Light weight RGO/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocomposite for efficient electromagnetic absorption coating in X-band

Reduced graphene oxide (RGO)/magnetite (Fe₃O₄) nanocomposite has been synthesized by an in-situ facile hydrothermal method. The XRD pattern reveals the development of nanocomposite in which both phases are coexistent. Raman Spectroscopy shows the main characteristics peaks of D and G bands at 1349 cm^?1 and 1595 cm^?1 for graphitic structures. The intensity ratio (I_D/I_G) is also calculated, which indicate the degree of defects in the material. This ratio (I_D/I_G), increases from 0.84 for GO to 0.91 for RGO/Fe₃O₄ nanocomposite and promotes the defects which are beneficial for electromagnetic (EM) absorption. The SEM image depicts that, Fe₃O₄ spherical nanoparticles are dispersed over the surface of graphene sheets and provide a thermal conducting path for heat dissipation between different layers of graphene. The EM absorption properties have been analyzed at 2–18 GHz of RGO and RGO/Fe₃O₄. The addition of proper content of Fe₃O₄ magnetic nanoparticles in RGO sheets improved the Reflection Loss (RL) from ??13.5 dB to ??20 dB at a frequency of 9.5 GHz. Moreover, due to magnetic loss and interfacial polarization, the effective bandwidth increases from 2.5 GHz to 3.8 GHz at a coating thickness of 1.5 mm. Hence this light weight nanocomposite is an excellent material for strong EM absorption in X-band.     

Synthesis of magnetic Cu/CuFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanocomposite as a highly efficient Fenton-like catalyst for methylene blue degradation

A magnetic Cu/CuFe₂O₄ nanocomposite was synthesized by a facile one-pot solvothermal method and characterized as an excellent Fenton-like catalyst for methylene blue (MB) degradation. The content of zero-valent copper (Cu⁰) in Cu/CuFe₂O₄ composite could be simply controlled by changing the dosage of sodium acetate in the synthetic process, and the Fenton-like catalytic performance of Cu/CuFe₂O₄ composite enhanced with increasing the Cu⁰ content. In the presence of H₂O₂ (15 mM), the as-synthesized 3-Cu/CuFe₂O₄ nanocomposite could remove 99% of MB (50 mg/L) after only 4 min at pH 2.50, greatly higher than that of pure CuFe₂O₄ and Cu⁰ under the same condition. The enhancement activity of Cu/CuFe₂O₄ nanocomposite was due to the synergistic effect between Cu⁰ and CuFe₂O₄. The radical capture experiments and coumarin fluorescent probe technique confirmed that MB was degraded mainly by the attack of OH^· radicals in Cu/CuFe₂O₄–H₂O₂ system.     

High-performance flexible supercapacitors based on C/Na<Subscript>2</Subscript>Ti<Subscript>5</Subscript>O<Subscript>11</Subscript> nanocomposite electrode materials

A new solution method to synthesize Na₂Ti₅O₁₁ with titanium powder is presented, and the C/Na₂Ti₅O₁₁ nanocomposite with high specific surface area and tunnel structure as the electrode material has excellent electrochemical performance. The single electrode composed of the C/Na₂Ti₅O₁₁ nanocomposite based on carbon fiber fabric (CFF) has the highest area capacitance of 1066 mF cm^?2 at a current density of 2 mA cm^?2, which is superior to other titanates and Na-ion materials for supercapacitors (SCs). By scan-rate dependence cyclic voltammetry analysis, the capacity value shows both capacitive and faradaic intercalation processes, and the intercalation process contributed 81.7% of the total charge storage at the scan rate of 5 mV s^?1. The flexible symmetric solid-state SCs (C/Na₂Ti₅O₁₁/CFF//C/Na₂Ti₅O₁₁/CFF) based on different C/Na₂Ti₅O₁₁ mass were fabricated, and 7 mg SCs show the best supercapacitive characteristics with an area capacitance of 309 mF cm^?2 and a specific capacitance of 441 F g^?1, it has a maximum energy density of 22 Wh kg^?1 and power density of 1286 W kg^?1. As for practical application, three SCs in series can power 100 green light-emitting diodes (LEDs) to light up for 18 min, which is much longer than our previous work by Wang et al. lighting 100 LEDs for 8 min. Thus, the C/Na₂Ti₅O₁₁ nanocomposite has promising potential application in energy storage devices.     

Facile synthesis of graphene@NiMoO<Subscript>4</Subscript> nanosheet arrays on Ni foam for a high-performance asymmetric supercapacitor

Honeycomb-like NiMoO₄ with nanosheet arrays is grown on reduced graphene oxide, which is supported on Ni foam having successfully fabricated by a simple hydrothermal treatment followed by a calcined process. In the as-synthesized Ni foam@reduced graphene oxide@NiMoO₄, Ni foam served as “skeleton” to support reduced graphene oxide and reduced graphene oxide directly grown on Ni foam served as the “skin” to provide high passway of electrons and ions, which simultaneously accommodated the volume change during the process of charge–discharge and NiMoO₄ acted as active substance to provide high areal capacitance. It shows a high areal capacitance of 2165.9 mF cm^?2 at a current density of 1 mA cm^?2 and long cycle stability with 93.8% capacitance retained over 1000 charge–discharge cycles. Moreover, an asymmetric supercapacitor has been constructed by using Ni foam@reduced graphene oxide and Ni foam@reduced graphene oxide@NiMoO₄ as negative and positive electrodes. The energy density of this asymmetric supercapacitor is 0.579 mWh cm^?2, and it retains 93.1% capacitance over charge–discharge 5000 cycles. Therefore, it reveals great promise for practical applications in energy storage devices.     

Facile synthesis and excellent electromagnetic wave absorption properties of flower-like porous RGO/PANI/Cu<Subscript>2</Subscript>O nanocomposites

Novel porous ternary nanocomposite systems containing reduced graphene oxide (RGO)/polyaniline (PANI)/cuprous oxide (Cu₂O) were prepared via one-step in situ redox method. The RGO/PANI/Cu₂O nanocomposites present a flower-like structure with an average size of 2.0 μm in diameter. The morphologies and properties of the products can be controlled by adjusting the molar ratios of aniline to Cu²⁺. When the molar ratio of aniline to Cu²⁺ is 1:1, the product exhibits excellent microwave absorption property in the frequency range of 2–18 GHz. It can be seen that the maximum reflection loss (RL) of the ternary composite is up to ?52.8 dB at 2.7 GHz with a thickness of only 2 mm, and the absorption bandwidth corresponding to ?10 dB (90% of EM wave absorption) is 13.2 GHz. The microwave absorption property of ternary RGO/PANI/Cu₂O composite is significantly improved due to its special flower-like porous structure, dielectric loss property and well impedance matching characteristics, which is 8.12 times than that of pure RGO and 5.28 times than that of pure PANI. Therefore, our study paves a new way to prepare the promising lightweight and high-performance composite materials combined with the characteristics of three components for electromagnetic absorption.     

Synthesis and investigation of SnS<Subscript>2</Subscript>/RGO nanocomposites with different GO concentrations: structure and optical properties,photocatalytic performance

In this study, we report the synthesis of tin disulfide/reduced graphrene oxide (SnS₂/RGO) nanocomposites by a simple one-step hydrothermal method. In order to investigate the effect of RGO on the structure and optical properties and photocatalytic activity of the products a series of nanocomposites was prepared with different concentrations of GO. The samples were examined using X-ray diffraction, field emission scanning electron microscopy (FESEM), Raman spectroscopy, UV–Vis spectroscopy and photoluminescence techniques. The results confirmed the growth of SnS₂ with the hexagonal phase. FESEM analysis showed that the hexagonal tin disulfide nanoplates are uniformly dispersed on the surface of the graphene oxide sheets. The optical examination of SnS₂ and SnS₂/RGO nanocomposites indicated that the band gaps of all nanocomposites are greater than that of SnS₂ due to the quantum confinement effect. The photocatalytic activity of the SnS₂/RGO nanocomposites was investigated for degradation of the acid orange 7 dye under visible light. It was observed that all nanocomposites have a higher photocatalytic activity for the degradation in comparison with pure SnS₂. The optimum concentration of GO in SnS₂/RGO nanocomposite for achieving the highest photocatalytic efficiency (81%) was determined as 2 mg ml^?1 during 180 min.     

Cathodic electrosynthesis of CuFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/CuO composite nanostructures for high performance supercapacitor applications

In this work, CuFe₂O₄/CuO nanocomposites have been synthesized by galvanostatic cathodic electrodeposition. The obtained nanocomposites were characterized by field emission scanning electron microscopy, transmission electron microscopy, X-ray powder diffraction, Fourier Transform Infrared, and Brunauer–Emmett–Teller surface area analysis. The electrochemical properties of CuFe₂O₄/CuO nanocomposites were evaluated by cyclic voltammetry, galvanostatic charge–discharge cycling, and electrochemical impedance spectroscopy in 1.0 M KOH. The CuFe₂O₄/CuO nanocomposites have shown the high specific capacitance of 322.49 F g^?1 at the scan rate of 1 mV s^?1. After 5000 cycles, 92% of this specific capacitance was retained. Although the prepared nanocomposite has shown a mediocre specific capacitance compared to other metal oxide-based materials, the low cost of the starting materials and the ease of preparation make this nanocomposite a good candidate for supercapacitor applications.     

3D composites of ZnSnO<Subscript>3</Subscript> nanoplates/reduced graphene oxide aerogels as an advanced lithium-ion battery anode

Zinc-based bimetal oxides have received considerable attention as anode for lithium-ion batteries (LIBs). A one-pot self-assembly hydrothermal method is developed for the fabrication of 3D hierarchical structure aerogels from zinc stannate (ZnSnO₃) and reduced graphene oxide (rGO). 3D interconnected porous structure with ZnSnO₃ hexagon nanoplates uniformly dispersed on graphene sheets has been constructed successfully, in which the crystalline hexagon nanoplates ZnSnO₃ are firstly used to prepare ZnSnO₃-based anode materials for LIBs. The as-prepared ZnSnO₃ nanoplates/reduced graphene oxide aerogels (ZnSnO₃–rGAs) electrode demonstrates an excellent reversible capacity (780 mAh g^?1) after 200 cycles at a certain current density (100 mA g^?1) and still delivers a specific capacity of 460 mAh g^?1 even at 1000 mA g^?1. The superior performance of lithium storage is attributed to the 3D porous hierarchical structure and the synergistic effects of uniform hexagon nanoplates ZnSnO₃ and rGO sheets.     

A facile one step synthesis of SnO<Subscript>2</Subscript>/CuO and CuO/SnO<Subscript>2</Subscript> nanocomposites: photocatalytic application

Here novel photocatalysts, SnO₂/CuO and CuO/SnO₂ nanocomposites were successfully synthesized by chemical method at room temperature. X-ray Diffraction (XRD), transmission electron microscopy (TEM), Fourier transform Infrared (FT-IR), UV–Visible (UV–Vis) and photoluminescence (PL) spectroscopy were utilized for characterization of the nanocomposites. The photocatalytic activity of the nanocomposites was investigated. The hybrid nanocomposites exhibited high photocatalytic activity as evident from the degradation of methylene blue (MB) dye. The result revealed substantial degradation of the MB dye (92 and 69.5% degradation of SnO₂/CuO and CuO/SnO₂, respectively) under visible light illumination with short period of 30 min. Their large conduction band potential difference and the inner electrostatic field formed in the p–n heterojunction provide a strong driving force for the photogenerated electrons to move from Cu₂O to SnO₂ under visible light illumination. The excellent photodegradation of methylene blue suggested that the heterostructured SnO₂/CuO nanocomposite possessed higher charge separation and photodegradation abilities than CuO/SnO₂ nanocomposite under visible light irradiation.     

Vanadium doped SnO<Subscript>2</Subscript> nanoparticles for photocatalytic degradation of methylene blue

Nanometric V-doped particles with vanadium concentration varying from 0 to 10% were prepared using the polyol method. The influence of the doping on the textural, structural and optical properties was studied by various methods of characterization. X-ray diffraction (XRD) patterns disclose that nanocrystallites of cassiterite, i.e. rutile-like tetragonal structure SnO₂ and the absence of a new vanadium phase in the XRD pattern in the different concentration of doping were formed after annealing, the ordinary crystallite size decreased from 20.6 to 12.3 when the doping concentration increased from 0 to 10%, respectively. Moreover, the N₂ sorption porosimetry and transmission electron microscopic show that all samples synthesized were constituted of an aggregated network of almost spherical nanoparticles, which sizes changed with the altitude in the doping concentration to 10%. In accordance with UV–visible absorption measurements, this diminution of nanoparticles sizes was followed by a decrease in the band gap value from 3.25 eV, for undoped SnO₂, to 2.75 eV, for SnO₂ doped at 10%. On the other part, the photocatalytic activity of undoped and V-doped SnO₂ nanoparticles was studied using methylene blue (MB) as model organic pollutants. The SnO₂ nanoparticles doped at 10% of vanadium disclosed that the discoloration of MB reached 97.4% after irradiation of 120 min, with an apparent constant rate of the degradation reaching 0.035 min^?1 for MB degradation that was about 2.5 times more than that of pure SnO₂ (0.014 min^?1).     

Effects of sodium oleate on synthesis and photocatalytic activity of Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript>/Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>@RGO

In this study, the effects of sodium oleate on synthesis of Bi₂WO₆/Bi₂O₃ loaded reduced graphene oxide photocatalyst was studied. The as-prepared composites were characterized by X-ray diffraction, Fourier transform infrared, X-ray photoelectron spectroscopy, UV–visible diffuse reflectance and photoluminescence spectroscopy. The results suggested that addition of sodium oleate not only promoted synthesis of Bi₂O₃, but also enhanced the reduction of GO to graphene. When the amount of sodium oleate was 4 mol (Bi:SO?=?1:1), Bi₂WO₆/Bi₂O₃@RGO to the best visible-light photocatalytic activity can be synthesized by a facile one-step solvothermal process without further reduction reaction. Hence, it indicated that sodium oleate could affect the synthesis of the as-prepared composites and the photocatalytic activity for degradation of RhB. This study did provide not only a facile method to synthesize Bi₂WO₆/Bi₂O₃@RGO, but also a method to reduce graphene oxide to graphene.     

Preparation of a Cu<Subscript>2</Subscript>O/rGO porous composite through a double-sacrificial-template method for non-enzymatic glucose detection

We report a double-sacrificial-template method for the fabrication of a Cu₂O and a reduced graphene oxide (rGO) porous nanocomposite (Cu₂O/rGO), which has great potential in non-enzymatic glucose detection. Firstly, an aqueous graphene oxide (GO) solution was dispersed in a polystyrene (PS)/cyclohexane (CH) solution to prepare a water-in-oil emulsion at 50 °C. Then, the emulsion was cast onto a glass substrate to evaporate solvents and cooled down to room temperature. During that time, the self-assembly of the GO sheets and the PS chains takes place at the interface. The cooling of the emulsion below the θ temperature of the system PS/CH (34.5 °C) facilitates the precipitation of the PS chains at the interface to form microcapsules. A sponge-like PS/GO composite film was thus obtained after complete evaporation of solvents, where the water droplets in the emulsion served as the first sacrificial template. The PS/GO composite was loaded with copper compounds and was then carbonized to remove the second template of the polymer. In this manner, a free-standing porous nanocomposite of Cu₂O/rGO was fabricated, and its structure was carefully characterized. The composite was applied as the working electrode in order to take advantages of its porous microstructure, the conductivity of rGO, and the electrochemical performance of crystalline nano-Cu₂O. The electrochemical responses of the composite to glucose were evaluated at glucose concentration ranging from 20 to 1000 μM. The results evidence that the porous nanocomposite of Cu₂O/rGO exhibits fast and linear amperometric responses to glucose with excellent sensitivities. Moreover, the stability of the Cu₂O/rGO composite in the electrolyte solution and its selective response to glucose have been demonstrated to indicate its practical potential.     

TiO<Subscript>2</Subscript>/reduced graphene oxide composite based nano-petals for supercapacitor application: effect of substrate

In the present study, graphene oxide is synthesized using modified Hummers method. The X-ray diffraction spectroscopy (XRD), Fourier transform Raman spectroscopy (FT-Raman), energy-dispersive spectroscopy (EDS) and scanning electron microscopic (SEM) study is used to understand the successful synthesis of graphene oxide using the modified Hummers method. Secondly, the TiO₂/RGO composite has developed using co-precipitation method and structural, morphological, electrochemical and supercapacitive properties are studied. The TiO₂/RGO nano-composite shows the porous nanopetals like nature. The thin films of TiO₂/RGO composite are developed using the doctor blade method on steel, and the copper substrate and the electrochemical and supercapacitive properties are studied. The TiO₂/RGO composite thin films deposited on steel substrate are showing relatively less charge transfer resistance, and better specific capacitance than thin film deposited copper substrate. The TiO₂/RGO thin films deposited on steel substrate shows maximum specific capacitance 192 Fg^?1 at a scan rate of 5 mVs^?1.     

Reduced graphene oxide/Cu<Subscript>2</Subscript>O nanostructure composite films as an effective and stable hydrogen evolution photocathode for water splitting

An efficient photocathode consisting of reduced graphene oxide/Cu₂O/Cu (rGO/Cu₂O/Cu) has been successfully prepared in this work via a facile two step method, consisting of chemical oxidation of a copper foil in alkaline solution using (NH₄)₂S₂O₈ as the oxidizing agent, dipping the prepared samples in graphene oxide (GO) solution and calcination at vacuum to form a rGO layer onto Cu₂O/Cu photocathode, which acts as a protective layer. The products were composed of a thin Cu₂O layer topped with a thin rGO film as the protective coating. The chemical composition and rGO amount in the composite materials were easily controlled by changing the immersion time to enhance PEC performance. UV–Vis spectroscopy, Raman spectroscopy, XRD, SEM, TEM and FTIR spectroscopy were used in the optical and morphological characterization of the graphene oxide and prepared photocathodes. Distinct patches of GO film are formed on the Cu(OH)₂ nanostructure surface, as shown by SEM results. Linear sweep voltammetry and chronoamperometry analysis have been applied in the photoelectrochemical characterizations in the dark and under illumination conditions. Photocurrent density provided by rGO/Cu₂O/Cu photocathode ??2.54 mA cm^??2 is three times greater than that of bare Cu₂O/Cu photocathode ??0.82 mA cm^??2 at 0 V vs. RHE under illumination. Low photostability of 42% is exhibited by bare Cu₂O/Cu photocathode after 200 s irradiation whereas rGO/Cu₂O/Cu photocathode shows approximately 98% of the initial photocurrent density. Therefore, a strategy has been developed in this work for the synthesis of this new photocathode using Cu₂O/Cu as an effective photocathode for photoelectrochemical (PEC) water splitting.     

Photoelectrochemical properties of lead-free ferroelectric ceramic Ba(Ti<Subscript>0.96</Subscript>Mg<Subscript>0.013</Subscript>Nb<Subscript>0.026</Subscript>)O<Subscript>3</Subscript>: application to solar conversion of eosin

The lead-free Ba(Ti_0.96Mg_0.013Nb_0.026)O₃ composition has been prepared by solid state reaction. The room temperature X-ray diffraction revealed a perovskite phase with a tetragonal symmetry. The complex dielectric permittivity measured on cooling from 470 to 150 K in the frequency range (10²–10⁶ Hz) indicated a ferroelectric behavior and exhibited a large electromechanical response. This ferroelectric perovskite showed photoelectrochemical properties with an optical gap of 2.90 eV, n-type conduction and a flat band potential of ?0.57 V _SCE . As application, the oxide is successfully tested for the eosin oxidation under solar light. At pH ~ 6.3, 90 % of eosin (15 mg L^?1) disappeared after 6 h of illumination for a catalyst dose of 2.5 g L^?1.     

Electrochemical preparation and energy storage properties of nanoporous Co(OH)<Subscript>2</Subscript> via pulse current deposition

Nanoporous Co(OH)₂ films are electrochemically deposited on Ni foams by pulse current deposition for supercapacitor application. The pore size and density are controlled by reaction conditions including frequency modulation and reaction time. The morphology of the films is monitored by SEM, and the chemical composition and crystal structure are confirmed by XPS and XRD, respectively. The electrochemical performance of the Co(OH)₂ film is characterized by cyclic voltammetry and charge–discharge tests. The charge-transfer resistances of the electrodes are examined by electrochemical impedance spectroscopy. The Co(OH)₂ film exhibits an excellent specific capacity of 1681 F g^?1 at a current density of 2 A g^?1 in a potential range of ?0.1 to 0.4 V from the charge/discharge test; this specific capacity is much higher than that obtained by direct current deposition (623 F g^?1 at the same condition) due to the highly porous structure.     

Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles embedded in 3D reduced graphene oxide network as anode for high-performance lithium ion batteries

Mn₃O₄ nanoparticles were in-situ synthesized in the 3D framework of reduced graphene oxide (RGO) by a facile one-step hydrothermal method. In the reduced graphene-Mn₃O₄ (RGM) composite, the RGO network not only serves as a mechanical support to construct a self-supported and binder-free electrode, but also offers 3D continuous conductive network for effective electron transfer. The Mn₃O₄ nanoparticles anchored uniformly across the RGO framework, which provided high capacity and prevented the restacking of the RGO thin sheets. Based on the unique composite structures, strong synergistic effect was achieved between Mn₃O₄ and RGO, resulting in superior specific capacity, enhanced rate capability, stable cycling performance and nearly 100% Coulombic efficiency in the RGM2 composites. With an optimal Mn₃O₄ composition of 44% by weight (similarly hereinafter), the composite exhibits high specific capacities of 696–795 mAh g¹ based on the overall weight of the electrode in 60 cycles at 200 mA g^?1, with a large coulombic efficiency of around 98%. Even at a high current density of 10,000 mA g^?1, the composite can still deliver a capacity of 383 mAh g^?1, demonstrating its excellent rate performance. The outstanding performances of the composites are attributed to the synergistic effect of both components and the hierarchical structure of the composite.     

Graphene/TiO<Subscript>2</Subscript> hydrogel: a potential catalyst to hydrogen evolution reaction

In this study, graphene was synthesized from graphite. Graphite was oxidized via modified Hummer’s method and sonicated to form graphene oxide (GO). Infrared spectroscopy revealed the successful oxidation of graphite by the emergence of oxygen functionalities. The spectrum of GO showed peaks at 3270, 1629, 1227 and 1096 cm^?1, indicating O–H, C=O, C–OH and C–O–C functional groups, respectively. Graphene hydrogels were prepared by the addition of L-ascorbic acid to GO suspensions and subsequent heating at 90^°C. Composite hydrogels of graphene and titanium (IV) oxide (TiO₂) were synthesized with various TiO₂ to GO mass ratios. Composites were applied to photocatalytic hydrogen evolution reaction (HER) and the hydrogen gas produced was analysed by gas chromatography with thermal conductivity detector. Highest HER yield was 66.00% H₂.     

Systematic investigation of the effect of oxygen mobility on CO oxidation over AgPt nanoshells supported on CeO<Subscript>2</Subscript>, TiO<Subscript>2</Subscript> and Al<Subscript>2</Subscript>O<Subscript>3</Subscript>

Here, we have systematically investigated how the nature of the support influenced the oxygen mobility and activities in catalysts comprised of AgPt nanoshells deposited over inorganic oxides. We first synthesized AgPt nanoshells by galvanic replacement reaction between Ag nanospheres and PtCl₆ ^2? _(aq) combined with Pt reduction using hydroquinone as an auxiliary reducing agent. The nanoshells were then supported over TiO₂, Al₂O₃ and CeO₂. Through this methodology, we prepared materials with similar metallic nanoparticle AgPt compositions (~0.99 wt% Pt), sizes (43 ± 2 nm diameter), spherical shapes, surface morphologies, number of active sites \( (\sim4.5\;\upmu{\text{mol}}\;{\text{g}}_{{{\text{cat}} .}}^{ - 1} ) \) and uniform distribution over the supports, differing only in terms of the nature of the support. The oxide reduction temperature, its capability of re-oxidation and the presence of oxygen mobility were strongly dependent on the metal–support interaction between AgPt nanoshells and oxide supports. These properties have significantly influenced their catalytic performances toward the CO oxidation. At 230 °C, the CO oxidation TOF was 40.4 ± 0.4, 6.9 ± 1, 1.4 ± 0.8 min^?1 for AgPt/CeO₂, AgPt/TiO₂, AgPt/Al₂O₃, respectively. These differences were attributed to the concentration of oxygen vacancies in each catalyst, which presented exactly the same trend as that of the catalytic activities. Our results may have important contributions to the design of highly active metal oxide-based catalysts toward gas-phase oxidation transformations.     

A promising mechanical ball-milling method to synthesize carbon-coated Co<Subscript>9</Subscript>S<Subscript>8</Subscript> nanoparticles as high-performance electrode for supercapacitor

A Co₉S₈/C nanocomposite has been prepared using a solid-state reaction followed by a facile mechanical ball-milling treatment with sucrose as the carbon source. The phases, morphology, and detailed structures of Co₉S₈/C nanocomposite are well characterized by X-ray diffraction, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. Our experimental results show that not only a process of particle size reduction, the ball-milling treatment also promotes the carbon and Co₉S₈ combining with each other more effectively to form an ultrafine nanocomposite. When used as an electrode material in supercapacitor, Co₉S₈/C nanocomposite exhibits a high initial specific capacitance of 756.2 F g^?1 at 1 A g^?1 and excellent cycling stability with 73.4% retention after 2000 cycles. Its outstanding electrochemical properties are mainly attributed to the nanosize of particles and amorphous carbon layer coating on its surface.