Development of a sustained release dosage form for alpha-lipoic acid. II. Evaluation in human volunteers

Within this study an oral sustained release dosage form of alpha-lipoic acid (thioctic acid) has been generated and evaluated in healthy volunteers. A granulate comprising 56.8% alpha-lipoic acid and 43.2% chitosan acetate was compressed to tablets (weight: 0.45 g; diameter: 10.0 mm; thickness: 4 mm). Three of these tablets were administered at once orally to each volunteer. Prior to administration and then every hour for 12 hours blood samples were taken from the antebrachial vein. alpha-Lipoic acid concentrations in plasma were quantified via precolumn derivatization and reversed-phase high-performance liquid chromatography (HPLC). Results demonstrated that an increased plasma level of alpha-lipoic acid can be achieved by this formulation for at least 12 hours. Within this time period at least two maximum plasma concentrations were reached. The first one is based on the release of alpha-lipoic acid, which is not ionically and therefore only loosely bound to chitosan, whereas a second maximum is based on the release of the drug during the enzymatic degradation of the chitosan matrix in the colon. The AUC(0-12) was determined to be 183.8 +/- 101.4 microg x min/mL (mean +/- SD; n = 8). Because of the pulsed sustained release of alpha-lipoic acid, the dosage form described here seems to be highly beneficial in order to stimulate the glucose uptake in the case of diabetes type II.     

S-adenosyl-l-methionine (SAMe)-loaded nanochitosan particles: synthesis,characterisation and in vitro drug release studies

Chitosan-based drug carriers are being widely exploited for sustained and targeted delivery in cancer, anti-depression and nutritive therapeutics. In this paper, we report the preparation of S-adenosyl-l-methionine (SAMe) drug-loaded nanochitosan-based tablets and the sustained delivery of the drug substance in simulated intestinal conditions through an in vitro study. The convertibility of high molecular weight commercial chitosan to nanoparticles by ionic gelation using potassium pyrophosphate was achieved without employing harsh reaction conditions through an intermediate water-soluble chitosan preparation. The prepared nanochitosan particles with an average size of 85–127 nm showed good drug-loading capacity. In vitro release studies showed a continuous and slow release of the drug over 14 hours. Different kinetics models were applied to drug release data in order to evaluate the releasing mechanism. The drug release data fit well into the Higuchi expression, suggesting a diffusion-controlled drug delivery. The diffusional coefficient of 1.83 indicated that the drug release from the chitosan matrix was through swelling of the matrix. Agreement of the kinetic data with Higuchi and Korsmeyer–Peppas models have led us to conclude that the delivery of the SAMe drug from the nanochitosan drug carrier took place by the diffusion-controlled swelling mechanism described as Super case II transport. The prepared nanochitosan matrix was also found to be an environment-sensitive vehicle suitable for controlled drug delivery.     

Atenolol Gastrointestinal Therapeutic System. I. Screening of Formulation Variables

Conventional dosage forms are disadvantageous for drugs having short half-lives because of cyclic under- or overdosing and problems of patient compliance. The matrix or reservoir type of controlled-release dosage form provides an alternative. However, bioavailability fluctuations due to gastric pH variations continue to be a problem for many drug candidates. Osmotically controlled drug delivery systems provide a means of eliminating the effect of pH on drug release. However, the literature information is very limited for the effects of formulation variables and other process variables on the release kinetics of drugs from osmotically controlled systems. The objective of this study was to evaluate the factors that influence the release of atenolol, a cardioselective p blocker, from biconvex. bilayered, osmotically controlled tablets coated with a semipermeable membrane of cellulose acetate. Coating was achieved using a Uni-Glatt fluidized-bed coater. Orifices were drilled for drug release and a seven-factor 12-run Plackett-Burman screening technique was employed to evaluate the effects of orifice size, coating level, amounts of sodium chloride, Polyox® N80 and 303, and Carbopol® 934P and 974P on drug release. Response variable was cumulative percent released in 24 hr with constraints on time for 25% and 50% drug release. Factors showing maximum influence on drug release in decreasing order were amounts of Carbopol 934P, coating levels, and orifice size, with the main effect magnitudes of -43.1, 11.56, and 8.17, respectively. Comparative studies for the drug-additive interactions were peeormed using x-ray diffraction and differential scanning calorimetry (DSC). Results of Plackett-Burman screening, x-ray diffraction, and DSC studies are presented.     

Sustained-release from layered matrix system comprising chitosan and xanthan gum

Sustained-release tablets of propranolol HCl were prepared by direct compression using chitosan and xanthan gum as matrix materials. The effective prolongation of drug release in acidic environment was achieved for matrix containing chitosan together with xanthan gum which prolonged the drug release more extensive than that containing single polymer. Increasing lactose into matrix could adjust the drug release characteristic by enhancing the drug released. Component containing chitosan and xanthan gum at ratio 1:1 and lactose 75% w/w was selected for preparing the layered matrix by tabletting. Increasing the amount of matrix in barrier or in middle layer resulted in prolongation of drug release. From the investigation of drug release from one planar surface, the lag time for drug release through barrier layer was apparently longer as the amount of barrier was enhanced. Least square fitting the experimental dissolution data to the mathematical expressions (power law, first order, Higuchi's and zero order) was performed to study the drug release mechanism. Layering with polymeric matrix could prolong the drug release and could shift the release pattern approach to zero order. The drug release from chitosan-xanthan gum three-layer tablet was pH dependent due to the difference in charge density in different environmental pH. FT-IR and DSC studies exhibited the charge interaction between of NH₃⁺ of chitosan molecule and COO^- of acetate or pyruvate groups of xanthan gum molecule. The SEM images revealed the formation of the loose membranous but porous film that was due to the gel layer formed by the polymer relaxation upon absorption of dissolution medium. The decreased rate of polymer dissolution resulting from the decreased rate of solvent penetration was accompanied by a decrease in drug diffusion due to ionic interaction between chitosan and xanthan gum. This was suggested that the utilization of chitosan and xanthan gum could give rise to layered matrix tablet exhibiting sustained drug release.     

Effect of heat on characteristics of chitosan film coated on theophylline tablets

The effect of heat on the characteristics of chitosan film coated on theophylline tablets was studied. Chitosan of high viscosity grade with molecular weight in the range of 800,000-1,000,000, 80-85% degree of deacetylation was used as a film former by dissolving in 1% v/v acetic acid solution. The coated tablets had been cured at 40, 60, and 100°C for 6, 12, and 24 hr. The morphology of the film at the edge and surface of coated tablets was investigated using scanning electron microscopy. Film cracking was increased and clearly observed in the coated tablets cured at 100°C for 24 hr. As a result, more water could be absorbed into the tablets, followed by faster disintegration and faster drug release. The evidence of partial conversion of chitosonium acetate to chitin in the ¹³C nuclear magnetic resonance (NMR) spectra of chitosan films cured at 40, 60, and 100°C was observed, but it had no effect on drug release behavior. Theophylline tablets coated with chitosan films gave sustained release behavior in various media, i.e., distilled water, 0.1 N hydrochloric acid, pH 4.5 acetate buffer, and pH 6.8 phosphate buffer. In addition, the film coating temperature at 55-60°C and curing process at 40 and 60°C had no effect on the drug release from theophylline tablets coated with chitosan polymer. Finally, it might be concluded that both the physical and chemical properties of chitosan films were affected by heat.     

Controlled drug delivery system based on magnetic hollow spheres/polyelectrolyte multilayer core-shell structure

A novel controlled drug delivery system was fabricated by coating chitosan/PAA multilayer onto magnetic hollow spheres via a "Layer-by-Layer" (LBL) assembly approach. Cefradine was used as a model drug to evaluate the drug release characteristics of this core-shell hollow structure and the results show that it exhibits a sustained release of the drug and the release rate can be regulated by the pH environment of release medium. It is believed that this core-shell hollow structure, which combines the advantage of controlled delivery as well as magnetic targeting, has commendable potential in drug delivery therapeutics.     

Evaluation of selected polysaccharide excipients in buccoadhesive tablets for sustained release of nicotine

Some naturally occurring biocompatible materials were evaluated as mucoadhesive controlled release excipients for buccal drug delivery. A range of tablets were prepared containing 0-50% w/w xanthan gum, karaya gum, guar gum, and glycol chitosan and were tested for swelling, drug release, and mucoadhesion. Guar gum was a poor mucoadhesive and lacked sufficient physical integrity for buccal delivery. Karaya gum demonstrated superior adhesion to guar gum and was able to provide zero-order drug release, but concentrations greater than 50% w/w may be required to provide suitable sustained release. Xanthan gum showed strong adhesion to the mucosal membrane and the 50% w/w formulation produced zero-order drug release over 4 hours, about the normal time interval between daily meals. Glycol chitosan produced the strongest adhesion, but concentrations greater than 50% w/w are required to produce a nonerodible matrix that can control drug release for over 4 hours. Swelling properties of the tablets were found to be a valuable indicator of the ability of the material to produce sustained release. Swelling studies also gave an indication of the adhesion values of the gum material where adhesion was solely dependent upon penetration of the polymer chains into the mucus layer.     

Sustained-release from Layered Matrix System Comprising Chitosan and Xanthan Gum

ABSTRACT

Sustained-release tablets of propranolol HCl were prepared by direct compression using chitosan and xanthan gum as matrix materials. The effective prolongation of drug release in acidic environment was achieved for matrix containing chitosan together with xanthan gum which prolonged the drug release more extensive than that containing single polymer. Increasing lactose into matrix could adjust the drug release characteristic by enhancing the drug released. Component containing chitosan and xanthan gum at ratio 1:1 and lactose 75% w/w was selected for preparing the layered matrix by tabletting. Increasing the amount of matrix in barrier or in middle layer resulted in prolongation of drug release. From the investigation of drug release from one planar surface, the lag time for drug release through barrier layer was apparently longer as the amount of barrier was enhanced. Least square fitting the experimental dissolution data to the mathematical expressions (power law, first order, Higuchi's and zero order) was performed to study the drug release mechanism. Layering with polymeric matrix could prolong the drug release and could shift the release pattern approach to zero order. The drug release from chitosan-xanthan gum three-layer tablet was pH dependent due to the difference in charge density in different environmental pH. FT-IR and DSC studies exhibited the charge interaction between of NH₃⁺ of chitosan molecule and COO^? of acetate or pyruvate groups of xanthan gum molecule. The SEM images revealed the formation of the loose membranous but porous film that was due to the gel layer formed by the polymer relaxation upon absorption of dissolution medium. The decreased rate of polymer dissolution resulting from the decreased rate of solvent penetration was accompanied by a decrease in drug diffusion due to ionic interaction between chitosan and xanthan gum. This was suggested that the utilization of chitosan and xanthan gum could give rise to layered matrix tablet exhibiting sustained drug release.     

Carbamazepine Modified Release Dosage Forms

The preparation of sustained release dosage forms of Carbamazepine (anti-epileptic drug characterized by a very low water solubility and by a short half life on chronique dosing) was carried out.

These formulations were obtained in two different steps:

a) modified release granules were prepared by the loading of cross-linked sodium carboxymethylcellulose (swellable polymer), with the drug and an enteric polymer. Cellulose acetate phthalate, methacrylic acid - methacrylic acid methyl ester copolymer (usually employed as enteric coating agents) and cellulose acetate trimellitate (a new enteric polymer) were used in different weight ratios.

b) some sustained release dosage forms were prepared tabletting physical mixtures of the modified release granules with different weight ratios of hydroxypropylmethylcellulose.

In vitro dissolution tests of modified release granules in gastric fluid (USP XXI) showed a modulation of the drug release, while in intestinal fluid (USP XXI) a quick drug dissolution was observed.

In vitro dissolution tests of sustained release dosage forms, performed varying during the test, the pH of the dissolution medium, (hydrochloric acid pH 1 from 0 to 2 hours and phosphate buffer pH 6.8 from 2 to 18 hours) showed that the determining factors in the controlling release of the drug are: the type and amount of enteric polymer constituting the granules and the amount of hydroxy-propylmethylcellulose mixed with them.     

多功能壳聚糖水凝胶医用材料的功能性研究

作为一类兼具应用价值和经济效益的新型功能高分子材料,水凝胶越来越受关注。以天然可降解的壳聚糖为载体,通过自由基接枝共聚法制备了壳聚糖水凝胶,重点研究了其吸附性及药物控释性能。结果表明:该水凝胶20d左右可以完全降解,降解性能良好。在25℃条件下,铜离子浓度为1200mg/L时,壳聚糖水凝胶对铜离子的平衡吸附量可达225.8mg/g。以亚甲基蓝为药物模型的控释实验结果表明,温度以及初始药物投加量对控释性能影响较大,48h累积释放率达70%左右,可在一定程度上实现缓释控释效果。     

Cytocompatible chitosan-graft-mPEG-based 5-fluorouracil-loaded polymeric nanoparticles for tumor-targeted drug delivery

Biodegradable materials like chitosan (CH) and methoxy polyethylene glycol (mPEG) are widely being used as drug delivery carriers for various therapeutic applications. In this study, copolymer (CH-g-mPEG) of CH and carboxylic acid terminated mPEG was synthesized by carbodiimide-mediated acid amine reaction. The resultant hydrophilic copolymer was characterized by Fourier transform infrared spectroscopy and ¹H NMR studies, revealing its relevant functional bands and proton peaks, respectively. Blank polymeric nanoparticles (B-PNPs) and 5-fluorouracil loaded polymeric nanoparticles (5-FU-PNPs) were formulated by ionic gelation method. Furthermore, folic acid functionalized FA-PNPs and FA-5-FU-PNPs were prepared for folate receptor-targeted drug delivery. FA-5-FU-PNPs were characterized by particle size, zeta potential, and in vitro drug release studies, resulting in 197.7?nm,?+29.9?mv, and sustained drug release of 88% in 24?h, respectively. Cytotoxicity studies were performed for FA-PNPs and FA-5-FU-PNPs in MCF-7 cell line, which exhibited a cell viability of 80 and 41%, respectively. In vitro internalization studies were carried out for 5-FU-PNPs and FA-5-FU-PNPs which demonstrated increased cellular uptake of FA-5-FU-PNPs by receptor-mediated transport. Significant (p?相似文献   

Preparation of embolic NEMs loading capecitabine

The nanoparticles-embedded microcapsules (NEMs) with smooth surface, good sphericity, excellent dispersivity and uniform particle size distribution were prepared by emulsification combined with electrospraying to extend the sustained release performance of the embolic microcapsules loading capecitabine (CAP). The sodium alginate and chitosan with good biocompatibility were used as the materials and CAP as a small-molecule model drug. The drug loading, encapsulation efficiency and drug release of CAP in the NEMs were investigated. The results showed that the drug-loading and encapsulation efficiency both increased with the increment of chitosan and CAP concentration. The maximum values of drug loading and encapsulation efficiency were 1.97 and 18.01 % respectively when initial CAP concentration was 5.0 g/L and chitosan molecular weight 100 kDa. The cumulative release rate of CAP released from the NEMs was lower than 30 % in 0.5 h, which indicated that there was no obvious initial burst release behavior. In the subsequent 240 h, the release results confirmed that the NEMs had better sustained release properties compared to pure microcapsules, and it might be a new anticancer drug delivery system in the future studies.     

可注射乙酰化乙二醇壳聚糖/泊洛沙姆复合水凝胶的制备及药物缓释研究EI北大核心CSCD

泊洛沙姆(poloxamer)是一种温敏性聚合物,在浓度为15.0%(质量分数,下同)~30.0%时可形成凝胶。为改善泊洛沙姆在体温下的成胶浓度和药物缓释性能,以泊洛沙姆407为基底,与新型温敏性乙酰化乙二醇壳聚糖复合,制得了温敏性乙酰化乙二醇壳聚糖/泊洛沙姆复合水凝胶。通过傅里叶变换红外光谱(FT-IR)、试管倒置法、旋转流变仪、扫描电子显微镜(SEM)和紫外-可见分光光度计(UV-vis)对乙酰化乙二醇壳聚糖/泊洛沙姆的结构、温敏性、力学性能、微观形貌和体外药物释放性能进行表征。结果表明,乙酰化乙二醇壳聚糖/泊洛沙姆溶液具有热可逆温敏性溶胶-凝胶转变行为。通过控制乙酰化乙二醇壳聚糖/泊洛沙姆的质量比,能够使溶胶-凝胶转变温度处于室温与体温(25~37℃)之间,缩短凝胶化时间(382s),降低泊洛沙姆407在体温下的成胶浓度(6%)。乙酰化乙二醇壳聚糖/泊洛沙姆复合水凝胶具有高度孔隙化的三维结构,其孔径大小处于10~60μm范围内,且表现出较高的力学性能。乙酰化乙二醇壳聚糖/泊洛沙姆复合水凝胶对抗癌药物吉西他滨具有缓释作用,载药凝胶的释药时间可达72 h。乙酰化乙二醇壳聚糖/泊洛沙姆复合水凝胶在可注射药物缓释载体方面具有重要的应用前景。     

Biopharmaceutical evaluation of diclofenac sodium controlled release tablets prepared from gum karaya--chitosan polyelectrolyte complexes

The phenomena of polymer interactions and formation of polyelectrolyte complexes (PECs) of oppositely charged polymers have been the focus of interest in fundamental and applied research. Such PECs may possess unique properties that are different from those of individual polymers. In the present study, attempts were made to prepare PECs of negative colloid gum karaya (GK) and positively charged polysaccharide chitosan (CH). The association and factors affecting the interactions between GK and CH were studied by pH and conductivity studies. The dried complexes were characterized by X-ray diffraction, Fourier transformed Infrared (FTIR) Spectroscopy, Scanning Electron Microscopy. The PECs were utilized for encapsulation of diclofenac sodium. Selected polyelectrolyte microparticles were compressed into tablets and were compared with commercial sustained release product Voveran SR?. Positive results of the study indicated the applicability of PECs in the design of oral controlled release drug delivery systems.     

Ondansetron-loaded chitosan microspheres for nasal antiemetic drug delivery: an alternative approach to oral and parenteral routes

Background: The aim of this study was to develop chitosan microspheres for nasal delivery of ondansetron hydrochloride (OND). Method: Microspheres were prepared with spray-drying method using glutaraldehyde as the crosslinking agent. Microspheres were characterized in terms of morphology, particle size, zeta potential, production yield, drug content, encapsulation efficiency, and in vitro drug release. Results: All microspheres were spherical in shape with smooth surface and positively charged. Microspheres had also high encapsulation efficiency and the suitable particle size for nasal administration. In vitro studies indicated that all crosslinked microspheres had a significant burst effect, and sustained drug release pattern was observed until 24 hours following burst drug release. Nasal absorption of OND from crosslinked chitosan microspheres was evaluated in rats, and pharmacokinetic parameters of OND calculated from nasal microsphere administration were compared with those of both nasal and parenteral administration of aqueous solutions of OND. In vivo data also supported that OND-loaded microspheres were also able to attain a sustained plasma profile and significantly larger area under the curve values with respect to nasal aqueous solution of OND. Conclusion: Based on in vitro and in vivo data, it could be concluded that crosslinked chitosan microspheres are considered as a nasal delivery system of OND.     

Controlled dual release of hydrophobic and hydrophilic drugs from electrospun poly(l-lactic acid) fiber mats loaded with chitosan microspheres

This work is to develop novel electrospun poly(l-lactic acid) (PLLA) fiber mats for controllable delivery of hydrophobic and hydrophilic drugs. For this aim, bovine serum albumin (BSA, used as a hydrophilic model drug) was firstly enveloped into chitosan microspheres by spray drying. Benzoin (used as a hydrophobic model drug) was directly dissolved in PLLA solution and then the chitosan microspheres were suspended into the PLLA solution, which was used to prepare PLLA fiber mats by electrospinning. Polyvinylpyrrolidone (PVP) was added into the PLLA solution to tune the drug release behaviors. The results showed that the chitosan microspheres were uniformly distributed in the fibers. BSA had a short-term release while benzoin had a long-term and sustained release in all the dual drug delivery systems, and the release of both hydrophobic and hydrophilic drugs could be adjusted by changing the ratio of PVP/PLLA.     

Preparation and characterisation of atorvastatin and curcumin‐loaded chitosan nanoformulations for oral delivery in atherosclerosis

Atorvastatin known to be a potential inhibitor of HMG‐CoA reductase involved in the synthesis of cholesterol. It is touted as miracle drug due to its profound effect in decreasing the low‐density lipoproteins in blood. Unfortunately, the high dosage used poses side‐effects relatively in comparison to other statins. On the other hand, curcumin has a diverse therapeutic potential in health and disease. However, the poor aqueous solubility and low bioavailability hinders the therapeutic potential of it when administrated orally. Therefore, it was thought to minimise the frequency of atorvastatin doses to avoid the possibility of drug resistance and also to overcome the limitations of curcumin for desirable therapeutic effects by using nanocarriers in drug delivery. In this investigation, synergistic effect of atorvastatin and curcumin nanocarriers was encapsulated by chitosan polymer. The chitosan nanocarriers prepared by ionic gelation method were characterised for their particle size, zeta potential, and other parameters. The drug‐loaded nanocarriers exhibited good encapsulation efficiency (74.25%) and showed a slow and sustained release of atorvastatin and curcumin 60.36 and 61.44%, respectively, in a span of 48 h. The drug‐loaded nanocarriers found to be haemocompatible and qualified for drug delivery in atherosclerosis.Inspec keywords: nanomedicine, drug delivery systems, diseases, cardiovascular system, enzymes, nanofabricationOther keywords: atorvastatin chitosan nanoformulation, curcumin‐loaded chitosan nanoformulation, oral delivery, atherosclerosis, potential inhibitor, HMG‐CoA reductase, cholesterol synthesis, miracle drug, low‐density lipoproteins, blood, diverse therapeutic potential, poor aqueous solubility, low bioavailability, drug resistance, nanocarriers, ionic gelation method, particle size, zeta potential, encapsulation efficiency     

Carbamazepine Modified Release Dosage Forms

Abstract

The preparation of sustained release dosage forms of Carbamazepine (anti-epileptic drug characterized by a very low water solubility and by a short half life on chronique dosing) was carried out.

These formulations were obtained in two different steps:

a) modified release granules were prepared by the loading of cross-linked sodium carboxymethylcellulose (swellable polymer), with the drug and an enteric polymer. Cellulose acetate phthalate, methacrylic acid – methacrylic acid methyl ester copolymer (usually employed as enteric coating agents) and cellulose acetate trimellitate (a new enteric polymer) were used in different weight ratios.

b) some sustained release dosage forms were prepared tabletting physical mixtures of the modified release granules with different weight ratios of hydroxypropylmethylcellulose.

In vitro dissolution tests of modified release granules in gastric fluid (USP XXI) showed a modulation of the drug release, while in intestinal fluid (USP XXI) a quick drug dissolution was observed.

In vitro dissolution tests of sustained release dosage forms, performed varying during the test, the pH of the dissolution medium, (hydrochloric acid pH 1 from 0 to 2 hours and phosphate buffer pH 6.8 from 2 to 18 hours) showed that the determining factors in the controlling release of the drug are: the type and amount of enteric polymer constituting the granules and the amount of hydroxy-propylmethylcellulose mixed with them.     

Controlled release of drug from folate-decorated and graphene mediated drug delivery system: Synthesis,loading efficiency,and drug release response

A novel folate-decorated and graphene mediated drug delivery system was prepared that involves uniquely combining graphene oxide (GO) with anticancer drug for controlled drug release. The nanocarrier system was synthesized by attaching doxorubicin (DOX) to graphene oxide via strong π–π stacking interaction, followed by encapsulation of graphene oxide with folic acid conjugated chitosan. The π–π stacking interaction, simplified as a non-covalent type of functionalization, enables high drug loading and subsequent controlled release of the drug. The encapsulated graphene oxide enhanced the stability of the nanocarrier system in aqueous medium because of the hydrophilicity and cationic nature of chitosan. The loading and release of DOX indicated strong pH dependence and imply hydrogen-bonding interaction between graphene oxide and DOX. The proposed strategy is advantageous in terms of targeted drug delivery and has high potential to address the current challenges in drug delivery. Thus, the prepared nanohybrid system offers a novel formulation that combines the unique properties of a biodegradable material, chitosan, and graphene oxide for biomedical applications.     

The effect of chitosan molecular weight on the characteristics of spray-dried methotrexate-loaded chitosan microspheres for nasal administration

In this article, the effect of the chitosan molecular weight (MW) on the characteristics of methotrexate (MTX)-encapsulated non-cross-linked chitosan microspheres was studied. Microspheres composed of low-molecular-weight (LMW, 40,000 Da), medium-molecular-weight (MMW, 480,000 Da) and high-molecular-weight (HMW, 850,000 Da) chitosan with the same degree of deacetylation (96%) were obtained by a simple spray-drying method. The MW of chitosan had a noticeable influence on the size distribution, encapsulation efficiency, micromeritic properties (angle of repose and bulk density), controlled release behavior, and mucoadhesive properties. The entrapment efficiencies were in the range of 90-99%. Spray-dried microspheres had a D(50) value of 3.3-4.9 microm, which was suitable for nasal insufflations. The microspheres with LMW chitosan have the best flowability and highest bulk density but were found to be poor in terms of adhesion and in controlling the release behavior of MTX. The MMW chitosan microspheres exhibited the strongest adhesion to the mucosal surface, and the angle of repose values were between 34 and 47 degrees. They could control the release rate by modifying the drug/polymer ratios. Microspheres with HMW chitosan exhibited a lower adhesion than MMW chitosan and a lower release rate of MTX. The physical state of MTX in the chitosan matrix was studied by differential scanning calorimetry, which indicated the presence of a solid dispersion of the amorphous drug in the chitosan matrix. Nasal ciliotoxity showed only minor cilia irritation due to the microspheres, and consequently, they are suitable for nasal drug delivery.