Thermoelasticity and CCD analysis of crack propagation in AA6082 friction stir welded joints

The advantages of friction stir welding (FSW) process compared to conventional fusion welding technologies have been clearly demonstrated in recent years. In the present study, AA6082 FSW joints were produced by employing different welding parameters. The principal aim of this work is to apply thermoelastic stress analysis (TSA) to study crack propagation characteristics of friction stir welded aluminum sheets, during cyclic fatigue tests. The crack propagation experiments were performed by employing single edge notched specimens; fatigue tests were performed under tension with load ratio R = 0.1. All the mechanical tests were conducted up to failure. The TSA measurement system allowed crack evolution to be observed in real-time during fatigue cycles and stress fields to be derived on the specimens from the measured temperature variation. The thermoelastic data were used to analyse principal stresses and principal strains on the specimens surface and the crack growth rate during tests. In addition, it was possible to evaluate all the joints defects effects, as a function of welding parameters, correlating effects on different crack growth rate and instabilities. The achieved results were compared with those obtained by classical CCD camera monitoring of crack front propagation during cyclic loading and all the results were validated by employing finite element analysis performed with ABAQUS software.     

Recent developments in local concepts of fatigue assessment of welded joints

Several lately proposed modifications or variants of the structural stress or strain concepts, of the notch stress or strain concepts (also termed ‘local stress or strain concepts’) and of the fracture mechanics concepts of fatigue assessment of welded joints are reviewed, whereas the wider context is presented in a recently republished and actualised standard work. The structural stress concepts described first are based on a linearisation of the stress distribution across the plate thickness or along the anticipated crack path and, alternatively, on the structural stress 1 mm in depth below the weld toe. The structural stress is defined and set against design S–N curves. A further structural stress concept is presented for welded joints in thin-sheet steels and aluminium alloys. Among the elastic notch stress concepts, the variant with the reference notch radius, ρ_r = 1 mm, recently verified also for welded joints in aluminium alloys with plate thicknesses t ? 5 mm and the variant with a small-size reference notch radius, ρ_r = 0.05 mm, applicable to welded joints in thin-sheet materials, are outlined. The elastic–plastic notch strain concept is applied to a spot-welded tensile-shear specimen starting from a small-size keyhole notch at the nugget edge. The novel notch stress intensity factor (NSIF) approach relating to crack initiation and extrapolated to final fracture of seam-welded joints in steels and in aluminium alloys is reviewed. A more recently developed crack propagation approach for spot welds is finally described.     

Fatigue life prediction based on crack closure for 6156 Al-alloy laser welded joints under variable amplitude loading

A fatigue prediction approach is proposed using fracture mechanics for laser beam welded Al-alloy joints under stationary variable amplitude loading. The proposed approach was based on the constant crack open stress intensity factor in each loading block for stationary variable amplitude loading. The influence of welding residual stress on fatigue life under stationary variable amplitude was taken into account by the change of crack open stress intensity factor in each loading block. The residual stress relaxation coefficient β = 0.5 was proposed to consider the residual stress relaxation for the laser beam welded Al-alloy joints during the fatigue crack growth process. Fatigue life prediction results showed that a very good agreement between experimental and estimated results was obtained.     

Fatigue crack propagation behavior in friction stir welding of AA6063-T5: Roles of residual stress and microstructure

Behavior of fatigue crack which was propagated at some representative areas in the friction stir welded (FSWed) joint of aluminum alloy 6063-T5 was studied. By extracting the T–L orientation specimens so that the loading axis on the fatigue test and the crack propagation direction were transverse and longitudinal to the welding direction, respectively, the crack propagation tests were carried out for both the as-welded and post-weld heat treated (PWHTed) FSWs at room temperature and 200 °C. The experiments showed that the fatigue crack propagation (FCP) rates were sensitive to the propagating location, the test temperature, and the PWHT condition as well. It was also found that the different FCP rates were driven by the microstructural influences in and around the welded zone. While the residual stress was remarkable in the shoulder limit areas, it had a minor effect on the FCP behavior.     

Fatigue life prediction for toe ground welded joints

The paper presents the results of an investigation of the effect of weld toe burr grinding on the fatigue performance of non-load-carrying transverse fillet welded joints. Crack initiation and propagation were monitored by a modified replica method. It was found that, although the average life increase due to toe grinding was in agreement with published data, the majority of the fatigue cracks in specimens that gave fatigue lives <～10⁶ cycles initiated at flaws just beneath the ground surface. Both the experiments and calculations based on fracture mechanics suggested that the fatigue lives of the toe ground joints in this life regime were dominated by the crack propagation process. However, in the long life regime (>10⁶ cycles), crack initiation became significant. Reasonable estimates of the crack initiation period were made using the local stress approach proposed by Lawrence et al. [Lawrence FV, Mattos RJ, Higashida Y, Burk JD. Estimating the fatigue crack initiation life of welds. In: Hoeppner DW, editor, Fatigue Testing of Weldments, ASTM STP 648, American Society for Testing and Materials; 1978, p. 134–58]. The investigation suggested that more benefit from weld toe grinding could be claimed in the long (N > 10⁶ cycles) than the short life regime.     

Fatigue crack initiation behaviors throughout friction stir welded joints in AA7075-T6 in ultrasonic fatigue

This paper presents the results of experimental investigation on fatigue behaviors of friction stir welded joints in AA7075-T6 with ultrasonic fatigue test system (20 kHz). Two kinds of particles, Fe-rich intermetallic compounds and Mg₂Si-based particles, governed the fatigue crack initiation. The plastic deformation and recrystallization during welding process led to the changes in particle size and micro crack occurrence between thermo-mechanically affected zone (TMAZ) and nugget zone (NZ). Therefore, the fatigue crack initiation sites leaned to be located at the TMAZ in short fatigue life, or at the NZ in very high cycle fatigue regime.     

Mechanical behaviour of dissimilar friction stir welded tailor welded blanks in Al–Mg alloys for Marine applications

Tailor welded blanks (TWB) in Al alloys are an attractive structural solution for application in the shipbuilding sector, mainly due to reductions in weight and lower production costs. In the present study, the global and local mechanical properties of dissimilar friction stir welded TWB were assessed. The joints were manufactured with dissimilar Al–Mg alloys and thicknesses (6 and 8 mm) of particular interest to the shipbuilding sector (AA5083 and AA5059). A digital image correlation system (DIC) linked to a tensile test system was used to characterise the local strain fields, and true stress–strain curves were generated for several TWB sub-zones. Microhardness and DIC analyses showed that the stir zone of the TWB presented overmatching in relation to the weakest base material, and that the joints displayed excellent overall mechanical performance that was comparable to the AA5059 base material in terms of strength and ductility. The fatigue strength was evaluated by means of tension–tension fatigue tests, and the TWB joints reached the fatigue keen with a stress range of 70 MPa.     

An experimental investigation of fatigue behavior and deformation of double spot friction welded joints

Fatigue behavior of double spot friction welded joints in aluminum alloy 7075-T6 plates is investigated by conducting monotonic tensile and fatigue tests. The spot friction welding procedures are carried out by a milling machine with a designed fixture at the best preliminary welding parameter set. The fatigue tests are performed in a constant amplitude load control servo-hydraulic fatigue testing machine with a load ratio of (R = P_min/P_max) 0.1 at room temperature. It is observed that the failure mode in cyclic loading (low-cycle and high-cycle) resembles that of the quasi-static loading conditions i.e. pure shearing. Primary fatigue crack is initiated in the vicinity of the original notch tip and then propagated along the circumference of the weld’s nugget.     

Generalised Neuber concept of fictitious notch rounding

The microsupport effect at sharp notches subjected to high-cycle fatigue can be described according to Neuber by averaging the maximum notch stress in a small material volume (microsupport length ρ^*) at the notch root (radius ρ). The averaged stress may be expressed by the maximum stress of a corresponding notch of an enlarged, fictitious radius, ρ_f = ρ + sρ^*, where s is the microsupport factor. The status of Neuber’s concept within his general theory of notch stresses is reviewed, followed by more recent theoretical and application-relevant developments. The theoretical developments refer to the notch angle dependency of the support factor, to its value for pointed versus rounded notches and to in-plane shear loading with out-of-bisector crack propagation. The application developments refer to the fatigue assessment of welded joints.     

Experimental investigation of R-ratio effects on fatigue crack growth of adhesively-bonded pultruded GFRP DCB joints under CA loading

A series of fatigue experiments was performed in order to investigate the effect of the R-ratio on the fatigue/fracture behavior of adhesively-bonded pultruded GFRP double cantilever beam joints. Constant amplitude fatigue experiments were carried out under displacement control with a frequency of 5 Hz in ambient laboratory conditions. Three different R-ratios were applied: R = 0.1, R = 0.5 and R = 0.8. The crack length was determined by means of crack gages and a dynamic compliance method. The dominant failure mode was a fiber-tear failure that occurred in the mat layers of the pultruded laminates. The depth of the crack location significantly affected the energy dissipated for the fracture under cyclic loading. Short-fiber and roving bridging increased the fracture resistance during crack propagation. Fatigue crack growth curves were derived for each R-ratio and each observed crack path location. The fatigue threshold and slope of the fatigue crack growth curve significantly increased with increased R-ratio.     

Effect of welding parameters on mechanical and microstructural properties of dissimilar AA6082–AA2024 joints produced by friction stir welding

The effect of processing parameters on the mechanical and microstructural properties of dissimilar AA6082–AA2024 joints produced by friction stir welding was analysed in this study. Different samples were produced by varying the advancing speeds of the tool as 80 and 115 mm/min and by varying the alloy positioned on the advancing side of the tool. In all the experiments the rotating speed is fixed at 1600 RPM. All the welds were produced perpendicularly to the rolling direction for both the alloys. Microhardness (HV) and tensile tests performed at room temperature were used to evaluate the mechanical properties of the joints. The mechanical tests were performed on the joints previously subjected to annealing at 250 °C for 1 h. For the fatigue tests, a resonant electromechanical testing machine was employed under constant loading control up to 250 Hz sine wave loading. The fatigue tests were conducted in the axial total stress–amplitude control mode, with R = σ_min/σ_max = 0.1. In order to analyse the microstructural evolution of the material, the welds’ cross-sections were observed optically and SEM observations were made of the fracture surfaces.     

Evaluation of microstructures and mechanical properties of friction stir welded lap joints of Inconel 600/SS 400

The microstructures and mechanical properties of friction stir welded Inconel 600 and SS 400 lap joints were evaluated in this study. Friction stir welding was carried out at a tool rotation speed of 200 rpm and a welding speed of 100 mm/min. Application of friction stir welding was notably effective in reducing the grain size of the stir zone, as a result, the average grain size of Inconel 600 was reduced from 20 μm in the base material to 8.5 μm in the stir zone. The joint interface between Inconel 600 and SS 400 was soundly welded without voids and cracks, and MC carbides with a size of 50 nm were partially formed in the region of the lap joint interface in Inconel 600. In addition, a hook from SS 400 was formed on the advancing side of the Inconel 600 alloy, which directly affected an increase in the peel strength of the weld. In this study, we systematically discussed the effect of friction stir welding on the evolution of the microstructures and mechanical properties of friction stir lap jointed Inconel 600 and SS 400.     

Fatigue design of wire-wound pressure vessels using ASME-API 579 procedure

The wire winding of high pressure vessels is a technique usually applied to introduce initial compressive stresses in the inner core of the vessel, with the aim to improve the fatigue life under cyclic pressure conditions. In this work, the procedure followed to calculate the number of design cycles is presented, using the fracture mechanics approach and the structural integrity concepts. In particular, the API 579-1/ASME FFS-1 procedure has been used to analyse the structural integrity of the vessel through the crack propagation stage. Starting from a postulated internal semi-elliptical crack the number of design cycles is determined, the flaw aspect ratio is updated and the structural integrity of the cracked vessel is evaluated using the Failure Assessment Diagram (FAD). Different propagation laws, which take into account for negative stress intensity ratio factors R = K_min/K_max < 0, are reviewed, because of their high influence on the fatigue life of wire-wound vessels. In addition, this paper presents a number of useful expressions to calculate the stress intensity factor (SIF) for internal semi-elliptical cracks in wire-wound pressure vessels, in order to carry out the numerical integration of the number of cycles, updating the flaw aspect ratio, during the fatigue crack growth.     

Characterisation of fatigue fracture surfaces of friction stir channelling specimens tested at different temperatures

The fatigue fracture surfaces of friction stir channelling specimens tested at room temperature, 120 °C and 200 °C were observed in a scanning electron microscope (SEM) in order to analyse their morphology and the crack propagation mechanisms. Three different friction stir channelling conditions were tested and analysed. For all specimens tested the developing fatigue-crack has always initiated at the advancing side, namely on the boundary between the nugget and the thermo mechanically affected zone (TMAZ) into the interior of the specimen. The crack has propagated through the channel nugget with a path tangential to the advancing side. After the crack has reached the processed surface, a second crack initiated at the channel bottom. The fracture surfaces have shown a semi-elliptical shape crack front. This second crack has propagated uniformly through the base material. Fatigue crack propagation on the TMAZ was mainly characterised by fatigue striations. It was found, on most of the surfaces observed, a clear coexistence of the intergranular fracture mode and the transgranular fracture mode. A relationship between the fatigue testing temperature and the roughness of the fracture surfaces was found. The fracture surfaces roughness was considerably lower at a testing temperature of 200 °C for the three friction stir channelling conditions analysed.     

Very high cycle fatigue of nitrided 18Ni maraging steel sheet

Thin sheets of nitrided 18Ni maraging steel are tested under cyclic tension (load ratio R = 0.1) in the very high cycle fatigue (VHCF) regime. The ultrasonic fatigue testing method with a cycling frequency of about 20 kHz has been further developed for these experiments. Sheet specimens with 0.35 mm thickness are mounted on a carrier specimen, they are pre-stressed and are forced to vibrate jointly. Between 10⁷ and 10⁹ cycles, fatigue cracks are initiated exclusively at internal TiN inclusions. The areas of the crack initiating inclusions projected perpendicular to the applied tensile stress are evaluated. The square root of inclusion areas, (area_INC)^1/2 lies between 2.5 μm and 5.3 μm. Considering inclusions as cracks, their stress intensity range is between ΔK_INC = 1.3 MPa m^1/2 and 2.4 MPa m^1/2. The sizes of crack initiating inclusions influence fatigue lifetimes. This is considered in a crack propagation model and by presenting lifetimes versus the stress amplitudes multiplied by (area_INC)^1/12. A mean lifetime of 10⁹ cycles is found at a stress amplitude of 22% of the tensile strength, which is comparable to other high strength steels tested under cyclic tension.     

Effects of microstructural heterogeneity on very high cycle fatigue properties of 7050-T7451 aluminum alloy friction stir butt welds

In this study, the very high cycle fatigue (VHCF) properties of 7050-T7451 aluminum alloy and its friction stir welding (FSW) butt welds have been investigated. The results show that the failure of FSW joints still occurs at 7.0 × 10⁸ cycles. The fatigue properties of the FSW joints are superior to those of the base material, especially in the super long life regime. Most fatigue cracks initiate at the thermo-mechanically affected zone and heat affected zone on the advancing side of the FSW joints, and the susceptibility of these zones to fatigue is attributed to the metallurgical heterogeneity.     

Fatigue behavior of surface cracked filament wound pipes with high tangential strength in corrosive environment

The aim of this study is to examine the corrosion fatigue behavior of filament wound composite pipes with a surface crack under alternating internal pressure. The filament wound pipes are composed of multi-layered E-glass/epoxy composites with a [±75°]₃ lay-up. The surface notches were formed on the outer surface of the pipe along the pipe axis. Dilute (0.6 M) HCl acid was applied to the surface crack region by a corrosion cell mounted on the outer surface of the pipe. The results of an experimental investigation into the corrosion fatigue tests are conducted to observe the oil leakage failure and the crack propagation of the composite pipe subjected internal pressure loading with an open ended condition in which the pipe can be deformed freely in the axial direction. The internal pressure was generated by conventional hydraulic oil for fatigue loading. The fatigue tests are performed at 0.42 Hz frequency and a stress ratio of R = 0.05 in accordance with ASTM D-2992 standard. The oil leakage from the crack tip was observed after the crack propagation reached to the critical stress intensity level. The fatigue crack propagation behavior with the environment exposure was strongly dependent on the crack parameters such as crack-depth ratio and crack-aspect ratio. The micro structure of the fracture surface with the effect of environment and the fatigue loading were also observed.     

Tensile behavior of friction stir welded AA 6061-T4 aluminum alloy joints

In this investigation response surface methodology based on a central composite rotatable design with three parameters, five levels and 20 runs, was used to develop a mathematical model predicting the tensile properties of friction stir welded AA 6061-T4 aluminum alloy joints at 95% confidence level. The three welding parameters considered were tool rotational speed, welding speed and axial force. Analysis of variance was applied to validate the predicted model. Microstructural characterization and fractography of joints were examined using optical and scanning electron microscopes. Also, the effects of the welding parameters on tensile properties of friction stir welded joints were analyzed in detail. The results showed that the optimum parameters to get a maximum of tensile strength were 920 rev/min, 78 mm/min and 7.2 kN, where the maximum of tensile elongation was obtained at 1300 rev/min, 60 mm/min and 8 kN.     

Fatigue lifetime and tearing resistance of AA2198 Al–Cu–Li alloy friction stir welds: Effect of defects

The fatigue strength and failure mechanisms of defect-free (“sound”) and flaw bearing friction stir butt-welds of 3.1 mm-thick AA2198-T8 Al–Li–Cu alloy have been investigated via S–N curves at R = 0.1 using cross weld specimens. The fatigue strength of sound welds is only reduced by 10–15% at the aimed lifetime of 10⁵ cycles compared to the base material. Joint Line Remnant (JLR) bearing welds have a similar fatigue strength as sound welds and the JLR is not the crack initiation site. Kissing Bond (KB) bearing welds that have undergone a weld root polishing show a reduction in fatigue strength by 17% compared to sound welds. For specimens loaded at or above yield strength of the weld nugget the crack systematically initiates from the KB during the first cycle, which is interpreted further using fracture mechanics. The strongest reduction, about 28% in fatigue strength, is found for welds with an initial gap between the parent sheets (GAP welds) along with initiation at intergranular surface microcracks. Kahn tear tests show a reduction in tearing resistance for the flaw bearing welds with a similar ranking as for the fatigue strength.     

22 Cr 5 Ni duplex and 25 Cr 7 Ni superduplex stainless steel: Hydrogen influence on fatigue crack propagation resistance

Duplex stainless steels (DSS) fatigue crack propagation resistance is strongly affected by both microstructure and environment. In this work, environment influence on the fatigue crack propagation in a 22 Cr 5 Ni duplex and in a 25 Cr 7 Ni superduplex stainless steels is investigated considering three different stress ratios (R = K_min/K_max = 0.1, 0.5, 0.75). Tests are performed according to ASTM E 647 standard, both in air and under hydrogen charging conditions (0.1 M H₂SO₄ + 0.01 M KSCN aqueous solution, ?0.9 V/SCE). Crack fracture surfaces are extensively analysed by means of a scanning electron microscope. Furthermore, crack paths are investigated by means of a crack profile analysis performed through a light optical microscope. Nickel coated fracture surface sections obtained for constant ΔK values are considered in order to analyse the loading (R values) and environment influence on fatigue crack paths.