In situ facile synthesis of bimetallic CoNi catalyst supported on graphene for hydrolytic dehydrogenation of amine borane

Well dispersed magnetically recyclable bimetallic Co_xNi_1−x (x = 0, 0.1, 0.3, 0.5, 0.7, 0.9, 1) nanoparticles (NPs) supported on graphene have been synthesized via a facile in situ one-step procedure, using the mixture of sodium borohydride (NaBH₄) and methylamine borane (MeAB) as the reducing agent under ambient condition. These NPs were composition dependent for catalytic hydrolysis of amine boranes. Among all the CoNi/graphene catalysts tested, the Co_0.9Ni_0.1/graphene NPs exhibit the highest catalytic activity toward hydrolysis of AB with the turnover frequency (TOF) value of 16.4 (mol H₂ min⁻¹ (mol catalyst)⁻¹), being higher than that of most reported non-noble metal-based NPs, and even many noble metal-based NPs. Moreover, the activation energy (E_a) value is 13.49 kJ/mol, which is the second lowest value ever reported for catalytic hydrolytic dehydrogenation of ammonia borane, indicating the superior catalytic performance of the as-synthesized Co_0.9Ni_0.1/graphene catalysts. Additionally, Compared with other reducing agents, such as NaBH₄, AB, MeAB, and the mixture of NaBH₄ and AB, the as-synthesized Co_0.9Ni_0.1/graphene catalysts reduced by the mixture of NaBH₄ and MeAB exert the highest catalytic activity. The Co_0.9Ni_0.1 NPs supported on graphene exhibit higher catalytic activity than catalysts with other conventional supports, such as SiO₂, carbon black, and γ-Al₂O₃. Furthermore, the as-synthesized Co_0.9Ni_0.1/graphene NPs show good recyclability and magnetically reusability for the hydrolytic dehydrogenation of amine boranes, which make the practical reusing application of the catalysts more convenient.     

Ruthenium supported on MIL-96: An efficient catalyst for hydrolytic dehydrogenation of ammonia borane for chemical hydrogen storage

For the first time, ultrafine Ru nanoparticles with mean diameter of 2 nm are successfully deposited on MIL-96 by using a simple liquid impregnation strategy, and tested for catalytic hydrolysis of ammonia borane. The powder X-ray diffraction, N₂ physical adsorption, transmission electron microscopy, energy-dispersive X-ray spectroscopy and inductively coupled plasma-atomic emission spectroscopy measurements are employed to characterized the Ru/MIL-96 catalysts. Thanks to the unique 3D structure of MIL-96, Ru NPs supported on MIL-96 exhibit much enhanced catalytic activity compared with other commercial supported materials and graphene, with the TOF value of 231 mol H₂ min⁻¹ (mol Ru)⁻¹, which is among the highest value ever reported. Moreover, this simple method can be extended to facile synthesis of other MOFs supported monometallic and polymetallic NPs for more application.     

Efficient hydrolytic dehydrogenation of ammonia borane over ultrafine Ru nanoparticles supported on biomass-derived porous carbon

Ammonia borane hydrolysis is a promising strategy for developing sustainable hydrogen energy. However, this reaction is not kinetically feasible at ambient temperature, thus developing a proper catalyst is indispensable. In this work, Porous carbon is facilely prepared from cattail fibers by using K₂CO₃, and then used to stabilize Ru nanoparticles. The effects of different synthesis parameters for the biomass-derived carbon supports (e. g. K₂CO₃ dosage and calcination temperature) and various catalytic reaction conditions (e. g. the amounts of the catalysts, ammonia borane and NaOH, and reaction temperature) on the hydrolysis rate of ammonia borane are investigated. Benefitting from the interconnected hierarchical pores of the optimal porous carbon (p-C), which was prepared with a mass ratio of 6 : 1 for K₂CO₃ to cattail fibers and calcined at 873 K, and the high dispersion of Ru nanoparticles, the optimal Ru/p-C catalysts exhibit excellent catalytic performance. The corresponding apparent activation energy (28.8 kJ mol^?1) and turnover frequency (744.7 min^?1 in alkaline solution) are superior to many catalysts previously reported. This work offers a competitive catalyst for the hydrolytic dehydrogenation of chemical hydrogen storage materials.     

Monodisperse PtCu alloy nanoparticles as highly efficient catalysts for the hydrolytic dehydrogenation of ammonia borane

Pt-M alloy nanoparticles (NPs) with well-defined size and compositions exhibit dramatically catalytic performance in chemical reactions. In this work, monodisperse PtCu NPs with controlled size and compositions were synthesized by the co-reduction method in the presence of oleylamine. These NPs have excellent catalytic activities in the hydrolytic dehydrogenation of ammonia borane (AB) and their activities were composition dependent. Among the different-composition PtCu NPs, the Cu₅₀Pt₅₀ NPs exhibit the highest catalytic activity with an initial turnover frequency of 102.5 mol_(hydrogen)·mol_(catalyst)^?1·min^?1 and an apparent activation energy of 36 kJ·mol^?1, which demonstrate the validity of partly replacing Pt by a first-row transition metal on constructing high performance heterogeneous nanocatalysts for the hydrolytic dehydrogenation of AB.     

Room temperature hydrolytic dehydrogenation of ammonia borane catalyzed by Co nanoparticles

Amorphous and well dispersed Co nanoparticles (less than 10 nm) have been in situ synthesized in aqueous solution at room temperature. The as-synthesized Co nanoparticles possess high catalytic activity (1116 L mol⁻¹ min⁻¹) and excellent recycling property for the hydrogen generation from aqueous solution of ammonia borane under ambient atmosphere at room temperature. The present low-cost catalyst, high hydrogen generation rate and mild reaction conditions (at room temperature in aqueous solution) represent a promising step toward the development of ammonia borane as a viable on-board hydrogen-storage and supply material.     

Hexagonal boron nitride supported ruthenium nanoparticles as highly active catalysts for ammonia borane hydrolysis

Ammonia borane (AB) hydrolysis is a comparative strategy for developing the sustainable hydrogen economy. Considering the hydrolysis cannot occur kinetically at low temperature, a suitable catalyst is indispensable. In this work, the dispersed ruthenium nanoparticles are stabilized on hexagonal boron nitride (h-BN) via an adsorption-in situ reduction procedure. Various characterization techniques are adopted for elucidating the structure-performance relationship of the obtained catalysts for the hydrolytic dehydrogenation of AB. In the presence of the resultant Ru/h-BN catalysts, the corresponding turnover frequency (1177.5 min^?1) in alkaline solution at 303 K and the apparent activation energy (24.1 kJ mol^?1) are superior to most literature previously reported. Our work provides a facile fabrication method for metal-based catalysts, which are highly promising in chemical storage material hydrolysis.     

Palladium nanoparticles supported on chemically derived graphene: An efficient and reusable catalyst for the dehydrogenation of ammonia borane

Chemically derived graphene (CDG) was prepared by hydrazine hydrate reduction of graphene oxide and used as support for palladium nanoparticles (Pd NPs) generated ex situ with controllable particle size and dispersion. The Pd NPs supported on CDG were well characterized by using a combination of advance analytical techniques and employed as catalyst in the dehydrogenation and hydrolysis of ammonia borane (AB) in organic solvents and aqueous solutions, respectively. Monodisperse Pd NPs of 4.5 nm were prepared from the reduction of palladium(II) acetylacetonate by tert-butylamine borane in the presence of oleylamine. They were readily impregnated on CDG which has BET surface area of 500 m² g⁻¹. Pd NPs retain their particle size dispersion and stability when supported on chemically derived graphene. The resulting materials are highly active and stable catalyst for the dehydrogenation and hydrolysis of AB. In addition to their high activity and stability, these Pd NPs are also reusable catalyst in both dehydrogenation and hydrolysis of AB preserving 85% and 95% of initial activity after 5th and 10th runs, respectively.     

Hydrolytic dehydrogenation of ammonia borane catalyzed by carbon supported Co core-Pt shell nanoparticles

Co core-Pt shell nanoparticles (denoted as Co_1−x@Pt_x where x = 0.33, 0.43, 0.60, 0.68, 0.82) and carbon supported Co core-Pt shell nanoparticles (denoted as Co_1−x@Pt_x/C where x = 0.60, 0.68, 0.82) (Co_1−x@Pt_x/C = 43%), which are synthesized through a polyol reduction process with oleic acid as a surfactant, have been investigated as catalysts for hydrogen generation from hydrolysis of ammonia borane (NH₃BH₃) at 25 ± 0.5 °C. The as-prepared Co core-Pt shell nanoparticles are uniformly dispersed on carbon surface with diameters of about 3 nm. It is found that the catalysts show favorable performance toward the hydrolysis of NH₃BH₃ and the catalytic activity is associated with the ratio of Pt to Co. Among the catalysts studied, Co_0.32@Pt_0.68/C (Co_0.32@Pt_0.68/C = 43%) displays the highest catalytic performance, delivering a high hydrogen-release rate of 4874 mL min⁻¹ g⁻¹ (per catalyst).     

CoMoB nanoparticles supported on foam Ni as efficient catalysts for hydrogen generation from hydrolysis of ammonia borane solution

We report on CoMoB nanoparticles supported on foam Ni as catalysts for hydrogen generation from hydrolysis of ammonia borane (NH₃BH₃) solution. The CoMoB/foam Ni catalysts with different molar ratios of Co²⁺and MoO₄²⁻ were synthesized via the electroless-deposition technique at ambient temperature. In order to analyze the phase composition, chemical composition, microstructure, and electron bonding structure of the as-prepared samples, powder X–ray diffraction (XRD), inductively coupled plasma-mass spectroscopy (ICP-MS), scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) were used. The results showed that CoMoB nanoparticles were variously dispersed on the surface of the foam Ni and the catalytic activity correlated with the molar ratio of Co²⁺ and MoO₄²⁻. The highest hydrogen generation rate was 5331.0 mL min⁻¹ g_cat⁻¹ at 298 K, and the activation energy was calculated to be 45.5 kJ mol⁻¹ toward the hydrolysis of NH₃BH₃ solution. The better catalytic activity was largely attributed to the smaller particle size, higher surface roughness and the novel three-dimensional cone-like architectures of the obtained samples. The kinetic results show that the hydrolysis of NH₃BH₃ is a first-order reaction in catalyst concentration. In addition, the reusability experiment exhibited that the catalytic activity was reduced after 5 cycles and the reason of the decay was also investigated.     

Pd nanoparticles supported on MIL-101 as high-performance catalysts for catalytic hydrolysis of ammonia borane

Well dispersed ultrafine Pd NPs have been immobilized in the framework of MIL-101, and tested for the catalytic hydrolysis of ammonia borane. The powder XRD, N₂ adsorption–desorption, TEM, and ICP-AES were employed to characterize the Pd@MIL-101 catalyst. The as-synthesized Pd@MIL-101 exhibit the highest catalytic activity toward hydrolysis of AB among the Pd-based nano-catalysts ever reported, with the TOF value of 45 mol H₂ min⁻¹ (mol Pd)⁻¹.     

Group 4 oxides supported Rhodium(0) catalysts in hydrolytic dehydrogenation of ammonia borane

Rh³⁺ ions are first impregnated on Group 4 metal oxides (TiO₂, ZrO₂, HfO₂) in aqueous solution and, then reduced with aqueous solution of NaBH₄ to form rhodium(0) nanoparticles (NPs) on the oxide surface. The analyses reveal that Rh(0) NPs are highly dispersed on the surface of TiO₂, ZrO₂, HfO₂. Rh⁰/MO₂ (M: Ti, Zr, Hf) NPs have high activity and reusability in releasing H₂ from the hydrolysis of ammonia borane with an initial turnover frequency of 643, 198, and 188 min⁻¹, respectively, at 25.0 ± 0.1 °C. The reusability of Rh⁰/ZrO₂ and Rh⁰/HfO₂ catalysts is higher than that of the Rh⁰/TiO₂ catalyst.     

Co-SiO2 nanosphere-catalyzed hydrolytic dehydrogenation of ammonia borane for chemical hydrogen storage

Cobalt clusters-silica nanospheres (15-30 nm) were synthesized using a Co(NH₃)₆Cl₃ template method in a polyoxyethylene-nonylphenyl ether/cyclohexane reversed micelle system followed by in situ reduction in aqueous NaBH₄/NH₃BH₃ solutions. The cobalt clusters are located either inside or on the outer surface of the silica nanospheres as shown by the transmission electron microscope (TEM)/energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) measurements. The cobalt-silica nanospheres have a high catalytic activity for the hydrolysis of ammonia borane that generates a stoichiometric amount of hydrogen, and can be efficiently cycled and reused 10 times without any significant loss of the catalytic activity.     

Amino-group and space-confinement assisted synthesis of small and well-defined Rh nanoparticles as efficient catalysts toward ammonia borane hydrolysis

Hydrogen evolution from ammonia borane (AB) hydrolysis is of great importance considering the ever-increasing demand for green and sustainable energy. However, the development of a facile and efficient strategy to construct high-performance catalysts remains a grand challenge. Herein, we report an amino-group and space-confinement assisted strategy to fabricate Rh nanoparticles (NPs) using amino-functionalized metal-organic-frameworks (UiO-66-NH₂) as a NP matrix (Rh/UiO-66-NH₂). Owing to the coordination effect of amino-group and space-confinement of UiO-66-NH₂, small and well-distributed Rh NPs with a diameter of 3.38 nm are successfully achieved, which can be served as efficient catalysts for AB hydrolysis at room temperature. The maximum turnover frequency of 876.7 min^?1 is obtained by using the Rh/UiO-66-NH₂ with an optimal Rh loading of 4.38 wt% and AB concentration of 0.2 M at 25 °C, outperforming most of the previously developed Rh-based catalysts. The catalyst is also stable in repetitive cycles for five times. The high performance of this catalyst must be ascribed to the structural properties of UiO-66-NH₂, which enable the formation of small and well-dispersed Rh NPs with abundant accessible active sites. This study provides a simple and efficient method to significantly enhance the catalytic performance of Rh for AB hydrolysis.     

PVP-stabilized platinum nanoparticles supported on modified silica spheres as efficient catalysts for hydrogen generation from hydrolysis of ammonia borane

Ammonia borane (AB) is considered to be a promising solid hydrogen carrier. In this work, poly(N-vinyl-2-pyrrolidone) (PVP)-protected platinum nanoparticles are supported on γ-methacryloxypropyltrimethoxysilane (γ-MPS) modified silica spheres (Pt-PVP/SiO₂(M)), which are firstly used as highly efficient catalysts for hydrolysis of AB. Platinum nanoparticles possess a tiny size of 2–3 nm and are uniformly dispersed over modified silica spheres. Pt-PVP/SiO₂(M) catalysts with a Pt loading amount of 1.30 wt% show the highest catalytic activity with a turnover frequency (TOF) value of 371 mol_H2 mol_Pt^?1 min^?1 (866 mol_H2 mol_Pt^?1 min^?1 corrected for the surface atoms) at 25 °C. The activation energy is calculated to be 46.2 kJ/mol. Furthermore, owing to the synergistic effect between the modifier of silica spheres and the capping agent of metal nanoparticles, Pt-PVP/SiO₂(M) catalysts have a higher loading amount (8.7 and 6.5 times) and TOF value (4.8 and 5.5 times) than the counterparts prepared without γ-MPS and PVP, respectively.     

Ru nanoparticles loaded on tannin immobilized collagen fibers for catalytic hydrolysis of ammonia borane

A kind of Ru-based catalyst was prepared by using a natural polyphenolic polymer (bayberry tannin, BT) immobilized on collagen fiber (CF) as the stabilizer and carrier of Ru nanoparticles (NPs) and characterized to detect its main physicochemical properties. The CF-BT-Ru catalyst was found to be in an orderly fiber morphology with Ru NPs with about diameter of 2.6 nm highly distributed on the surface. The research on catalytic activity of CF-BT-Ru focused on the hydrolysis of ammonia borane (AB) to produce hydrogen. The influences of Ru loading, Ru dosage, AB concentration and temperature on the catalytic AB hydrolysis were investigated in detail, and the related thermodynamic parameters (activation energy (E_a), activation entropy (△S), activation enthalpy (△H) and Gibbs free energy (△G)) were calculated. The experimental results indicated that CF-BT-Ru exhibited high catalytic activity. Its turnover frequency (TOF) was as high as 322 ${\text{mol}}_{{\text{H}}_2}?{\text{mol}}_{\text{Ru}}^{?1}?{\text{min}}^{?1}$ and E_a was as low as 32.41 kJ mol^?1 for AB hydrolysis. Moreover, CF-BT-Ru exhibited satisfied reusability and stability. Its activity lost only one-fifth and no obvious agglomeration and leakage of Ru NPs were found after repeated use for 5 times.     

Boron nitride supported NiCoP nanoparticles as noble metal-free catalyst for highly efficient hydrogen generation from ammonia borane

Herein, ternary metal phosphides NiCoP nanoparticles supported on porous hexagonal boron nitride (h-BN) was fabricated via hydrothermal-phosphorization strategy. The as-prepared Ni_0.8Co_1.2P@h-BN exhibited excellent catalytic performance for the hydrogen generation from ammonia borane (AB) hydrolysis, with an initial turnover frequency of 86.5 mol(H₂) mol(Ni_0.8Co_1.2P) ⁻¹ min⁻¹ at 298 K. The experimental outcome can be attributed to the synergistic effect between Ni, Co and P, as well as the strong metal-support interaction between NiCoP and h-BN. This study presents a new paradigm for supporting transition metal phosphides, and provides a new avenue to develop high performance and low cost non noble metal catalysts for hydrolysis of AB.     

Diammonium tetraborate dihydrate as hydrolytic by-product of ammonia borane in aqueous alkaline conditions

Ammonia borane NH₃BH₃ is able to generate H₂ by catalytic hydrolysis at ambient conditions. Such a potential has been much studied but the hydrolysis by-products, i.e. ammonium borates, have been little studied. As such we undertook a systematic work aiming at getting a sound understanding of the borates forming by hydrolysis. Contrary to what is commonly believed, NH₃BH₃ (10 M) in aqueous alkaline (pH = 8) solution is not completely stable. Spontaneous hydrolysis takes place, resulting in the formation of by-products and precipitation of borate crystals. This means that long-term storage of concentrated AB solution is not possible. The borate crystals were analyzed with the help of various techniques and was identified as being diammonium tetraborate dihydrate (NH₄)₂B₄O₅(OH)₄⋅2H₂O (263.39 g mol⁻¹). The crystal structure was solved and found to be monoclinic with a space group P2₁. The borate is an analog of borax Na₂B₄O₅(OH)₄⋅8H₂O. These results, among others, are reported in details hereafter and they are discussed in order to bring elements of response to the questions concerning storage of aqueous NH₃BH₃ and recyclability of such a borate.     

Oleylamine-stabilized Cu0.9Ni0.1 nanoparticles as efficient catalyst for ammonia borane dehydrogenation

Monodisperse CuNi nanoparticles are conveniently prepared by the reduction of cupric acetate and nickel(II) acetylacetonate in the presence of oleylamine and borane tributylamine under inert gas atmosphere. It is found that among the CuNi system, Cu_0.9Ni_0.1 shows the best performance for catalyzing the dehydrogenation of ammonia borane. In total, 2.5 equiv. of hydrogen per ammonia borane is generated even at room temperature with an initial turnover frequency value of 212.3 mol of H₂·(mol of Cu_0.9Ni_0.1)^?1·h^?1, which is comparable to the best Pd-based catalyst ever reported. The remarkable catalytic performance is attributed to the mild affiliation of oleylamine (OAm) to NPs, which not only stabilizes NPs to maintain good dispersion but also leaves sufficient surface active sites to facilitate the catalytic reaction. This low-cost and high catalytic performance catalyst makes it an exciting alternative towards the application of ammonia borane as a hydrogen storage material for fuel cell applications.     

Hollow Ni-SiO2 nanosphere-catalyzed hydrolytic dehydrogenation of ammonia borane for chemical hydrogen storage

Nickel clusters contained within silica nanospheres (20-30 nm) were synthesized by using a Ni(NH₃)₆Cl₂ crystal template method in a polyoxyethylene-nonylphenyl ether/cyclohexane reversed micelle system followed by an in situ reduction in aqueous NaBH₄/NH₃BH₃ solutions. Metallic nickel clusters exist inside the SiO₂ nanospheres prepared by the method while oxidized nickel clusters prepared by the conventional impregnation method were supported on the outer surface of silica as shown in the results of transmission electron microscope (TEM)/energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) measurements. The nickel clusters inside of silica nanospheres show higher catalytic activity for hydrolysis of ammonia borane to generate stoichiometric amount of hydrogen than the supported nickel catalysts.