共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
语音参数编码在传输过程中受到干扰,合成语音会产生令人特别讨厌的刺耳尖叫声.FS-1016建议采用前向纠错汉明码(15,11)保护重要参数位,达到良好的听觉效果.文中针对纠错编码在FS-1016中的应用进行了详细介绍,用C语言编程实现.并用实例进行了仿真验证. 相似文献
3.
4.
5.
本文针对部分带宽噪声干扰、多址干扰和高斯白噪声等多种干扰以及Rician信道衰落存在环境下,编码与非编码的异步非相干MFSK调制混合DS-SFH扩频通信系统性能进行了分析、计算和比较。本文分析的编码为前向纠错编码,包括RS(N,K)码,带有分集的RS(N,K)码。与此同时分析和讨论了分集、Rician衰落以及部分带宽噪声干扰、多址干扰等对系统性能的影响,得到一些重要结果。 相似文献
6.
7.
自适应反馈前向纠错编码是八十年代初出现的一种新的差错控制编码技术,其特点是能根据信道干扰的强弱自动调节纠错码的冗余度,使码的纠错能力随时与信道的干扰特性相匹配,因而克服了传统使用的差错控制方式的缺点,既保证了通信的可靠性,同时又具有较高的通信效率.本文详述了自适应反馈前向纠错编码基本原理,分析了其性能,最后对这几种差错控制编码方式进行了比较. 相似文献
8.
9.
描述了光通信系统的不同连接码方案并进行了仿真,仿真结果显示采用硬解码方法可获得8dB的净编码增益,而采用迭代软解码获得的净编码增益可达到10dB。进一步分析了光通信系统的前向纠错净编码增益裕度的影响。 相似文献
10.
为了研究无线光通信中数字脉冲调制与信道编码的联合编码调制问题,在给出调制时域结构的基础上,采用理论推导和数值仿真相结合的方法,分析了基于二进制线性分组码的开关键控、数字脉冲位置调制和数字脉冲间隔调制系统的差错性能,得出了信道编码纠错能力与调制阶数的结合关系。结果表明,采用开关键控调制的系统,其汉明距离与欧式距离等价,故不存在调制与信道编码参量匹配问题;脉冲位置调制系统在纠错个数大于调制阶数时,可取得较明显的编码调制增益,当纠错个数能被调制阶数整除时,编码和调制达到匹配;由于数字脉冲间隔调制的符号时隙不固定,存在错误传播现象,不宜与差错编码联合使用。所得结果可为无线光通信链路的设计提供参考。 相似文献
11.
在现代数字通信系统中,纠错编码技术的作用是很重要的,本文以卷积码为例,分析了纠错码的原理,并利用matlab实现了卷积码的编码和解码,对卷积码纠错原理进行了仿真研究。 相似文献
12.
随着高速多媒体业务的迅速发展,如何提高第三代移动通信系统(3G)以及新一代移动通信系统(Beyond3G)的性能和容量愈发受到人们的重视。在业务无线接入时的服务质量(QoS)问题上,高效的纠错编码是必不可少且行之有效的解决方法之一。文中简要回顾了纠错码在前两代移动通信中的应用,并着重介绍了目前的研究热点——Turbo码和LDPC码的研究现状及发展前景。 相似文献
13.
在各类数字通信系统以及计算机存储和运算系统经常利用差错控制编码降低误码率,提高通信质量,满足对数据传输通道可靠性的要求。RS码是一种性能优良的前向纠错码,具有同时纠正随机错误和突发错误的能力,它的构造特点决定了其非常适合于纠正突发性错误。文中在阐述RS系统码编译码原理的基础上,提出了RS(16,12)缩短码的编译码方法,利用MATLAB对R S(16,12)缩短码在高斯信道和瑞利信道条件下的纠错能力进行仿真,并分析其纠错性能。 相似文献
14.
Gracie K. Hamon M.-H. 《Proceedings of the IEEE. Institute of Electrical and Electronics Engineers》2007,95(6):1228-1254
For decades, the de facto standard for forward error correction was a convolutional code decoded with the Viterbi algorithm, often concatenated with another code (e.g., a Reed-Solomon code). But since the introduction of turbo codes in 1993, much more powerful codes referred to collectively as turbo and turbo-like codes have eclipsed classical methods. These powerful error-correcting techniques achieve excellent error-rate performance that can closely approach Shannon's channel capacity limit. The lure of these large coding gains has resulted in their incorporation into a widening array of telecommunications standards and systems. This paper will briefly characterize turbo and turbo-like codes, examine their implications for physical layer system design, and discuss standards and systems where they are being used. The emphasis will be on telecommunications applications, particularly wireless, though others are mentioned. Some thoughts on the use of turbo and turbo-like codes in the future will also be given. 相似文献
15.
首先分析了卫星信道的突发错误特性对ATM信元的影响,介绍了应用于卫星通信系统中的纠错编码技术,指出将Turbo码作为卫星ATM网络的纠错码能取得较好的纠错效果,仿真结果证明了此结论。 相似文献
16.
17.
RS码在空空导弹遥测系统中的应用 总被引:1,自引:0,他引:1
为了增强空空导弹遥测系统抗误码能力,使遥测数据传输更为可靠,需要在遥测系统弹栽部分采用纠错编码技术。根据空空导弹遥测系统的特点采用RS码作为遥测系统纠错编码,分析了RS码的编码原理及实现方法,探讨了数据交织与解交织的原理,介绍了遥测系统中RS码的应用方法。实验证明,在设计能力范围内,Rs码可正确恢复遥测数据传输过程中产生的误码,完全满足设计需求。 相似文献
18.
This paper provides performance analyses of a broad spectrum of error-correcting codes in an antijam communication system under worst-case partial-band noise jamming conditions. These analyses demonstrate the coding advantages available for systems operating with and without frequency diversity. Utilizing both the exact approach (where possible) and upper-bounding approaches (Chernoff and union bounds), the decoded bit error rates for typical error-correcting codes (binary andM -ary, block and convolutional) have been obtained, and these codes have been compared according to theE_{b}/N_{0} required to achieve a bit error rate of 10-5. The best performance is achieved with the use ofM -ary signaling and optimum diversity withM -ary codes, such as Reed-Solomon block codes, dual-k convolutional codes, convolutional orthogonal codes, or concatenated codes. 相似文献
19.
数据在通讯传输和存储的过程中 ,采用纠错码技术可以保证数据的正确性。文中以 BCH[7,4 ,3]码为例 ,研究了循环纠错码的构造原理和电路结构 ,提出纠错码电路可以建立在纠错码基核单元的基础上 ,重构纠错码电路来实现有限系统资源的动态再利用。纠错码重构电路的研究可建立在嵌套式 GA理论模型上 ,采用迭代矩阵变换和有限状态机方式实现。 相似文献
20.
《Communications, IEEE Transactions on》1997,45(11):1349-1353
Reed-Solomon (RS) error-correcting codes are often proposed for communication systems requiring burst and/or erasure correction capabilities. In most cases, the modulation symbol size is fixed a priori. Therefore, the effective application of RS coding implies proper matching of the code symbol size with the modulation symbol size. Previous results have assumed that the RS codeword symbol size is an integer multiple of the modulation symbol size or have been based on simple approximations. In this paper, the exact symbol error probability with K-bit M-ary modulation symbols and q-bit RS codeword symbols is presented 相似文献