共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
针对一类欠驱动系统跟踪控制问题,提出了一种基于非线性干扰观测器的全局解耦快速终端滑模控制(NDODGFTSMC)策略。将欠驱动系统分解成两个子系统分别设计全局快速终端滑模面,利用其中一个子系统滑模面的符号函数来构造中间变量,并将该变量引入到另一个子系统的滑模面中,构造出整个系统的滑模面,采用等效控制法和模糊双幂次趋近律求解系统的控制律。同时为了消除系统扰动对控制效果的影响,设计了一种双曲正切非线性干扰观测器对系统干扰进行估计并补偿给控制器。利用Lyapunov稳定原理证明了系统滑模面的渐近稳定性。将该方法应用于小车倒立摆系统的控制中,仿真结果验证了其有效性及优越性。 相似文献
3.
针对一类复杂非线性系统,提出一种新型自适应快速非奇异终端滑模控制(IAFNTSMC)方法,用以解决其在输出时变约束及量化输入情形下的轨迹跟踪问题;利用鲁棒自适应方法处理扰动不确定性,并结合反演策略和终端滑模策略设计控制器;构造一种新型的时变约束障碍Lyapunov函数,用于实现对系统的输出误差进行随时间变化的幅值约束;为提高闭环系统的误差收敛速度,提出一种新型的滑模面构造方案.所提控制方法能够保证闭环系统的输出跟踪误差快速收敛到约束边界内,并确保闭环系统所有信号有界.数值仿真验证了所提方法的有效性. 相似文献
4.
5.
非匹配不确定系统的自适应反步非奇异快速终端滑模控制 总被引:1,自引:0,他引:1
针对一类n阶非匹配不确定系统,提出一种自适应反步非奇异快速终端滑模控制方法.控制的前n-1步采用自适应反步控制策略,消除非匹配不确定性的影响;最后一步利用误差的积分构造非奇异快速终端滑模面,设计控制律使系统第n个状态有限时间收敛.该方法对系统中匹配和非匹配不确定项均具有鲁棒性,比自适应反步终端滑模方法具有更快的收敛速度.理论分析证明了闭环系统的稳定性,仿真结果验证了该方法的有效性. 相似文献
6.
7.
基于混沌遗传算法的柔性机械手滑模控制器优化设计 总被引:2,自引:1,他引:1
针对柔性机械手动力学方程的非最小相位特点,本文提出一种柔性机械手的终端滑模控制方法,将关节电机转角和柔性模态变量的线性组合定义为柔性机械手系统的输出.通过输入输出线性化,将系统分解为输入输出子系统和零动态子系统.设计终端滑模控制策略,使输入输出子系统在有限时间收敛到零;利用混沌遗传算法优化控制器的设计参数,使零动态了系统在甲衡点附近渐近稳定,从而保证整个系统的渐近稳定.本文提出的方法设计过程简单,易于实现.仿真结果证明了设计的有效性. 相似文献
8.
针对具有不确定性的机器人系统,为提高系统的稳态跟踪精度,提出一种非奇异终端神经滑模轨迹跟踪控制方案.控制器采用改进的非奇异终端滑模面,并基于径向基函数神经网络自适应调整控制律的切换项,不但克服了在设计中需要知道系统不确定性的上界的限制,而且平滑了控制信号.可应用Lyapunov稳定性理论证明了系统的渐近稳定性和跟踪误差的渐近收敛性.仿真结果验证了控制方法不仅能够保证机器人系统轨迹跟踪控制的快速性和鲁棒性,而且有效地削弱了抖振,可见方案是可行且有效的. 相似文献
9.
参数不确定柔性机械手的终端滑模控制 总被引:2,自引:1,他引:1
针对参数不确定双臂柔性机械手系统, 提出一种基于遗传算法的终端滑模控制方法, 以实现其末端控制.基于输出重定义方法, 通过输入输出线性化, 将系统分解为输入输出子系统和内部子系统. 设计终端滑模控制策略,使输入输出子系统有限时间内收敛到零, 内部子系统变为零动态子系统; 采用遗传算法优化零动态子系统参数, 使其在平衡点附近渐近稳定. 根据Lyapunov稳定性理论算出末端输出位移的误差范围. 仿真结果证明该方法有效性. 相似文献
10.
11.
12.
13.
一种专家智能控制器的仿真研究 总被引:1,自引:0,他引:1
该文提出一种专家智能控制器(简称为EI控制器).该控制器的参数可基于专家知识和过程参数的变化实时进行调整。仿真结果表明对于工业过程中的大纯滞后、非线性、变参数特性能获得较为满意的调节效果。 相似文献
14.
对于具有较大时滞,非线性和时变性特点的打样机对象(它是印染行业中的一种小型设备),常规PID控制方法往往难以达到良好的控制效果.本文将专家控制器与常规PID控制器相结合,提出了一种智能控制器结构.试验表明,与常规PID控制器相比,该控制器的控制精度有了明显的提高. 相似文献
15.
An approach to the synthesis of control laws stabilizing motion and force in contact tasks, based on the exponential stability of the closed-loop control system, is described. When using the synthesized control laws, simultaneous stabilization of both motion and force is achieved with a preset quality of the transient responses. The task is solved in a most general form, taking into account the constraints on robot control, its position and the force of interaction of the robot and the environment, and the external perturbations and inaccuracies of the measuring sensors, when the environment dynamics is being described by nonlinear second-order differential equation, and the robot dynamics includes the third-order equations of the robot actuators dynamics. 相似文献
16.
模糊PID在电阻加热炉温控系统中的应用 总被引:2,自引:0,他引:2
在PID控制和Fuzzy控制的基础上,提出了一种模糊自调整PID控制,并基于Matlab对电阻加热炉温控系统进行了仿真。结果表明,模糊PID控制能使系统达到良好的控制效果。 相似文献
17.
Xian-Ming Zhang Qing-Long Han Xiaohua Ge Derui Ding Lei Ding Dong Yue Chen Peng 《IEEE/CAA Journal of Automatica Sinica》2020,7(1):1-17
Networked control systems are spatially distributed systems in which the communication between sensors, actuators,and controllers occurs through a shared band-limited digital communication network. Several advantages of the network architectures include reduced system wiring, plug and play devices,increased system agility, and ease of system diagnosis and maintenance. Consequently, networked control is the current trend for industrial automation and has ever-increasing applications in a wide range of areas, such as smart grids, manufacturing systems,process control, automobiles, automated highway systems, and unmanned aerial vehicles. The modelling, analysis, and control of networked control systems have received considerable attention in the last two decades. The ‘control over networks’ is one of the key research directions for networked control systems. This paper aims at presenting a survey of trends and techniques in networked control systems from the perspective of ‘control over networks’, providing a snapshot of five control issues: sampled-data control, quantization control, networked control, event-triggered control, and security control. Some challenging issues are suggested to direct the future research. 相似文献
18.
Fucheng Liao Chen Jia Usman Malik Xiao Yu Jiamei Deng 《International journal of systems science》2019,50(5):1017-1027
In the fault-tolerant control theory based on model following control, the desired signal of the control system is the output of a reference system. This paper is concerned with the design of the preview controller for a class of fault systems. A composite vector is introduced by including error vector, fault system state vector and reference system state vector. Then, we derived an augmented system from the known system equation, in which the reference input has equal status with the desired signal in the traditional preview control theory. Therefore, we can use the known theory to design the preview controller for the augmented system, then the preview controller of the original fault system can be obtained by the integration method. This paper strictly discusses the connection between stabilisation and detectability of the augmented system and the corresponding characteristics of the original system. Finally, by applying this theory to a real steam generator water level control system, it is found that the actions of the reference input preview and the fault signal preview can effectively eliminate the effect of the fault signal on the water level of the steam generator. The simulation shows the effectiveness of the controller designed. 相似文献
19.
结合生产实际,对粗轧控制系统进行综合设计。介绍粗轧控制系统的结构,以及粗轧核心APC控制、粗轧RAWC控制和带钢SSC控制的控制思想并给出相应控制算法。 相似文献
20.
根据复杂锅炉温度系统,设计出一种自适应模糊PID控制器。其优点是应用模糊控制适应系统的不确定性,能够提高对象模型不确定时PID参数的自适应能力。很大程度上改善了系统的控制质量,提高了系统的鲁棒性。实际运行结果证明了该方法的有效性。 相似文献