Thermodynamic properties of SrAl<Subscript>12</Subscript>O<Subscript>19</Subscript> and SrAl<Subscript>4</Subscript>O<Subscript>7</Subscript>

Strontium aluminates are important compounds with interesting properties such as long-duration phosphorescence and elastico-deformation luminescence. They have potential application in flexible light emitting panels. Since there are serious discrepancies in available thermodynamic data for these compounds, a redetermination of their Gibbs energies of formation was undertaken using solid-state electrochemical cells incorporating single-crystal SrF₂ as the electrolyte in the temperature range from 1000 to 1300 K. However, the measurements were restricted to SrAl₁₂O₁₉ and SrAl₄O₇ because of the formation of strontium oxyfluoride phase between SrAl₂O₄ and SrF₂. For the reactions, SrO + 6 Al₂O₃ → SrAl₁₂O₁₉, ΔG ^o/J mol^?1 (± 280) = ?83386 ? 25.744 (T/K), and SrO + 2Al₂O₃ → SrAl₄O₇, ΔG ^o/J mol^?1 (± 240) = ?80187 ? 25.376 (T/K). The high entropy of SrAl₄O₇ and SrAl₁₂O₁₉ can be partly related to their complex structures. The results of this study are consistent with calorimetric data on enthalpy of formation of other Sr-rich aluminates and indicate only marginal stability for SrAl₄O₇ relative to its neighbours, SrAl₁₂O₁₉ and SrAl₂O₄. The thermodynamic data explain the difficulty in direct synthesis of phase pure SrAl₄O₇ and the formation of SrAl₂O₄ as the initial ternary phase when reacting SrO and Al₂O₃ or crystallizing from amorphous state, irrespective of composition.     

Luminescence of SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Cr<Superscript>3+</Superscript>

Samples of SrAl₂O₄ and SrAl₂O₄:Cr³⁺ were prepared by mixing the powder materials SrCO₃, Al₂O₃, and Cr₂O₃. The crystal structures of the undoped and doped samples were analyzed by X-ray diffraction (XRD) measurements. The diffraction patterns reveal a dominant phase, characteristic of the monoclinic SrAl₂O₄ compound and another unknown secondary phase, in small amount, for doped samples. The data were fitted using the Rietveld method for structural refinements and lattice parameter constants (a, b, c, and β) were determined. Luminescence of Cr³⁺ ions in this host is investigated for the first time by excitation and emission spectroscopy at room temperature. Emission spectra present a larger band and a smaller structure associated to the and electronic transitions, respectively. The obtained results are analyzed by crystal-field theory and the crystal-field parameter, Dq, and Racah parameters, B and C, are determined from the excitation measurements.     

Synthesis and photoluminescence of Pb<Superscript>2+</Superscript> doped SrB<Subscript>2</Subscript>O<Subscript>4</Subscript>

Pure and Pb²⁺ doped SrB₂O₄ materials were prepared by a solution combustion synthesis method. The synthesized materials were characterized by using the powder XRD and FTIR. The photoluminescence properties of Pb²⁺ doped SrB₂O₄ materials were investigated using spectrofluorometer at room temperature. The emission and excitation bands of SrB₂O₄: Pb²⁺ was observed at 363 and 270 nm, respectively. The dependence of the emission intensity on the Pb²⁺ concentration for SrB₂O₄: Pb²⁺ was investigated and the critical Pb²⁺ concentration was determined The text was submitted by the authors in English.     

Er-Doped LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript>

LiMn_2-x Er_xO₄ (x ≤ 0.02) materials were synthesized by a rheological phase reaction method. The thermal behavior of the materials was examined by thermogravimetric and differential scanning calorimetry. X-ray diffraction showed that the samples (x ≤ 0.02 ) exhibited the same phase as the pure spinel. The lattice parameter of the Er-doped spinel was smaller than that of the undoped one and decreased with increasing doping level. Cyclic voltammograms showed two reversible processes corresponding to the typical response of spinel LiMn₂O₄ and revealed an insertion-extraction reaction occurring at two stages in the 4-V region. The electrochemical performances of the samples were studied and displayed a better reversibility and cyclability.__________From Neorganicheskie Materialy, Vol. 41, No. 6, 2005, pp. 740–743.Original English Text Copyright © 2005 by Haowen Liu, Li Song, Kelli Zhang.This article was submitted by the authors in English.     

Characterization and electrical properties of semiconducting Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-K<Subscript>2</Subscript>B<Subscript>4</Subscript>O<Subscript>7</Subscript> glasses

Semiconducting glasses of the Fe₂O₃-Bi₂O₃-K₂B₄O₇ system were prepared by the press-quenching method and their dc conductivity in the temperature range 223–393 K was measured. The glass transition temperature values (T_g) of the present glasses were larger than those of tellurite glasses. This indicates a higher thermal stability of the glass in the present system. The density for these glasses was consistent with the ionic size, atomic weight and amount of different elements in the glasses. Mössbauer results revealed that the relative fraction of Fe increases with increasing Fe₂O₃ content. Electrical conductivity showed a similar composition dependency as the fraction of Fe. The glasses had conductivities ranging from 10 to 10 Scm at temperatures from 223 to 393 K. Electrical conduction of the glasses was confirmed to be due to non-adiabatic small polaron hopping and the conduction was primarily determined by hopping carrier mobility.     

Reactions of V<Subscript>2</Subscript>O<Subscript>5</Subscript>, Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>, and Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> with AlN

Reactions of vanadium, niobium, and tantalum pentoxides with aluminum nitride have been studied using X-ray diffraction. At temperatures from 1000 to 1600°C, we have identified various V, Nb, and Ta nitrides. The composition of the niobium and tantalum nitrides depends on the reaction temperature. The tendency toward nitride formation becomes stronger in the order V₂O₅ < Ta₂O₅ < Nb₂O₅.     

Growth and properties of LiCu<Subscript>2</Subscript>O<Subscript>2</Subscript>-NaCu<Subscript>2</Subscript>O<Subscript>2</Subscript> crystals

Platelike Li_{1 ? x} Na _x Cu₂O₂ single crystals up to 2 × 10 × 10 mm in dimensions have been grown by slowly cooling (1 ? x)Li₂CO₃·xNa₂O₂·4CuO melts in alundum crucibles in air. Li_{1 ? x} Na _x Cu₂O₂ solid solutions in the LiCu₂O₂-NaCu₂O₂ system have been shown to exist in the composition range 0.78 < x < 1. The temperature stability ranges of NaCu₂O₂ and LiCu₂O₂ are 780–930 and 890–1050°C, respectively. The Mössbauer spectra and electrical conductivity of the crystals have been measured.     

Electrical conductivity of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-Tm<Subscript>2</Subscript>O<Subscript>3</Subscript>-Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> solid solutions

New solid solutions, Bi_2?x?y Tm _x Nb _y O_3+δ, with tetragonal and cubic structures have been synthesized in the Bi₂O₃-Tm₂O₃-Nb₂O₅ system, and their electrical conductivity has been measured at temperatures from 670 to 1020 K. The 1020-K conductivity of the tetragonal solid solution Bi_1.8Tm_0.15Nb_0.05O_3+δ is comparable to that of Bi_1.75Tm_0.25O₃, the best conductor in the Bi₂O₃-Tm₂O₃ system.     

Magnetic and microwave-absorbing properties of SrAl<Subscript>4</Subscript>Fe<Subscript>8</Subscript>O<Subscript>19</Subscript> powders synthesized by coprecipitation and citric- combustion methods

Al-substituted M-type hexaferrite is a highly anisotropic ferromagnetic material. In the present study, the coprecipitation and the citric-combustion methods of synthesis for SrAl₄Fe₈O₁₉ powders were explored and their microstructure, magnetic properties, and microwave absorptivity examined. X-ray diffraction (XRD), scanning electron microscopy (SEM), a vibrating sample magnetometer, and a vector network analyser were used to characterize the powders. The XRD analyses indicated that the pure SrAl₄Fe₈O₁₉ powder was synthesized at 900°C and 1000°C for 3 h by coprecipitation, but only at 1000°C for the citric-combustion processes. The SEM analysis revealed that the coprecipitation process yielded a powder with a smaller particle size, near single-domain structure, uniform grain morphology, and smaller shape anisotropy than the citric-combustion process. The synthesis technique also significantly affected the magnetic properties and microwave-absorptivity. Conversely, calcining temperature and calcining time had less of an effect. The grain size was found to be a key factor affecting the property of the powder. The powders synthesized by coprecipitation method at calcining temperature of 900°C exhibited the largest magnetization, largest coercivity, and best microwave absorptivity.     

Synthesis of MgAl<Subscript>2</Subscript>O<Subscript>4</Subscript> nanopowders

A procedure has been developed for the synthesis of MgAl₂O₄ nanopowders with a characteristic particle size of 10–40 nm. Translucent hydrous xerogels have been synthesized as precursors to MgAl₂O₄. The synthesized magnesium aluminum spinel nanopowders are promising for the fabrication of optical ceramics.     

EPR and photoluminescence properties of combustion-synthesized ZnAl<Subscript>2</Subscript>O<Subscript>4</Subscript>:Cr<Superscript>3+</Superscript> phosphors

An efficient red emitting ZnAl₂O₄:Cr³⁺ powder phosphor material was prepared at furnace temperatures as low as 500 °C by using the combustion method. The prepared powders were analyzed by X-ray diffraction and scanning electron microscopy techniques. The optical properties were studied using photoluminescence technique. The EPR spectra exhibit an intense resonance signal at g = 3.74 which is attributed to Cr³⁺–Cr³⁺ pairs, and the weak resonance signal of at g = 1.97 is attributed to Cr³⁺ single ion transition. The spin population (N) has been evaluated as a function of temperature. The excitation spectrum exhibits two broad bands in the visible region which are characteristic of Cr³⁺ ions in octahedral symmetry and the emission spectrum exhibits zero-phonon line frequencies along with vibronic frequencies. The crystal field parameter (Dq) and Racah parameters (B and C) have been evaluated and discussed.     

Temperature-stable and low loss Fe-containing dielectrics in BaO-Ln<Subscript>2</Subscript>O<Subscript>3</Subscript>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Ta<Subscript>2</Subscript>O<Subscript>5</Subscript> system

Polycrystalline samples of Ba₄Ln₂Fe₂Ta₈O₃₀ (Ln = La and Nd) were prepared by a high temperature solid-state reaction technique. The formation, structure, dielectric and ferroelectric properties of the compounds were studied. Both compounds are found to be paraelectrics with filled tetragonal tungsten bronze (TB) structure at room temperature. Dielectric measurements revealed that the present ceramics have exceptional temperature stability, a relatively small temperature coefficient of dielectric constant (τ _ε ) of −25 and −58 ppm/°C, with a high dielectric constant of 118 and 96 together with a low dielectric loss of 1.2 × 10⁻³ and 2.8 × 10⁻³ (at 1 MHz) for Ba₄La₂Fe₂Ta₈O₃₀ and Ba₄Nd₂Fe₂Ta₈O₃₀, respectively. The measured dielectric properties indicate that both materials are possible candidates for the fabrication of discrete multilayer capacitors in microelectronic technology.     

Y<Subscript>2</Subscript>O<Subscript>3</Subscript> and Nd<Subscript>2</Subscript>O<Subscript>3</Subscript> co-stabilized ZrO<Subscript>2</Subscript>-WC composites

Y₂O₃ + Nd₂O₃ co-stabilized ZrO₂-based composites with 40 vol% WC were fully densified by pulsed electric current sintering (PECS) at 1350 °C and 1450 °C. The influence of the PECS temperature and Nd₂O₃ co-stabilizer content on the densification, hardness, fracture toughness and bending strength of the composites was investigated. The best combination of properties was obtained for a 1 mol% Y₂O₃ and 0.75 mol% Nd₂O₃ co-stabilized composite densified for 2 min at 1450 °C under a pressure of 62 MPa, resulting in a hardness of 15.5 ± 0.2 GPa, an excellent toughness of 9.6 ± 0.4 MPa.m^0.5 and an impressive 3-point bending strength of 2.04 ± 0.08 GPa. The hydrothermal stability of the 1 mol% Y₂O₃ + 1 mol% Nd₂O₃ co-stabilized ZrO₂-WC (60/40) composites was compared with that of the equivalent 2 mol% Y₂O₃ stabilized ceramic. The double stabilized composite did not degrade in 1.5 MPa steam at 200 °C after 4000 min, whereas the yttria stabilized composite degraded after less than 2000 min. Moreover, the (1Y,1Nd) ZrO₂-WC composites have a substantially higher toughness (~9 MPa.m^0.5) than their 2Y stabilized equivalents (~7 MPa.m^0.5).     

Effect of Eu<Subscript>2</Subscript>O<Subscript>3</Subscript> doping on the crystallization behavior of BaO-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> glasses

We gave studied the crystallization behavior of 30BaO · 25Bi₂O₃ · 45B₂O₃ glasses doped with Eu₂O₃ to different levels. At a Eu₂O₃ content of 7 mol % or higher, the glasses undergo volume crystallization. The only precipitating phase is a solid solution between europium and bismuth oxides. With increasing europium concentration in the glass, the structure of the crystallites changes from cubic to rhombohedral. We have investigated the morphology, physicochemical properties, and luminescence spectra of the glasses and glass-ceramics.     

Thermodynamic Properties of FeNb<Subscript>2</Subscript>O<Subscript>6</Subscript> and FeTa<Subscript>2</Subscript>O<Subscript>6</Subscript>

Empirical calculational approaches have been used to evaluate the enthalpy, entropy, heat capacity, and melting point of iron(II) niobate and iron(II) tantalate and the coefficients A, B, and C in an equation for the temperature dependence of their heat capacity. The melting point of FeTa₂O₆ has been experimentally determined to be 1891 ± 5 K. The calculated heat capacity (C°_p (298.15 K)) of iron tantalate and the Gibbs energies of formation of FeN₂O₆ and FeTa₂O₆ have been compared to previously reported data.     

Preparation of magnetic composites through SrO-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-B<Subscript>2</Subscript>O<Subscript>3</Subscript> glass crystallization

Glasses with nominal compositions 11SrO · 5.5Fe₂O₃ · 4.5Al₂O₃ · 4B₂O₃ (1) and 15SrO · 5.5Fe₂O₃ · 4.5Al₂O₃ · 4B₂O₃ (2) were prepared by rapidly quenching oxide melts between counterrotating steel rollers. The glasses were then heat-treated in the range 650–950°C to produce glass-ceramic samples. The samples were characterized by X-ray diffraction, electron microscopy, and magnetic measurements. The phase composition of the glass-ceramics was determined, and their microstructure and magnetic properties were studied. The annealing temperature was shown to have a strong effect on the coercivity of the materials, which reaches 650 and 570 kA/m for compositions 1 and 2, respectively.     

Crystallization from high-temperature solutions in the K<Subscript>2</Subscript>O-P<Subscript>2</Subscript>O<Subscript>5</Subscript>-V<Subscript>2</Subscript>O<Subscript>5</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> system

We have studied general trends of crystallization from high-temperature solutions in the K₂O-P₂O₅-V₂O₅-Bi₂O₃ system at P/V = 0.5?2.0, K/(P + V) = 0.7?1.4, and Bi₂O₃ contents from 25 to 50 wt % and identified the stability regions of BiPO₄, K₃Bi₅(PO₄)₆, K₂Bi₃O(PO₄)₃, and K₃Bi₂(PO₄)_{3 ? x} (VO₄) _x (x = 0?3) solid solutions. The synthesized compounds have been characterized by X-ray powder diffraction and IR spectroscopy, and the structure of two solid solutions has been determined by single-crystal X-ray diffraction (sp. gr. C ₂/c): K₃Bi₂(PO₄)₂(VO₄), a = 13.8857(8), b = 13.5432(5), c = 6.8679(4) Å, β = 114.031(7)°; K₃Bi₂(PO₄)_1.25(VO₄)_1.75, a = 13.907(4), b = 13.615(2), c = 6.956(2) Å, β = 113.52(4)°.     

Broadband photoluminescence in the (CaO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript>):Eu system

Phosphors of the (CaO-Al₂O₃-SiO₂):Eu system obtained by direct solid-state synthesis in air at 1300°C produce broadband photoluminescence (PL) covering the entire visible range under excitation by a nitrogen laser. Upon vacuum annealing, the PL intensity in (CaO-Al₂O₃-SiO₂):Eu and (CaO-Al₂O₃-2SiO₂):Eu samples exhibits a several-fold increase and the latter phosphor yields blue emission according to the CIE color standard. The annealing of a (CaO-Al₂O₃):Eu composition leads to a change in the emission color from red (close to that according to the EBU scale) to blue (in the same scale). Vacuum-annealed (CaO-2Al₂O₃):Eu phosphor yields red emission (close to that according to the NTSC scale), while (2CaO-Al₂O₃):Eu composition exhibits intense purple luminescence.     

Synthesis of carbon nanotube,graphene, CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>, and NiFe<Subscript>2</Subscript>O<Subscript>4</Subscript> polypyrrole nanocomposites and study their microwave absorption

In this experimental work, different conductive polymer nanocomposites were synthesized using polypyrrole as conductive polymer and CoFe₂O₄, NiFe₂O₄, CNT and graphene as fillers. X-ray diffraction pattern was used to study the crystallinity of the products and it was found CoFe₂O₄, NiFe₂O₄, CNT, and graphene were successfully embedded in the polymer matrix. To further approve the synthesis of the nanocomposites, energy dispersive X-ray spectroscopy was served. Surface groups of the synthesized nanocomposites were studied by Fourier transform infrared and Raman spectroscopy. The morphology of the products was examined by scanning electron microscopy and transmission electron microscopy. It was found the fillers were successfully embedded in the polymer matrix and they were in nanometer scales. To investigate the magnetic properties and conductivity of the polymer nanocomposites, alternating gradient force magnetometer and four-point probe were used, respectively. Finally, the microwave absorption properties of the polymer nanocomposites were studied and it was found the fillers have different effects on the polymer microwave absorption value.     

Combusion synthesis,structural and photo-physical characteristics of Eu<Superscript>2+</Superscript> and Dy<Superscript>3+</Superscript> co-doped SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript> phosphor nanopowders

In this research, we reported the synthesis of Eu²⁺ and Dy³⁺ co-doped SrAl₂O₄ phosphor nanopowders with high brightness and long afterglow by urea-nitrate solution combustion synthesis (SCS) at 600 °C, followed by heating the resultant combustion ash at 1,200 °C in a weak reductive atmosphere (5% H₂ + 95% N₂). The broad-band UV-excited luminescence of the SrAl₂O₄: Eu²⁺, Dy³⁺ nanopowders was observed at λ _max = 517 nm due to transitions from the 4f⁶5d¹ to the 4f⁷ configuration of the emission center (Eu²⁺ ions). The excitation spectra consist of 240- and 254 nm broad peaks. Finally, it was found that the optimum ratio of urea is 2.5 times higher than theoretical quantities for the best emission condition of SrAl₂O₄: Eu²⁺, Dy³⁺ phosphor nanopowders.