A High‐Potential Anion‐Insertion Carbon Cathode for Aqueous Zinc Dual‐Ion Battery

Aqueous dual‐ion batteries (DIBs) are promising for large‐scale energy storage due to low cost and inherent safety. However, DIBs are limited by low capacity and poor cycling of cathode materials and the challenge of electrolyte decomposition. In this study, a new cathode material of nitrogen‐doped microcrystalline graphene‐like carbon is investigated in a water‐in‐salt electrolyte of 30 m ZnCl₂, where this carbon cathode stores anions reversibly via both electrical double layer adsorption and ion insertion. The (de)insertion of anions in carbon lattice delivers a high‐potential plateau at 1.85 V versus Zn²⁺/Zn, contributing nearly 1/3 of the capacity of 134 mAh g^?1 and half of the stored energy. This study shows that both the unique carbon structure and concentrated ZnCl₂ electrolyte play critical roles in allowing anion storage in carbon cathode for this aqueous DIB.     

Ultrafast Discharge/Charge Rate and Robust Cycle Life for High‐Performance Energy Storage Using Ultrafine Nanocrystals on the Binder‐Free Porous Graphene Foam

A hierarchical architecture fabricated by integrating ultrafine titanium dioxide (TiO₂) nanocrystals with the binder‐free macroporous graphene (PG) network foam for high‐performance energy storage is demonstrated, where mesoporous open channels connected to the PG facilitate rapid ionic transfer during the Li‐ion insertion/extraction process. Moreover, the binder‐free conductive PG network in direct contact with a current collector provides ultrafast electronic transfer. This structure leads to unprecedented cycle stability, with the capacity preserved with nearly 100% Coulombic efficiency over 10 000 Li‐ion insertion/extraction cycles. Moreover, it is proven to be very stable while cycling 10 to 100‐fold longer compared to typical electrode structures for batteries. This facilitates ultrafast charge/discharge rate capability even at a high current rate giving a very short charge/discharge time of 40 s. Density functional theory calculations also clarify that Li ions migrate into the TiO₂–PG interface then stabilizing its binder‐free interface and that the Li ion diffusion occurs via a concerted mechanism, thus resulting in the ultrafast discharge/charge rate capability of the Li ions into ultrafine nanocrystals.     

Carbon Nanotubes Rooted in Porous Ternary Metal Sulfide@N/S‐Doped Carbon Dodecahedron: Bimetal‐Organic‐Frameworks Derivation and Electrochemical Application for High‐Capacity and Long‐Life Lithium‐Ion Batteries

Lithium ion battery is the predominant power source for portable electronic devices, electrical vehicles, and back‐up electricity storage units for clean and renewable energies. High‐capacity and long‐life electrode materials are essential for the next‐generation Li‐ion battery with high energy density. Here bimetal‐organic‐frameworks synthesis of Co_0.4Zn_0.19S@N and S codoped carbon dodecahedron is shown with rooted carbon nanotubes (Co‐Zn‐S@N‐S‐C‐CNT) for high‐performance Li‐ion battery application. Benefiting from the synergetic effect of two metal sulfide species for Li‐storage at different voltages, mesoporous dodecahedron structure, N and S codoped carbon overlayer and deep‐rooted CNTs network, the product exhibits a larger‐than‐theoretical reversible Li‐storage capacity of 941 mAh g^?1 after 250 cycles at 100 mA g^?1 and excellent high‐rate capability (734, 591, 505 mAh g^?1 after 500 cycles at large current densities of 1, 2, and 5 A g^?1 , respectively).     

Unraveling Metal Oxide Role in Exfoliating Graphite: New Strategy to Construct High‐Performance Graphene‐Modified SiOx‐Based Anode for Lithium‐Ion Batteries

Exfoliating graphite to graphene has attracted great attention due to the fantastic properties of graphene available for designing graphene‐based materials or devices. Besides the classic solution method, herein a unique role of TiO₂ in exfoliating graphite to be graphene layers effectively is reported. As a paradigm, this discovered effect of TiO₂ is significant for preparing high‐performance graphene‐modified SiO_x‐based anode in lithium‐ion batteries (LIBs), in which the graphite is in situ exfoliated mechanically by TiO₂ to be multilayered graphene (i.e., MLG) and then the SiO_x is wrapped by the MLG to construct a SiO_x/TiO₂@MLG. In this case, an extremely high capacity of 1484 mAh g^?1, long lifespan over 1200 cycles at 2 A g^?1, as well as good performance in full LIBs (vs nickel‐rich cathode) are demonstrated. It is confirmed that the MLG can enhance electric conductivity, mitigate electrolyte decomposition, and alleviate volume effect of the SiO_x effectively. This result is hard to be achieved using other kinds of metal oxide besides TiO₂. It is hoped that the SiO_x/TiO₂@MLG is practical for pursuing LIBs with an energy density beyond 300 Wh kg^?1. In addition, it is believed the ingenious strategy is applicable for designing more functional materials with greater capabilities.     

Iron Oxide Nanoparticle and Graphene Nanoribbon Composite as an Anode Material for High‐Performance Li‐Ion Batteries

A composite material made of graphene nanoribbons and iron oxide nanoparticles provides a remarkable route to lithium‐ion battery anode with high specific capacity and cycle stability. At a rate of 100 mA/g, the material exhibits a high discharge capacity of ~910 mAh/g after 134 cycles, which is >90% of the theoretical li‐ion storage capacity of iron oxide. Carbon black, carbon nanotubes, and graphene flakes have been employed by researchers to achieve conductivity and stability in lithium‐ion electrode materials. Herein, the use of graphene nanoribbons as a conductive platform on which iron oxide nanoparticles are formed combines the advantages of long carbon nanotubes and flat graphene surfaces. The high capacity over prolonged cycling achieved is due to the synergy between an electrically percolating networks of conductive graphene nanoribbons and the high lithium‐ion storage capability of iron oxide nanoparticles.     

MoS2/Graphene Composite Anodes with Enhanced Performance for Sodium‐Ion Batteries: The Role of the Two‐Dimensional Heterointerface

Graphene has been widely used as conformal nanobuilding blocks to improve the electrochemical performance of layered metal sulfides (MoS₂, WS₂, SnS, and SnS₂) as anode materials for sodium‐ion batteries. However, it still lacks in‐depth understanding of the synergistic effect between these layered sulfides and graphene, which contributes to the enhanced electroactivity for sodium‐ion batteries. Here, MoS₂/reduced graphene oxide (RGO) nanocomposites with intimate two‐dimensional heterointerfaces are prepared by a facile one‐pot hydrothermal method. The heterointerfacial area can be effectively tuned by changing the ratio of MoS₂ to RGO. When used as anode materials for sodium‐ion batteries, the synergistic effect contributing to the enhanced reversible capacity of MoS₂/RGO nanocomposites is closely related with the heterointerfacial area. The computational results demonstrate that Na prefers to be adsorbed on MoS₂ in the MoS₂/RGO heterostructure rather than intercalate into the MoS₂/RGO heterointerface. Interestingly, the MoS₂/RGO heterointerfaces can significantly increase the electronic conductivity of MoS₂, store more Na ions, while maintaining the high diffusion mobility of Na atoms on MoS₂ surface and high electron transfer efficiency from Na to MoS₂. It is expected that the efforts to establish the correlation between the two‐dimensional heterointerface and the electrochemical sodium‐ion storage performance offer fundamental understanding for the rational design of layered metal sulfides/graphene composites as high‐performance electrode materials for sodium‐ion batteries.     

Designing 3D Biomorphic Nitrogen‐Doped MoSe2/Graphene Composites toward High‐Performance Potassium‐Ion Capacitors

Potassium‐ion hybrid capacitors (KICs) reconciling the advantages of batteries and supercapacitors have stimulated growing attention for practical energy storage because of the high abundance and low cost of potassium sources. Nevertheless, daunting challenge remains for developing high‐performance potassium accommodation materials due to the large radius of potassium ions. Molybdenum diselenide (MoSe₂) has recently been recognized as a promising anode material for potassium‐ion batteries, achieving high capacity and favorable cycling stability. However, KICs based on MoSe₂ are scarcely demonstrated by far. Herein, a diatomite‐templated synthetic strategy is devised to fabricate nitrogen‐doped MoSe₂/graphene (N‐MoSe₂/G) composites with favorable pseudocapacitive potassium storage targeting a superior anode material for KICs. Benefiting from the unique biomorphic structure, high electron/K‐ion conductivity, enriched active sites, and the conspicuous pseudocapacitive effect of N‐MoSe₂/G, thus‐derived KIC full‐cell manifests high energy/power densities (maximum 119 Wh kg^?1/7212 W kg^?1), outperforming those of recently reported KIC counterparts. Furthermore, the potassium storage mechanism of N‐MoSe₂/G composite is systematically explored with the aid of first‐principles calculations in combination of in situ X‐ray diffraction and ex situ Raman spectroscopy/transmission electron microscopy/X‐ray photoelectron spectroscopy.     

Enhanced Ionic/Electronic Transport in Nano‐TiO2/Sheared CNT Composite Electrode for Na+ Insertion‐based Hybrid Ion‐Capacitors

Ion‐insertion capacitors show promise to bridge the gap between supercapacitors of high power densities and batteries of high energy densities. While research efforts have primarily focused on Li⁺‐based capacitors (LICs), Na⁺‐based capacitors (SICs) are theoretically cheaper and more sustainable. Owing to the larger size of Na⁺ compared to Li⁺, finding high‐rate anode materials for SICs has been challenging. Herein, an SIC anode architecture is reported consisting of TiO₂ nanoparticles anchored on a sheared‐carbon nanotubes backbone (TiO₂/SCNT). The SCNT architecture provides advantages over other carbon architectures commonly used, such as reduced graphene oxide and CNT. In a half‐cell, the TiO₂/SCNT electrode shows a capacity of 267 mAh g^?1 at a 1 C charge/discharge rate and a capacity of 136 mAh g^?1 at 10 C while maintaining 87% of initial capacity over 1000 cycles. When combined with activated carbon (AC) in a full cell, an energy density and power density of 54.9 Wh kg^?1 and 1410 W kg^?1, respectively, are achieved while retaining a 90% capacity retention over 5000 cycles. The favorable rate capability, energy and power density, and durability of the electrode is attributed to the enhanced electronic and Na⁺ conductivity of the TiO₂/SCNT architecture.     

Watermelon‐Like Structured SiOx–TiO2@C Nanocomposite as a High‐Performance Lithium‐Ion Battery Anode

A unique watermelon‐like structured SiO_x–TiO₂@C nanocomposite is synthesized by a scalable sol–gel method combined with carbon coating process. Ultrafine TiO₂ nanocrystals are uniformly embedded inside SiO_x particles, forming SiO_x–TiO₂ dual‐phase cores, which are coated with outer carbon shells. The incorporation of TiO₂ component can effectively enhance the electronic and lithium ionic conductivities inside the SiO_x particles, release the structure stress caused by alloying/dealloying of Si component and maximize the capacity utilization by modifying the Si–O bond feature and decreasing the O/Si ratio (x‐value). The synergetic combination of these advantages enables the synthesized SiO_x–TiO₂@C nanocomposite to have excellent electrochemical performances, including high specific capacity, excellent rate capability, and stable long‐term cycleability. A stable specific capacity of ≈910 mAh g^?1 is achieved after 200 cycles at the current density of 0.1 A g^?1 and ≈700 mAh g^?1 at 1 A g^?1 for over 600 cycles. These results suggest a great promise of the proposed particle architecture, which may have potential applications in the improvement of various energy storage materials.     

Nitrogen‐Doped Nanoporous Carbon/Graphene Nano‐Sandwiches: Synthesis and Application for Efficient Oxygen Reduction

A zeolitic‐imidazolate‐framework (ZIF) nanocrystal layer‐protected carbonization route is developed to prepare N‐doped nanoporous carbon/graphene nano‐sandwiches. The ZIF/graphene oxide/ZIF sandwich‐like structure with ultrasmall ZIF nanocrystals (i.e., ≈20 nm) fully covering the graphene oxide (GO) is prepared via a homogenous nucleation followed by a uniform deposition and confined growth process. The uniform coating of ZIF nanocrystals on the GO layer can effectively inhibit the agglomeration of GO during high‐temperature treatment (800 °C). After carbonization and acid etching, N‐doped nanoporous carbon/graphene nanosheets are formed, with a high specific surface area (1170 m² g^?1). These N‐doped nanoporous carbon/graphene nanosheets are used as the nonprecious metal electrocatalysts for oxygen reduction and exhibit a high onset potential (0.92 V vs reversible hydrogen electrode; RHE) and a large limiting current density (5.2 mA cm^?2 at 0.60 V). To further increase the oxygen reduction performance, nanoporous Co‐N_x/carbon nanosheets are also prepared by using cobalt nitrate and zinc nitrate as cometal sources, which reveal higher onset potential (0.96 V) than both commercial Pt/C (0.94 V) and N‐doped nanoporous carbon/graphene nanosheets. Such nanoporous Co‐N_x/carbon nanosheets also exhibit good performance such as high activity, stability, and methanol tolerance in acidic media.     

A High‐Performance Sodium‐Ion Hybrid Capacitor Constructed by Metal–Organic Framework–Derived Anode and Cathode Materials

Sodium‐ion hybrid capacitors (SIHCs) can potentially combine the virtues of high‐energy density of batteries and high‐power output as well as long cycle life of capacitors in one device. The key point of constructing a high‐performance SIHC is to couple appropriate anode and cathode materials, which can well match in capacity and kinetics behavior simultaneously. In this work, a novel SIHC, coupling a titanium dioxide/carbon nanocomposite (TiO₂/C) anode with a 3D nanoporous carbon cathode, which are both prepared from metal–organic frameworks (MOFs, MIL‐125 (Ti) and ZIF‐8, respectively), is designed and fabricated. The robust architecture and extrinsic pseudocapacitance of TiO₂/C nanocomposite contribute to the excellent cyclic stability and rate capability in half‐cell. Hierarchical 3D nanoporous carbon displays superior capacity and rate performance. Benefiting from the merits of structures and performances of anode and cathode materials, the as‐built SIHC achieves a high energy density of 142.7 W h kg^?1 and a high power output of 25 kW kg^?1 within 1–4 V, as well as an outstanding life span of 10 000 cycles with over 90% of the capacity retention. The results make it competitive in high energy and power–required electricity storage applications.     

Hierarchically Divacancy Defect Building Dual‐Activated Porous Carbon Fibers for High‐Performance Energy‐Storage Devices

Renewable and environmentally friendly biomass‐based carbon electrode materials naturally possess fast ion transport, high adsorption, and excellent chemical stability for high‐performance energy‐storage devices. However, intelligently building the effectively biomass‐transferred carbon materials for the requirement of high energy density is still a big challenge to date. Here, a hierarchically divacancy defect building platform is reported for effectively biomass‐transferred and highly interconnected 3D dual‐activated porous carbon fibers (DACFs) based on the internal?external dual‐activation function of the pre‐embedded KOH and CO₂ molecular. This uniquely interconnected frameworks not only fully provide the abundant active sites for ion interaction, but also efficiently guarantee the substantial accommodation for ion storage. Based on this, the as‐prepared DACFs‐based supercapacitors deliver a high energy density of 61.3 Wh kg^?1 at a power density of 875 W kg^?1 in the EMIMBF₄ ionic liquid. This work not only provides a simple and efficient technique to enhance the energy density of carbon materials, but also probably promotes its additional application in environmental remediation.     

Graphene Oxide‐Template Controlled Cuboid‐Shaped High‐Capacity VS4 Nanoparticles as Anode for Sodium‐Ion Batteries

Room‐temperature sodium‐ion batteries have attracted great attentions for large‐scale energy storage applications in renewable energy. However, exploring suitable anode materials with high reversible capacity and cyclic stability is still a challenge. The VS₄, with parallel quasi‐1D chains structure of V⁴⁺(S₂^2?)₂, which provides large interchain distance of 5.83 Å and high capacity, has showed great potential for sodium storage. Here, the uniform cuboid‐shaped VS₄ nanoparticles are prepared as anode for sodium‐ion batteries by the controllable of graphene oxide (GO)‐template contents. It exhibits superb electrochemical performances of high‐specific charge capacity (≈580 mAh·g^?1 at 0.1 A·g^?1), long‐cycle‐life (≈98% retain at 0.5 A·g?¹ after 300 cycles), and high rates (up to 20 A·g^?1). In addition, electrolytes are optimized to understand the sodium storage mechanism. It is thus demonstrated that the findings have great potentials for the applications in high‐performance sodium‐ion batteries.     

Rationally Engineered Electrodes for a High‐Performance Solid‐State Cable‐Type Supercapacitor

Wire‐shaped electrodes for solid‐state cable‐type supercapacitors (SSCTS) with high device capacitance and ultrahigh rate capability are prepared by depositing poly(3,4‐ethylenedioxythiophene) onto self‐doped TiO₂ nanotubes (D‐TiO₂) aligned on Ti wire via a well‐controlled electrochemical process. The large surface area, short ion diffusion path, and high electrical conductivity of these rationally engineered electrodes all contribute to the energy storage performance of SSCTS. The cyclic voltammetric studies show the good energy storage ability of the SSCTS even at an ultrahigh scan rate of 1000 V s^?1, which reveals the excellent instantaneous power characteristics of the device. The capacitance of 1.1 V SSCTS obtained from the charge–discharge measurements is 208.36 µF cm^?1 at a discharge current of 100 µA cm^?1 and 152.36 µF cm^?1 at a discharge current of 2000 µA cm^?1, respectively, indicating the ultrahigh rate capability. Furthermore, the SSCTS shows superior cyclic stability during long‐term (20 000 cycles) cycling, and also maintains excellent performance when it is subjected to bending and succeeding straightening process.     

A High‐Energy Lithium‐Ion Capacitor by Integration of a 3D Interconnected Titanium Carbide Nanoparticle Chain Anode with a Pyridine‐Derived Porous Nitrogen‐Doped Carbon Cathode

Lithium‐ion capacitors (LICs) are hybrid energy storage devices that have the potential to bridge the gap between conventional high‐energy lithium‐ion batteries and high‐power capacitors by combining their complementary features. The challenge for LICs has been to improve the energy storage at high charge?discharge rates by circumventing the discrepancy in kinetics between the intercalation anode and capacitive cathode. In this article, the rational design of new nanostructured LIC electrodes that both exhibit a dominating capacitive mechanism (both double layer and pseudocapacitive) with a diminished intercalation process, is reported. Specifically, the electrodes are a 3D interconnected TiC nanoparticle chain anode, synthesized by carbothermal conversion of graphene/TiO₂ hybrid aerogels, and a pyridine‐derived hierarchical porous nitrogen‐doped carbon (PHPNC) cathode. Electrochemical properties of both electrodes are thoroughly characterized which demonstrate their outstanding high‐rate capabilities. The fully assembled PHPNC//TiC LIC device delivers an energy density of 101.5 Wh kg^?1 and a power density of 67.5 kW kg^?1 (achieved at 23.4 Wh kg^?1), and a reasonably good cycle stability (≈82% retention after 5000 cycles) within the voltage range of 0.0?4.5 V.     

High Electroactive Material Loading on a Carbon Nanotube@3D Graphene Aerogel for High‐Performance Flexible All‐Solid‐State Asymmetric Supercapacitors

Freestanding carbon‐based hybrids, specifically carbon nanotube@3D graphene (CNTs@3DG) hybrid, are of great interest in electrochemical energy storage. However, the large holes (about 400 µm) in the commonly used 3D graphene foams (3DGF) constitute as high as 90% of the electrode volume, resulting in a very low loading of electroactive materials that is electrically connected to the carbon, which makes it difficult for flexible supercapacitors to achieve high gravimetric and volumetric energy density. Here, a hierarchically porous carbon hybrid is fabricated by growing 1D CNTs on 3D graphene aerogel (CNTs@3DGA) using a facile one‐step chemical vapor deposition process. In this architecture, the 3DGA with ample interconnected micrometer‐sized pores (about 5 µm) dramatically enhances mass loading of electroactive materials comparing with 3DGF. An optimized all‐solid‐state asymmetric supercapacitor (AASC) based on MnO₂@CNTs@3DGA and Ppy@CNTs@3DGA electrodes exhibits high volumetric energy density of 3.85 mW h cm^?3 and superior long‐term cycle stability with 84.6% retention after 20 000 cycles, which are among the best reported for AASCs with both electrodes made of pseudocapacitive electroactive materials.     

All‐Cellulose‐Based Quasi‐Solid‐State Sodium‐Ion Hybrid Capacitors Enabled by Structural Hierarchy

Na‐ion hybrid capacitors consisting of battery‐type anodes and capacitor‐style cathodes are attracting increasing attention on account of the abundance of sodium‐based resources as well as the potential to bridge the gap between batteries (high energy) and supercapacitors (high power). Herein, hierarchically structured carbon materials inspired by multiscale building units of cellulose from nature are assembled with cellulose‐based gel electrolytes into Na‐ion capacitors. Nonporous hard carbon anodes are obtained through the direct thermal pyrolysis of cellulose nanocrystals. Nitrogen‐doped carbon cathodes with a coral‐like hierarchically porous architecture are prepared via hydrothermal carbonization and activation of cellulose microfibrils. The reversible charge capacity of the anode is 256.9 mAh g^?1 when operating at 0.1 A g^?1 from 0 to 1.5 V versus Na⁺/Na, and the discharge capacitance of cathodes tested within 1.5 to 4.2 V versus Na⁺/Na is 212.4 F g^?1 at 0.1 A g^?1. Utilizing Na⁺ and ClO₄^? as charge carriers, the energy density of the full Na‐ion capacitor with two asymmetric carbon electrodes can reach 181 Wh kg^?1 at 250 W kg^?1, which is one of the highest energy devices reported until now. Combined with macrocellulose‐based gel electrolytes, all‐cellulose‐based quasi‐solid‐state devices are demonstrated possessing additional advantages in terms of overall sustainability.     

Black Titania with Nanoscale Helicity

The fabrication of mesoporous black titanium dioxide (TiO_2?x ) with a chiral nematic organization of core–shell nanorods is reported. Chiral templating of TiO₂ nanoparticles onto gelatin‐functionalized cellulose nanocrystals (CNCs) followed by calcination yields carbonized TiO₂/CNC helical materials that recover white TiO₂ replicas after carbon removal. The hydrothermal surface reduction of the traditional white TiO₂ by ascorbic acid affords freestanding chiral nematic black TiO_2?x. The black TiO_2?x is a visible light active semiconducting mesoporous structure constructed by chiral nematic crystalline–amorphous TiO₂ core–shell nanorods. The chiral black TiO_2?x nanoparticles supported on mesoporous nanocarbon networks are evaluated as lithium‐ion battery anode electrodes. Beyond the current efforts, these black TiO_2?x materials and their composites may be useful in the fields of energy storage and catalysis.     

Silicon‐Based Self‐Assemblies for High Volumetric Capacity Li‐Ion Batteries via Effective Stress Management

Silicon nanoparticles (Si NPs) have been considered as promising anode materials for next‐generation lithium‐ion batteries, but the practical issues such as mechanical structure instability and low volumetric energy density limit their development. At present, the functional energy‐storing architectures based on Si NPs building blocks have been proposed to solve the adverse effects of nanostructures, but designing ideal functional architectures with excellent electrochemical performance is still a significant challenge. This study shows that the effective stress evolution management is applied for self‐assembled functional architectures via cross‐scale simulation and the simulated stress evolution can be a guide to design a scalable self‐assembled hierarchical Si@TiO₂@C (SA‐SiTC) based on core–shell Si@TiO₂ nanoscale building blocks. It is found that the carbon filler and TiO₂ layer can effectively reduce the risk of cracking during (de)lithiation, ensuring the stability of the mechanical structure of SA‐SiTC. The SA‐SiTC electrode shows long cycling stability (842.6 mAh g^?1 after 1000 cycles at 2 A g^?1), high volumetric capacity (174 mAh cm^?3), high initial Coulombic efficiency (80.9%), and stable solid‐electrolyte interphase (SEI) layer. This work provides insight into the development of the structural stable Si‐based anodes with long cycle life and high volumetric energy density for practical energy applications.     

Electrochemical Na Insertion and Solid Electrolyte Interphase for Hard‐Carbon Electrodes and Application to Na‐Ion Batteries

Recently, lithium‐ion batteries have been attracting more interest for use in automotive applications. Lithium resources are confirmed to be unevenly distributed in South America, and the cost of the lithium raw materials has roughly doubled from the first practical application in 1991 to the present and is increasing due to global demand for lithium‐ion accumulators. Since the electrochemical equivalent and standard potential of sodium are the most advantageous after lithium, sodium based energy storage is of great interest to realize lithium‐free high energy and high voltage batteries. However, to the best of our knowledge, there have been no successful reports on electrochemical sodium insertion materials for battery applications; the major challenge is the negative electrode and its passivation. In this study, we achieve high capacity and excellent reversibility sodium‐insertion performance of hard‐carbon and layered NaNi_0.5Mn_0.5O₂ electrodes in propylene carbonate electrolyte solutions. The structural change and passivation for hard‐carbon are investigated to study the reversible sodium insertion. The 3‐volt secondary Na‐ion battery possessing environmental and cost friendliness, Na⁺‐shuttlecock hard‐carbon/NaNi_0.5Mn_0.5O₂ cell, demonstrates steady cycling performance as next generation secondary batteries and an alternative to Li‐ion batteries.