Growth kinetics of nanograins in Co3O4 fibers

The growth kinetics of nanograins in Co₃O₄ nanofibers has been investigated. Individual fibers were made up of nanograins. The nanograins were observed to coalesce and grow at the expense of the smaller ones, similar to the phenomenon observed in the sintering process of bulk ceramics. The activation energy and the growth kinetics of nanograins were estimated, showing the dominant growth mechanism of nanograins to be likely related to a lattice diffusion process.     

Morphology effects of Co3O4 on the catalytic activity of Au/Co3O4 catalysts for complete oxidation of trace ethylene

Au/Co₃O₄ catalysts with different morphologies (nanorods, nanopolyhedra and nanocubes) were successfully synthesized and evaluated for ethylene complete oxidation. We found that support morphology has a significant effect on catalytic activity, which is related to the exposed planes of different morphological Co₃O₄. HRTEM revealed the Co₃O₄-nanorods predominantly exposes {110} planes, while the dominant exposed planes of Co₃O₄-nanopolyhedra and -nanocubes are {011} and {001} planes, respectively. Compared with {011} and {001} planes, {110} planes exhibit the maximum amount of oxygen vacancies, which play a major role in ethylene oxidation. Therefore, Au/Co₃O₄-nanorods exhibits extraordinary catalytic activity, yielding 93.7% ethylene conversion at 0 °C.     

Rapid synthesis of nanocrystalline Co3O4 by a microwave-assisted combustion method

A facile and rapid microwave-assisted combustion method was developed to synthesize the nanocrystalline Co₃O₄. The study suggested that application of microwave heating to produce the homogeneous porous Co₃O₄ was achieved in a few minutes. The structure and morphology of the as-prepared nanocrystalline Co₃O₄ were investigated by means of X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), Raman spectra, UV-vis absorbance spectra and scanning electron microscopy (SEM). The XRD, FTIR and Raman spectra confirmed the formation of spinel structural Co₃O₄, and the SEM results indicated the porous surface characteristic of the products. Magnetic measurement was carried out using a vibrating sample magnetometer (VSM). The field dependence of the magnetization at room temperature showed a tiny hysteresis loop with a coercivity of 56.7 Oe.     

硫修饰的多孔Co3O4活化过一硫酸盐降解亚甲基蓝

以Na₂S₂O₃为硫源，采用改进的草酸盐-热解法制备了一系列硫修饰的Co₃O₄多孔催化剂[S_x@Co₃O₄,x=0.25、0.50、0.75、1,x为硫的修饰量，以Co(NO₃)₂·6H₂O的物质的量为基准，下同]。以亚甲基蓝(MB)为降解模型，考察了不同催化剂活化过一硫酸盐(PMS)的性能。探讨了催化剂用量、PMS浓度、反应温度、常见阴离子种类在S_x@Co₃O₄-PMS体系下对MB降解率的影响，并评价了催化剂的循环稳定性。结果表明，随着硫修饰量的增加，Co₃O₄的催化性能逐渐升高，S₁@Co₃O₄表现出最佳的催化性能。硫元素以SO₄^2–     

Binary CuO/Co3O4 nanofibers for ultrafast and amplified electrochemical sensing of fructose

Cobalt oxide-doped copper oxide composite nanofibers (CCNFs) were successfully achieved via electrospinning followed by thermal treatment processes and then exploited as active electrode material for direct enzyme-free fructose detection. The morphology and the structure of as-prepared samples were investigated by X-ray diffraction spectrum (XRD) and scanning electron microscopy (SEM). The electrocatalytic activity of CCNFs films towards fructose oxidation and sensing performances were evaluated by conventional electrochemical techniques. Cyclic voltammetry (CV) and chronoamperometry (I−t) revealed the distinctly enhanced sensing properties towards fructose compared to pure copper oxide nanofibers (CNFs), i.e., showing significantly lowered overpotential of 0.30 V, ultrafast (1 s) and ultrasensitive (18.988 μA mM⁻¹) current response in a wide linear range of 1.0 × 10⁻⁵ M to 6.0 × 10⁻³ M with satisfied reproducibility and stability, which could be ascribed to the synergic catalytic effect of the binary CuO/Co₃O₄ composite nanofibers and the highly porous three-dimensional network films structure of the CCNFs. In addition, a good selectivity for fructose detection was achieved. Results in this work demonstrated that CCNFs is one of the promising catalytic electrode materials for enzymeless fructose sensor fabrication.     

Synthesis of LiNi0.9Co0.1O2 from Li2CO3, NiO or NiCO3, and CoCO3 or Co3O4 and their electrochemical properties

Cathode active materials with a composition of LiNi_0.9Co_0.1O₂ were synthesized by a solid-state reaction method at 850 °C using Li₂CO₃, NiO or NiCO₃, and CoCO₃ or Co₃O₄, as the sources of Li, Ni, and Co, respectively. Electrochemical properties, structure, and microstructure of the synthesized LiNi_0.9Co_0.1O₂ samples were analyzed. The curves of voltage vs. x in Li_xNi_0.9Co_0.1O₂ for the first charge–discharge and the intercalated and deintercalated Li quantity Δx were studied. The destruction of unstable 3b sites and phase transitions were discussed from the first and second charge–discharge curves of voltage vs. x in Li_xNi_0.9Co_0.1O₂. The LiNi_0.9Co_0.1O₂ sample synthesized from Li₂CO₃, NiO, and Co₃O₄ had the largest first discharge capacity (151 mA h/g), with a discharge capacity deterioration rate of −0.8 mA h/g/cycle (that is, a discharge capacity increasing 0.8 mA h/g per cycle).     

Low-temperature growth of well-crystalline Co3O4 hexagonal nanodisks as anode material for lithium-ion batteries

Uniform hexagonal-shaped cobalt oxide (Co₃O₄) nanodisks were prepared in large scale via facile aqueous solution based hydrothermal process at 110 °C. The detailed structural characterizations confirmed that the synthesized products are hexagonal cobalt oxide nanodisks, possessing very well-crystalline cubic spinel structure. A coin cell of type −2032 was assembled using the synthesized Co₃O₄ nanodisks and its charge–discharge profile was analyzed between the voltages 0.01 and to 2.5 V vs. Li/Li⁺ reference electrode. The electrochemical cell composed of Li/Co₃O₄ delivered an initial lithium insertion capacity of 2039 mAh/g. Although the cell exhibited high irreversible capacity during the first four cycles, the columbic efficiency has been improved upon cycling.     

Enhanced thermoelectric properties induced by chemical pressure in Ca3Co4O9

We report the investigation of boron substitution on structural, electrical, thermal, and thermoelectric properties of Ca_3−xB_xCo₄O₉ (x=0, 0.5, 0.75, and 1) in the temperature range between 300 K and 5 K. X-ray diffraction studies show that the Ca₃Co₄O₉ phase is successfully preserved as the majority phase in the x=0.5 sample despite the small size of boron ions. Electrical transport measurements confirm that B³⁺ substitution for Ca²⁺ causes an increase in resistivity due to the decrease in carrier concentration. x=0.5 sample is found to have a Seebeck coefficient of 181 μV/K at room temperature which is ~1.5 times higher than that of the pure Ca₃Co₄O₉. Our results indicate that the chemical pressure due to the large ionic radii difference between B³⁺ (0.27 Å) and Ca²⁺ (1 Å) enhances the thermoelectric properties as long as the unique crystal structure of Ca₃Co₄O₉ is preserved.     

Calibrated Co3O4 nanoparticles patterned in SBA-15 silicas: Accessibility and activity for CO oxidation

The catalytic performances in CO oxidation of Co₃O₄ nanoparticles patterned in the porosity of SBA-15 silicas are investigated. Accessibility limitations of the reactants to the catalytic sites are clearly revealed, when the Co₃O₄ nanoparticles are embedded in the SBA-15 pores. Despite these limitations, the synthesised Co₃O₄ nanoparticles exhibit promising CO oxidation properties.     

Optimization of preparation for Co3O4 by calcination from cobalt oxalate using response surface methodology

The conditions of technique to prepare Co₃O₄ by calcination from cobalt oxalate were optimized using response surface methodology. A quadratic equation model for decomposition rate was built and effects of main factors and their corresponding relationships were obtained. The statistical analysis of the results showed that in the range studied the decomposition rate of cobalt oxalate was significantly affected by the calcination temperature and calcination time. The optimized calcination conditions were as follows: the calcination temperature 680.86 K, the calcination time 44.7 min, and the mass of material 3.04 g, respectively. Under these conditions the decomposition rate of cobalt oxalate was 99.06%. The validity of the model was confirmed experimentally and the results were satisfactory.     

Co3O4 thin film prepared by a chemical bath deposition for electrochemical capacitors

Co₃O₄ thin film is synthesized on ITO by a chemical bath deposition. The prepared Co₃O₄ thin film is characterized by X-ray diffraction, and scanning electron microscopy. Electrochemical capacitive behavior of synthesized Co₃O₄ thin film is investigated by cyclic voltammetry, constant current charge/discharge and electrochemical impedance spectroscopy. Scanning electron microscopy images show that Co₃O₄ thin film is composed of spherical-like coarse particles, together with some pores among particles. Electrochemical studies reveal that capacitive characteristic of Co₃O₄ thin film mainly results from pseudocapacitance. Co₃O₄ thin film exhibits a maximum specific capacitance of 227 F g⁻¹ at the specific current of 0.2 A g⁻¹. The specific capacitance reduces to 152 F g⁻¹ when the specific current increases to 1.4 A g⁻¹. The specific capacitance retention ratio is 67% at the specific current range from 0.2 to 1.4 A g⁻¹.     

Novel promoting effect of SO2 on the selective catalytic reduction of NOx by ammonia over Co3O4 catalyst

Spinel nano-Co₃O₄ was prepared by solid-state reaction at room temperature and investigated for selective catalytic reduction of NO_x by NH₃ (NH₃-SCR). Although suffering from pore filling and plugging, treatment of this catalyst by SO₂ showed novel promoting effect on NH₃-SCR above 250 °C. Bulk cobalt sulfate was observed over the sulfated Co₃O₄ with XRD, which would be an active component for NH₃-SCR. The sulphated Co₃O₄ catalyst exhibited good resistance to SO₂ (500 ppm, 100 ppm) and 10% H₂O at a space velocity of about 25 000 h⁻¹ at 300 °C, as tested for 12 h.     

Porous Co3O4 nanoplatelets by self-supported formation as electrode material for lithium-ion batteries

In this paper, we have reported a simple and rapid approach for the large-scale synthesis of β-Co(OH)₂ nanoplatelets via the microwave hydrothermal process using potassium hydroxide as mineralizer at 140 °C for 3 h. Calcining the β-Co(OH)₂ nanoplatelets at 350 °C for 2 h, porous Co₃O₄ nanoplatelets with a 3D quasi-single-crystal framework were obtained. The process of converting the β-Co(OH)₂ nanoplatelets into the Co₃O₄ nanoplatelets is a self-supported topotactic transformation, which is easily controlled by varying the calcining temperature. The textural characteristics of Co₃O₄ products have strong positive effects on their electrochemical properties as electrode materials in lithium-ion batteries. The obtained porous Co₃O₄ nanoplatelets exhibit a low initial irreversible loss (18.1%), ultrahigh capacity, and excellent cyclability. For example, a reversible capacity of 900 mAh g⁻¹ can be maintained after 100 cycles.     

Comparison of AlPO4- and Co3(PO4)2-coated LiNi0.8Co0.2O2 cathode materials for Li-ion battery

Electrochemical and thermal properties of Co₃(PO₄)₂- and AlPO₄-coated LiNi_0.8Co_0.2O₂ cathode materials were compared. AlPO₄-coated LiNi_0.8Co_0.2O₂ cathodes exhibited an original specific capacity of 170.8 mAh g⁻¹ and had a capacity retention (89.1% of its initial capacity) between 4.35 and 3.0 V after 60 cycles at 150 mA g⁻¹. Co₃(PO₄)₂-coated LiNi_0.8Co_0.2O₂ cathodes exhibited an original specific capacity of 177.6 mAh g⁻¹ and excellent capacity retention (91.8% of its initial capacity), which was attributed to a lithium-reactive Co₃(PO₄)₂ coating. The Co₃(PO₄)₂ coating material could react with LiOH and Li₂CO₃ impurities during annealing to form an olivine Li_xCoPO₄ phase on the bulk surface, which minimized any side reactions with electrolytes and the dissolution of Ni⁴⁺ ions compared to the AlPO₄-coated cathode. Differential scanning calorimetry results showed Co₃(PO₄)₂-coated LiNi_0.8Co_0.2O₂ cathode material had a much improved onset temperature of the oxygen evolution of about 218 °C, and a much lower amount of exothermic-heat release compared to the AlPO₄-coated sample.     

Multifuctional Fe3O4@C/YVO4:Dy nanopowers: Preparation,luminescence and magnetic properties

As-synthesized Fe₃O₄ nanoparticles were encapsulated with carbon layers through a simple hydrothermal process. Fe₃O₄/C nanoparticles were coated with YVO₄:Dy³⁺ phosphors to form bifunctional Fe₃O₄@C@YVO₄:Dy³⁺ composites. Their structure, luminescence and magnetic properties were characterized by XRD, SEM, TEM, HRTEM, PL spectra and VSM. The experimental results indicated that the as-prepared bifunctional composites displayed well-defined core–shell structures. The ∼12 nm diameter YVO₄:Dy³⁺ shell exhibited tetragonal structure. Additionally, the composites exhibited a high saturation magnetization (13 emu/g) and excellent luminescence properties, indicating their promising potential as multifunctional biosensors for biomedical applications.     

Ultrasonic wave aided selective epoxidation of mixed styrene and α-pinene with air over nanosized Co3O4

Catalytic selective epoxidation of mixed biolefins with air over nanosized Co₃O₄ catalyst under mild ultrasonic conditions has been first reported. When the styrene/α-pinene molar ratio was 1:5, the highest conversions were, respectively, reached 81.8 mol% for styrene and 76.1 mol% for α-pinene, with the epoxidation selectivity of 84.1% (styrene oxide) and 94.6% (α-pinene oxide), notably higher than those of the conventional reactions under magnetic stirring. An intermolecular electron-transfer phenomenon between conjugated styrene and electron-rich α-pinene was revealed by UV–vis spectra, which was considerably important for the enhancement of reactivities of both olefinic molecules observed experimentally.     

Preparation and electrochemical capacitance of cobalt oxide (Co3O4) nanotubes as supercapacitor material

Cobalt oxide (Co₃O₄) nanotubes have been successfully synthesized by chemically depositing cobalt hydroxide in anodic aluminum oxide (AAO) templates and thermally annealing at 500 °C. The synthesized nanotubes have been characterized by scanning electron microscope (SEM), transmission electron microscope (TEM) and X-ray diffraction (XRD). The electrochemical capacitance behavior of the Co₃O₄ nanotubes electrode was investigated by cyclic voltammetry, galvanostatic charge-discharge studies and electrochemical impedance spectroscopy in 6 mol L⁻¹ KOH solution. The electrochemical data demonstrate that the Co₃O₄ nanotubes display good capacitive behavior with a specific capacitance of 574 F g⁻¹ at a current density of 0.1 A g⁻¹ and a good specific capacitance retention of ca. 95% after 1000 continuous charge-discharge cycles, indicating that the Co₃O₄ nanotubes can be promising electroactive materials for supercapacitor.     

Preparation, characterization and dielectric properties of CaCu3Ti4O12 ceramics

CaCu₃Ti₄O₁₂ nano-sized powders were successfully prepared by sol-gel technique and calcination at 600-900 °C. The thermal decomposition process, phase structures and morphology of synthesized powders were characterized by IR, DSC-TG, XRD, TEM, respectively. It was found that the main weight-loss and decomposition of precursors occurred below 450 °C and the complex perovskite phase appeared when the calcination temperature was higher than 700 °C. Using above synthesized powders as starting materials, CCTO-based ceramics with excellent dielectric properties (?₂₅ = 5.9 × 10⁴, tan δ = 0.06 at 1.0 kHz) were prepared by sintering at 1125 °C. According to the results, a conduction mechanism was proposed to explain the origin of giant dielectric constant in CCTO system.     

Corrosion mechanisms of Al2O3/MgAl2O4 by V2O5, NiO, Fe2O3 and vanadium slag

The effects of V₂O₅, NiO, Fe₂O₃ and vanadium slag on the corrosion of Al₂O₃ and MgAl₂O₄ have been investigated. The specimens of Al₂O₃ and MgAl₂O₄ with the respective oxides above mentioned were heated at 10 °C/min from room temperature up to three different temperatures: 1400, 1450 and 1500 °C. The corrosion mechanisms of each system were followed by XRD and SEM analyses. The results obtained showed that Al₂O₃ was less affected by the studied oxides than MgAl₂O₄. Alumina was only attacked by NiO forming NiAl₂O₄ spinel, while the MgAl₂O₄ spinel was attacked by V₂O₅ forming MgV₂O₆. It was also observed that Fe₂O₃ and Mg, Ni, V and Fe present in the vanadium slag diffused into Al₂O₃. On the other hand, the Fe₂O₃ and Ca, S, Si, Na, Mg, V and Fe diffused into the MgAl₂O₄ structure. Finally, the results obtained were compared with those predicted by the FactSage software.     

Ordered CoFe2O4 nanowire arrays with preferred crystal orientation and magnetic anisotropy

CoFe₂O₄ nanowire arrays were fabricated by electrodeposition of Fe²⁺ and Co²⁺ into anodic aluminum oxide (AAO) templates and further oxidization. The phase structure of the nanowires is cubic spinel-type, and the XRD result exhibits perfect preferred crystallite orientation along the nanowire axes. Compared with CoFe₂O₄ nanowire arrays synthesized by other methods, the magnetic hysteresis loops demonstrate that the arrays of nanowires exhibit uniaxial magnetic anisotropy with easy magnetization direction along the nanowire axes owing to the large shape anisotropy. This approach provides a facile technology to fabricate oxide nanowires with uniaxial magnetic anisotropy.