Microwave-hydrothermal synthesis of Y<Subscript>3</Subscript>Fe<Subscript>3.35</Subscript>Al<Subscript>1.65</Subscript>O<Subscript>12</Subscript> nanoparticles for magneto-hyperthermia application

Crystalline aluminum substituted yttrium iron garnet nanoparticles Y₃Fe_3.35Al_1.65O₁₂ (YIG) was synthesized by hydrothermal microwave synthesis at 140 °C with soaking times ranging from 15 to 60 min. X-ray diffraction confirmed the single-phase YIG nanoparticles excluding the presence of any other phases in the reaction products. The Raman spectra revealed that the largest soaking time provides greater energy crystallization causing changes of lattice vibration and a certain degree of disorder in the crystal lattice. Field emission gun-scanning electron microscopy and high resolution transmission electronic microscopic revealed a homogeneous size distribution of nanometric YIG powders with agglomerated particles. Magnetic measurements were achieved by using a vibrating-sample magnetometer unit. YIG nanoparticles have great potential in magneto-hyperthermia application once in vivo applications magnetic induction heating ferromagnetic compounds generate heat in AC magnetic fields.     

Efficient in situ growth of platinum nanoclusters on the surface of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> for the detection of latent fingermarks

Hydrophobic Fe₃O₄ nanoparticles were modified with polyethyleneimine (PEI) to obtain hydrophilic Fe₃O₄ nanoparticles. By reducing the content of H₂PtCl₆ solution by using l-ascorbic acid (AA) as a reductive agent, fluorescent platinum nanoclusters (Pt NCs) were incubated into the PEI-modified Fe₃O₄ nanoparticles. The prepared Fe₃O₄@Pt NCs microspheres possessed a uniform size, improved monodispersity, high magnetization (40.8 emu/g) and high fluorescence quantum yield (9.0%). Moreover, compared to the reported methods, this method demonstrated that the incubation of Pt NCs on the surface of PEI-Fe₃O₄ was more convenient and needed less reaction time (about 10 min). The experimental results showed that latent fingermarks developing with Fe₃O₄@Pt NCs powder exhibit excellent ridge details. The Fe₃O₄@Pt NCs with superparamagnetism and excellent fluorescence showed great potential in forensic science.     

Correlation between the physical properties and the novel applications of Mg<Subscript>0.7</Subscript>Cu<Subscript>0.3</Subscript>Fe<Subscript>2</Subscript>O<Subscript>4</Subscript> nano-ferrites

Nano-ferrite of the general formula Mg_0.7Cu_0.3Fe₂O₄ was prepared by citrate-gel auto combustion method. The structure was studied by X-ray diffraction, Brunauer–Emmet–Teller, field emission scanning electron microscopy and energy dispersive X-ray spectroscopy analyses. The crystallite size of the investigated nano ferrite was ?39 nm. The magnetic hysteresis measurements at different temperatures (100, 170, 240, and 300 K) were performed using a vibrating sample magnetometer. A correlation between magnetic behavior and lattice strain has been established. Arrott plot has been employed to understand the magnetic behavior of nano-crystalline Mg_0.7Cu_0.3Fe₂O₄. The magnetic susceptibility was carried out using Faraday’s method. Magnetic constants such as Curie temperature, effective magnetic moment, saturation magnetization, and coercivity were obtained and reported. Based on UV diffuse reflectance spectroscopy studies, the optical band gaps are in the range from (1.3–1.9 eV), hence the investigated samples could act as visible light driven photo catalysts.     

Preparation and characterization of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Ag composite magnetic nanoparticles

Fe₃O₄ magnetic nanoparticles being used as seeding materials, Ag⁺ ions on the Fe₃O₄ magnetic nanoparticles reduced to the metal form by tartaric acid using heated treatment. Thus, Fe₃O₄/Ag composite core-shell magnetic nanoparticles were synthesized. The products were characterized by transmission electron microscope (TEM) and x-ray diffraction (XRD). Both TEM and XRD results showed that the Ag nanoparticles were well distributed on the surface of Fe₃O₄ magnetic nanoparticles. The size for Fe₃O₄/Ag composite magnetic nanoparticles which were spherical shape was ≃40 nm. Furthermore, the magnetic properties of samples were characterized on a vibrating sample magnetometer. Under optimal conditions, Fe₃O₄/Ag composite nanoparticles showed higher magnetism than pure Fe₃O₄ nanoparticles. The text was submitted by the authors in English.     

Solvothermal synthesis and characterization of size-controlled monodisperse Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles

Monodisperse Fe₃O₄ nanoparticles with narrow size distribution could be successfully synthesized in large quantities by a facile solvothermal synthetic method in the presence of oleic acid and oleylamine. Well-defined assembly of uniform nanoparticles with average sizes of 8 nm can be obtained without a further size-selection process. The sizes of final products could be readily tuned from 5 to 12 nm by adjusting the experimental parameters such as reaction time, temperature, and surfactants. The phase structures, morphologies, and magnetic properties of the as-prepared products were investigated in detail by X-ray diffraction, transmission electron microscopy, selected area electron diffraction, high-resolution transmission electron microscopy, and magnetometry with a superconducting quantum interference device. The magnetic study reveals that the as-synthesized nanoparticles are ferromagnetic at 2 K while they are superparamagnetic at 300 K.     

Light weight RGO/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocomposite for efficient electromagnetic absorption coating in X-band

Reduced graphene oxide (RGO)/magnetite (Fe₃O₄) nanocomposite has been synthesized by an in-situ facile hydrothermal method. The XRD pattern reveals the development of nanocomposite in which both phases are coexistent. Raman Spectroscopy shows the main characteristics peaks of D and G bands at 1349 cm^?1 and 1595 cm^?1 for graphitic structures. The intensity ratio (I_D/I_G) is also calculated, which indicate the degree of defects in the material. This ratio (I_D/I_G), increases from 0.84 for GO to 0.91 for RGO/Fe₃O₄ nanocomposite and promotes the defects which are beneficial for electromagnetic (EM) absorption. The SEM image depicts that, Fe₃O₄ spherical nanoparticles are dispersed over the surface of graphene sheets and provide a thermal conducting path for heat dissipation between different layers of graphene. The EM absorption properties have been analyzed at 2–18 GHz of RGO and RGO/Fe₃O₄. The addition of proper content of Fe₃O₄ magnetic nanoparticles in RGO sheets improved the Reflection Loss (RL) from ??13.5 dB to ??20 dB at a frequency of 9.5 GHz. Moreover, due to magnetic loss and interfacial polarization, the effective bandwidth increases from 2.5 GHz to 3.8 GHz at a coating thickness of 1.5 mm. Hence this light weight nanocomposite is an excellent material for strong EM absorption in X-band.     

Synthesis and microwave absorption property of ternary composites: polyaniline/CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/Ba<Subscript>3</Subscript>Co<Subscript>2</Subscript>Fe<Subscript>24</Subscript>O<Subscript>41</Subscript>

Polyaniline (PANI)/CoFe₂O₄/Ba₃Co₂Fe₂₄O₄₁ composite was prepared by an in-situ polymerization method. The phase structure, morphology and magnetic properties of the as-prepared PANI/CoFe₂O₄/Ba₃Co₂Fe₂₄O₄₁ composite were characterized by XRD, FT-IR, SEM, TEM, and VSM, respectively. The microwave absorption properties of the composite were investigated by using a vector network analyzer in the 2–18 GHz frequency range. The results show that the maximum reflection loss value of the PANI/CoFe₂O₄/Ba₃Co₂Fe₂₄O₄₁ composite reaches ?30.5 dB at 10.5 GHz with a thickness of 3 mm and the bandwidth of reflection loss below ?10 dB reaches up to 1.2 GHz. The excellent microwave absorption properties of the as-prepared PANI/CoFe₂O₄/Ba₃Co₂Fe₂₄O₄₁ composite due to the enhanced impedance match between dielectric loss and magnetic loss.     

Fast microwave synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Ag magnetic nanoparticles using Fe<Superscript>2+</Superscript> as precursor

A simple and quick microwave method to prepare high performance magnetite nanoparticles (Fe₃O₄ NPs) directly from Fe has been developed. The as-prepared Fe₃O₄ NPs product was fully characterized by X-ray diffraction, transmission electron microscopy and scanning electron microscopy. The results show that the as-prepared Fe₃O₄ NPs are quite monodisperse with an average core size of 80 × 5 nm. The microwave synthesis technique can be easily modified to prepare Fe₃O₄/Ag NPs and these NPs possess good magnetic properties. The formation mechanisms of the NPs are also discussed. Our proposed synthesis procedure is quick and simple, and shows potential for large-scale production and applications for catalysis and biomedical/biological uses.     

Stability of the Fe<Subscript>12</Subscript>O<Subscript>12</Subscript> cluster

Superexchange effects play an important role in the determination of crystal structures; however, there has been much less reported on how they determine the stability of clusters. Using evolutionary search strategies and DFT+U (density functional theory with the Hubbard U correction) calculations, we investigate the global minimum-energy structures of Fe₁₂O_n clusters. Among predicted Fe₁₂O_n clusters, a cage-shaped Fe₁₂O₁₂ cluster with unexpected stability was observed. In addition, the bare Fe₁₂O₁₂ cluster is shown to possess an extremely large energy gap (2.00 eV), which is greater than that of C₆₀, Au₂₀ and Al₁₃?clusters. Using a Heisenberg model, we traced the origin of the unexpected stability of the bare Fe₁₂O₁₂ cluster to magnetic competition between the nearest-neighbor exchange constant J₁ and the next-nearest neighbor exchange constant J₂ that was induced by the superexchange interactions. The bare Fe₁₂O₁₂ cluster is thus a unique molecule that is stable and chemically inert.

Open image in new window

     

Plasma-chemical Synthesis of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> Nanoparticles for Doping of High-Temperature Superconductors

Ferrite nanoparticles (Fe₃O₄) have been produced by the direct low-pressure plasma-chemical synthesis. X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), vibration magnetometry (VSM), and Mössbauer spectroscopy (NGR) were used for measurements, showing that the produced nanoparticles have an average size of 9.4 nm, a crystalline phase of magnetite, possess a property of superparamagnetism at room temperature, and have a blocking temperature of 89 K. The peculiarities of nanoparticle behavior in the magnetic field, related to a large specific surface area, are discussed.     

Study on the endocytosis and the internalization mechanism of aminosilane-coated Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles in vitro

In this study, the endocytosis and the internalization mechanism of aminosilane-coated Fe₃O₄ nanoparticles into human lung cancer cell line SPC-A1 was studied compared with human lung cell line WI-38 in vitro. The particle endocytosis behavior was studied by using Transmission Electron Microscope (TEM) and Coupled Plasma-Atomic Emission Spectrometry (ICP-AES). It was found that aminosilane-coated Fe₃O₄ nanoparticles could be greatly taken up by SPC-A1 human cancer cells (202 pg iron/cell) but not by WI-38 human lung cells (13 pg iron/cell). The particles could be retained in SPC-A1 cells over a number of generations in vitro. Different endocytosis was observed by TEM after SPC-A1 cells were treated with different temperature or with/without Cytochalasin B (Inhibitor of phagocytosis) at 37 °C. No nanoparticles were taken up by SPC-A1 after the endocytosis inhibited in low temperature. Restoring the endocytosis activity at 37 °C, the process of nanoparticles from coated pit to endosomes and lysosomes was observed by TEM. Endocytosis activity was effectively inhibited by the presence of Cytochalasin B at 37 °C, while a lot of nanoparticles were uptaken to the cytoplasm of SPC-A1 cells in the control group. Our results suggest that the process of endocytosis of aminosilane-coated Fe₃O₄ nanoparticles can efficiently takes place in lung cancer cells and nanoparticles can be kept in cancer cells for generations. Phagocytosis may be involved in the internalization process of aminosilane-coated Fe₃O₄ nanoparticles.     

Preparation of magnetic composites through SrO-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> glass crystallization

Glasses with nominal compositions 11SrO · 5.5Fe₂O₃ · 4.5Al₂O₃ · 4B₂O₃ (1) and 15SrO · 5.5Fe₂O₃ · 4.5Al₂O₃ · 4B₂O₃ (2) were prepared by rapidly quenching oxide melts between counterrotating steel rollers. The glasses were then heat-treated in the range 650–950°C to produce glass-ceramic samples. The samples were characterized by X-ray diffraction, electron microscopy, and magnetic measurements. The phase composition of the glass-ceramics was determined, and their microstructure and magnetic properties were studied. The annealing temperature was shown to have a strong effect on the coercivity of the materials, which reaches 650 and 570 kA/m for compositions 1 and 2, respectively.     

Fabrication and microwave absorption performances of hollow-structure Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/PANI microspheres

The hollow polyaniline (PANI) microspheres were prepared by controlling the mass ratio of the aniline to polystyrene (PS) via a template method, and Fe₃O₄/PANI composite microspheres have been fabricated by blending the hollow PANI microspheres with Fe₃O₄ magnetic particles. The effects of the mass ratio of aniline/PS on the microwave absorption performances of Fe₃O₄/PANI microspheres were investigated. It was found that the value of minimum reflection loss (RL_min) of the microspheres were respectively ?14.06, ?22.34 and ?24.3 dB, corresponding to the mass ratio of aniline/PS of 1:1.5, 1:3, and 1:6. In addition, when the mass ratio of aniline/PS was 1:6, with the thickness of 1.5 and 2.0 mm, the bandwidth below ?10dB were respectively 2.48 GHz (15.52–18 GHz) and 4.64 GHz (11.04–15.68 GHz), indicating that the Fe₃O₄/PANI microspheres could be a potential electromagnetic wave absorbing material in X (8–12 GHz) and Ku (12–18 GHz) bands.     

Synthesis and application of TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript>/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles as novel adsorbent for removal of Cd(II), Hg(II) and Ni(II) ions from water samples

In the current study, SiO₂/Fe₃O₄ core–shell nanoparticles functionalized with TiO₂, using a simple method and application for removal of Cd(II), Hg(II) and Ni(II) ions from aqueous solution. The structure of the resulting product was confirmed by X-ray diffraction spectrometry, transmission electron microscopy (TEM), pH_pzc and Brunauer, Emmett and Teller methods. The average diameter of TiO₂/SiO₂/Fe₃O₄ nanoparticles according to TEM was obtained around 48 nm. In batch tests, the effects of pH, initial metal concentration, contact time and temperature were studied. Adsorption of metal ions was studied from both kinetics and equilibrium point of view. Maximum adsorption capacity of Cd(II), Hg(II) and Ni(II) on TiO₂/SiO₂/Fe₃O₄ nanoparticles was 670.9, 745.6 and 563.0 mg g^?1, respectively. Adsorption–desorption results showed that the reusability of nanoparticles was encouraging. This adsorbent was successfully applied to removal Cd(II), Hg(II) and Ni(II) ions in real samples including tap water, electronic wastewater and medical wastewater.     

Visible photocatalytic degradation of methylene blue on magnetic semiconducting La<Subscript>0.2</Subscript>Sr<Subscript>0.7</Subscript>Fe<Subscript>12</Subscript>O<Subscript>19</Subscript>

Methylene blue (MB) is a representative of a class of dyestuffs resistant to biodegradation. This paper presents a novel photocatalytic degradation of MB by La_0.2Sr_0.7Fe₁₂O₁₉ compound, which is a traditional permanent magnet and displays a large magnetic hysteresis (M–H) loop. The remnant magnetic moment and coercive field are determined to be 52 emu/g and 5876 Oe, respectively. UV–Visible optical spectroscopy reveals that La_0.2Sr_0.7Fe₁₂O₁₉ is simultaneously a semiconductor, whose direct and indirect band gap energies are determined to be 1.47 and 0.88 eV, respectively. The near infrared band gap makes it a good candidate to harvest sunlight for photocatalytic reaction or solar cell devices. This magnetic compound demonstrates excellent photocatalytic activity on degradation of MB under visible illumination. The colour of MB dispersion solution changes from deep blue to pale white and the absorbance decreases rapidly from 1.8 down to zero when the illumination duration extends to 6 h. Five absorption bands did not make any blue shifts along with the reaction time, suggesting a one-stepwise degradation process of MB, which makes La_0.2Sr_0.7Fe₁₂O₁₉ a unique magnetic catalyst and differs from TiO₂ and other conventional catalysts.     

Magnetic properties of Nd-Y<Subscript>3</Subscript>Fe<Subscript>5</Subscript>O<Subscript>12</Subscript> nanoparticles

Nb³⁺-substituted garnet nanoparticles Y_3−xNd_xFe₅O₁₂ (x = 0.0, 0.5, 1.0, 1.5, and 2.0) were fabricated by a sol-gel method and their crystalline structures and magnetic properties were investigated by using X-ray diffraction (XRD), thermal analysis (DTA/TG), and vibrating sample magnetometer (VSM). The XRD patterns of Y_3−xNd_xFe₅O₁₂ have only peaks of the garnet structure and the sizes of particles range from 34 to 70 nm. From the results of VSM, it is shown that when the Nd concentration x ( 1.0, the saturation magnetization of Y_3−xNd_xFe₅O₁₂ increases as the Nd concentration (x) is increased, and gets its maximum at x = 1.0, but when x ( 1.0, the saturation magnetization decreases with increasing the Nd concentration (x), this may be due to the distortion of the microstructure of Y_3−xNd_xFe₅O₁₂, which leads to the decrease of the effective moment formed by Fe³⁺. Meanwhile, it is observed that with the enhancement of the surface spin effects, the saturation magnetization rises as the particle size is increased.     

Structural studies of a new electroceramic composite: Pb(Fe<Subscript>0.5</Subscript>Nb<Subscript>0.5</Subscript>)O<Subscript>3</Subscript> (PFN)-Cr<Subscript>0.75</Subscript>Fe<Subscript>1.25</Subscript>O<Subscript>3</Subscript>(CRFO)

A study of the structural characteristics of the composites [Pb(Fe_0.5Nb_0.5)O₃(PFN)] _x -[Cr_0.75Fe_1.25O₃(CRFO)]_100?x (x = 0 (CRFO100), 10, 50, 90, 100) was performed in this work. The compounds PFN100 and CRFO100 were prepared by conventional solid-state method and investigated by X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), and ⁵⁷Fe Mössbauer Spectroscopy techniques. The X-ray analysis shows that PFN100 is tetragonal and the CRFO100 phase has a trigonal symmetry. The refinement of all the composites was also performed and discussed in this paper. The Mössbauer spectrum for the composite samples shows a paramagnetic doublet and a sextet probably assigned to a magnetic phase associated to Fe⁺³. For the sample PFN100, only a magnetic field of 49.5 T (isomer shift (δ) = 0.21 mm/s) was detected. For the composite sample, the δ and Δ are typical of Fe ions at sites of octahedral coordination.     

Dual-mode protein detection based on Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>-Au hybrid nanoparticles

A facile method of synthesizing Fe₃O₄-Au hybrid nanoparticles is reported utilizing the multifunctional nature of polyethyleneimine (PEI). An abundance of 5 nm gold nanoparticles were attached to 50 nm Fe₃O₄ nanoparticles via the covalent binding between the -NH₂ groups of the PEI and Au nanoparticles, as well as the electrostatic interaction between the negatively charged citrate-coated Au nanoparticles and the positively charged PEI-coated Fe₃O₄ nanoparticles. The as-prepared Fe₃O₄-Au hybrid nanoparticles, which combine the merits of magnetic materials and gold, were successfully employed for the first time in the dual-mode detection of carcinoembryonic antigen (CEA) via electrochemical and surface-enhanced Raman scattering (SERS) methods. Both methods make clever use of Fe₃O₄-Au nanoparticles and can accurately verify the presence of antigens. In particular, the electrochemical immunosensor detection displays a wide linear range (0.01–10 ng/mL) of response with a low detection limit (10 pg/mL), while the SERS method responds to even lower antigen concentrations with a wider detection range. The Fe₃O₄-Au hybrid nanoparticles therefore exhibit great potential for biomedical applications.      

Enhancement of the optical and mechanical properties of chitosan using Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles

In this work, the optical and mechanical properties of Fe₂O₃ nanoparticles (NPs)/chitosan nanocomposite films have been investigated. Nanocomposite films of different weight ratios of Fe₂O₃ NPs/chitosan (0, 1, 5, 10, 20 and 30 wt%) were fabricated using casting technique. The optical properties of colloidal Fe₂O₃ NPs and Fe₂O₃ NPs/chitosan nanocomposite films were recorded using UV–visible spectrophotometer. As the ratio of Fe₂O₃ NPs to chitosan increases from 0 to 30%, the energy band gap of Fe₂O₃ NPs/chitosan films decreases from 3.16 to 2.11 eV. This decrease is due to quantum confinement effect. The mechanical properties of the nanocomposite films as a function of sweeping temperature were measured using a dynamic mechanical analyzer. An enhancement in storage modulus, stiffness and glass transition temperature (T_g) has been observed as the ratio of Fe₂O₃ NPs/chitosan increases. T_g of Fe₂O₃ NPs/chitosan nanocomposite film shifts towards higher temperature side with respect to pure chitosan film from 152.1 to 166.3?°C as the ratio of Fe₂O₃ NPs/chitosan increases from 0 to 30 wt%. The increase in T_g is mainly attributed to the decrease in free volumes and vacancies in the nanocomposite films as the weight ratio of Fe₂O₃ NPs/chitosan increases.     

Facile synthesis of SrFe<Subscript>12</Subscript>O<Subscript>19</Subscript> nanoparticles and its photocatalyst application

The strontium hexaferrite (SrFe₁₂O₁₉) nanoparticles have been successfully synthesized by co-precipitation route. The effect of various parameters such as calcination temperature and chelating agents were screened to achieve optimum condition. Different chelating agents such as amino acids (proline, alanine, aspartic acid) and surfactants (SDBS, PVP, and EDTA) were used. Compared with the amino acids, the surfactants increase the particle size and the best result was observed for alanine. The SrFe₁₂O₁₉ nanoparticles showed enhanced photocatalytic activity in the degradation of methyl orange under visible light irradiation (λ?>?400 nm). The degradation rates of the methyl orange were measured to be as high as 95% in 220 min. The nanoparticles were also characterized by several techniques including FT-IR, XRD, SEM, and VSM. The VSM measurement showed a saturation magnetization value (Ms) of 32 emu/g. The SEM images proposed that the particles are almost spherical with an average particle size of 90 nm.