Catalytic combustion of chlorobenzene over MnOx–CeO2 mixed oxide catalysts

A series of MnOx–CeO₂ mixed oxide catalysts with different compositions prepared by sol–gel method were tested for the catalytic combustion of chlorobenzene (CB), as a model of volatile organic compounds of chlorinated aromatics. MnOx–CeO₂ catalysts with different ratios of Mn/Ce + Mn were found to possess high catalytic activity in the catalytic combustion of CB, and MnOx(0.86)–CeO₂ was identified as the most active catalyst, on which the temperature of complete combustion of CB was 254 °C. Effects of systematic variation of reaction conditions, including space velocity and inlet CB concentration on the catalytic combustion of CB were investigated. Additionally, the stability and deactivation of MnOx–CeO₂ catalysts were studied by various characterization methods and other assistant experiments. MnOx–CeO₂ catalysts with high Mn/Ce + Mn ratios present a stable high activity, which is related to their high ability to remove the adsorbed Cl species and a large amount of active surface oxygen.     

Effect of ceria on the structure and catalytic activity of V2O5/TiO2–ZrO2 for oxidehydrogenation of ethylbenzene to styrene utilizing CO2 as soft oxidant

The present study was undertaken to investigate the influence of ceria on the physicochemical and catalytic properties of V₂O₅/TiO₂–ZrO₂ for oxidative dehydrogenation of ethylbenzene to styrene utilizing CO₂ as a soft oxidant. Monolayer equivalents of ceria, vanadia and ceria–vanadia combination over TiO₂–ZrO₂ (TZ) support were impregnated by a coprecipitation and wet impregnation methods. Synthesized catalysts were characterized by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, temperature programmed reduction, transmission electron microscopy and BET surface area methods. The XRD profiles of 550 °C calcined samples revealed amorphous nature of the materials. Upon increasing calcination temperature to 750 °C, in addition to ZrTiO₄ peaks, few other lines due to ZrV₂O₇ and CeVO₄ were observed. The XPS V 2p results revealed the existence of V⁴⁺ and V⁵⁺ species at 550 and 750 °C calcinations temperatures, respectively. TEM analysis suggested the presence of nanosized (<7 nm) particles with narrow range distribution. Raman measurements confirmed the formation ZrTiO₄ under high temperature treatments. TPR measurements suggested a facile reduction of CeO₂–V₂O₅/TZ sample. Among various samples evaluated, the CeO₂–V₂O₅/TZ sample exhibited highest conversion and nearly 100% product selectivity. In particular, the addition of ceria to V₂O₅/TZ suppressed the coke deposition and allowed a stable and high catalytic activity.     

Oxidation of CH4 over Pd supported on TiO2-doped SiO2: Effect of Ti(IV) loading and influence of SO2

Titania-modified silicas with different weight% of TiO₂ were prepared by sol–gel method and used as supports for Pd (1 wt%) catalysts. The obtained materials were tested in the oxidation of methane under lean conditions in absence and in presence of SO₂. Test reactions were consecutively performed in order to evaluate the thermal stability and poisoning reversibility. Increasing amounts of TiO₂ improved the catalytic activity, with an optimum of the performance for 10 wt% TiO₂ loading. Moreover, the titania-containing catalysts exhibited a superior tolerance towards SO₂ by either adding it to the reactants or feeding it as a pure pretreatment atmosphere at 350 °C. Catalysts were characterized by XPS, XRD, FT-IR and BET measurements. According to the structural and surface analyses, the mixed oxides contained Si–O–Ti linkages which were interpreted as being responsible for the enhanced intrinsic activity of supported PdO with respect to PdO on either pure SiO₂ or pure TiO₂. Moreover, the preferential interaction of the sulfur molecule with TiO₂ and the easy SO_x desorption from high surface area silica were the determining factors for the superior SO₂ tolerance of the TiO₂-doped catalysts.     

Influence of composition of MgAl2O4 supported NiCeO2ZrO2 catalysts on coke formation and catalyst stability for dry reforming of methane

Dry reforming of methane was studied over Ni catalysts supported on γAl₂O₃, CeO₂, ZrO₂ and MgAl₂O₄ (670 °C, 1.5 bar, 16–20 l CH₄ ml_catalyst⁻¹ h⁻¹). It is shown that MgAl₂O₄ supported Ni catalysts promoted with both CeO₂ and ZrO₂ are promising catalysts for dry reforming of methane with carbon dioxide. Within a certain composition range, the simultaneous promotion with CeO₂ and ZrO₂ has great influence on the amount of coke and the catalyst service time. XRD analyses indicate that formation of crystalline Ce_xZr_1−xO₂ mixed oxide phases occurs on double promotion. In particular, incorporation of low amounts of Zr in the CeO₂ fluorite structure provides stable dry reforming catalysis. As shown with TPR, promotion leads to a higher reduced state of Ni. SEM, XRD and TPR analyses demonstrate that highly dispersed, doubly promoted Ni catalysts with a strong metal-support interaction are essential for stable dry reforming and suppression of the formation of carbon filaments.     

Low-temperature catalytic combustion of chlorobenzene over MnOx–CeO2 mixed oxide catalysts

MnO_x–CeO₂ mixed oxide catalysts prepared by sol–gel method were tested for the catalytic combustion of chlorobenzene (CB), as a model of chlorinated aromatic volatile organic compounds (CVOCs). MnO_x–CeO₂ catalysts with the different ratio of Mn/Ce + Mn were found to possess high catalytic activity for catalytic combustion of CB, and MnO_x(0.86)–CeO₂ was the most active catalyst, on which the complete combustion temperature (T_90%) of chlorobenzene was 236 °C. The stability of MnO_x–CeO₂ catalysts in the CB combustion was investigated. MnO_x–CeO₂ catalysts with high Mn/Ce + Mn ratios present high stable activity, which is related to their high ability to remove Cl species adsorbed and a large amount of active surface oxygen.     

A VOx/meso-TiO2 catalyst for methanol oxidation to dimethoxymethane

Mesoporous TiO₂ was prepared by simply controlling the hydrolysis of Ti(OBu)₄ with the help of acetic acid. The mesoporous TiO₂ had a well-crystallized anatase phase and a high surface area of 290 m² g⁻¹ with a pore size of about 4 nm. The anatase phase and the mesoporous structure were maintained in the VO_x/TiO₂ catalyst with a monolayer dispersion of V₂O₅, however, the surface area decreased to 126 m² g⁻¹. The catalyst was highly active and selective for methanol oxidation, giving about 55% conversion of methanol and 85% selectivity to dimethoxymethane at 423 K.     

Solid acidities of SiO2–TiO2/montmorillonite composites synthesized under different pH conditions

SiO₂–TiO₂/montmorillonite composites were prepared under acidic, neutral and basic conditions and the solid acidity of the resulting composites were determined. All the SiO₂/TiO₂ ratio of the colloidal particles was set at 10 but the resulting SiO₂/TiO₂ ratios were significantly richer in TiO₂. The XRD patterns of the acidic composite showed expanding and broadening of the (001) reflection by intercalation of colloidal SiO₂–TiO₂ particles, but the neutral and basic composites showed only broadening of the reflections and no intercalation. The specific surface areas of the acidic, neutral and basic composites (375, 237 and 247 m²/g, respectively) were much larger than of montmorillonite (6 m²/g). The average pore sizes were about 4, 15 and 50 nm, and the amounts of solid acidic sites measured by the NH₃-TPD were 178, 95 and 86 µmol/g for the acidic, neutral and basic composites, respectively. The solid acid amount of the acidic composite was twice that of a commercial catalyst, K-10, (85 µmol/g) and much higher than the guest phase SiO₂–TiO₂ gel (16 µmol/g) or the host phase montmorillonite (6 µmol/g). The TPD peak temperatures reflect the acid strength, and were similar in all the samples, ranging from 175° to 200 °C.     

Hydrodesulphurization performance of NiW/TiO2-Al2O3 catalyst for ultra clean diesel

TiO₂-Al₂O₃ binary oxide supports were obtained by sol–gel methods from Tetra-n-butyl-titanate and pseudoboehmite/aluminium chloride resources. The typical physico-chemical properties of NiW/TiO₂-Al₂O₃ catalysts with different TiO₂ loadings and their supports were characterized by means of BET, XRD and UV–vis DRS, etc. The BET results indicated that the specific surface areas of NiW/TiO₂-Al₂O₃ catalysts were as higher as that over pure γ-Al₂O₃ support, and the pore diameters were also large. The XRD and UV–vis DRS analyzing results showed that the Ti-containing supported catalysts existed as anatase TiO₂ species and the incorporation of TiO₂ could adjust the interaction between support and active metal, and impelled the higher reducibility of tungsten. The hydrodesulphurization (HDS) performance of the series catalysts were evaluated with diesel feedstock in a micro-reactor unit, and the HDS results showed that NiW/TiO₂-Al₂O₃ catalysts exhibited higher activities of ultra deep hydrodesulphurization of diesel oil than that of NiW/Al₂O₃ catalyst. The optimal TiO₂ content of NiW/TiO₂-Al₂O₃ catalysts was about 15 m%, and the corresponding HDS efficiency could reach to 100%. The sulphur contents of diesel products over NiW/TiO₂-Al₂O₃ (from pseudoboehmite/AlCl₃) catalysts with suitable TiO₂ content could be less than 15 ppmw, which met the sulphur regulation of Euro IV specification of ultra clean diesel fuel.     

Utilization of carbon dioxide as soft oxidant for oxydehydrogenation of ethylbenzene to styrene over V2O5–CeO2/TiO2–ZrO2 catalyst

Vanadium oxide and cerium oxide doped titania–zirconia mixed oxides were explored for oxidative dehydrogenation of ethylbenzene to styrene utilizing carbon dioxide as a soft oxidant. The investigated TiO₂–ZrO₂ mixed oxide support with high specific surface area (207 m² g⁻¹) was synthesized by a coprecipitation method. Over the calcined support (550 °C), a monolayer equivalent (15 wt.%) of V₂O₅, CeO₂ or a combination of both were deposited by using wet-impregnation or co-impregnation methods to make the V₂O₅/TiO₂–ZrO₂, CeO₂/TiO₂–ZrO₂ and V₂O₅–CeO₂/TiO₂–ZrO₂ combination catalysts, respectively. These catalysts were characterized using X-ray diffraction (XRD), Raman, scanning electron microscopy (SEM), transmission electron microscopy (TEM), temperature preprogrammed reduction (TPR), CO₂ temperature preprogrammed desorption (TPD) and BET surface area methods. All characterization studies revealed that the deposited promoter oxides are in a highly dispersed form over the support, and the combined acid–base and redox properties of the catalysts play a major role in this reaction. The V₂O₅–CeO₂/TiO₂–ZrO₂ catalyst exhibited a better conversion and product selectivity than other combinations. In particular, the addition of CeO₂ to V₂O₅/TiO₂–ZrO₂ prevented catalyst deactivation and helped to maintain a high and stable catalytic activity.     

Synthesis and characterization of CuO/TiO2 catalysts for low-temperature CO oxidation

In this paper, the CuO/TiO₂ catalysts prepared by the deposition–precipitation (DP) method were extensively investigated for CO oxidation reaction. The structural characters of the CuO/TiO₂ catalysts were comparatively investigated by TG-DTA, XRD, and XPS measurements. It was shown that the catalytic behavior of CuO/TiO₂ catalysts greatly depended on the TiO₂-support calcination temperature, the CuO loading amount and the CuO/TiO₂ catalysts calcination temperature. CuO supported on the anatase phase of TiO₂-support calcined at 400 °C showed better catalytic activity than those supported on TiO₂ calcined at 500 and 700 °C. Among all our investigated catalysts with CuO loading from 2% to 12%, the catalyst with 8 wt% CuO loading exhibited the highest catalytic activity. The optimum calcination temperature of the CuO/TiO₂ catalysts was 300 °C. The XRD results indicated that the catalytic activity of the CuO/TiO₂ catalysts was related to the crystal phase and particle size of TiO₂ support and CuO active component.     

Influence of TiO2 and CeO2 on the hydrogenation activity of bulk Ni2P

TiO₂- and CeO₂-promoted bulk Ni₂P catalysts were prepared by impregnation and in-situ H₂ temperature-programmed reduction method. The prepared catalysts were characterized by XRD and XPS. The hydrogenation activities of the catalysts were studied using 1.5 wt.% 1-heptene in toluene and 1.0 wt.% phenylacetylene in ethanol as the model feeds. The results indicate that bulk Ni₂P possesses low hydrogenation activity but is tunable by simply controlling the content of the additives (TiO₂ or CeO₂), suggesting that TiO₂ and CeO₂ are effective promoters to enhance the hydrogenation activity of Ni₂P.     

Oriented polycrystalline mesoporous CeO2 with enhanced pore integrity

Mesoporous CeO₂ particles are synthesized using a sol–gel method involving Pluronic P123 or F127 tri-block copolymer and cerium acetate hydrate. Transmission electron microscopy reveals well defined meso-channels of about 10 nm in diameter and a wall framework consisting of highly oriented polycrystalline CeO₂. The [0 0 1] axis of the crystals is found to be aligned parallel to the meso-channels, and lattice coherency of [1 0 0] or [0 1 0] also exists in perpendicular plane to the channel. A cooperative self-assembly of the tri-block copolymer and Ce⁴⁺ species is believed to occur, along with the precipitation of nano-crystalline CeO₂ in the sol–gel process. It is proposed that the preferential orientation may result from a favored linkage of the low-order Miller indices {0 0 1} planes of CeO₂ to the PEO segment in the PEO–PPO–PEO tri-block copolymer micelles. The unique structural characteristics of meso-CeO₂ appear to contribute to maintaining the pore integrity during the synthesis as well as in a post-fabrication in situ TEM heating test.     

Pt-CeO2/C anode catalyst for direct methanol fuel cells

In order to develop a cheaper and durable catalyst for methanol electrooxidation reaction, ceria (CeO₂) as a co-catalytic material with Pt on carbon was investigated with an aim of replacing Ru in PtRu/C which is considered as prominent anode catalyst till date. A series of Pt-CeO₂/C catalysts with various compositions of ceria, viz. 40 wt% Pt-3–12 wt% CeO₂/C and PtRu/C were synthesized by wet impregnation method. Electrocatalytic activities of these catalysts for methanol oxidation were examined by cyclic voltammetry and chronoamperometry techniques and it is found that 40 wt% Pt-9 wt% CeO₂/C catalyst exhibited a better activity and stability than did the unmodified Pt/C catalyst. Hence, we explore the possibility of employing Pt-CeO₂ as an electrocatalyst for methanol oxidation. The physicochemical characterizations of the catalysts were carried out by using Brunauer Emmett Teller (BET) surface area and pore size distribution (PSD) measurements, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) techniques. A tentative mechanism is proposed for a possible role of ceria as a co-catalyst in Pt/C system for methanol electrooxidation.     

Study of ruthenium supported on Ta2O5–ZrO2 and Nb2O5–ZrO2 as catalysts for the partial oxidation of methane

Ru-based catalysts supported on Ta₂O₅–ZrO₂ and Nb₂O₅–ZrO₂ are studied in the partial oxidation of methane at 673–873 K. Supports with different Ta₂O₅ or Nb₂O₅ content were prepared by a sol–gel method, and RuCl₃ and RuNO(NO₃)₃ were used as precursors to prepare the catalysts (ca. 2 wt.% Ru). At 673 K high selectivity to CO₂ was found. An increase of temperature up to 773 K produced an increase in the selectivity to syngas (H₂/CO = 2.2–3.1), and this is related with the transformation of RuO₂ to metallic Ru as was determined from XRD and XPS results. At 873 K and with co-fed CO₂ an increase of the catalytic activity and CO selectivity was found. A TOF value of 5.7 s⁻¹ and H₂/CO ratio ca. 1 was achieved over Ru(Cl)/6TaZr. Catalytic results are discussed as a function of the support composition and characteristics of Ru-based phases.     

In situ DRIFTS study of the effect of structure (CeO2–La2O3) and surface (Na) modifiers on the catalytic and surface behaviour of Pt/γ-Al2O3 catalyst under simulated exhaust conditions

The nature and relative populations of adsorbed species formed on the surface of un-promoted and sodium-promoted Pt catalysts supported either on bare Al₂O₃ or CeO₂/La₂O₃-modified Al₂O₃, were investigated by in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) under simulated automobile exhaust conditions (CO + NO + C₃H₆ + O₂) at the stoichiometric point. The DRIFT spectra indicate that interaction of the reaction mixture with the Pt/Al₂O₃ catalyst leads mainly to formation of formates and acetates on the support and carbonyl species on partially positively charged Pt atoms (Pt^δ+). Although enrichment of Al₂O₃ with lanthanide elements (CeO₂ and La₂O₃) does not significantly modify the carboxylate species formed on the support, it causes significant modification of the oxidation state of Pt, as indicated by the appearance of a substantial population of carbonyl species on reduced Pt sites (Pt⁰–CO). This modification of the Pt component is enhanced when Na-promotion is used, leading to formation of carbonyl species only on electron enriched Pt (i.e., fully reduced Pt⁰ sites) and to the formation of NCO on these Pt entities (2180 cm⁻¹). The latter are thought to result from enhanced NO dissociation at Na-modified Pt sites. These results correlate well with observed differences in the catalytic performance of the three different systems.     

Preferential oxidation of CO in excess hydrogen over a nanostructured CuO–CeO2 catalyst with high surface areas

CuO–CeO₂ is prepared by coprecipitation and ethanol washing and characterized using BET, HR-TEM, XRD and TPR techniques. The results show that CuO–CeO₂ is nanosized (r_TEM = 6.5 nm) and possesses high surface area (S_BET = 138 m² g⁻¹). Furthermore, some lattice defects in the surface of CuO–CeO₂ are found, which are beneficial to enhance catalytic performance of CuO–CeO₂ in preferential oxidation of CO in excess hydrogen (PROX). Consequently, the nanostructured CuO–CeO₂ exhibits perfect catalytic performance in PROX. Namely, CO content can be lowered to less than 100 ppm at 150 °C with 100% selectivity of O₂ in the presence of 8% CO₂ and 20% H₂O at .     

Supported PdCl2CuCl2 catalysts for carbon monoxide oxidation II. XAFS characterization

A heterogenized Wacker catalyst system in which pores of a high surface area alumina were filled with an aqueous solution of PdCl₂CuCl₂ was active for the oxidation of CO near room temperature. The structure of the catalyst was studied by X-ray absorption fine structure (XAFS). The active phase of Pd was a Pd¹¹ species containing chlorine and, probably, carbonyl ligands. Direct interaction of PdPd or PdCu was not detected. The active phase of copper was found to be solid Cu₂Cl(OH)₃ particles in agreement with the X-ray diffraction (XRD) results. The presence of Cu was essential to keep the Pd in the Pd¹¹ state during the reaction. The rates of CO oxidation measured at temperatures of 30–70°C showed a minimum at 40°C, which was attributable partly to an unusual structure change of the active palladium species during the reaction at this temperature.     

Preparation and characterization of CeO2/TiO2 nanoparticles by flame spray pyrolysis

Nanocrystalline TiO₂, CeO₂ and CeO₂-doped TiO₂ have been successfully prepared by one-step flame spray pyrolysis (FSP). Resulting powders were characterized with X-ray diffraction (XRD), N₂-physisorption, Transmission Electron Microscopy (TEM) and UV-Vis spectrophotometry. The TiO₂ and CeO₂-doped TiO₂ nanopowders were composed of single-crystalline spherical particles with as-prepared primary particle size of 10-13 nm for Ce doping concentrations of 5-50 at%, while square-shape particles with average size around 9 nm were only observed from flame-made CeO₂. The adsorption edge of resulting powder was shifted from 388 to 467 nm as the Ce content increased from 0 to 30 at% and there was an optimal Ce content in association with the maximum absorbance. This effect is due to the insertion of Ce^3+/4+ in the TiO₂ matrix, which generated an n-type impurity band.     

Direct synthesis of mesoporous silicalite-1 supported TiO2–ZrO2 for the dehydrogenation of EB to styrene with CO2

Direct synthesis route was developed to support TiO₂–ZrO₂ binary metal oxide onto the carbon templated mesoporous silicalite-1 (CS-1). Metal hydroxide modified carbon particles could play a role as hard template and simultaneously support metal components on the mesopores during the crystallization of zeolites. Such supported TiO₂–ZrO₂ binary metal oxides (TZ/CS-1) showed better resistance to deactivation in the oxidative dehydrogenation of ethylbenzene (ODHEB) in the presence of CO₂. These catalysts were found to be active, selective and catalytically stable (10 h of time-on-stream) at 600 °C for the dehydrogenation of ethylbenzene (EB) to styrene (Sty).     

Oxidative carbonylation of methanol to dimethyl carbonate over CuCl/SiO2–TiO2 catalysts prepared by microwave heating: The effect of support composition

Copper(I) chloride catalysts with a loading of 20 wt%, supported on silica–titania mixed oxides with Si/Ti ratios of 1, 5, 10 and 50 were prepared by conventional and microwave heating methods and tested in the oxidative carbonylation of methanol to dimethyl carbonate (DMC). X-ray diffraction (XRD), nitrogen adsorption, X-ray photoelectron spectroscopy (XPS) and thermal gravimetric analysis (TGA) were used to examine the bulk and surface properties of the CuCl/SiO₂–TiO₂ catalysts. Quantum-chemical calculations were performed to explore the interaction of CuCl with the silica–titania support. Microwave heating showed some significant advantages over the conventional heating method, with markedly reduced preparation temperature and time, and provided improved catalytic activity in the oxidative carbonylation of methanol. The catalytic behavior of CuCl/SiO₂–TiO₂ in the test reaction studied was strongly dependent on the support composition. Incorporation of tetrahedral Ti(IV) species into the silica matrix could enhance the interaction of copper species with the oxide support. The improved catalytic performance of CuCl/SiO₂–TiO₂ in the DMC synthesis can be understood by the existence of the strong coordination interactions between the Cu⁺ centers of CuCl and the bridging oxygen atoms at the Si–O–Ti bonds in the silica–titania support.