Optical and structural properties of TiO2 thin films prepared by sol-gel spin coating

Hydrogen is a renewable and non-polluting fuel. Its production from water using renewable energy is an attractive challenge. In this work we report some results on the preparation of titanium oxide TiO₂ thin films for environmental applications such as water photosplitting. TiO₂ thin films have been prepared by spin coating technique of sol precursor onto glass substrates. The deposited films were annealed at different temperatures in air. The X-ray diffraction (XRD) experiments show that the two well-known anatase and rutile phases were observed depending both on the conditions of deposition and on the temperature of annealing. The best conditions of crystallization were found to be around 400 °C in air. The influence of the number of deposited layer on the crystalline quality of the films was investigated. The surface morphology of the deposited film was characterized by atomic force microscopy (AFM) and scanning electronic microscopy (SEM). The UV-Vis-NIR spectroscopy shows that the film exhibits a high transmission around 90%. The best layers were obtained when concentrated (HCl) was added to the sol solutions. The direct band gap of the films was found to be around 3.7 eV, and their refractive index was found to vary from 2 to 2.4.     

Heterostructured (Ba,Sr)TiO3/TiO2 core/shell photocatalysts: Influence of processing and structure on hydrogen production

Heterostructured powders composed of microcrystalline (mc-) BaTiO₃ and SrTiO₃ cores coated with nanostructured (ns-) TiO₂ shells were prepared using a sol–gel method. The influences of annealing temperature, coating thickness, cocatalyst loading, and core size on photocatalytic hydrogen production were experimentally determined. The amount of hydrogen produced depends on the annealing temperature, which influences the interface, phase composition, light absorption, crystallinity, mesoporosity, and surface area. The heterostructured powders produced more hydrogen than ns-TiO₂ alone when annealed between 500 °C and 800 °C. The amount of hydrogen produced by heterostructures with 100–150 nm thick nanostructured titania coatings was greater than for thicker or thinner coatings. The optimum Pt loading was determined to be 1% by weight. Heterostructured powders consisting of mc-BaTiO₃/ns-TiO₂ produce more hydrogen than those with nano-sized BaTiO₃ cores, suggesting a size effect that is counter to the conventional relationship between catalytic activity and particle size.     

Effect of bath temperature and annealing on the formation of CuInSe2

CuInSe₂ films of 2 μm thickness were electrodeposited potentiostatically, from aqueous solution containing thiocyanate as a complexing agent, on Mo substrates. For all the experiments, the potential of the potentiostatic deposition of the materials was chosen to be −1 V, whereas the bath temperature of electrolyte was varied from 20 to 80 °C. It was found that the electrodeposited CuInSe₂ was characterized by an amorphous layer and densely-packed nanometric grains with a good homogeneity. After vacuum annealing at 200 °C, glancing angle X-ray diffraction revealed the presence of the CuInSe₂ phase whereas annealing under selenium atmosphere lead to the growth of molybdenum selenide compound MoSe₂, in addition to a better crystallization of the copper indium diselenide compound. Scanning electron microscopic revealed that despite an increase in the grains dimensions, there was no significant change in the films surface morphology when the bath temperature was varied from 20 to 80 °C. At the same time, the composition of the electrodeposited Cu-In-Se layers becomes richer in copper. This increase in copper concentration is mainly compensated by a deficit in selenium atoms.     

Studies on Cu2ZnSnS4 (CZTS) absorber layer using different stacking orders in precursor thin films

Cu₂ZnSnS₄ (CZTS) thin films were deposited by sputtering on glass substrates using stacked precursors. The stacked precursor thin films were prepared from Cu, SnS₂ and ZnS targets at room temperature with different stacking orders of Cu/SnS₂/ZnS/glass (A), ZnS/Cu/SnS₂/glass (B) and SnS₂/ZnS/Cu/glass (C). The stacked precursor thin films were sulfurized using a tubular rapid thermal annealing system in a mixed N₂ (95%)+H₂S (5%) atmosphere at 550 °C for 10 min. The effects of the stacking order in the precursor thin films on the structural, morphological, chemical, electrical and optical properties of the CZTS thin films were investigated. X-ray diffraction, Raman spectroscopy and X-ray photoelectron spectroscopy studies showed that the annealed CZTS thin film using a stacking order A had a single kesterite crystal structure without secondary phases, whereas stacking orders B and C have a kesterite phase with secondary phases, such as Cu_2−xS, SnS₂ and SnS. The annealed CZTS thin film using stacking order A showed a very dense morphology without voids. On the other hand, the annealed CZTS thin films using stacking orders B and C contained the volcano shape voids (B) and Sn-based secondary phases (C) on the surface of the annealed thin films. The direct band gap energies of the CZTS thin films were approximately 1.45 eV (A), 1.35 eV (B) and 1.1 eV (C).     

Enhancement of the H2 desorption properties of LiAlH4 doping with NiCo2O4 nanorods

Lithium aluminum hydride (LiAlH₄) is considered as an attractive candidate for hydrogen storage owing to its favorable thermodynamics and high hydrogen storage capacity. However, its reaction kinetics and thermodynamics have to be improved for the practical application. In our present work, we have systematically investigated the effect of NiCo₂O₄ (NCO) additive on the dehydrogenation properties and microstructure refinement in LiAlH₄. The dehydrogenation kinetics of LiAlH₄ can be significantly increased with the increase of NiCo₂O₄ content and dehydrogenation temperature. The 2 mol% NiCo₂O₄-doped LiAlH₄ (2% NCO–LiAlH₄) exhibits the superior dehydrogenation performances, which releases 4.95 wt% H₂ at 130 °C and 6.47 wt% H₂ at 150 °C within 150 min. In contrast, the undoped LiAlH₄ sample just releases <1 wt% H₂ after 150 min. About 3.7 wt.% of hydrogen can be released from 2% NCO–LiAlH₄ at 90 °C, where total 7.10 wt% of hydrogen is released at 150 °C. Moreover, 2% NCO–LiAlH₄ displayed remarkably reduced activation energy for the dehydrogenation of LiAlH₄.     

Influence of surfactants on Fe2O3 nanostructure photoanode

Fe₂O₃ nanostructures photoanodes were prepared via sol–gel spin-coating method onto fluorine-doped tin oxide glass substrates using six different surfactants: polyethylene glycol (PEG-300), Triton X-100, pluronic F127, cetyltrimethylammonium bromide (CTAB), octadecyltrimethylammonium bromide (OTAB) and tetradecyltrimethylammonium bromide (TTAB). The resulting films have thickness from 520 ± 10 to 980 ± 10 nm after calcinations at 450 °C in the air. A comparative study of photocatalytic activity of thin films was performed. The photo-generated samples were determined by measuring the currents and voltages under illumination of UV–vis light. The highest photocurrent density of 1.77 mA/cm² at 1 V/SCE, under illumination intensity of 100 mW cm⁻² from a solar simulator with a global AM 1.5 filter, were produced by TTAB treated sample. The optical properties, morphology, surface roughness and structure of the films were also characterized by UV–visible spectroscopy, SEM, AFM and XRD. The results are consistent with photocatalytic performance: TTAB treated sample has the highest grain size and optical absorption. The improved performance of this sample can be attributed to the crystallinity process of TTAB, which leads to the larger grain size and highest photocatalytic activity. The study demonstrates that photoelectrochemical performance of metal oxide can be improved by simply changing surfactant. The results highlighted the superior performance of cationic surfactants over non-ionic surfactants in preparing Fe₂O₃ photoanodes by sol–gel method. Moreover, the study showed that decreasing hydrocarbon tail of cationic surfactants can increase the crystallite size and improve photocatalytic activity.     

p-Type CuSbS2 thin films by thermal diffusion of copper into Sb2S3

We report the preparation of copper antimony sulfide (CuSbS₂) thin films by heating Sb₂S₃/Cu multilayer in vacuum. Sb₂S₃ thin film was prepared from a chemical bath containing SbCl₃ and Na₂S₂O₃ salts at room temperature (27 °C) on well cleaned glass substrates. A copper thin film was deposited on Sb₂S₃ film by thermal evaporation and Sb₂S₃/Cu layers were subjected to annealing at different conditions. Structure, morphology, optical and electrical properties of the thin films formed by varying Cu layer thickness and heating conditions were analyzed using different characterization techniques. XRD analysis showed that the thin films formed at 300 and 380 °C consist of CuSbS₂ with chalcostibite structure. These thin films showed p-type conductivity and the conductivity value increased with increase in copper content. The optical band gap of CuSbS₂ was evaluated as nearly 1.5 eV.     

H2 sensors based on WO3 thin films activated by platinum nanoparticles synthesized by electroless process

Platinum (Pt) nanoparticles were successfully synthesized on tungsten oxide (WO₃) thin films by electroless process without any further post-treatment. The prepared Pt nanoparticles were characterized by X-ray diffraction, X-ray photoelectron spectroscopy and field-emission scanning electron microscopy. Gas sensors based on the Pt–WO₃ films were found to provide repeatable and significant responses to ppm-level H₂. The size of Pt nanoparticles increases with the deposition time and has improved the sensing characteristics of the sensors. The work in this paper paves a facile way to the fabrication of Pt nanoparticles on metal oxide surface at a low temperature (68 °C).     

Hydrogen generation from photocatalytic water splitting over TiO2 thin film prepared by electron beam-induced deposition

Photocatalytic TiO₂ thin films were prepared via an electron beam-induced deposition (EBID) method. The effects of post-calcination treatment on the properties of the prepared TiO₂ thin films were studied. X-ray diffraction (XRD), scanning electron microscope-energy dispersive spectrometry (SEM-EDS), and UV–V is absorption spectrometry were performed to reveal the crystallinity, surface morphology, chemical composition, and light absorbance of the prepared TiO₂ thin films. The photoelectrochemical characteristics of the TiO₂ thin films were investigated with a potentiostat. Under UV irradiation, a photocurrent of ˜2.1 mA was observed for the TiO₂ thin film with post-calcination at 500 °C. A water-splitting reaction was conducted over the TiO₂ thin film with the best photoelectrochemical performance. The yields of hydrogen and oxygen were 59.8 and 30.6 μmole, respectively, after 8 h of reaction under UV irradiation.     

Activity and selectivity of CO oxidation in H2 rich stream over the Ag/Co/Ce mixed oxide catalysts

Silver, cobalt and ceria mixed oxide catalysts were prepared at different metal/metal oxide molar ratios by the co-precipitation method, calcined at different temperatures (200 °C, 450 °C) and tested for the selective CO oxidation reaction in H₂ rich gas stream. XRD, XPS, N₂ physisorption, SEM and TPR-H₂ techniques were used to characterize the catalysts. Catalysts have an average pore diameter in the mesoporous range. Catalysts which were calcined at 200 °C had amorphous phase structure. After calcination at 450 °C, not only the crystal phase structure but also decrease in BET surface areas of the catalysts and the shift at light off temperatures of the catalysts to the higher temperatures were obtained. The highest activity and selectivity was obtained from the catalysts calcined 200 °C which were 50/50 Ag–Co and 50/50 Co–Ce mixed oxide catalysts, respectively, which did not loose their activity and selectivity in a reaction period of 5800 min.     

Influence of metal oxide on LiBH4/2LiNH2/MgH2 system for hydrogen storage properties

In this study, various nanoscale metal oxide catalysts, such as CeO₂, TiO₂, Fe₂O₃, Co₃O₄, and SiO₂, were added to the LiBH₄/2LiNH₂/MgH₂ system by using high-energy ball milling. Temperature programmed desorption and MS results showed that the Li–Mg–B–N–H/oxide mixtures were able to dehydrogenate at much lower temperatures. The order of the catalytic effect of the studied oxides was Fe₂O₃ > Co₃O₄ > CeO₂ > TiO₂ > SiO₂. The onset dehydrogenation temperature was below 70 °C for the samples doped with Fe₂O₃ and Co₃O₄ with 10 wt.%. More than 5.4 wt.% hydrogen was released at 140 °C. X-ray diffraction indicated that the addition of metal oxides inhibited the formation of Mg(NH₂)₂ during ball milling processes. It is thought that the changing of the ball milling products results from the interaction of oxide ions in metal oxide catalysts with hydrogen atoms in MgH₂. The catalytic effect depends on the activation capability of oxygen species in metal oxides on hydrogen atoms in hydrides.     

Photoelectrochemical water splitting at nanostructured α-Fe2O3 electrodes

In this study, nanostructured α-Fe₂O₃ thin films were deposited by simple electrodeposition for photoelectrochemical water splitting. Post-annealing temperature was found to have drastic effect on photoactivity of these films. SEM analysis illustrated that size of nanoparticles increases with annealing temperature. The current–potential characteristics showed that the water-splitting photocurrent strongly depends on post-annealing temperature. A maximum photocurrent density of 0.67 mA/cm² was observed at 1.23 V versus reversible hydrogen electrode (RHE) under standard illumination conditions (AM 1.5 G 100 mW/cm²), and the water-splitting current was over 1.0 mA/cm² before the dark current flow starts (at 1.55 V versus RHE). The electrode shows an onset potential as low as 0.8 V (versus RHE) for water photooxidation, which is one of the best results reported for hematite photoanodes. This high photoactivity of electrodes is attributed to the preferential growth of hematite nanostructures along the most conductive plane (001) and incorporation of Sn in film from the substrate at high annealing temperature. The best-performing electrode shows an incident photon conversion efficiency (IPCE) of 12% at 400 nm (in 1 M NaOH at 1.23 V versus RHE), which indicate the improved light-harvesting properties of these nanostructures.     

TiO2 thin films - Influence of annealing temperature on structural, optical and photocatalytic properties

Nanostructured TiO₂ thin films were deposited on glass substrates by sol-gel dip coating technique. The structural, morphological and optical characterizations of the as deposited and annealed films were carried out using X-ray diffraction (XRD), Raman spectroscopy, atomic force microscopy (AFM), and UV-vis transmittance spectroscopy. As-deposited films were amorphous, and the XRD studies showed that the formation of anatase phase was initiated at annealing temperature close to 400 °C. The grain size of the film annealed at 600 °C was about 20 nm. The lattice parameters for the films annealed at 600 °C were a = 3.7862 ? and c = 9.5172 ?, which is close to the reported values of anatase phase. Band gap of the as deposited film was estimated as 3.42 eV and was found to decrease with the annealing temperature. At 550 nm the refractive index of the films annealed at 600 °C was 2.11, which is low compared to a pore free anatase TiO₂. The room temperature electrical resistivity in the dark was of the order of 4.45 × 10⁶ ohm-cm. Photocatalytic activity of the TiO₂ films were studied by monitoring the degradation of aqueous methylene blue under UV light irradiation and was observed that films annealed above 400 °C had good photocatalytic activity which is explained as due to the structural and morphological properties of the films.     

Investigations on electron beam evaporated Cu(In0.85Ga0.15)Se2 thin film solar cells

CIGS bulk with composition of CuIn_0.85Ga_0.15Se₂ was synthesized by direct reaction of elemental copper, indium, gallium and selenium. CIGS thin films were then deposited onto well-cleaned glass substrates using the prepared bulk alloy by electron beam deposition method. The structural properties of the deposited films were studied using X-ray diffraction technique. The as-deposited CIGS films were found to be amorphous. On annealing, the films crystallized with a tetragonal chalcopyrite structure. An intermediate Cu-rich phase precipitated at 200 °C and dissociated at higher annealing temperatures. Average grain size calculated from the XRD spectra indicated that the films had a nano-crystalline structure and was further corroborated by AFM analysis of the sample surface. The chemical constituents present in the deposited CIGS films were identified using energy dispersive X-ray analysis. CIGS based solar cells were then fabricated on molybdenum and ITO coated glass substrates and the efficiencies have been evaluated.     

Thermal decomposition of non-catalysed MgH2 films

Nanocrystalline Mg films with thicknesses between 45 and 900 nm were prepared by e-beam on fused-SiO₂ substrates and hydrogenated at 280 °C to investigate the H-absorption/desorption process. Films were characterized by XRD, RBS, Raman, FEG, “in situ” optical measurements and TPD-MS. Whereas practically full conversion into MgH₂ is observed in thinner films (d < 150–200 nm), higher amount of hydrogen is not absorbed by thicker films (d > 200–250 nm) that is attributed to the formation of Mg₂Si–MgO phases (observed by RBS and Raman) as well as the slow kinetics of MgH₂ formation. H-desorption process is controlled by a nucleation and growth process and hydrogen is released at lower desorption temperatures (T_d = 425 °C) than bulk MgH₂. T_d are slightly lower (ΔT ∼ 25 °C) in thickest hydrogenated films (d > 200–250 nm) suggesting an influence of Mg₂Si and MgO phases, formed during hydrogenation.     

Enhanced electrical properties of pulsed laser-deposited CuIn0.7Ga0.3Se2 thin films via processing control

Polycrystalline CuIn_0.7Ga_0.3Se₂ thin films were prepared on soda-lime glass substrates using pulsed laser deposition (PLD) with various process parameters such as laser energy, repetition rate and substrate temperature. It was confirmed that there existed a limited laser energy, i.e. less than 300 mJ, to get phase pure CIGS thin films at room temperature. Particularly, even at room temperature, distinct crystalline CIGS phase was observed in the films. Crystallinity of the films improved with increasing substrate temperature as evidenced by the decrease of FWHM from 0.65° to 0.54°. Slightly Cu-rich surface with Cu_2−xSe phase was confirmed to exist by Raman spectra, depending on substrate temperature. Improved electrical properties, i.e., carrier concentration of ∼10¹⁸ cm⁻³ and resistivity of 10⁻¹ Ω cm at higher substrate temperature for the optimal CIGS films are assumed to be induced by the potential contributions from highly crystallized thin films, existence of Cu_2−xSe phase and diffusion of Na from substrates to films.     

B2O3-free SiO2–Al2O3–SrO–La2O3–ZnO–TiO2 glass sealants for intermediate temperature solid oxide fuel cell applications

In this study, the chemical and thermal stabilities of eleven B₂O₃-free SiO₂–Al₂O₃–SrO–La₂O₃–ZnO–TiO₂ glasses were investigated, and the adhesion and sealing properties of the glasses with respect to Gd_0.2Ce_0.8O_2−δ (GDC) electrolyte and SUS 430 stainless steel (SUS430) were evaluated for use in intermediate temperature solid oxide fuel cells (ITSOFCs). It was found that the major crystallites formed in the glasses were initiated during the joining process at 950 °C, and only slight changes were observed in the intensity of crystallite peaks for the glasses subsequently soaked at 700 °C for 200 h. Experiments on the glass sandwiched with GDC electrolyte and SUS430 indicated that the SALSTi11 and SALSZT10 glasses provided good adhesion along the interfaces after heat treatment. According to the results of leakage test, the seals with the SALSTi11 and SALSZT10 glasses at 700 °C for a duration of 500 h showed good thermal stability with low leak rates of 0.007 and 0.003 sccm/cm at 0.5 psi, respectively. This property indicates a highly promising long-term thermal stability qualifying the sealing materials for ITSOFC applications.     

Investigation of the chalcogen interdiffusion in CuIn(TeSe)2 thin films

Graded thin films of CuInSe₂ on CuInTe₂ have been obtained by annealing of precursor structures containing Se and Te separated in depth. The depth profile of the phases in the film was investigated using X-ray diffraction with grazing incidence of the primary beam. Quasi-epitaxial growth of CuInSe₂ on a CuInTe₂ film next to the Mo back-electrode was observed after annealing at 450°C in vacuum. Annealing at higher temperature lead to chalcogen interdiffusion resulting in quaternary films. However, heat treatments of already reacted films did not result in any detectable interdiffusion. From these results the mechanisms governing the growth of films from precursors containing the chalcogens Se and Te separated in depth are discussed with respect to their application for thin film solar cells.     

Direct Z-scheme anatase/rutile bi-phase nanocomposite TiO2 nanofiber photocatalyst with enhanced photocatalytic H2-production activity

Design and preparation of direct Z-scheme anatase/rutile TiO₂ nanofiber photocatalyst to enhance photocatalytic H₂-production activity via water splitting is of great importance from both theoretical and practical viewpoints. Herein, we develop a facile method for preparing anatase and rutile bi-phase TiO₂ nanofibers with changing rutile content via a slow and rapid cooling of calcined electrospun TiO₂ nanofibers. The phase structure and composition, surface morphology, specific surface area, surface chemical composition and element chemical states of TiO₂ nanofibers were analyzed by X-ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), nitrogen adsorption and X-ray photoelectron spectroscopy (XPS). By a rapid cooling of 500 °C-calcined electrospun TiO₂ precursor, anatase/rutile bi-phase TiO₂ nanofibers with a roughly equal weight ratio of 55 wt.% anatase and 45 wt.% rutile were prepared. The enhanced H₂ production performance was observed in the above obtained anatase/rutile composite TiO₂ nanofibers. A Z-scheme photocatalytic mechanism is first proposed to explain the enhanced photocatalytic H₂-production activity of anatase/rutile bi-phase TiO₂ nanofibers, which is different from the traditional heterojunction electron–hole separation mechanism. This report highlights the importance of phase structure and composition on optimizing photocatalytic activity of TiO₂-based material.     

Effects of annealing on CuInSe2 films grown by molecular beam epitaxy

CuInSe₂ (CIS) thin films with a range of Cu/In ratios were grown by molecular beam epitaxy on GaAs (0 0 1) at substrate temperatures of T_s = 450–500°C and the effects of annealing under various atmospheres have been investigated. Photoluminescence spectra obtained from an ex-situ vacuum annealed CIS film at a temperature of T_A = 350°C showed a red-shift and a broadening of an emission peak (peak c) which originally appeared at 0.970 eV before annealing and the red-shifted peak c was found to consist of two overlapping peaks. The excitation power dependence of these overlapping peaks indicated the radiative recombination processes associated with the emissions to be a conduction band to acceptor transition (peak at 0.970 eV) and a transition due to donor-acceptor pairs (peak at 0.959 eV), indicating the formation of a shallow donor-type defect during the vacuum annealing process. The origin of this defect has tentatively been attributed to Se vacancies. On the other hand, the molar fraction of oxygen increased with increasing annealing temperature in dry-air. An epitaxially grown In₂O₃ phase was found both in Cu-rich and In-rich films annealed at T_A 350°C, which was not observed in the films annealed in Ar atmosphere. Thermodynamic calculations based on the Cu---In---Se---O---N system showed In₂O₃ to be the most stable phase in good agreement with the experimental results.