Dispersion polymerization of styrene in supercritical CO2 in the presence of non-fluorous random copolymeric stabilizers

The non-fluorous random copolymers, poly (3-[tris(trimethylsilyloxy)silyl]propyl methacrylate-co-2-dimethylaminoethyl methacrylate) (poly(SiMA-co-DMAEMA)) and poly (3-[tris(trimethylsilyloxy)silyl]propyl methacrylate-co-diisopropylaminoethyl methacrylate) (poly(SiMA-co-DPAEMA)) were prepared with different comonomer compositions and utilized as stabilizers in the dispersion polymerization of styrene in supercritical carbon dioxide (scCO₂). The copolymers were found to provide an effective stabilization on the polystyrene (PS) latexes in scCO₂. Poly(SiMA-co-DMAEMA) (71:29) were proved to be optimal among (86:11), (71:29), and (57:33) comonomer compositions to produce micron-sized spherical PS particles with higher yields. Poly(SiMA-co-DPAEMA) having higher methyl branching in the DPAEMA pendant group provided a better stabilization compared to poly(SiMA-co-DMAEMA). The effect of varying concentration of stabilizer and monomer upon the polymerization yield, molar mass, and morphology of PS have been investigated.     

Dispersion polymerization of MMA in supercritical CO2 in the presence of poly(poly(ethylene glycol) methacrylate-co-1H,1H,2H,2H-perfluorooctylmethacrylate)

Various random copolymers of poly(poly(ethylene glycol) methacrylate-co-1H,1H,2H,2H-perfluorooctylmethacrylate) (p(PEGMA-co-FOMA)) with different poly(ethylene glycol) (PEG) chain length (M_n = 300, 475, and 1100) and different FOMA content have been synthesized in supercritical carbon dioxide (scCO₂) via free-radical polymerization. The copolymers containing above 50 wt% FOMA could be used as a stabilizer for the polymerization of methyl methacrylate (MMA) in scCO₂. For PEGMA (300) and PEGMA (475) copolymers, the copolymeric stabilizer with 67–69 wt% FOMA content was shown to be optimal to produce micrometer-size spherical PMMA powder. The size of pendant PEG group and the composition of copolymer as well as the concentration of MMA affected on the size of PMMA particles and the stability of PMMA latexes in CO₂.     

Rapid pH/temperature-responsive cationic hydrogels with dual stimuli-sensitive grafted side chains

Dual temperature- and pH-sensitive comb-type grafted cationic hydrogels are successfully synthesized by grafting polymeric chains with freely mobile ends, which are composed of both N-isopropylacrylamide (NIPAM) segments and N,N-dimethylamino ethyl methacrylate (DMAEMA) segments, onto the backbone of crosslinked poly(NIPAM-co-DMAEMA) networks. Equilibrium and dynamic swelling/deswelling properties of the prepared hydrogels responding to pH and/or temperature are investigated. The prepared hydrogels demonstrate a lower critical solution temperature (LCST) at about 34 °C and a pK_a value at about pH 7.3. At lower pH and lower temperature, both the swelling degree and the swelling rate of the comb-type grafted hydrogel are larger than those of the normal-type crosslinked hydrogel. The comb-type grafted poly(NIPAM-co-DMAEMA) hydrogel exhibits a more rapid deswelling rate than that of the normal-type hydrogel in response to a pH jump from 2.0 to 11.0 at a fixed temperature. The volume changes of the poly(NIPAM-co-DMAEMA) hydrogels are acute in a series of fixed buffer solutions with an abrupt increase of environmental temperature from 18 °C to a temperature higher than the LCST. The comb-type grafted poly(NIPAM-co-DMAEMA) hydrogels show quite fast shrinking behaviors in response to simultaneous dual temperature and pH stimuli. Drug-release in vitro from the prepared poly(NIPAM-co-DMAEMA) hydrogels is carried out when the environmental temperature and pH are changed synchronously. The results show that the model drug Vitamin B₁₂ is released much more rapidly from the comb-type grafted hydrogel than that from the normal-type hydrogel. The proposed dual temperature/pH-sensitive comb-type grafted cationic poly(NIPAM-co-DMAEMA) hydrogel in this study may find various potential applications, e.g., for fabricating rapid-response smart sensors, actuators, and chemical/drug carriers and so on.     

Synthesis of poly[2-(α-d-mannopyranosyloxy)ethyl-co-2-dimethylaminoethyl methacrylates] and its lectin-binding and DNA-condensing properties

Radical copolymerizations of 2-(α-d-mannopyranosyloxy)ethyl methacrylate (ManEMA) with 2-dimethylaminoethyl methacrylate (DMAEMA) were carried out in N,N-dimethylformamide (DMF) containing 10 vol% water at 60 °C to yield cationic glycopolymers. The number-average molecular weights (M_ns, standard Pullulan calibration) and polydispersities (M_w/M_ns) of the resulting copolymers were ranged from 17,400 to 41,700 and from 1.7 to 3.2, respectively. The compositions of the resulting copolymers were very close to those in the feed. The monomer reactivity ratios r_ManEMA and r_DMAEMA were 0.98 and 1.22, respectively. The lectin-binding properties of poly(ManEMA-co-DMAEMA) to concanavalin A (ConA) was examined using a turbidimetric assay. The clustering rate increased with increasing mole fractions of the ManEMA units in the copolymer (F_ManEMA), even under a constant concentration of the ManEMA units (50 μM), indicating the typical cluster glycoside effect. The DNA-condensing ability of the resulting copolymers was examined by a gel retardation assay using pEGFP-N1 plasmid (4.7 kbp). Though the ManEMA units interfered with the complexation of the copolymer with the plasmid DNA, complete retardation was observed under the condition of lower contents of ManEMA units (F_ManEMA < 0.2) in pure water. These findings indicate that poly(ManEMA-co-DMAEMA) is a cationic glycopolymer exerting lectin-binding and DNA-condensing abilities.     

Study on preparation of monodispersed poly(styrene‐co‐N‐dimethylaminoethyl methacrylate) composite microspheres by SPG (Shirasu Porous Glass) emulsification technique

Monodispersed poly(styrene‐co‐N‐dimethylaminoethyl methacrylate) [P(St‐DMAEMA)] composite microspheres were prepared by employing a Shirasu Porous Glass (SPG) emulsification technique. A mixture of monomer, hexadecane (HD), and initiator N,N′‐azobis(2,4‐dimethylvaleronitrile) (ADVN) was used as a dispersed phase and an aqueous phase containing stabilizer [poly(vinyl pyrrolidone) (PVP) or poly(vinyl alcohol) (PVA)], sodium lauryl sulfate (SLS), and water‐soluble inhibitor [hydroquinone (HQ), diaminophenylene (DAP), or sodium nitrite (NaNO₂)], was used as a continuous phase. The dispersed phase was permeated through the uniform pores of SPG membrane into the continuous phase by a gas pressure to form the uniform droplets. Then, the droplets were polymerized at 70°C. The effects of inhibitor, stabilizer, ADVN, and DMAEMA on the secondary nucleation, DMAEMA fraction in the polymer, conversion, and morphologies of the particles were investigated. It was found that the secondary nucleation was prevented effectively in the presence of HQ or DAP when PVP was used as the stabilizer. The secondary particle was observed when ADVN amount was raised to 0.3 g (/18 g monomer); however, no secondary nucleation occurred even by increasing DMAEMA fraction to 10 wt %. This result implied that the diffusion of ADVN into the aqueous phase was a main factor responsible to the secondary nucleation more than that of DMAEMA. The hollow particles were obtained when NaNO₂ was used, while one‐hole particles formed in the other cases. By adding crosslinking agent, the hole disappeared and the monomer conversion was improved. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 79: 2408–2424, 2001     

Dispersion polymerization of methyl methacrylate in supercritical carbon dioxide using a silicone‐containing fluoroacrylate stabilizer

Free radical dispersion polymerization of methyl methacrylate (MMA) was carried out in supercritical carbon dioxide (scCO₂) using poly{(heptadecafluorodecyl acrylate)‐co‐3‐[tris(trimethylsilyloxy)silyl]propyl methacrylate} (p(HDFDA‐co‐SiMA)) as stabilizer. Dry, fine powdered spherical poly(methyl methacrylate) (pMMA) particles with well‐defined sizes were produced. The resulting high yield of spherical and relatively uniform micron‐size pMMA particles was formed utilizing various amounts of p(HDFDA‐co‐SiMA) random copolymer. The particle diameter was shown to be dependent on the weight percent of the stabilizer added to the system. The effects of varying the concentration of stabilizer (1–7 wt%), reaction time (4–12 h) and pressure (15–35 MPa) upon the polymerization yield, molar mass and morphology of pMMA were investigated. Copyright © 2005 Society of Chemical Industry     

Monosize polystyrene latices carrying functional groups on their surfaces

In this study, monosized polystyrene (PS) latices were prepared by dispersion polymerization of styrene in isopropanol-water media using poly(acrylic acid) (PAA) as a steric stabilizer and 2,2′-azobisizobutyronitrile (AIBN) as an initiator. The effects of initiator and stabilizer concentrations, alcohol/water and monomer/dispersion medium ratio on the polymerization kinetics, and the size and monodispersity of PS latices were experimented with in a stirred reactor system. Monosize PS beads in the size range of 1.0–3.0 μm were obtained. The PS latex obtained in the first step having a diameter of 2.3 μm were used as the seed latex, and styrene/acrylate monomers, acrylic acid (AA), 2-hydroxyethyl methacrylate (HEMA), and dimethylaminoethyl methacrylate (DMAEMA) were copolymerized onto the PS latex particles. The incorporation of functional groups to the surface and bulk structure of PS was confirmed by IR, FTIR, XPS, and zeta potential measurements. © 1994 John Wiley & Sons, Inc.     

Dispersion polymerization of 2-hydroxyethyl methacrylate stabilized by a hydrophilic/CO2-philic poly(ethylene oxide)-b-poly(1,1,2,2-tetrahydroperfluorodecyl acrylate) (PEO-b-PFDA) diblock copolymer in supercritical carbon dioxide

Dispersion polymerization of 2-hydroxyethyl methacrylate (HEMA) has been successfully performed in supercritical carbon dioxide at P=370 bar and T=65 °C with azobis(isobutyronitrile) as initiator and a hydrophilic/CO₂-philic poly(ethylene oxide)-b-poly(1,1,2,2-tetrahydroperfluorodecyl acrylate) (PEO-b-PFDA) block copolymer as steric stabilizer. The PEO-b-PFDA (2K/21K) block copolymer was synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. Spherical particles of poly(HEMA) were obtained in the range of 200-400 nm diameter size with a narrow particle size distribution (D_w/D_n<1.1). The effect of the stabilizer concentration on the dispersion polymerization was investigated from 20 w/w% down to 3.5 w/w% versus HEMA. Precipitation polymerization in the absence of stabilizer lead to the formation of large aggregates of partially coalesced particles whereas discrete spherical particles of poly(HEMA) were obtained by dispersion polymerization even at low concentration of PEO-b-PFDA (3.5 w/w% versus HEMA).     

Thermal properties, specific interactions, and surface energies of PMMA terpolymers having high glass transition temperatures and low moisture absorptions

We have prepared a series of poly(methyl methacrylate) (PMMA)-based terpolymers that have high glass transition temperatures and low moisture absorptions by the free radical copolymerization of methyl methacrylate, methacrylamide, and styrene in dioxane. We have investigated the effects of the styrene content on the glass transition temperatures, hydrogen bonding interactions, surface energies, moisture absorption, and molecular weights of these poly(methyl methacrylate-co-methacrylamide-co-styrene) (Poly(MMA-co-MAAM-co-S)) terpolymers by differential scanning calorimetry, Fourier transform infrared and X-ray photoelectron spectroscopies, contact angle measurements, and gel permeation chromatography. The results indicate that the glass transition temperatures, hydrogen bonding strengths, surface energies, molecular weights, and the moisture absorption decreased upon increasing the PS content in most of the terpolymer systems. In addition, the moisture absorptions of some selected terpolymers decreased even through they possess higher values of T_g than pure PMMA. These selected terpolymers have the potential to replace pure PMMA in optical device applications.     

Effects of the cosurfactant 1‐butanol and feed composition on nanoparticle properties produced by microemulsion copolymerization of styrene and methyl methacrylate

The concentration of the cosurfactant 1‐butanol (BuOH) determined the polymer weight and size for a series of poly(styrene‐co‐methyl methacrylate)s (P(St‐co‐MMA)) synthesized by the free‐radical (o/w) microemulsion technique. A factorial design established the levels of the experimental conditions for the polymerization i.e., concentration of the surfactant, sodium dodecyl sulfate (SDS); concentration of the cosurfactant, BuOH; temperature and ratio of the styrene (St) to methyl methacrylate (MMA). An increase in the weight‐average molecular weight (M_w) and number‐average molecular weight (M_n) was observed in the P(St‐co‐MMA) series with an increase in BuOH concentration from 1 to 5 wt %. These effects could arise from the micellar aggregation induced by interfacial BuOH. The unique micellar conditions could be exploited to synthesize copolymers of varying molecular weight and size. Additionally, the composition of the copolymers was virtually templates of the feed composition. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Swelling behaviour of a new kind of polyampholyte hydrogel composed of dimethylaminoethyl methacrylate and acrylic acid

Poly[(dimethylaminoethyl methacrylate)‐co‐(acrylic acid)] [poly(DMAEMA‐co‐AAc)] hydrogels have been synthesized by UV‐induced copolymerization of dimethylaminoethyl methacrylate (DMAEMA) and acrylic acid monomer. The effects of pH and ionic strength on the swelling behaviour of poly(DMAEMA‐co‐AAc) hydrogels were investigated in detail. It was found that there is minimal equilibrium swelling ratio (ESR) for the hydrogels with the change of pH, and the pH at minimal ESR of the hydrogels was defined by the isoelectric points (IEP), similar to the situation with protein molecules. The IEP of the hydrogels shifted to higher values with increase in the DMAEMA content in the hydrogels. Antipolyelectrolyte behaviour of the hydrogels at a pH near the IEP was observed as well, and the ESR increased with increasing ionic strength. The study of swelling kinetics of the hydrogels showed that the swelling process was Fickian at the IEP and non‐Fickian when the pH deviated from the IEP. Copyright © 2003 Society of Chemical Industry     

Preparation and characterization of polystyrene/titanium dioxide composite particles containing organic ultraviolet‐stabilizer groups

Polystyrene/titanium dioxide (TiO₂) composite particles containing organic ultraviolet (UV)‐stabilizer groups were prepared by the emulsion copolymerization of styrene and 2‐hydroxy‐4‐(3‐methacryloxy‐2‐hydroxylpropoxy)benzophenone with sodium sulfopropyl lauryl maleate as a surfactant in the presence of rutile TiO₂ modified with 3‐(trimethoxysilyl) propyl methacrylate, and the product was poly[styrene‐co‐sodium sulfopropyl lauryl maleate‐co‐2‐hydroxy‐4‐(3‐methacryloxy‐2‐hydroxylpropoxy) benzophenone] [poly(St‐co‐M12‐co‐BPMA)]/TiO₂ composite particles. The structures of the composite particles were characterized with Fourier transform infrared spectroscopy, ultraviolet–visible (UV–vis) absorption spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. The Fourier transform infrared and UV–vis measurements showed that poly(St‐co‐M12‐co‐BPMA) was grafted from the surface of TiO₂, and this copolymer possessed a high absorbance capacity for UV light, which is very important for improving the UV resistance of polystyrene. The thermogravimetric analysis measurements indicated that the percentage of grafting and the grafting efficiency could reach 513.9 and 59.9%, respectively. The differential scanning calorimetry measurement indicated that the glass‐transition temperature of the poly(St‐co‐M12‐co‐BPMA)/TiO₂ composite particles was higher than that of poly (St‐co‐M12‐co‐BPMA).These research results are very important for preparing polystyrene with high UV resistance. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation of core-shell emulsion polymer and optimization of shell composition with respect to opacity of paint film

A series of core-shell latexes comprising a poly(n-butyl acrylate-co-methyl methacrylate-co-methacrylic acid) (PBA/MMA/MAA) core and a poly(styrene-co-acrylonitrile) (PS/AN), poly(butyl acrylate-co-methyl methacrylate) (PBA/MMA) shell were prepared at different shell composition ratios. These core-shell binders were used for preparation of decorative coatings. The latexes were synthesized by a semi-continuous sequential emulsion polymerization and characterized by using transmission electron microscopy (TEM), particle size analyser, viscometry and opacity of paint film. The core-shell emulsion with styrene/acrylonitrile ratio 60/40 as shell composition shows the best optical properties.     

Decorating Au nanoparticles onto optimized P(tBA-co-DMAEMA) carriers for ameliorative catalytic capability

Gold nanoparticles are increasingly being explored as novel catalytic nanomaterials due to their great reductive capacity. However, the van der Waals forces between them would bring poor stabilities as well as attenuated catalytic properties in solution. Therefore, it is significant to find carriers that could prevent catalytic gold nanoparticles from agglomerating. Herein, hydrophilic dimethylaminoethyl methacrylate (DMAEMA) and hydrophobic tert-butyl acrylate (tBA) were used as co-monomers to synthesize copolymer P(tBA-co-DMAEMA) microspheres by one-step emulsifier-free emulsion polymerization. Afterward, the self-assembly behaviors of the amphiphilic polymers P(tBA-co-DMAEMA) under different conditions like molar ratio of DMAEMA/tBA and ethanol/water were explored to reveal an optimal condition for obtaining copolymer with appropriate size and morphology. These microspheres were used as carriers for gold nanoparticles, since HAuCl₄ could be simply reduced and stabilized on their surface. Furthermore, various conditions such as HAuCl₄ content, adding method of HAuCl₄, protonation time and reducing conditions were filtered for the decoration of gold nanoparticles on the shell of that assembled copolymer. This composite was applied as an excellent catalyst for hydrogenation of hazardous chemicals (4-nitrophenol and nitrobenzene). And it shows improved catalytic performance for both 4-nitrophenol in the aqueous system and nitrobenzene in the oil system. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48920.     

Effect of GMA on monodisperse epoxy‐functionalized polymer microsphere particles by dispersion copolymerization of styrene with glycidyl methacrylate

Monodisperse poly[styrene‐co‐glycidyl methacrylate (GMA)] microparticles were synthesized by dispersion copolymerization in a water–ethanol medium. The effects of various polymerization parameters on the particle size and size distribution of the dispersion copolymerization were investigated. The dispersion of polymer particles decreased when the GMA was added if the polystyrene homopolymer particles were polydispersed. The GMA acted as a comonomer as well as a costabilizer in the dispersion copolymerization of styrene with GMA. The solvency of the monomer increased with the concentration of GMA in the polymerization medium because GMA has a greater hydrophilicity than styrene, resulting in a large particle size and a slow polymerization rate. From an HCl–dioxane analysis of the poly(styrene‐co‐GMA) microparticles, great amounts of epoxy groups were detected after the completion of dispersion copolymerization. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1206–1212, 2001     

In situ studies of bovine serum albumin adsorption onto functionalized polystyrene latices monitored with a quartz crystal microbalance technique

The adsorbability of bovine serum albumin (BSA) onto poly(styrene‐co‐itaconic acid) (PS–IA), poly(styrene‐co‐hydroxyethyl methacrylate) (PS–HEMA), poly(styrene‐co‐acrylic acid) (PS–AA), and poly(styrene‐co‐methacrylic acid) (PS–MAA) latices were investigated with a quartz crystal microbalance. The amount adsorbed onto the functionalized latices, except for PS–MAA, was greater than that adsorbed onto polystyrene (PS) latex. To explain this result, two kinds of interaction forces were considered, hydrogen bonding and hydrophobic interactions, whereas electrostatic interaction was assumed to be small. When comparing the two extremes of hydrophobic interaction and hydrogen bonding, the latter was stronger. The corrected adsorption mass suggested that the BSA molecules were adsorbed onto the PS–MAA latex in a side‐on mode. However, in the case of the PS, PS–IA, PS–HEMA, and PS–AA latices, the BSA molecules were probably adsorbed in multiple layers. The presence of the BSA in the latex particle surface was verified by attenuated total reflectance/Fourier transform infrared spectroscopy and atomic force microscopy. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42055.     

Dependence of morphological changes of polymer particles on hydrophobic/hydrophilic additives

Fairly uniform microspheres of poly(styrene‐co‐methyl methacrylate) were prepared by employing a microporous glass membrane [Shirasu porous glass (SPG)]. The single‐step SPG emulsification, the emulsion composed mainly of monomers, hydrophobic additives, and an oil‐soluble initiator, suspended in the aqueous phase containing a stabilizer and inhibitor, was then transferred to a reactor, and subsequent suspension polymerization followed. The droplets obtained were polymerized at 75°C under a nitrogen atmosphere for 24 h. The uniform poly(styrene‐co‐methyl methacrylate) microspheres with diameters ranging from 7 to 14 μm and a narrow particle‐size distribution with a coefficient of variation close to 10% were prepared by using SPG membrane with a pore size of 1.42 μm. The effects of the crosslinking agent and hydrophobic additives on the particle size, particle‐size distribution, and morphologies were investigated. It was found that the particle size decreased with a narrower size distribution when the additives were changed from long‐chain alkanes to long‐chain alcohols and long‐chain esters, respectively. Various microspheres with different morphologies were obtained, depending on the composition of the oil phase. The spherical poly(styrene‐co‐methyl methacrylate) particles without phase separation were obtained when using an adequate amount of the crosslinking agent and methyl palmitate as an additive. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1013–1028, 2000     

Morphologies of polybutylacrylate/poly(styrene‐co‐methyl methacrylate) latex prepared by starved emulsion polymerization Part I. Thermodynamics equilibrium morphology

Heterogeneous latexes were prepared by a semicontinuous seeded emulsion polymerization process under monomer starved conditions at 80 °C using potassium persulfate as the initiator and sodium dodecyl sulfate as the emulsifier. Poly(butyl acrylate) latexes were used as seeds. The second‐stage polymer was poly(styrene‐co‐methyl methacrylate). By varying the amounts of methyl methacrylate (MMA) in the second‐stage copolymer, the polarity of the copolymer phase could be controlled. Phase separation towards the thermodynamic equilibrium morphology was accelerated either by ageing the composite latex at 80 °C or by adding a chain‐transfer agent during polymerization. The morphologies of the latex particles were examined by transmission electron microscopy (TEM). The morphology distributions of latex particles were described by a statistical method. It was found that the latex particles displayed different equilibrium morphologies depending on the composition of the second‐stage copolymers. This series of equilibrium morphologies of [poly(butyl acrylate)/poly(styrene‐co‐methyl methacrylate)] (PBA/P(St‐co‐MMA)) system provides experimental verification for quantitative simulation. Under limiting conditions, the equilibrium morphologies of PBA/P(St‐co‐MMA) were predicted according to the minimum surface free energy change principle. The particle morphology observed by TEM was in good agreement with the predictions of the thermodynamic model. Therefore, the morphology theory for homopolymer/homopolymer composite systems was extended to homopolymer/copolymer systems. © 2002 Society of Chemical Industry     

Suspension polymerization stabilized by triblock copolymer with CdS nanoparticles

In this paper, a new method to prepare polymer colloid particles stabilized by triblock copolymer with CdS nanoparticles was described. Poly(ethylene glycol-block-styrene-block-2-(dimethylamino) ethyl methacrylate) (PEG-b-PS-b-PDMAEMA) triblock copolymer was synthesized by sequential ATRP method. Micelles with CdS nanoparticles in the corona were prepared by “in situ” reaction of hydrogen sulfide with cadmium ion clusters in the corona of the micelles. The size of the CdS nanoparticles is affected by molar ratio of DMAEMA to cadmium ions and polymer concentration in the solution. When introduced into o/w emulsion the micelles reassemble on the surface of styrene oil droplets. PS colloid particles stabilized by triblock copolymer with CdS nanoparticles were achieved by suspension polymerization. TEM image indicates that CdS nanoparticles locate at the surface of the PS colloid particles.     

Morphology of polystyrene/polystyrene-block-poly(methyl methacrylate)/poly(methyl methacrylate) composite particles

Polystyrene/polystyrene-block-poly(methyl methacrylate)/poly(methyl methacrylate) (PS/PS-b-PMMA/PMMA) composite particles were prepared by releasing toluene from PS/PS-b-PMMA/PMMA/toluene droplets dispersed in a sodium dodecyl sulfate aqueous solution. The morphology of the composite particles was affected by release rate of toluene, the molecular weight of PS-b-PMMA, droplet size, and polymer composition. ‘Onion-like’ multilayered composite particles were prepared from toluene droplets of PS-b-PMMA and of PS/PS-b-PMMA/PMMA, in which the weights of PS and PMMA were the same. The layer thicknesses of the latter multilayered composite particles increased with an increase in the amount of the homopolymers. PS-b-PMMA/PS composite particles had a sea-islands structure, in which PMMA domains were dispersed in a PS matrix. On the other hand, PS-b-PMMA/PMMA composite particles had a cylinder-like structure consisting of a PMMA matrix and PS domains.