共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
面扫描三维测量技术作为一种快速、便携、高精度的非接触式三维测量技术,在铸造领域得到了广泛的应用。本文研制了一套蓝光面扫描三维测量系统,该系统采用先进的蓝光技术,消除被测物体表面多反射特性的影响,提高了三维测量精度,单次测量精度达到0.02 mm,整体测量精度达到0.05 mm/m。并针对现有面扫描三维测量技术依靠标志点进行多视点云拼接的缺点,提出了一种基于几何特征的无标记点拼接算法,减少了人工干预,提高了测量效率。该扫描系统能够广泛应用于各类铸件的快速三维测量和精度检测 相似文献
3.
4.
5.
双目视觉三维数字化测量技术研究 总被引:1,自引:0,他引:1
双目视觉三维数字化测量是一种先进的产品数据采集技术,由于其无破坏、测量精度高、数据获取速度快等优点而被工业界和学术界广泛关注,是加快产品开发和保证产品质量的重要手段之一。文章在对国内外相关研究工作进行分析的基础上,系统地总结了双目视觉三维数字化测量技术的基本原理、研究现状,并指出在其研究过程中应解决的关键问题,明确了以后研究的方向。文章为双目视觉三维数字化测量技术研究工作的进一步展开提供了参考,对其正确、广泛地应用具有一定的指导意义。 相似文献
6.
7.
8.
面扫描三维测量技术具有非接触、测量速度快、精度高等优势,在锻压领域具有巨大的应用潜力.但是通用的面扫描三维测量设备在测量过程中易受测量规划、数据处理等人为因素影响,测量精度难以保证.为解决此问题,提出一种基于面扫描和六自由度机器手的自动化三维测量技术,该技术由六自由度机器手、三维测量头、控制系统等组成,能够充分利用机器手运动灵活、工作范围大的特点和面扫描测量速度快、精度高的优势.此外,该技术采用了一种基于矩阵直积的手眼标定算法,实现了多次测量数据的高精度自动拼合.实际应用表明,该技术能够实现复杂锻件等工业产品的快速、精确、自动三维测量和精度检测. 相似文献
9.
10.
11.
《稀有金属材料与工程》2006,23(4):23-26
结合近年来现场试验与施工实践,分析研究了中小型镍材(工业纯镍)设备与管道的特点、性能、焊接缺陷与产生原因,以及防止与消除其缺陷、优化制造施焊质量的工艺措施,并总结了若干条注意事项。 相似文献
12.
13.
V. Kulikovsky V. Vorlí?ek M. Stranyánek R. ?tvrtlík A. Kurdyumov 《Surface & coatings technology》2008,202(9):1738-1745
Hydrogen-free amorphous and nanocrystalline films were prepared by magnetron sputtering of the SiC or Si targets. Mechanical properties (hardness, elastic modulus, intrinsic stress) and film structures were investigated in dependence on the substrate bias and temperature. It was found that both hardness and elastic modulus of all amorphous a-SiC films prepared at different substrate temperatures and biases are always lower than those for bulk α-SiC single crystal while the hardness of partially crystalline SiC films is higher and the elastic modulus lower than those for α-SiC one. In contrast, both hardness and elastic modulus of all amorphous Si films are always lower than those for nanocrystalline Si films which show approximately the same value as the Si single crystal. 相似文献
14.
15.
16.
17.
Plasma alloying and spheroidization process and development 总被引:1,自引:0,他引:1
J. S. O’Dell E. C. Schofield T. N. McKechnie A. Fulmer 《Journal of Materials Engineering and Performance》2004,13(4):461-467
Elemental and blended refractory metal powders were processed using a plasma alloying and spheroidization (PAS) process. The
powders were characterized to determine changes in chemistry and morphology after processing. Five refractory metal powders
were evaluated during this investigation: (1) crystalline W, (2) spray dried Mo, (3) W-25 wt.% Re composite powder, (4) W-2
wt.% Re composite powder, and (5) Mo-40 wt.% Re composite powder. Benefits of the PAS process, such as a two-order of magnitude
reduction in oxygen contamination, production of highly spherical powders for enhanced flow characteristics, and the ability
to produce prealloyed powders were demonstrated.
This paper was presented at the 2nd International Surface Engineering Congress sponsored by ASM International, on September
15–17, 2003, in Indianapolis, Indiana, and appears on pp. 441–47 of the Proceedings. 相似文献
18.
金刚石、CBN有序排列及择优取向工具的研发及应用 总被引:1,自引:0,他引:1
有序排列/择优取向超硬材料工具的技术创新,将广泛适用于电镀、树脂、陶瓷、金属结合剂制品工具中,使用超硬材料颗粒在结合剂中均匀排列并择优定向,以最大潜能的发挥超硬材料各个方面固有的特性。并针对不同的加工对象,有选择性的使用超硬材料各自不同的特性,从而使超硬材料工具将以经济、高质与高效的优势替代传统的超硬材料工具并将进入新兴的加工领域,为生产企业带来新的发展机遇。本文将对有序排列与择优取向技术的研究现状及其在不同的金刚石工具中的应用做一阐述。 相似文献
19.
采用水热合成法制备经精氨酸表面修饰和铕掺杂的羟基磷灰石纳米颗粒(HAP-Eu)。利用透射电镜(TEM)、Zeta电位分析仪、傅立叶红外光谱仪和X射线衍射(XRD)对HAP-Eu的成分、形貌、结构、晶粒粒径和Zeta电位进行表征,并通过成像流式细胞仪研究细胞活性。结果表明:制备的HAP-Eu粒径较均匀,约为100nm,特征峰明显;在pH=7.5时,颗粒的表面净电荷均值约为30.10mV;在人上皮细胞和内皮细胞中无毒性。 相似文献
20.
软起动器及其应用设计和调试 总被引:1,自引:0,他引:1
软起动是电机起动一种新概念,跟传统的直接起动、星三角起动,自耦降压起动相比,有很大的优点。本文在介绍软起动的基础上,分析了软起动器在应用没计、现场调试及使用中应注意的问题。 相似文献