Synthesis of pH‐responsive polyethylene terephthalate track‐etched membranes by grafting hydroxyethyl‐methacrylate using atom‐transfer radical polymerization method

pH‐responsive polyethylene terephthalate (PET) track‐etched membranes were synthesized by grafting 2‐hydroxyethyl‐methacrylate (HEMA) on the surface of the membrane via atom transfer radical polymerization. The controllability of grafting polymerization of HEMA on membrane surface is systematically investigated. The pH‐responsive characteristics of PET‐g‐poly(2‐hydroxyethyl‐methacrylate) (PHEMA) gating membranes with different grafted PHEMA chain lengths are measured by tracking the permeation of water solution with different pH values. The results show that the grafting polymerization is controllable, and the permeation of grafted membranes is affected by the grafted PHEMA chain lengths on the surface of membrane. The results also demonstrate that the grafted PET membranes exhibit reversible pH‐response permeation to environmental pH values. Desired pH‐responsive membranes are obtained by controlling the grafted PHEMA chain lengths via atom transfer radical polymerization method. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40912.     

Synthesis of well‐defined responsive membranes with fixable solvent responsiveness

A versatile method is described to synthesize a new family of solvent‐responsive membranes whose response states can be not only tunable but also fixable via ultraviolet (UV) irradiation induced crosslinking. The atom transfer radical polymerization (ATRP) initiator 2‐bromoisobutyryl bromide was first immobilized on the poly(ethylene terephthalate) (PET) track‐etched membrane followed by room‐temperature ATRP grafting of poly(2‐hydroxyethyl methacrylate) (PHEMA) and poly(2‐hydroxyethyl methacrylate‐co‐2‐(dimethylamino)ethyl methacrylate) (P(HEMA‐co‐DMAEMA)) respectively. The hydroxyl groups of PHEMA were further reacted with cinnamoyl chloride (a photosensitive monomer) to obtain photo‐crosslinkable PET‐g‐PHEMA/CA membrane and PET‐g‐P(HEMA/CA‐co‐DMAEMA) membrane. The length of grafted polymer chains was controllable by varying the polymerization time. X‐ray photoelectron spectroscopy, Fourier transform infrared spectroscopy in attenuated total reflection and thermogravimetric analysis were employed to characterize the resulting membranes. The various membrane surface morphologies resulting from different states of the grafted chains in water and dimethylformamide were characterized by scanning electron microscopy. It was demonstrated that the grafted P(HEMA/CA‐co‐DMAEMA) chains had more pronounced solvent responsivity than the grafted PHEMA/CA chains. The surface morphologies of the grafted membranes could be adjusted using different solvents and fixed by UV irradiation crosslinking. © 2014 Society of Chemical Industry     

Surface‐initiated atom transfer radical polymerization of regenerated cellulose membranes with thermo‐responsive properties

Using atom transfer radical polymerization (ATRP), thermo‐responsive regenerated cellulose membranes were synthesized. Regenerated cellulose membranes were firstly modified by reacting the hydroxyl groups on the surface with 2‐bromoisobutyryl bromide, followed by grafting with poly(N‐isopropylacrylamide). The membranes had obvious thermally modulated permeability properties. Analysis was carried out by means of X‐ray photoelectron spectroscopy, attenuated total reflection Fourier transform infrared spectroscopy, scanning electron microscopy and thermogravimetric analysis. The results showed that N‐isopropylacrylamide had been grafted successfully on the surface of the regenerated cellulose membranes. The thermally modulated permeability properties of the grafted membranes were studied using water flux measurements. It was found that the thermally modulated permeability properties of a cellulose surface can be tailored by the use of the ATRP method. Copyright © 2010 Society of Chemical Industry     

Influence of pore size and pore shape on thermo‐sensitive properties of poly[(ethylene terephthalate)‐graft‐(N‐isopropylacrylamide)] track membranes

BACKGROUND: The main aim of this work was to prepare poly[(ethylene terephthalate)‐graft‐(N‐isopropylacrylamide)] (PET‐graft‐NIPAAm) track membranes with various pore shapes and pore sizes, and to investigate the influence of pore shape and pore size on the thermo‐sensitive properties of the membranes. The PET‐graft‐NIPAAm track membranes were prepared using UV illumination, chemical etching and γ‐irradiation polymerization. Their thermo‐sensitive properties were investigated using conductimetry. RESULTS: PET track membranes with four kinds of pore shapes and sizes were prepared using chemical etching by changing the UV illumination time. After γ‐irradiation, NIPAAm was grafted into the etched PET track membranes both inside the pores and on the membranes. Conductimetric measurements showed that only membranes with appropriate pore shape and pore size had thermo‐sensitive properties. When the grafting ratio was 5 wt%, membranes with both small double cone‐shaped pores and with very large cylinder‐shaped pores showed no thermo‐sensitive properties. CONCLUSION: Along with the grafting ratio, the pore shape and pore size also have an influence on the thermo‐sensitive properties of PET‐graft‐NIPAAm track membranes. Copyright © 2009 Society of Chemical Industry     

Low protein fouling polypropylene membrane prepared by photoinduced reversible addition‐fragmentation chain transfer polymerization

In this study, 2‐hydroxyethyl methacrylate and N‐isopropyl acrylamide was block grafted onto the polypropylene macroporous membrane surface by photo‐induced reversible addition‐fragmentation chain transfer (RAFT) radical polymerization with benzyl dithiobenzoate as the RAFT agent. The degree of grafting of poly(2‐hydroxyethyl methacrylate) on the membrane surface increased with UV irradiation time and decreased with the chain transfer agent concentration increasing. The poly(2‐hydroxyethyl methacrylate)‐ grafted membranes were used as macro chain transfer agent for the further block graft copolymerization of N‐isopropyl acrylamide in the presence of free radical initiator. The degree of grafting of poly(N‐isopropyl acrylamide) increased with reaction time. Furthermore, the poly(2‐hydroxyethyl methacrylate)‐ grafted membrane with a degree of grafting of 0.48% (wt) showed the highest relative pure water flux and the best antifouling characteristics of protein dispersion. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Grafting polymer from poly(ethylene terephthalate) films by surface‐initiated ATRP

Surface‐initiated atom transfer radical polymerization (ATRP) from poly(ethylene terephthalate) (PET) film was studied. Poly(methyl methacrylate) (PMMA), poly (acrylamide) (PAAM), and their diblock copolymer (PMMA/PAAM) on the surface of PET film were successfully prepared by surface‐initiated ATRP. The structures and properties of the modified PET film were characterized by FT‐IR/ATR, X‐ray photoelectron spectroscopy (XPS), measurements of contact angles, and scanning electronic microscopy (SEM). The results indicate that the surface properties of PET film were greatly improved by grafted polymer. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Improving the antifouling property of poly(vinyl chloride) membranes by poly(vinyl chloride)‐g‐poly(methacrylic acid) as the additive

To improve the antifouling property of poly(vinyl chloride) (PVC) membranes, a series of poly(methacrylic acid) grafted PVC copolymers (PVC‐g‐PMAA) with different grafting degree were synthesized via one‐step atom transfer radical polymerization process utilizing the labile chlorines on PVC backbones followed by one‐step hydrolysis reaction. PVC/PVC‐g‐PMAA blend membranes with different grafting degree and copolymer content were prepared by nonsolvent induced phase separation method. The surface chemical composition, surface charge, membrane structures, wettability, permeability, separation performances and the fouling resistance of blend membranes were carefully investigated. The results indicated that the PMAA chains were segregated towards the surface and the membranes were endowed with negative charge. The hydrophilicity and permeability of the blend membranes were obviously improved. Furthermore, the antifouling ability especially at neutral or alkaline environments was also significantly increased. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42745.     

Study on the influence of reaction time on the structure and properties of the PVDF membrane modified through the method of atom transfer radical polymerization

A thermo‐responsive membrane, poly(vinylidene fluoride) (PVDF‐g‐PNIPAAm), was successfully prepared from PVDF membrane through surface‐initiated atom transfer radical polymerization (ATRP) of a thermo‐responsive monomer, N‐isopropyl acrylamide (NIPAAm). The influence of the reaction time on ATRP was studied in detail. The grafting membrane was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) and X‐ray photoelectron spectroscopy (XPS). The results showed that NIPAAm was successfully grafted on the PVDF membrane, the membrane pores became smaller and the reaction time of 36 h was in favor of surface‐initiated ATRP. The thermal stability of PVDF membrane and PVDF‐g‐PNIPAAm membranes was characterized by differential scanning calorimetry (DSC). Contact angles of membrane surface, water penetration and protein solution permeation were tested. Water contact angles of PVDF membrane reduced after the surface grafting of NIPAAm, which illuminated that the hydrophilicity of the grafted membrane was improved. The PVDF‐g‐PNIPAAm membranes exhibited good thermo‐responsive permeability and antifouling property. POLYM. ENG. SCI., 54:1013–1018, 2014. © 2013 Society of Plastics Engineers     

Grafting of polyacrylamide from poly(ethylene terephthalate) films

Poly(ethylene terephthalate) (PET) films were modified via the grafting of polyacrylamide (PAAM) onto the surface by surface‐initiated atom transfer radical polymerization and UV‐initiated grafting. The surface composition and morphology of the modified PET films were characterized by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, and scanning electron microscopy (SEM). The results show that the surface of the PET film was grafted by PAAM, with its own surface morphology different from that of PET. The properties of the modified PET films were studied by contact‐angle, peeling force, penetrability, haze, and friction factor measurements. The results indicate that the peeling force and friction factor of the modified PET films were higher than those of the unmodified PET film. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Functionalization of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) films via surface‐initiated atom transfer radical polymerization: Comparison with the conventional free‐radical grafting procedure

We modified hydrophobic poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBHV) films with hydrophilic chains to control their surface properties. We designed and investigated surface‐initiated atom transfer radical polymerization (SI‐ATRP) to modify the PHBHV films by grafting poly(2‐hydroxyethyl methacrylate) (PHEMA) from the surface. This method consisted of two steps. In the first step, amino functions were formed on the surface by aminolysis; this was followed by the immobilization of an atom transfer radical polymerization initiator, 2‐bromoisobutyryl bromide. In the second step, the PHEMA chains were grafted to the substrate by a polymerization process initiated by the surface‐bound initiator. The SI‐ATRP technique was expected to favor a polymerization process with a controlled manner. The experimental results demonstrate that the grafting density was controlled by the reaction conditions in the first step. The grafted films were analyzed by Fourier transform infrared spectroscopy, contact angle testing, scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy. The results show that grafted chains under the SI‐ATRP method were preferentially located on the surface for surface grafting and in the bulk for conventional free‐radical polymerization initiated by benzoyl peroxide. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Surface grafting polymerization of N‐vinyl‐2‐pyrrolidone onto a poly(ethylene terephthalate) nonwoven by plasma pretreatment and its antibacterial activities

The objective of this research was the surface grafting polymerization of biocompatible monomer N‐vinyl‐2‐pyrrolidone (NVP) onto a plasma‐treated nonwoven poly(ethylene terephthalate) (PET) substrate with ultraviolet (UV)‐induced methods. The effects of various parameters, such as the monomer concentration, reaction time, initiator (ammonium peroxodisulfate) concentration, and crosslinking agent (N,N′‐methylene bisacrylamide) concentration, on the grafting percentage were studied. The grafting efficiency of the modified nonwoven PET surfaces reached a maximum at 50 min of UV irradiation and with a 30 wt % aqueous NVP solution. After the plasma activation and/or grafting, the hydrophobic surface of the nonwoven was modified into a hydrophilic surface. NVP was successfully grafted onto nonwoven PET surfaces. The surface wettability showed that the water absorption of NVP‐grafted nonwoven PET (NVP‐g‐nonwoven PET) increased with increasing grafting time. NVP‐g‐nonwoven PET was verified by Fourier transform infrared spectra and scanning electron microscopy measurements. An antibacterial assessment using an anti‐Staphylococcus aureus test indicated that S. aureus was restrained from growing in NVP‐g‐nonwoven PET. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 803–809, 2006     

Preparation and characterization of grafting polyacrylamide from PET films by SI‐ATRP via water‐borne system

The grafted homopolymer and comb‐shaped copolymer of polyacrylamide were prepared by combining the self‐assembly of initiator and water‐borne surface‐initiated atom transfer radical polymerization (SI‐ATRP). The structures, composition, properties, and surface morphology of the modified PET films were characterized by FTIR/ATR, X‐ray photoelectron spectroscopy (XPS), contact angle measurement, and scanning electronic microscopy (SEM). The results show that the surface of PET films was covered by equable grafting polymer layer after grafted polyacrylamide (PAM). The amount of grafting polymer increased linearly with the polymerization time added. The GPC date show that the polymerization in the water‐borne medium at lower temperature (50°C) shows better “living” and control. After modified by comb‐shaped copolymer brushes, the modified PET film was completely covered with the second polymer layer (PAM) and water contact angle decreased to 13.6°. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Surface initiated ATRP of acrylic acid on dopamine‐functionalized AAO membranes

A facile method for surface‐initiated atom transfer radical polymerization (ATRP) on the anodic aluminum oxide (AAO) membranes has been developed. The AAO membrane was firstly functionalized by poly(dopamine), the bromoalkyl initiator was then immobilized on the poly(dopamine) functionalized AAO membrane surface in a two‐step solid‐phase reaction, followed by ATRP of acrylic acid in a aqueous solution. The poly(acrylic acid) (PAAc)‐grafted AAO membranes were characterized by X‐ray photoelectron spectroscopy, fourier transform infrared spectroscopy and scanning electron microscopy. The XPS and FTIR results indicated that PAAc was successfully grafted on the AAO membrane surface. The degree of grafting increases linearly with the increase of monomer concentration, and it reaches a plateau when the reaction time up to 4 h. The results indicate that the thickness of the grafted polymer inside the isocylindrical pores of AAO membranes could be well controlled by changing the reaction time and monomer concentration. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermoresponsive surface prepared by atom transfer radical polymerization directly from poly(vinylidene fluoride) for control of cell adhesion and detachment

Thermoresponsive surface was prepared from commercial poly(vinylidene fluoride) (PVDF) films via surface‐initiated atom transfer radical polymerization. The direct initiation of the secondary fluorinated site of PVDF facilitated grafting of the N‐isopropylacrylamide (NIPAAm) monomer. The PVDF surfaces grafted with poly(N‐isopropylacrylamide) [P(NIPAAm)] were characterized by X‐ray photoelectron spectroscopy. Kinetics study revealed that the P(NIPAAm) chain growth from the PVDF surface was consistent with a “controlled” process. The temperature‐dependent swelling behavior of the surfaces in aqueous solution was studied by atomic force microscope. At 37°C [above the lower critical solution temperature (LCST, about 32°C) of NIPAAm], the seeded cells adhered and spread on the NIPAAm grafted PVDF surface. Below the LCST, the cells detached from the P(NIPAAm)‐grafted PVDF surface spontaneously. The thermoresponsive surfaces are potentially useful as stimuli‐responsive adhesion modifiers in the biomedical fields.© 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Surface grafting modification of fibrous silicates with polyvinylpyrrolidone and its application in nanocomposites

Chemical surface modification of fibrous silicate with polyvinylpyrrolidone (PVP) or its derivates via grafting‐from and grafting‐to methods was investigated. The grafting‐from method was based on the immobilization of reactive end functional groups of silane coupling agents on silicate surface, followed by chain growth via radical polymerization of N‐vinylpyrrolidone (NVP) to form grafted polymers with different molecular weight. In the grafting‐to method, a novel copolymer PVP‐171 with side functionalized groups and designed molecular weight was synthesized by radical polymerization of NVP and vinyltrimethoxysilane (DB171) and then bonded to the surface of fibrous silicates. Evidences from FTIR, XPS, TGA, and BET test indicate that there are ～ 68,000 reactive sites per square meters on the surface with the grafted vinyl concentration of 59 mequiv per 100 g of clay. XRD patterns and SEM images demonstrate that grafting modification was bound on the silicate surface and make the surface rough with the increase of graft‐loading quantity. In contrast with grafting‐to approach, grafting‐from approach facilitates the dispersion of silicates in PET composites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Alkali‐responsive membrane prepared by grafting dimethylaminoethyl methacrylate onto ethylene vinyl alcohol copolymer membrane

An alkali‐responsive membrane was prepared by grafting dimethylaminoethyl methacrylate (DMAEMA) onto ethylene vinyl alcohol copolymer (EVAL) membrane using ultraviolet (UV) irradiation graft polymerization. A subtranslucent state of EVAL membrane swelling in the DMAEMA solution was observed, and such a state enabled the passage of UV light through all the pores, inducing graft polymerization inside the pores and on the back. Attenuated total reflectance Fourier‐transform infrared spectrometer (ATR‐FTIR), X‐ray photoelectron spectroscopy (XPS), field‐emission scanning electron microscopy (FESEM), and energy‐dispersive X‐ray spectroscope (EDX) confirmed that the poly(DMAEMA)‐grafted chains existed not only on the top surface, but also inside the pores and on the back. Atomic force microscopy (AFM) and nitrogen adsorption analysis confirmed that the grafted chains collapsed in air, and decreased the surface roughness, surface area, and pore size of the grafted membranes. Alkali‐responsive properties of the poly(DMAEMA)‐grafted EVAL membrane (i.e., contact angle, permeability, and selectivity) were observed in the pH range of 9–10. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41775.     

Modification of polysulfone membranes via surface‐initiated atom transfer radical polymerization and their antifouling properties

Surface‐initiated atom transfer radical polymerization (ATRP) was used to tailor the functionality of polysulfone (PSF) membranes. A simple one‐step method for the chloromethylation of PSF under mild conditions was used to introduce surface benzyl chloride groups as active ATRP initiators. Covalently tethered hydrophilic polymer brushes of poly(ethylene glycol)monomethacrylate and 2‐hydroxyethyl methacrylate and their block copolymer brushes were prepared via surface‐initiated ATRP from the chloromethylated PSF surfaces. A kinetic study revealed that the chain growth from the membranes was consistent with a controlled process. X‐ray photoelectron spectroscopy was used to characterize the surface‐modified membrane after each modification stage. Protein adsorption experiments revealed substantial antifouling properties of the grafted PSF membranes in comparison with the those of the pristine PSF surface. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Temperature‐sensitive membranes prepared by the plasma‐induced graft polymerization of N‐Isopropylacrylamide into porous polyethylene membranes

A temperature‐responsive polymer, poly(N‐isopropylacrylamide) (PNIPAAm), was grafted onto porous polyethylene membranes by a plasma‐induced graft polymerization technique. A wide range of grafting was achieved through variations in the grafting conditions, including the postpolymerization temperature, time, monomer concentration, and graft‐reaction medium. The active species induced by plasma treatment was proven to be long‐living via a postpolymerization time of 95 h. Different solvent compositions, that is, water, methanol, benzene, and water/methanol, were used as reaction media, and water showed a much higher polymerization rate than the organic solvents. Based on the hydrophilicity of the active species, a mechanism explaining the solvent effect in plasma‐induced graft polymerization was examined. Characterizations by scanning electron microscopy, X‐ray photoelectron spectroscopy (XPS), and micro Fourier transform infrared showed that the grafted polymers were located on both the outer surface and inside pores of the membranes. The XPS analysis also confirmed that the polar amide groups tended to distribute more outward when grafted PNIPAAm was in its expanding state than when it was in its shrinking state. Water permeation experiments showed that the permeability of the grafted membranes varied dramatically with a slight temperature change in the vicinity of the lower critical solution temperature (LCST) of PNIPAAm. The effective pore radii of the grafted membranes above and below the LCST could be depicted by Hagen‐Poiseuille's law. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3180–3187, 2003     

Hydrophilic modification of P(VDF-co-CTFE) porous membranes

This paper describes fabrication of a poly(vinylidene difluoride-co-chlorotrifluoroethylene) (P(VDF-co-CTFE)) porous membrane via non-solvent induced phase inversion and subsequent hydrophilic modification using high efficient surface initiated atom transfer radical polymerization (ATRP). The effect of viscosities of casting solutions on microstructures of the P(VDF-co-CTFE) membrane was investigated. The surface chemistry, thermal stability, morphological structure, and hydrophilicity of the modified membranes were evaluated by Fourier Transform Infrared Attenuated Total Reflection (FTIR-ATR), Differential Scanning Calorimeter (DSC), Scanning Electron Microscope (SEM), and contact angle measurements, respectively. The degree of grafting and the degree of swelling were measured to analyze the effect of polymerization time on the wettability. The mechanical strength of the membranes after modification was also investigated. The permeability and fouling resistance were evaluated according to pure water flux and protein solution filtration measurements. The results demonstrate that the hydrophobic P(VDF-co-CTFE) membrane can be feasibly modified by immobilization of hydrophilic poly(ethylene glycol) methyl ether methacrylate (PEGMA) brushes via surface initiated ATRP.     

Cotton‐fabric‐grafted poly(N‐isopropyl acrylamide) initiated by ammonium peroxydisulfate

In this article, we report that thermoresponsive poly(N‐isopropyl acrylamide) (PNIPAAm) was successfully grafted onto a cotton fabric (CF) surface by free‐radical solution grafting polymerization; we obtained a thermoresponsive CF‐grafted PNIPAAm. This reaction system only contained four constituents: the monomer, solvent, initiator, and CFs. Ammonium peroxydisulfate was chosen as the initiator, and water was chosen as the solvent. A series of initiator concentrations and grafting polymerization temperatures were used in the experiments, and their effects on the grafting ratio (G) were also studied. Also, the effects of the G of CF‐g‐PNIPAAm on their corresponding thermoresponses was studied further. The structure of CF‐g‐PNIPAAm was characterized by Fourier transform infrared spectroscopy–attenuated total reflectance analysis and scanning electron microscopy analysis. The G of CF‐g‐PNIPAAm was measured by a gravimetric method. The thermoresponse of CF‐g‐PNIPAAm was characterized by modulated differential scanning calorimetry, water contact angle measurements, and wetting time measurements. The experiments manifested the following results: (1) the initiator concentration and grafting polymerization temperature both influenced G, (2) the grafted PNIPAAm covered the CF surface, (3) the CF‐g‐PNIPAAm showed thermoresponsive hydrophilicity/hydrophobicity, and (4) a relationship existed between the thermoresponse of CF‐g‐PNIPAAm and the corresponding G. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41193.