Constraint finite‐time control of redundant manipulators

This work addresses the problem of the accurate task‐space control subject to finite‐time convergence. Dynamic equations of a redundant manipulator are assumed to be uncertain. Moreover, globally unbounded disturbances are allowed to act on the manipulator when tracking the trajectory by the end effector. Furthermore, the movement is to be accomplished in such a way as to optimize some performance index. Based on suitably defined task‐space non‐singular terminal sliding vector variable and the Lyapunov stability theory, we derive a class of inverse‐free robust controllers consisting of a Jacobian transpose component plus a compensating term, which seem to be effective in counteracting uncertain dynamics, unbounded disturbances and (possible) kinematic singularities met on the robot trajectory. The numerical simulations carried out for a redundant manipulator of a Selective Compliant Articulated Robot for Assembly (SCARA) type consisting of three revolute kinematic pairs and operating in a two‐dimensional task space illustrate performance of the proposed controllers. Copyright © 2016 John Wiley & Sons, Ltd.     

Adaptive tracking control of rigid manipulators using only position measurements

This article presents a new approach to trajectory tracking control of uncertain rigid manipulators using only position measurements. The proposed control strategy is an adaptive scheme that is very general and computationally efficient, requires virtually no information regarding the manipulator dynamic model, and is implementable without calculation of the robot inverse dynamics or inverse kinematic transformations. It is shown that the controller ensures semiglobal uniform boundedness of all signals in the presence of bounded disturbances, and that the ultimate size of the tracking errors can be made arbitrarily small. Additionally, it is demonstrated that the proposed strategy can be used as the basis for developing controllers for “cascaded” robotic systems, such as manipulators with significant actuator dynamics or joint flexibility. The efficacy of this approach to manipulator control is illustrated through both computer simulations and hardware experiments. © 1997 John Wiley & Sons, Inc.     

Adaptive tracking control of manipulators: Theory and experiments

This paper considers the trajectory tracking problem for uncertain robot manipulators and proposes two adaptive controllers as solutions to this problem. The first controller is derived under the assumption that the manipulator state is measurable, while the second strategy is developed for those applications in which only position measurements are available. The adaptive schemes are very general and computationally efficient since they do not require knowledge of either the mathematical model or the parameter values of the manipulator dynamics, and are implemented without calculation of the robot inverse dynamics or inverse kinematic transformation. It is shown that the control strategies ensure uniform boundedness of all signals in the presence of bounded disturbances, and that the ultimate size of the tracking errors can be made arbitrarily small. Experimental results are presented for a PUMA 560 manipulator and demonstrate that accurate and robust trajectory tracking can be achieved by using the proposed controllers.     

基于不确定逼近的机械手自适应鲁棒预测控制

针对具有参数不确定性和未知外部干扰的机械手轨迹跟踪问题提出了一种多输入多输出自适应鲁棒预测控制方法. 首先根据机械手模型设计非线性鲁棒预测控制律, 并在控制律中引入监督控制项; 然后利用函数逼近的方法逼近控制律中因模型不确定性以及外部干扰引起的未知项. 理论证明了所设计的控制律能够使机械手无静差跟踪期望的关节角轨迹. 仿真验证了本文设计方法的有效性.     

基于干扰观测器的机械臂广义模型预测轨迹跟踪控制

为实现对多自由度机械臂关节运动精确轨迹跟踪,提出一种基于非线性干扰观测器的广义模型预测轨迹跟踪控制方法。针对机械臂轨迹跟踪运动学子系统,采用广义预测控制（Generalized Predictive Control,GPC）方法设计期望的虚拟关节角速度。对于机械臂轨迹跟踪动力学子系统,考虑机械臂的参数不确定性和未知外界扰动,利用GPC方法设计关节力矩控制输入,基于非线性干扰观测器方法实时估计和补偿系统模型中的不确定性。在李雅普诺夫稳定性理论框架下证明了机械臂关节角位置和角速度的跟踪误差最终收敛于零的小邻域。数值仿真验证了所提出控制方法的有效性和优越性。     

Control-Based Solution to Inverse Kinematics for Mobile Manipulators Using Penalty Functions

This study offers the solution at the control feedback level to the inverse kinematics problem subject to state equality and inequality constraints for mobile manipulators. Based on the Lyapunov stability theory, a class of controllers generating the mobile manipulator trajectory whose attractor attained in a finite time, fulfills the above state constraints. The problem of both holonomic manipulability enforcement and collision avoidance is solved here based on an exterior penalty function approach which results in continuous mobile manipulator velocities near obstacles. The numerical simulation results carried out for a mobile manipulator consisting of a nonholonomic wheel and a holonomic manipulator of two revolute kinematic pairs, operating in both a constraint-free task space and task space including obstacles, illustrate the performance of the proposed controllers.     

Evolving an interval type-2 fuzzy PID controller for the redundant robotic manipulator

Robotic manipulators are a multi-input multi-output, dynamically coupled, highly time-varying, complex and highly nonlinear systems wherein the external disturbances, parameter variations, and random noise adversely affects the performance of the robotic system. Therefore, in order to deal with such complexities, however, an intriguing task for control researchers, these systems require an efficient and robust controller. In this paper, a novel application of genetic algorithms (GA) optimization approach to optimize the scaling factors of interval type-2 fuzzy proportional derivative plus integral (IT2FPD+I) controllers is proposed for 5-DOF redundant robot manipulator for trajectory tracking task. All five controllers' parameters are optimized simultaneously. Further, a procedure for selecting appropriate initial search space is also demonstrated. In order to make a fair comparison between different controllers, the tuning of each of the controllers' parameters is done with GA. This optimization technique uses the time domain optimal tuning while minimizing the fitness function as the sum of integral of multiplication of time with square error (ITSE) for each joint. To ascertain the effectiveness of IT2FPID controller, it is compared against type-1 fuzzy PID (T1FPID) and conventional PID controllers. Furthermore, robustness testing of developed IT2FPID controller for external disturbances, parameter variations, and random noise rejection is also investigated. Finally, the experimental study leads us to claim that our proposed controller can not only assure best trajectory tracking in joint and Cartesian space, but also improves the robustness of the systems for external disturbances, parameter variations, and random noise.     

Perfomance-based adaptive tracking control of robot manipulators

This article presents two new adaptive schemes for the motion control of robot manipulators. The proposed controllers are very general and computationally efficient because they do not require knowledge of either the mathematical model or the parameter values of the manipulator dynamics, and are implemented without calculation of the robot inverse dynamics or inverse kinematic transformation. It is shown that the control strategies are globally stable in the presence of bounded disturbances, and that in the absence of disturbances the ultimate bound on the size of the tracking errors can be made arbitrarily small. Computer simulation results are given for a PUMA 560 manipulator, and demonstrate that accurate and robust trajectory tracking can be achieved by using the proposed controllers. Experimental results are presented for an IMI Zebra Zero manipulator and confirm that the control schemes provide a simple and effective means of obtaining high-performance trajectory tracking. © 1995 John Wiley & Sons, Inc.     

An algorithmic approach to coordinate transformation for robotic manipulators

Coordinate transformation is one of the most important issues in robotic manipulator control. Robot tasks are naturally specified in work space coordinates, usually a Cartesian frame, while control actions are developed on joint coordinates. Effective inverse kinematic solutions are analytical in nature; they exist only for special manipulator geometries and geometric intuition is usually required. Computational inverse kinematic algorithms have recently been proposed; they are based on general closed-loop schemes which perform the mapping of the desired Cartesian trajectory into the corresponding joint trajectory. The aim of this paper is to propose an effective computational scheme to the inverse kinematic problem for manipulators with spherical wrists. First an insight into the formulation of kinematics is given in order to detail the general scheme for this specific class of manipulators. Algorithm convergence is then ensured by means of the Lyapunov direct method. The resulting algorithm is based on the hand position and orientation vectors usually adopted to describe motion in the task space. The analysis of the computational burden is performed by taking the Stanford arm as a reference. Finally a case study is developed via numerical simulations.     

Decentralized adaptive control of manipulators

This article presents two new adaptive schemes for motion control of robot manipulators. The first controller possesses a partially decentralized structure in which the control input for each task variable is computed based on information concerning only that variable and on two “scaling factors” that depend on the other task variables. The need for these scaling factors is eliminated in the second controller by exploiting the underlying topology of the robot configuration space, and this refinement permits the development of a completely decentralized adaptive control strategy. The proposed controllers are computationally efficient, do not require knowledge of either the mathematical model or the parameter values of the robot dynamics, and are shown to be globally stable in the presence of bounded disturbances. Furthermore, the control strategies are general and can be implemented for either position regulation or trajectory tracking in joint-space or task-space. Computer simulation results are given for a PUMA 762 manipulator, and these demonstrate that accurate and robust trajectory tracking is achievable using the proposed controllers. Experimental results are presented for a PUMA 560 manipulator and confirm that the proposed schemes provide simple and effective real-time controllers for accomplishing high-performance trajectory tracking. © 1994 John Wiley & Sons, Inc.     

Performance analysis for bounded persistent disturbances in PD/PID-controlled robotic systems with its experimental demonstrations

This paper is concerned with performance analysis of proportional-derivative/proportional-integral-derivative (PD/PID) controller for bounded persistent disturbances in a robotic manipulator. Even though the notion of input-to-state stability (ISS) has been widely used to deal with the effect of disturbances in control of a robotic manipulator, the corresponding studies cannot be directly applied to the treatment of persistent disturbances occurred in robotic manipulators. This is because the conventional studies relevant to ISS consider the H_∞ performance for robotic systems, which is confined to the treatment of decaying disturbances, i.e. the disturbances those in the L₂ space. To deal with the effect of persistent disturbances in robotic systems, we first provide a new treatment of ISS in the L_∞ sense because bounded persistent disturbances should be intrinsically regarded as elements of the L_∞ space. We next derive state-space representations of trajectory tracking control in the robotic systems which allow us to define the problem formulations more clearly. We then propose a novel control law that has a PD/PID control form, by which the trajectory tracking system satisfies the reformulated ISS. Furthermore, we can obtain a theoretical argument about the L_∞ gain from the disturbance to the regulated output through the proposed control law. Finally, experimental studies for a typical 3-degrees of freedom robotic manipulator are given to demonstrate the effectiveness of the method introduced in this paper.     

On the decoupling of position and force controllers in constrained robotic tasks

In hybrid control of robot manipulators separate controllers are designed for force and position errors control. Controllers are designed either in task or joint space and their outputs combine to provide input torque to the manipulator. Position and force controllers performance in a constrained robotic task is affected by their interaction to a degree dependent on the controller's ability to reject disturbances. Ideally, decoupling of the two control loops is desired to achieve the best performance in position and force directions. In this article, analysis of control loop interactions is performed for contact and noncontact phases, and controller design requirements are developed to achieve maximum decoupling. Design requirements involve output subspace of each controller leading to control discontinuities for contact and noncontact phases. In the noncontact phase, satisfaction of design requirements leads to a fully linearized and decoupled system. When in contact with the constraining surface, design requirements eliminate disturbances in the force loop, but minimize disturbances in the position loop to an extent dependent on force loop performance. Known hybrid control schemes analysis is performed to reveal existence of control loop interactions in these schemes. Confirmation of theoretical analysis is done through simulation of a three revolute planar manipulator. © 1998 John Wiley & Sons, Inc.     

Performance analysis of fractional order fuzzy PID controllers applied to a robotic manipulator

A two-link robotic manipulator is a Multi-Input Multi-Output (MIMO), highly nonlinear and coupled system. Therefore, designing an efficient controller for this system is a challenging task for the control engineers. In this paper, the Fractional Order Fuzzy Proportional-Integral-Derivative (FOFPID) controller for a two-link planar rigid robotic manipulator for trajectory tracking problem is investigated. Robustness testing of FOFPID controller for model uncertainties, disturbance rejection and noise suppression is also investigated. To study the effectiveness of FOFPID controller, its performance is compared with other three controllers namely Fuzzy PID (FPID), Fractional Order PID (FOPID) and conventional PID. For tuning of parameters of all the controllers, Cuckoo Search Algorithm (CSA) optimization technique was used. Two performance indices namely Integral of Absolute Error (IAE) and Integral of Absolute Change in Controller Output (IACCO) having equal weightage for both the links are considered for minimization. Numerical simulation results clearly indicate the superiority of FOFPID controller over the other controllers for trajectory tracking, model uncertainties, disturbance rejection and noise suppression.     

Robust adaptive fuzzy sliding mode trajectory tracking control for serial robotic manipulators

The ever increasingly stringent performance requirements of industrial robotic applications highlight significant importance of advanced robust control designs for serial robots that are generally subject to various uncertainties and external disturbances. Therefore, this paper proposes and investigates the design and implementation of a robust adaptive fuzzy sliding mode controller in the task space for uncertain serial robotic manipulators. The sliding mode control is well known for its robustness to system parameter variations and external disturbances, and is thus a highly desirable and cost-effective approach to achieve high precision control task for serial robots. The proposed controller is designed based on a fuzzy logic approximation to accomplish trajectory tracking with high accuracy and simultaneously attenuate effects from uncertainties. In the controller, the high-frequency uncertain term is approximated by using a fuzzy logic system while the low-frequency term is adaptively updated in real time based on a parametric adaption law. The control efficacy and effectiveness of the proposed control algorithm are comparatively verified against a recently proposed conventional controller. The test results demonstrate that the proposed controller has better trajectory tracking performances and is more robust against large disturbances than the conventional controller under the same operating conditions.     

A new class of adaptive controllers for robot trajectory tracking

This article presents a new class of adaptive schemes for the motion control of robot manipulators. The proposed controllers are very general and computationally efficient because they do not require knowledge of either the mathematical model or the parameter values of the manipulator dynamics, and are implemented without calculation of the robot inverse dynamics or inverse kinematic transformations. It is shown that the control strategies are globally uniformly bounded in the presence of bounded disturbances, and that in the absence of disturbances the ultimate bound on the size of the tracking errors can be made arbitrarily small. Computer simulation results are given for a PUMA 560 manipulator, and demonstrate that accurate and robust trajectory tracking can be achieved by using the proposed controllers. © 1994 John Wiley & Sons, Inc.     

Neural-network-based two-loop control of robotic manipulators including actuator dynamics in task space

A neural-network-based motion controller in task space is presented in this paper. The proposed controller is addressed as a two-loop cascade control scheme. The outer loop is given by kinematic control in the task space. It provides a joint velocity reference signal to the inner one. The inner loop implements a velocity servo loop at the robot joint level. A radial basis function network （RBFN） is integrated with proportional-integral （PI） control to construct a velocity tracking control scheme for the inner loop. Finally, a prototype technology based control system is designed for a robotic manipulator. The proposed control scheme is applied to the robotic manipulator. Experimental results confirm the validity of the proposed control scheme by comparing it with other control strategies.     

Robust adaptive control for mobile manipulators

This paper addresses the trajectory tracking control of a nonholonomic wheeled mobile manipulator with parameter uncertainties and disturbances. The proposed algorithm adopts a robust adaptive control strategy where parametric uncertainties are compensated by adaptive update techniques and the disturbances are suppressed. A kinematic controller is first designed to make the robot follow a desired end-effector and platform trajectories in task space coordinates simultaneously. Then, an adaptive control scheme is proposed, which ensures that the trajectories are accurately tracked even in the presence of external disturbances and uncertainties. The system stability and the convergence of tracking errors to zero are rigorously proven using Lyapunov theory. Simulations results are given to illustrate the effectiveness of the proposed robust adaptive control law in comparison with a sliding mode controller.     

A closed-loop jacobian transpose scheme for solving the inverse kinematics of nonredundant and redundant wrists

The solution of the inverse kinematic problem is of the utmost importance in robotic manipulator control. This article proposes a closed-loop scheme for solving the inverse kinematic problem for nonredundant and redundant wrists based on the computation of the Jacobian transpose. The manipulability measure is suitably introduced as a constraint for redundant wrists, by taking advantage of the null space of the Jacobian matrix. The resulting algorithm provides a computational tool to solve a specified orientation trajectory into a joint trajectory. Numerical results with two spherical wrists show the excellent performance of the scheme.     

Robust adaptive control of uncertain force/motion constrained nonholonomic mobile manipulators

In this paper, force/motion tracking control is investigated for nonholonomic mobile manipulators with unknown parameters and disturbances under uncertain holonomic constraints. The nonholonomic mobile manipulator is transformed into a reduced chained form, and then, robust adaptive force/motion control with hybrid variable signals is proposed to compensate for parametric uncertainties and suppress bounded disturbances. The control scheme guarantees that the outputs of the dynamic system track some bounded auxiliary signals, which subsequently drive the kinematic system to the desired trajectory/force. Simulation studies on the control of a wheeled mobile manipulator are used to show the effectiveness of the proposed scheme.     

On Adaptive Output Feedback Controf Robotic Manipulators with Online Disturbance Estimation

The problem of disturbance estimation and compensation for adaptive output feedback type controllers are investigated. Specifically two adaptive output feedback controllers designed for robotic manipulators are extended to compensate external disturbances which are common in robotic applications with repetitive task. The uncertain disturbance term in the robot dynamics is modeled as a fixed term plus a combination of sinusoidal signals. The overall stability and convergence of the tracking error for both controllers is ensured via Lyapunov based analysis. Extensive simulation studies are presented to illustrate the feasibility of the proposed method.