of the different fractions depended on the time of interaction and the nature and concentration of the incorporated metals.     

Modeling the inactivation kinetics of fruit bromelain in pineapple during high-pressure and thermal treatments

The stability of fruit bromelain (FBM) in pineapple pulp was studied within a high-pressure domain of 0.1–600 MPa/30–70 °C/1 s–30 min. The pulse effect was quantified as a function of pressure, temperature, pressure build-up and decompression times. A maximum of 60% reduction in FBM activity was obtained after a single pulse of 600 MPa/70 °C. Upon applying nth order model, the obtained reaction order (n) for thermal (0.1 MPa/30–70 °C) and high-pressure (100–600 MPa/30–70 °C) inactivation was 1.1 and 1.2, respectively. The inactivation rate constant (k) ranged from 1.2 to 45.0 × 10^− 3 U^n − 1 min^− 1. The activation energy was nonlinearly dependent on pressure (P); whereas, the activation volume was linearly related to temperature (T). The nonlinear dependence of k on P and T was modeled by an empirical equation. The D-values obtained from the empirical model appeared to be more realistic than those from the log-linear kinetics.Industrial relevancePineapple fruit bromelain (FBM) has numerous health benefits and therapeutic effects. It is a protease enzyme that helps in digestion. Processing of pineapple pulp needs attention towards retaining the maximum FBM activity in it. A detailed kinetic study of FBM within a broad range of pressure–temperature–time domain will help in designing a high-pressure process for the pineapple pulp with respect to its bromelain stability.     

Quality changes of ready-to-eat ginseng chicken porridge during storage at 25 °C

Ready-to-eat (RTE) ginseng chicken porridge was heated in a retort with an F-value of 4.0 after being packaged in a gas-tight plastic tray (PP/EVOH/PP) with top film (PET/PA/CPP). Various quality changes were investigated during the storage for 28 weeks at 25 °C. Over the storage period, microorganisms were not detected above 1.0 log cfu/cm² (detection limit). The viscosity increased sharply from 775 to 2025 cp for initial 4 weeks and increased steadily until 16 weeks, with a slight reduction thereafter. During the 28 weeks of storage, the ratio of residual oxygen and pH decreased from 10.8% and 6.49 to 5.7% and 6.05, while retrogradation degree increased from 0% to 55.9%. Hunter L^⁎, b^⁎, and ΔE values increased until 20 weeks and remained for the rest of storage. Based on sensory, microbiological and physicochemical evaluations, the RTE ginseng chicken porridge could be marketable for at least 24 weeks at 25 °C.     

Dual-enzymatic synthesis of lactulose in organic-aqueous two-phase media

Lactulose has been successfully synthesized by dual-enzymatic method in organic-aqueous two-phase media using lactose and fructose as the raw materials. Cyclohexane–buffer system C₆H₁₂:buffer = 95:5 (v/v) was employed as the organic-aqueous media for the reaction. The dual-enzymatic system was consisted of immobilized lactase (IL) and immobilized glucose isomerase (IGI). Immobilized lactase was prepared by cross-linking the free lactase into Fe₃O₄-chitosan magnetic microspheres. The main enzymatic reaction parameters were investigated, including reaction temperature (T), pH value and reaction time (t). Under the optimum reaction conditions, i.e., lactose 0.8 g mL^?1, fructose 0.1 g mL^?1, IL 0.1 g mL^?1, IGI 0.05 g mL^?1, T = 30 °C, pH = 8.0 and t = 2 h, the obtained highest lactulose yield was approximately 151 g L^?1 and the corresponding productivity was 75.5 g L^?1 h^?1. Experimental results indicated that the organic-aqueous media can significantly promoted the transglycosidation activity of lactase and therefore improve the lactulose yield. The possible reaction mechanism of the synthesis of lactulose using IL and IGI in two-phase system was also proposed.     

Proofing of bread dough assisted by ohmic heating

Proofing of bread dough was studied under ohmic heating for a target temperature of 35°C. An experimental device based on PLC monitoring was developed to study the effect of heating rates and voltages on the proofing process. Conventional and ohmic heating-assisted proofing were compared; the results showed that the process itself had no impact on the proofing when identical heating rates (0.065°C·min^− 1) were used. However, increasing the heating rate could significantly reduce the time needed to reach an expansion ratio of 3 (from 122 min during conventional proofing to 65–70 min during ohmic heating in the range of 1–10°C·min^− 1). This was due to the shortening of the lag phase at the beginning of proofing (from 58 min during conventional heating to 20 min at 10°C·min^− 1 in ohmic heating). Results also showed that the voltage intensity had no significant effect on the proofing kinetics in the range of 50–150 V. The evolution of expansion ratios with proofing time could be fitted by a Gompertz model with a very high accuracy (R² > 0.999)     

Modelling kinetics of watercress (Nasturtium officinale) colour changes due to heat and thermosonication treatments

Watercress (Nasturtium officinale) colour changes due to blanching by heat and a combined treatment of heat/ultrasound (thermosonication) were studied in the temperature range of 82.5 to 92.5 °C. The application of thermosonication was intended to enable less severe blanching treatments and, therefore, improve the quality of the blanched product. The thermosonication blanching processes promoted changes of the green colour (aⁿ parameter) at a higher rate (P < 0.05), when compared with the heat blanching processes. No significant differences (P > 0.05) were detected between heat and thermosonication blanching processes in terms of the colour parameters Lⁿ, bⁿ and TCD changes. In both treatments, a fractional first order model fitted well the experimental data for Lⁿ, aⁿ and bⁿ (R_H² = 0.99; R_Ts² = 0.99) and TCD (R_H² = 0.92; R_Ts² = 0.96) colour parameters.The chlorophylls content showed no significant differences (P > 0.05) between thermally treated and thermosonicated watercress samples.The present findings will help to evaluate the effectiveness of thermosonication as a novel process to replace the classical heat treatment.Industrial relevanceConventional blanching commonly results in severe losses or destruction of nutrients due to process intensity and extended process times. Consequently, the attempts to use the synergistic effects of heat and ultrasound (at least) for enzyme inactivation are of high relevance. The results, although not conclusive, indicate, that they may aid optimization of blanching processes.     

Effect of sucrose on the anthocyanin and antioxidant capacity of mulberry extract during high temperature heating

This study aimed to elucidate how sucrose affects the anthocyanin and antioxidant capacity at low pH under high temperature. The interactive role of different sucrose concentrations (20%, 40%, 60%) and pH values (2, 3, 4) on a mulberry anthocyanin model system at different heating times was investigated. A520 (red color) decreased from 0 to 4 h and increased thereafter, degradation index of anthocyanin (DI) increased in the pure anthocyanin system during 68 h of heating. The samples with sucrose showed a DI peak at 17 h, which indicated that severe browning occurred after this period should be along with lower ratio of A420 and A520, and the latter high A520 came from a brown pigment instead of anthocyanin. Furfural content reached a maximum at 26 h during heating, and other caramelization intermediates showed a similar trend during this period. All samples, with or without sucrose, showed increase in polymeric and copigmented anthocyanin and a decrease in the monomeric ones during heating. The browning depends on the pH and sucrose concentration. Samples at pH 2 with higher sucrose showed the most significant browning and the increase of ferric reducing ability of plasma (FRAP) indicated that hydrolysis of sucrose might increase the antioxidant capacity. Further correlation analysis indicated that changes of antioxidant capacity during heating were closely related to the caramelization intermediate developed from sucrose in the sugar added system.     

The effect of γ-irradiation on the non-enzymatic browning reaction in the aqueous model solutions

Aqueous solutions of sugars (xylose, arabinose, fructose, glucose or sucrose), alone or in the presence of amino acid (lysine), were γ-irradiated at 0, 5, 10, 20 and 30 kGy at room temperature. Also evaluated were differences between irradiation and heat treatment. Absorbances at 420 nm, of the irradiated sugar–amino acid solutions, were increased although no browning was observed in the irradiated sugar or amino acid alone. The degree of browning of the irradiated sugar–amino acid solution increased with increasing irradiation dose and was dependent on the type of sugar. The non-reducing sugar, sucrose, did not react with lysine by heating for 4 h at 80 °C; however, the irradiated sucrose–lysine solution showed the non-enzymatic browning reaction and it had a higher reactivity than other sugars. For the sugar–lysine solution irradiated at 30 kGy, browning was in the following order of intensity: sucrose > fructose > arabinose > xylose > glucose. Furfural compounds (5-hydroxymethylfurfural and 2-furaldehyde) were not detected in any irradiated samples.