Hydrothermal growth of rutile TiO2 nanorod films on titanium substrates

Rutile TiO₂ nanorod films have been successfully prepared on titanium substrate via a hydrothermal method using Tetra-n-butyl titanate as Ti source in the presence of concentrated hydrochloric acid. The effect of Ti substrate annealing treatment and adding of additional alkali metal chlorides in hydrothermal solution on the growth of TiO₂ nanorod films has been studied using scanning electron microscopy (SEM), Raman spectroscopy, X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and water contact angle measurement. The growth mechanism of the TiO₂ nanorods on Ti substrate has also been discussed. It has shown that the initial rutile film transformed from anatase promotes the nucleation and epitaxial growth of rutile TiO₂ nanorods. The superior wettabilities of the TiO₂ nanorods resulted from treatments of vacuum and ultraviolet show great potential for applications in orthopaedic, dental implants, and possible photocatalysis.     

Synthesis of highly-active single-crystalline TiO2 nanorods and its application in environmental photocatalysis

Highly-active anatase TiO₂ nanorods have been successfully synthesized via a simple two-step method, hydrothermal treatment of anatase/rutile titanium dioxide nanoparticle powder in a composite-hydroxide eutectic system of 1:1 M KOH/NaOH, followed by acid post-treatment. The morphology and crystalline structure of the obtained nanorods were characterized using XRD, TEM, SEM/EDX and BET surface area analyzer. The obtained TiO₂ nanorods have a good crystallinity and a size distribution (about 4-16 nm); with the dimensions of 200-300 nm length and of 30-50 nm diameter. Compared with its precursor anatase/rutile TiO₂ nanoparticles and the titanate nanotubes, the pure anatase TiO₂ nanorods have a large specific surface area with a mesoporous structure. The photocatalytic performance of the prepared nanorods was tested in the degradation of the commercial Cibacrown Red (FN-R) textile dye, under UV irradiation. Single-crystalline anatase TiO₂ nanorods are more efficient for the dye removal.     

One‐Dimensional Densely Aligned Perovskite‐Decorated Semiconductor Heterojunctions with Enhanced Photocatalytic Activity

By using one‐dimensional rutile TiO₂ nanorod arrays as the structure‐directing scaffold as well as the TiO₂ source to two consecutive hydrothermal reactions, densely aligned SrTiO₃‐modified rutile TiO₂ heterojunction photocatalysts are crafted for the first time. The first hydrothermal processing yielded nanostructured rutile TiO₂ with the hollow openings on the top of nanorods (i.e., partially etched rutile TiO₂ nanorod arrays; denoted PE‐TNRAs). The subsequent second hydrothermal treatment in the presence of Sr²⁺ transforms the surface of partially etched rutile TiO₂ nanorods into SrTiO₃ nanoparticles via the concurrent dissolution of TiO₂ and precipitation of SrTiO₃ while retaining the cylindrical shape (i.e., forming SrTiO₃‐decorated rutile TiO₂ composite nanorods; denoted STO‐TNRAs). The structural and composition characterizations substantiate the success in achieving STO‐TNRA nanostructures. In comparison to PE‐TNRAs, STO‐TNRA photocatalysts exhibit higher photocurrents and larger photocatalytic degradation rates of methylene blue (3.21 times over PE‐TNRAs) under UV light illumination as a direct consequence of improved charge carrier mobility and enhanced electron/hole separation. Such 1D perovskite‐decorated semiconductor nanoarrays are very attractive for optoelectronic applications in photovoltaics, photocatalytic hydrogen production, among other areas.     

Low temperature preparation of TiO2 nanodot film on substrates

Herein, we report a photoinduced transition of hydrophobicity to high hydrophilicity of TiO₂ nanodot films in applications of cell sheet engineering. A phase-separation-induced self-assembly process was adopted to prepare a TiO₂ nanodot gel film on a substrate. Subsequently, a hydrothermal treatment (with ethanol/water at 140 °C for 2 h) was used to convert the nanodot gel film to TiO₂ nanodot solid film. The resulting TiO₂ dots were amorphous with adjustable size and density. The amorphous TiO₂ nanodot film showed a conversion from a good hydrophobic surface, with a water contact angle (WCA) of 67.6 ± 2.0°, to a highly hydrophilic one, with a WCA of 5.3 ± 2.0° (i.e. almost superhydrophilic) after UV irradiation. A good reversibility was also observed.     

Heterostructured TiO2 Nanorod@Nanobowl Arrays for Efficient Photoelectrochemical Water Splitting

Heterostructured TiO₂ nanorod@nanobowl (NR@NB) arrays consisting of rutile TiO₂ nanorods grown on the inner surface of arrayed anatase TiO₂ nanobowls are designed and fabricated as a new type of photoanodes for photoelectrochemical (PEC) water splitting. The unique heterostructures with a hierarchical architecture are readily fabricated by interfacial nanosphere lithography followed by hydrothermal growth. Owing to the two‐dimensionally arrayed structure of anatase nanobowls and the nearly radial alignment of rutile nanorods, the TiO₂ NR@NB arrays provide multiple scattering centers and hence exhibit an enhanced light harvesting ability. Meanwhile, the large surface area of the NR@NB arrays enhances the contact with the electrolyte while the nanorods offer direct pathways for fast electron transfer. Moreover, the rutile/anatase phase junction in the NR@NB heterostructure improves charge separation because of the facilitated electron transfer. Accordingly, the PEC measurements of the TiO₂ NR@NB arrays on the fluoride‐doped tin oxide (FTO) substrate show significantly enhanced photocatalytic properties for water splitting. Under AM1.5G solar light irradiation, the unmodified TiO₂ NR@NB array photoelectrode yields a photocurrent density of 1.24 mA cm^–2 at 1.23 V with respect to the reversible hydrogen electrode, which is almost two times higher than that of the TiO₂ nanorods grown directly on the FTO substrate.     

Rutile TiO2 nanorod arrays directly grown on Ti foil substrates towards lithium-ion micro-batteries

Nanosized rutile TiO₂ is one of the most promising candidates for anode material in lithium-ion micro-batteries owing to their smaller dimension in ab-plane resulting in an enhanced performance for area capacity. However, few reports have yet emerged up to date of rutile TiO₂ nanorod arrays growing along c-axis for Li-ion battery electrode application. In this study, single-crystalline rutile TiO₂ nanorod arrays growing directly on Ti foil substrates have been fabricated using a template-free method. These nanorods can significantly improve the electrochemical performance of rutile TiO₂ in Li-ion batteries. The capacity increase is about 10 times in comparison with rutile TiO₂ compact layer.     

Titanium oxide thin film deposited on metallic Cr substrate by RF-magnetron sputtering

In order to develop a colored mirror with hydrophilicity, TiO₂ films are deposited on the Cr and amorphous-TiO₂ substrate. In TiO₂/Cr, a mixed phase comprising of anatase and rutile is formed. In TiO₂/amorphous-TiO₂/Cr, pure anatase phase is obtained. The amorphous-TiO₂ film as interlayer tends to induce micro-columnar-shaped anatase phase. The formation of anatase phase leads to an abrupt decrease of the contact angle by UV-irradiation. Hydrophilic to hydrophobic reconversion by electron-hole recombination is retarded, which seems to be due to pure anatase phase without rutile phase.     

Facile synthesis of luminescent TiO2 nanorods using an anionic surfactant: Their photosensitization and photocatalytic efficiency

Mixed phase (rutile/anatase) TiO₂ nanorods have been synthesized using an anionic surfactant template. Nanorod synthesis has been achieved using mild reaction conditions and without using any rod-shaped template. The shape and crystallinity of the TiO₂ nanomaterials can be modulated by careful control of the surfactant concentration. The novelty of the present work is that the anatase/rutile mixed phase nanorods were formed without using the well-known layer by layer assembly method or the hydrothermal method. These mixed phase TiO₂ nanorods are highly luminescent, can be easily sensitized by fluorescent dyes, show significant dye adsorption ability and function as efficient photocatalysts.     

Structural engineering of thin films of vertically aligned TiO2 nanorods

Self-assembled and vertically aligned rutile titania nanorods and thin films with a preferred [002] axial orientation were grown on substrates of fluorine-doped tin dioxide, using a hydrothermal method. Each nanorod was made of a bundle of densely packed and ultra fine nano-fibers growing along the [002] direction. The results show that ethanol substitution of water as solvent is highly effective in promoting the one-dimensional growth of the rutile nanorods and increasing their packing density in the thin films, which offers a simple-but-effectual leverage to monitor the nanorod structures for varied applications.     

Apatite formation from simulated body fluid on various phases of TiO2 thin films prepared by filtered cathodic vacuum arc deposition

Hydroxyl (OH⁻)-free TiO₂ thin films with amorphous and crystalline phases were deposited onto (100) silicon substrates using filtered cathodic vacuum arc deposition in order to investigate the in vitro apatite formation in simulated body fluid (SBF). The surface morphology, composition and structure of the TiO₂ thin films were characterized. The X-ray photoelectron spectroscopy results confirmed the presence of calcium and phosphorus on all TiO₂ thin film surfaces after immersion in SBF at 37 °C. Fourier transform infra red results showed the presence of carbonated apatite on the surface of these films. Amorphous structured TiO₂ thin film showed poor ability to form apatite on its surface in SBF. Apatite formation was more pronounced on the surfaces of the anatase films in comparison to those of rutile. The carbonated apatite deposition rate increased significantly when the TiO₂ film was illuminated with UV light prior to immersing in the SBF. In particular, the UV-treated anatase and rutile films showed increased rates of carbonated apatite formation on their surfaces in comparison to samples not treated with radiation. The increase in hydrophilicity due to UV treatment appears beneficial for the apatite growth on these surfaces.     

Fabrication of TiO2 nanotube film by well-aligned ZnO nanorod array film and sol-gel process

High density TiO₂ nanotube film with hexagonal shape and narrow size distribution was fabricated by templating ZnO nanorod array film and sol-gel process. Well-aligned ZnO nanorod array films obtained by aqueous solution method were used as template to synthesize ZnO/TiO₂ core-shell structure through sol-gel process. Subsequently, TiO₂ nanotube array films survived by removing the ZnO nanorod cores using wet-chemical etching. Polycrystalline anatase TiO₂ nanotube films were ∼ 1.5 μm long and ∼ 100 nm in inter diameter with a wall thickness of ∼ 10 nm.     

Nonlinear optical response of titanium oxide nanostructured thin films

Titanium (IV) oxide thin films prepared by low temperature (95 °C) hydrothermal growth were observed to undergo important structural modifications upon variation of the deposition period, modifications strongly affecting the nonlinear optical (NLO) response of the films. Depending on the growth time, the films were observed to contain anatase or rutile TiO₂. It was found that only anatase TiO₂ exhibits significant nonlinear optical response.     

Investigation on the structure of TiO2 films sputtered on alloy substrates

Titanium dioxide (TiO₂) films have been successfully deposited on metal alloy substrates by radio-frequency magnetron reactive sputtering in an Ar+O₂ gas mixture. The effects of gas total pressure on the structure and phase transition of TiO₂ films were studied by X-ray diffraction and Raman spectra. It is suggested that the film structure changes from rutile to anatase while work gas total pressure changes from 0.2 to 2 Pa. The structure of TiO₂ films is not affected by the film thickness.     

无模板法可控合成多层次结构二氧化钛微球

以1,4-二氧六环为溶剂,采用溶剂热法成功实现无模板法可控合成二氧化钛多层次结构微球。通过系统改变反应体系中浓盐酸与四异丙醇钛(TTIP)相对物质的量比能够有效调控二氧化钛形貌。当浓盐酸与TTIP物质的量比控制在0(或0.7或0.9)、1.8、3.6与5.7时,所得产物分别为纳米颗粒构建二氧化钛微球、纳米棒修饰二氧化钛微球、纳米棒花菜结构以及纳米棒海胆结构。在成功进行形貌调控的基础上,进一步探讨了二氧化钛多种结构的形成机理,并对其光催化产氢性能进行了表征。研究发现,在这4种结构中,纳米棒修饰二氧化钛微球具有最佳的光催化性能,这可能是由于同时存在金红石和锐钛矿两种晶型而形成异质结结构所导致。     

Hydrothermal in-situ growth of Tris(8-hydroxyquinolate) aluminum nanorods thin films

Tris(8-hydroxyquinolate) aluminum(Alq₃) thin films assembled with large-scaled nanorods have been fabricated on Al substrates through hydrothermal in-situ growth method assisted by the surfactant of sodium dodecylbenzenesulfonate. The obtained Alq₃ thin film is composed of uniformly sized (500-800nm × 4-10 μm) nanorods with regular hexagonal cross section, which are assembled to form dense nanorod arrays perpendicularly to the Al substrate. X-ray diffraction revealed that the prepared Alq₃ nanorods were the α-phase. Photoluminescence spectra showed that the Alq₃ nanorods thin film possessed a spectral blue-shift (10 nm) compared with the Alq₃ solution. The hydrothermal growth mechanism of nanorods was studied, which implied that the hydrothermal in-situ growth process on the metal substrate played an important role in the formation of the Alq₃ nanorods thin film. This simple hydrothermal method provides a convenient fabrication approach for nanocrystalline functional organic/metal interface.     

The effect of the H2 flow rate on the structure and optical properties of TiO2 films deposited by inductively coupled plasma assisted chemical vapor deposition

The optical and photocatalytic properties of TiO₂ are closely related to crystalline structures, such as rutile and anatase. In this paper, TiO₂ films were produced by inductively coupled plasma (ICP) assisted chemical vapor deposition (CVD) without extra heating of the substrate, and the effect of H₂ addition on the structure and optical properties of the films was investigated. After increasing the partial pressure of H₂, the structure of the TiO₂ films changed from anatase to rutile, which usually appears at high temperatures (> 600 °C). The light transmittance decreased with increasing the H₂ flow rate due to the increased surface roughness. The photocatalytic activity of the anatase TiO₂ film was better than that of the rutile TiO₂ film.     

Pulsed laser deposition of titania on rutile nanorod arrays

Oriented rutile nanorod arrays are precipitated on metallic Ti plates from a precursor derived by interactions between Ti and aqueous hydrogen peroxide. Pulsed laser deposition (PLD) is then carried out to deposit titania on the nanorod arrays, in comparison with bare Ti substrates, utilizing a high-temperature sintered rutile target in oxygen atmosphere. It is found that dense and homogeneous titania thin films are obtained on Ti substrates; while growth on the rutile nanorod arrays is epitaxial, resulting in enlarged nanorods conformally covered with titania. Titania grown on both Ti substrates and rutile nanorod arrays is either pure rutile or a mixture of anatase and rutile, with the formation of anatase favored by an increasing oxygen pressure during the PLD procedure. The surface roughness and the particle size of the dense titania films on Ti substrates increase as a result of increasing oxygen pressure and prolonged deposition time. The PLD-induced epitaxial growth of titania is inhibited by increasing substrate temperatures. The photocatalytic experiments reveal a significantly enhanced activity for the rutile nanorod arrays after a subsequent PLD treatment.     

Hydrothermal transformation of titanate nanotubes into single-crystalline TiO2 nanomaterials with controlled phase composition and morphology

Single-crystalline TiO₂ nanomaterials were synthesized by hydrothermally treating suspensions of H-titanate nanotubes and characterized by XRD, TEM, and HRTEM. The effects of the pH values of the suspensions and the hydrothermal temperatures on the phase composition and morphology of the obtained TiO₂ nanomaterials were systematically investigated. The H-titanate nanotubes were predominately transformed into anatase nanoparticle with rhombic shape when the pH value was greater than or equal to 1.0, whereas primarily turned into rutile nanorod with two pyramidal ends at the pH value less than or equal to 0.5. We propose a possible mechanism for hydrothermal transformation of H-titanate nanotubes into single-crystalline TiO₂ nanomaterials. While the H-titanate nanotubes transform into tiny anatase nanocrystallites of ca. 3 nm in size, the formed nanocrystallites as an intermediate grow into the TiO₂ nanomaterials with controlled phase composition and morphology. This growth process involves the steps of protonation, oriented attachment, and Ostwald ripening.     

Influence of SiO2 interlayer on the hydrophilicity of TiO2/SiO2/glass produced by RF-magnetron sputtering

The effect of silicon dioxide (SiO₂) on the hydrophilicity of the TiO₂ thin film is investigated. SiO₂ and TiO₂ films were deposited on the glass by RF-magnetron sputtering. Heat-treatment for 15 h at 573 K on TiO₂/glass and TiO₂/SiO₂/glass is carried out to make Na⁺-ion diffused from the glass to the TiO₂ thin film, which results in no band-gap change but instead the enhanced crystallinity of the anatase phase-TiO₂. This in turn leads to the improvement in hydrophilicity. Irrespective of the SiO₂ interlayer, the anatase phase-TiO₂ thin film with enhanced crystallinity shows outstanding super-hydrophilicity. Consequently, under the heat-treatment condition, the SiO₂ interlayer played an important role in improving the crystallinity of the anatase phase-TiO₂ rather than preventing Na⁺-ion diffusion.     

Hydrothermal synthesis, characterization and properties of TiO2 nanorods on boron-doped diamond film

The rutile TiO₂ nanorods have been hydrothermally synthesized on boron-doped diamond (BDD) film with a ZnO buffer layer. It is demonstrated that the ZnO buffer layer plays a key role in increasing the density and improving the morphology of synthesized TiO₂ nanorods. The heterojunction of n-TiO₂ nanorods/p-BDD shows an evident rectifying behavior with a ratio of ∼ 180 at 6 V. Experimentally, the TiO₂ nanorod-covered BDD exhibits an improved electron field-emission property over that without using a ZnO buffer layer.