Convergence of optimal control problems governed by second kind parabolic variational inequalities

We consider a family of optimal control problems where the control variable is given by a boundary condition of Neumann type. This family is governed by parabolic variational inequalities of the second kind. We prove the strong convergence of the optimal control and state systems associated to this family to a similar optimal control problem. This work solves the open problem left by the authors in IFIP TC7 CSMO2011.     

Optimization method for solving bang-bang and singular control problems

In this paper we study optimal control problems with the control variable appearing linearly.A novel method for optimization with respect to the switching times of controls containing both bang-bang and singular arcs is presented.This method transforms the control problem into a finite-dimensional optimization problem by reformulating the control problem as a multi-stage optimization problem.The optimal control problem is partitioned as several stages, with each stage corresponding to a particular control arc.A control vector parameterization approach is applied to convert the control problem to a static nonlinear programming(NLP) problem.The control profiles and stage lengths act as decision variables.Based on the Pontryagin maximal principle,a multi-stage adjoint system is constructed to calculate the gradients required by the NLP solvers.Two examples are studied to demonstrate the effectiveness of this strategy.     

Linear quadratic regulation for discrete-time systems with state delays and multiplicative noise

In this paper, the linear quadratic regulation problem for discrete-time systems with state delays and multiplicative noise is considered. The necessary and sufficient condition for the problem admitting a unique solution is given. Under this condition, the optimal feedback control and the optimal cost are presented via a set of coupled difference equations. Our approach is based on the maximum principle. The key technique is to establish relations between the costate and the state.     

Developing a multi-objective,multi-item inventory model and three algorithms for its solution

We develop a multi-objective model in a multi-product inventory system.The proposed model is a joint replenishment problem(JRP) that has two objective functions.The first one is minimization of total ordering and inventory holding costs,which is the same objective function as the classic JRP.To increase the applicability of the proposed model,we suppose that transportation cost is independent of time,is not a part of holding cost,and is calculated based on the maximum of stored inventory,as is the case in many real inventory problems.Thus,the second objective function is minimization of total transportation cost.To solve this problem three efficient algorithms are proposed.First,the RAND algorithm,called the best heuristic algorithm for solving the JRP,is modified to be applicable for the proposed problem.A multi-objective genetic algorithm(MOGA) is developed as the second algorithm to solve the problem.Finally,the model is solved by a new algorithm that is a combination of the RAND algorithm and MOGA.The performances of these algorithms are then compared with those of the previous approaches and with each other,and the findings imply their ability in finding Pareto optimal solutions to 3200 randomly produced problems.     

A Stable Analytical Solution Method for Car-Like Robot Trajectory Tracking and Optimization

In this paper, the car-like robot kinematic model trajectory tracking and control problem is revisited by exploring an optimal analytical solution which guarantees the global exponential stability of the tracking error. The problem is formulated in the form of tracking error optimization in which the quadratic errors of the position, velocity, and acceleration are minimized subject to the rear-wheel car-like robot kinematic model. The input-output linearization technique is employed to transform the nonlinear problem into a linear formulation. By using the variational approach, the analytical solution is obtained, which is guaranteed to be globally exponentially stable and is also appropriate for real-time applications. The simulation results demonstrate the validity of the proposed mechanism in generating an optimal trajectory and control inputs by evaluating the proposed method in an eight-shape tracking scenario.     

Stability and boundedness in terms of two measures for nonlinear impulsive control systems

In this paper we study stability and boundedness in terms of two measures for impulsive control systems. By using variational Lyapunov method, a new variational comparison principle and some criteria on stability and boundedness are obtained. An example is presented to illustrate the efficiency of proposed result.     

Building an e-Portfolio with a learning plan centric approach

A portfolio records achievements in the personal growth process.A personal development e-Portfolio assists an individual in planning his/her development path and reflecting upon his/her own learning.In this article,we propose an approach to constructing a personal development portfolio.An abstract information model is presented to support such a portfolio.The information model is proposed based upon and according to IMS standards.The use of this approach is illustrated by way of a prototype e-Portfolio system.The usage scenario and limitations of such a portfolio are also discussed.     

Variational PCA fusion for resolution Pan-sharpening very high imagery

The Pan-sharpening approach based on principle component analysis （PCA） is affected by severe spectral distortion. To address this problem, a new pan-sharpening model based on PCA and variational technique is proposed to construct the substitute image of the first principal component （PC1）. The energy functional consists of three terms. The first term injects PC1 with the geometric structure of the panchromatic （Pan） image. The second term preserves the spectral pattern of the multi-spectral image in the merged result. And the third term guarantees the smoothness of the functional optimization solution. The fusion result is given by the minimum of the energy functional, which is computed with the gradient descend flow. The experiments on QuickBird and IKONOS datasets validate the effectiveness of the proposed model. Compared with the state- of-the-art pan-sharpening approaches, this model exhibits a better trade-off between improving spatial quality and preserving spectral signature of the MS image.     

Optimal source rate control for adapting VBR video over CBR channels

In this paper we discuss the source rate control problem of adapting variable bit-rate （VBR） compressed video over constant bit-rate （CBR） channels. Firstly we formulate it as an optimal control problem of a discrete linear system with state and control constraints. Then we apply the discrete maximum principle to get the optimal solution. Experimental results are given in the end. Compared with traditional algorithms, the proposed algorithm is suitable for the coder with continuous output rates, and can achieve the better solution. Our algorithm can be used in both off-line and on-line coding.     

Discrete-time inverse linear quadratic optimal control over finite time-horizon under noisy output measurements

In this paper, the problem of inverse quadratic optimal control over finite time-horizon for discrete-time linear systems is considered. Our goal is to recover the corresponding quadratic objective function using noisy observations. First, the identifiability of the model structure for the inverse optimal control problem is analyzed under relative degree assumption and we show the model structure is strictly globally identifiable. Next, we study the inverse optimal control problem whose initial state distribution and the observation noise distribution are unknown, yet the exact observations on the initial states are available. We formulate the problem as a risk minimization problem and approximate the problem using empirical average. It is further shown that the solution to the approximated problem is statistically consistent under the assumption of relative degrees. We then study the case where the exact observations on the initial states are not available, yet the observation noises are known to be white Gaussian distributed and the distribution of the initial state is also Gaussian (with unknown mean and covariance). EM-algorithm is used to estimate the parameters in the objective function. The effectiveness of our results are demonstrated by numerical examples.     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。