乙烯酮(双乙烯酮)下游产品废水的治理技术

乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。     

水泥水化热测定方法综述

水泥水化热是中、低热水泥和核电工程用水泥的一项关键的技术指标。全球范围内测定水泥水化热的方法有溶解法、直接法/半绝热法、等温传导量热法三种。本文总结了中、美、欧相关方法标准,对其测试原理、仪器设备、试验过程等方面进行了比对,并对其在领域的应用做了简单的概括。     

Stability of granules of solid solutions of poly-pehnyleneterephthalamide

Conclusions Studies of starting solutions of PPTA in sulfuric acid and of granules obtained under pressrue at low temperature, and of granules stored in a hermetic package, have been carried out by the methods of differential thermal analysis, turbidity spectrum and viscometry.On granulation of a solidified PPTA solution, short-term storage of the granules in a hermetic package, or short contanct of the granulated mass with air, no appreciable change in melting point or of the intrinsic viscosity of the system takes place.Long storage of a granulated solution, even in hermetic packages, can lead to a considerable decrease in the melting point of the crystal solvates, caused by an increase in defectiveness of crystal structure under the effect of moisture.Translated from Khimicheskie Volokna, No. 3, pp. 25–26, May–June, 1986.     

气化给煤系统故障分析

气化给煤装置自投运以来,出现了气化煤仓堵煤、称重给煤机输送皮带因跑偏而损伤以及清扫装置故障频繁等问题,多次造成气化系统减负荷运行。通过对出现的各种问题进行分析,找到了产生这些问题的原因,并有针对性地采用配煤和改进清扫链等措施,使出现的问题得到了极大的改善。     

Theory of thermohydrodynamic instability of the front of filtration combustion of gases

Based on the filtration equations with account of heat transfer in the heating region, the problem of instability of small perturbations of the wave front of filtration combustion of a gas is solved. Expressions for the growth decrement and critical transverse size of a perturbation are obtained. The problem of the wave-front stability is solved with account of the macroscopic redistribution of filtration in the system. The solution includes macroscopic characteristics such as the transverse size, the width of the high-temperature zone, etc. A method is proposed for taking into account the influence of the characteristics of the system on the evolution of perturbations. It is shown that small deformation perturbations of the front always increase to a certain amplitude; their subsequent development— continuation of their growth or stabilization—is determined by the characteristics of the system. Translated fromFizika Goreniya i Vzryva, Vol. 35, No. 5, pp. 3–5, September–October 1999.     

Coefficient of optimality of linings of heating units

The efficiency of the use of various refractories is estimated by an objective factor, namely, the coefficient of optimality of linings of heating units.Translated from Ogneupory, No. 12, pp. 26 – 27, December, 1994.     

Effect of degree of deacetylation of chitin on the properties of chitin crystallites

In the present article, chitin from crab shell was systematically deacetylated using a NaOH treatment with control of the reaction time. The degree of deacetylation, monitored using solid-state NMR, revealed that the reaction was pseudo-first order. Based on this, swollen and NaOH-saturated particles are proposed as the reaction system. The weight loss of the partially saponified and neutralized samples after HCl hydrolysis increased linearly with the degree of deacetylation. The crystallinity of the samples was found to increase after acid hydrolysis. According to conductimetric titration, the surface charge density of the crystallites, after acid hydrolysis, was found to increase with base treatment time. The effect of surface charge on the formation of a chiral nematic phase, due to the rodlike nature of the crystallites, was explored. These results show that because the contribution of charged particles to the ionic strength was significant the double layer compression was affected, especially since the surface charge density was close to the Manning limit. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:373–380, 1997     

Analysis of products of high-temperature pyrolysis of various hydrocarbons

Ethane, ethylene, acetylene, propane and neopentane have been pyrolyzed at 1173 K, and methane at 1372 K in a flow system, and the volatile pyrolysis products analyzed. Eleven aromatic hydrocarbons, containing 14 or fewer carbon atoms, accounted for 98 + % of the liquid products recovered in each case. Benzene was the main product, followed by naphthalene. No compounds with branched chains or multiple substituents were present, and compounds containing even numbers of carbons comprised 93–99% of each mixture. Acetylene was a major component of the gaseous effluent from each of the initial hydrocarbons. The effect of temperature on the composition of the gaseous effluent during pyrolysis of methane, ethane and ethylene was determined. Carbon film deposition from methane commenced at about 1273 K; from ethane at 1015 K and from ethylene at 1100 K, in each instance coinciding with the appearance of acetylene in the effluent. As the temperature was raised, at first the increase in the rate of carbon deposition closely followed the increase in the concentration of acetylene in the effluent. It is proposed that acetylene may be a common factor in the pyrolysis of aliphatic hydrocarbons, perhaps acting as the precursor of both surface carbon and aromatic hydrocarbons by a process of head-to-tail linkage of two-carbon units at active surface sites to form chains that then undergo dehydrogenation to carbon or cyclization and desorption as aromatic species.     

浅谈安全中的“以人为本”

在安全生产系统中,人的素质是占主导地位的,人的行为贯穿生产过程的每一个环节。企业安全要以人为核心,树立人本观念。安全管理必须重视人的因素,提高人的素质,从精神上、物质上关心人尊重人,以有效的手段约束和激励人,加大安全投入、落实有效措施,保障个人的利益,使大家找到归属感,保护员工身体健康和生命安全,最终形成安全管理＂命运共同体＂,推动企业发展和提高。     

Effect of Microstructure on Rate of Machining of Ceramics

The effect of microstructure on the machinability of a variety of ceramics was studied. The machining difficulty, i.e. the inverse of sawing or grinding rate at constant force, increased with decreasing porosity and grain size. For materials with nonuniform distributions of grain size or porosity, machining rates were controlled by the smaller grains and the least porous regions. The grain-size dependence of the machining difficulty was generally greater for harder materials. The effect of porosity on machining difficulty generally followed the same trend as its effect on other mechanical properties. The results obtained were interpreted in terms of the Petch relation, which provided a rationale for the occurrence of flaw sizes independent of grain size. The results also indicate that theories of the machinability of ceramics must include the effects of compressive strength and, especially, hardness.