Effect of crack shape,inclination angle,and friction coefficient in crack surface contact problems

In rolling/sliding contact fatigue, it is known that the crack propagates at a characteristic angle =15–30 deg to the surface. To analyze the mechanism, however, the body force method has been widely used assuming 3D crack models for =45–90. In this study, therefore, the unknown body force densities are newly approximated by using fundamental density functions and polynomials. Then, a semi-elliptical crack model is analyzed for =15–90 under compressive residual stresses and Hertzian contact loads. The stress intensity factors K _II, K _III are calculated with varying the crack shape b/a, inclination crack angle , and crack face friction coefficient . The calculations show that the present method is useful for the analysis for =15–30 deg with high accuracy. It is seen that the K _II-values when b/a0 are larger than the ones when b/a=1 by 0–24% for both under compressive residual stress and Hertzian contact load. Regarding the maximum K _II values under Hertzian contact load, the results of =15 deg are smaller than the ones of =45 deg by 23–34%. Regarding the amplitude of (K _{II max}–K _{II min}), the results of =15 deg are smaller than the ones of =45 deg by 4–24%. With increasing the value of friction coefficient for crack faces the value of K _II decreases significantly. When the crack is short and the inclination angle is small, the value of friction coefficient f for Hertzian contact load largely affect the K _II value.     

An exact calculation of Price's law for the law of Lotka

Price's law asserts — in its simpliest version — that authors produce half of the papers made by the total ofN authors. More generally: the topN (0<<1) authors produce a fraction (0<<1) of the papers made by the total ofN authors and the Price's law says that . In this paper — using Lotka's law — we prove a mathematical relationship of in function of and the parameter (the mean number of papers per author) and investigate when . More-over our reasoning uses the theory of the 80/20 rule as developed in: L. EGGHE, On the 80/20-rule,Scientometrics, 10 (1986) 55–68, thereby also showing the relation betwwen the 80/20-rules (being an arithmetical form of measuring elitarism) and Price's law (being a geometric form of measuring elitarism).     

Structure of unidimensional temperature stresses

Using the structural approach, the temperature stresses are examined in a semiinfinite rod, insulated on the lateral faces and rigidly fixed at the end. A comparative analysis is made for three heat-transfer models.Notation k(t) heat flux relaxation function - (t) internal energy relaxation function - T rod temperature - ambient temperature - t time - x coordinate along the rod - _xx(x, t) stress - u(x, t) displacement - (x, t) deformation - c₀=(E/)^1/2 speed of sound in the rod under isothermal conditions - E elasticity modulus - density of the material - _t coefficient of thermal expansion - thermal-conductivity coefficient - a thermal-diffusivity coefficient - b thermal-activity coefficient - c_q=(a/_r)^1/2 velocity of heat propagation - _r heat flux relaxation time - (t) unique Heaviside function Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 33, No. 5, pp. 912–921, November, 1977.     

A scaled equation of state for real fluids in the critical region

A scaled equation of state is proposed for real fluids in the critical region which incorporates asymmetry with respect to the critical isochore. In the range of reduced densities 0.65(/ _c)1.4 and for reduced temperatures (T/T _c)1.2, the equation represents P-V-T data for steam within the experimental accuracy.     

The interdependence between the incidence angles associated with quasi-stable intersections during ion erosion

A general discussion, which is valid for any angular dependence of sputtering yieldS=S(), concerning the interdependence between the incidence angles _e and ₀, associated with quasi-stable intersections during ion erosion, is given. The object was firstly to establish the location of _e roots as a function of ₀ and secondly to identify the stationary points and general trend for the complex dependence _e= _e( ₀). The results obtained are applied to a quasi-stability analysis of some specific surface features during ion erosion. Various possible types of quasi-stable intersections (surface-surface, plane-surface, plane-plane) are reviewed from the point of view of their evolution caused by ion bombardment.     

Heat conduction in a multilayer composite wedge

A new method for analytically solving a problem of steady-state heat conduction for multilayer composite wedge-shaped bodies is suggested based on a generalization of the integral Mellin transform.Notation T temperature - _rr, thermal conductivity coefficients - thickness of composite material layers (1) - N₁(), N ₂ ⁽¹⁾ (), N ₂ ⁽²⁾ () auxiliary local functions from the rapid variable =r/ - m(r, p) auxiliary function entering the core of the generalized integral Mellin transform - ₀ half of the wedge aperture angle Moscow Institute of Chemical Engineering. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 64, No. 4, pp. 487–491, April, 1993.     

Critical dynamics of a sheared micellar solution

We have investigated the dynamic behavior of a nonionic micellar solution of tetra-ethylene glycoln-decylether (C₁₀ E₄) in water near its critical point in the presence of shear. The non-Newtonian behavior of the viscosity can be represented by * = [ 1 +a(S₄)=]², where* is the viscosity in the absence of shear,S is the shear rate. ₄ is the lifetime of the critical Iluctuations,a is a system-dependent constant, and = 0.02 In addition, we have found that, before attaining a steady state, the sheared mixture undergoing phase separation shows significant shear-dependent rheological effects due to the presence of concentration domains.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24. 1994, Boulder, Colorado, U.S.A.     

The critical curve in an antiferromagnetic superconductor with nonmagnetic impurities

The critical curve of a transition of the second kind in an antiferromagnetic superconductor (AFS) with nonmagnetic impurities has been studied. The AFS is described by using the mean-field model given by Nass, Levin, and Grest and assuming a one-dimensional electron band. We find that the points on the critical curve satisfy the thermodynamic stability condition for 0₁/₀5.04 and 0.49H_Q/₀1.64.Here ₁ is the inverse lifetime of a conduction electron for nonmagnetic impurity scattering,H _Q is the antiferromagnetic molecular field, ₀ is the zero-temperature order parameter of a superconductor in the absence ofH _Q and impurities. Further, ₁ and H_Q denote the values of these quantities for points on the critical curve. For ₁/₀>5.04 and H_Q/₀>1.64, the phase transition from the superconducting to the normal state is always of the second kind. Some thermal properties of the system near the critical curve have also been investigated and we find that these depends dramatically on the impurity concentration.     

Low-temperature specific heat of high-purity calcium

Low-temperature specific heat of high-purity calcium has been measured with an adiabatic calorimeter with a mechanical heat switch to avoid helium exchange gas errors, over the temperature range 1.1–4.2 K. The values obtained for the electronic coefficient of specific heat and the Debye temperature _D are =1.99±0.05 mJ/moleK ² and _D=250±4K.     

Thermodynamic properties of antiferromagnetic superconductors containing nonmagnetic,magnetic, and spin-orbit impurities

Effects of all types of impurities (nonmagnetic, magnetic, and spin-orbit) on an antiferromagnetic superconductor (AFSC) have been investigated by studying the transition temperatureT _c and the specific heat jump. We have assumed a one-dimensional electron band. The impurity scattering is treated within the self-consistent Born approximation. We find that: (a) the molecular fieldH _Q and the magnetic impurities depress superconductivity of AFSC and their pair-breaking effect is additive; (b) the effect of spin-orbit impurities is the same as that of nonmagnetic impurities—these enhance superconductivity by screening the molecular field; and (c) in the extreme dirty limit, the AFSC is described in terms of an effective pair-breaking parameter given by 1/_eff=1/₂+H _Q ² where 1/=1/₁+2/3_so(1/₁, 1/₂, and 1/_so, respectively, are the scattering rates from nonmagnetic, magnetic and spin-orbit impurities).     

Axisymmetric postbuckling of orthotropic thick annular plates

Summary This study deals with the geometrically nonlinear postbuckling response of cylindrically orthotropic thick annular plates subjected to inplane radial compressive load at the outer edge. Clamped and simply supported plates with a free hole and a plugged hole have been considered. Governing differential equations are expressed in terms of transverse displacementw, shear rotation and stress function . Polynomial expansions are employed for these three field variables and the orthogonal point collocation method has been used to obtain the discretised equations. Buckling loads have been determined by solving a linear eigen-value problem using the method of inverse iterations. Postbuckling loads for different central deflections have been obtained by solving the nonlinear differential equations. The effect of thickness ratio, orthotropic parameter, annular ratio and the edge conditions has been investigated. The effect of shear deformation on the buckling loads increases with the orthotropic parameter and the thickness-to-radius ratio.Notations a, b, h Outer and inner radii and thickness of the plate - E ,E ,v ,v Young's moduli, Poisson's ratios - Orthotropic parameter:E /E _r - G _rz /E _r - u ^*,u ₀ ^* Radial displacement, radial displacement at mid plane - r, , z Cylindrical polar coordinates - , ^* Strains and stresses - w ^*,w ,w Transverse displacement, shear rotation and stress function - w, , Dimensionless deflection, shear rotation and stress function - N _r ,N ,Q _r Inplane stress resultants and transverse shear - M _r ,M Moment resultants - k ² Shear correction factor - , (r–b)/(a–b), b/(a–b) - a/h - _r ^b , ^m Radial bending stress, circumferential membrane stress - N, _i Number and radii of collocation points - Eigenvalue for buckling With 6 Figures     

Microstructure of a rapidly solidified 65Al-20Cu-15Fe (at. %) alloy

The microstructure of rapidly solidified 65Al-20Cu-15Fe (at. %) powders was investigated by analytical transmission electron microscopy. It was found that segregation in the powder particle occurred during solidification. The major phase present in the powder particles was the icosahedral quasicrystalline l-phase, which was determined to have space group . Two other crystalline phases, -AlCu₃ and -Al₁₃Fe₄, coexisted with the l-phase. The l-phase was revealed by convergent beam electron diffraction to have three-dimensional quasiperiodicity ( = 1.618) which is different from quasicrystals in the other systems. The compositions of the three phases have been analysed by energy dispersive X-ray analysis. The l-phase in this system could be approximately described as Al₅CuFe. The composition of the -Al₁₃Fe₄ was very close to the equilibrium condition while -AlCu₃ was far from stoichiometry. An orientation relationship between -AlCu₃ and -Al₁₃Fe₄ was found as follows: [110][010] [111][001]     

On the nucleation ofθ′ and T1 on Al3Zr precipitates in Al-Li-Cu-Zr alloys

Two quaternary Al-Li-Cu-Zr alloys have been investigated using electron microscopy. Ageing at 190° C resulted in the nucleation of precipitates on the Al₃Zr/matrix interface in addition to heterogeneous nucleation on matrix dislocations. In the majority of cases, the broad, coherent face of the plans ms in contact with the Al₃Zr precipitates. Similar evidence showed that nucleation of T₁ precipitates occurred on the Al₃Zr, but to a lesser extent than. Solid-solid nucleation theory has been used to account for the Al₃Zr acting as a nucleation substrate.     

In-Plane Fourfold Symmetry of the Upper Critical Field Observed in La(Sr)214 Single Crystals

In order to establish the existence of in-plane anisotropy of the upper critical field H _c2 (), the out-of-plane resistivity _c measurements were performed on La(Sr)214 single crystals with rectangular and cylindrical shape under rotating magnetic field applied within the ab-plane. Although observed _c shows non-sinusoidal twofold symmetry, clear fourfold symmetry was obtained after subtracting twofold sinusoidal component in _c which is due to the unavoidable misalignment of the magnetic field with respect to ab-plane. H _c2 () is estimated from the extracted fourfold component of _c with the flux flow theory. Angular dependence of H _c2 () was well fitted by cos(4). Since the fourfold component of H _c2 () was largest at = n/2, which corresponds to the a-axis direction, the present results strongly suggest the type symmetry in La(Sr)214. In addition, the difference in fourfold component of H _c2 at = n/2 and n/2+/4 was found to increase with decreasing temperature.     

Strength of the pyroceram So115M under lengthy static loading

The article presents the results of long-time strength tests of the casting pyroceram SO115M at room temperature by the method of three-point bending. We obtained the power dependence of the time to failure _f on the applied load : _f ^–11.7.Translated from Problemy Prochnosti, No. 1, pp. 102–104, January, 1996.     

Anisotropic spin diffusion and multiple spin echoes in3He-4He solutions

We propose a ₁-t₁-₂ pulse-NMR experiment to detect the spin-diffusion anisotropy, =D-D, in degenerate spin-polarized³He-⁴He mixtures, where D and dare the transverse and longitudinal spin diffusion coefficients. In such an experiment the nonlinearity of the dynamics produces multiple spin echoes (MSE). At the ³He concentration x₃ 4% the spinrotation parameter vanishes (M 0), so that the nonlinearity of the equations of motion is entirely due to the anisotropy. In this situation, detection of MSE amounts to observation of D. For slight anisotropy, i.e. D/D 0.25, we use a perturbation scheme similiar to that developed by Einzel et al. (in that case, for small M and small demagnetizing field) to calculate the second and third echo heights. For larger anisotropy we numerically calculate the echo heights. We find that for D/D = 0.5 the heights are 2 % of the first echo, and should be detectable. The (₁, ₂) tip-angle dependence of the D echoes is different from that of the M and demagnetization echoes, and furthermore, they occur at right angles to these echoes (in spin space). Thus, even when small spin-rotation and demagnetization effects are present, the ₁-t₁-₂ experiment provides a sensitive means of detecting the anisotropy.     

On the dispersion of gases under the action of the medium

Some general regularities of dispersion of a gas emerging from a nozzle submerged in a liquid are considered. A condition for establishment of the so-called maximum dispersion state is formulated.Notation ₀ coefficient of surface tension at the liquidgas boundary - contact angle of wetting of the nozzle material surface by the liquid - p_at atmospheric pressure - p air pressure - density of the liquid - g gravitational acceleration - h height of the liquid column - ₁, and _g dynamic viscosity coefficients of the liquid and gas, respectively - R and r radii of the bubble and nozzle, respectively - Q and F dimensionless criteria - , , , , and undetermined coefficients - ratio of the circumference of a circle to its diameter     

Thermal stresses in a thin circular disc of orthotropic material due to an instantaneous point heat source

Summary In this paper, we have analysed the transient plane thermal stress problem of a circular disc of orthotropic material with instantaneous point heat source. The variation of with time along different radius vectors is exhibited graphically and compared with that of the isotropic case.

---

Wärmespannungen in einer dünnen Kreisscheibe aus orthotropem Material zufolge einer punktförmigen instantanen Wärmequelle

Zusammenfassung In dieser Arbeit wurde das instationäre ebene Wärmespannungsproblem einer Kreisscheibe aus orthotropem Material zufolge einer punktförmigen instantanen Wärmequelle untersucht. Die Veränderung von über die Zeit für verschiedene Radien ist graphisch dargestellt und wird mit dem isotropen Fall verglichen.

---

Nomenclature r, polar coordinates - T temperature rise - ² ratio of conductivities - ² thermal diffusivity in -direction - J _n Bessel function ofn-th order - t time - p introduced in equation (2) - h heat transfer coefficient - a radius of circular disc - f(r, ) temperature distribution at initial state - r ₀, ₀ a point on the disc - T ₀ strength of point heat source - Dirac delta function - F stress function in two dimensions - ₁, ₂ coefficient of thermal expansion - a ₁₁,a ₁₂,a ₂₂,a ₆₆ elastic constants With 9 Figures     

Precipitation hardening in an Al-Cu-Si-Mg alloy at 130 to 220° C

The variation of the hardness of a complex Al alloy, of the L70 type, (Al 4% Cu 0.8% Si 0.8% Mg 0.7% Mn 0.5% Fe) with ageing time at 130, 160 and 190° C was measured and correlated with transmission electron microscope observations of preciptate morphology. It was established that the peak hardness, after both 160 and 190° C ageing, was associated with coherent precipitate particles with a diameter of 700 Å and the subsequent limited overageing at these temperatures was controlled by the slow growth of particles. Measurements of particle coarsening at 220° C suggested that the process occurred by Ostwald ripening. In contrast, ageing at 130° C gave a series of hardness—time plateaus, which were ascribed to the sequential precipitation of zones,' and precipitates.     

Nonlinear axisymmetric response of orthotropic thin truncated conical and spherical caps

Summary An approximate analytical solution of the large deflection axisymmetric response of polar orthotropic thin truncated conical and spherical shallow caps is presented. Donnell type equations are employed. The deflection is approximated by a one term mode shape satisfying the boundary conditions. The Galerkin's method is used to get the governing equation for the deflection at the hole. Nonlinear free vibration response and the response under uniformly distributed static and step function loads are obtained. The effect of various parameters is investigated.Notations A, A ^* Inward and outward amplitudes - a, b, h Base radius, inner radius and thickness of the cap - D M h ³/[12(–v ² )] - E ,E Young's moduli - H ^*,H Apex height, dimensionless apex heght:H ^*/h - N _, Stress resultants - p ^1/2 - q Uniformly distributed load - Q,Q₀ Dimensionless load: , dimensionless step load - Q, Q ₀ Dimensionless load: , step load - t, Time, dimensionless time: t - T _A Ratio of nonlinear periodT for inward amplitudeA and the linear periodT _L - w ^* Normal displacement at middle surface - w Dimensionless displacement:w ^*/h - ₁ Linear parameter of static response - Orthotropic Parameter:E /E - Mass density - ₂,₃ Quadratic and cubic nonlinearity parameters - b/a - v ,v Poisson's ratios - Dimensionless radius:r/a - ^*, Stress function, dimensionless stress function: - ₀ ^* ,₀ Linnear frequency, dimensionless frequency: With 7 Figures