Comparative studies on the solvent extraction of transition metal cations by calixarene, phenol and ester derivatives

The ionophore solvent extraction of various alkali metal and transition metal cations from the aqueous phase to the organic phase was carried out by using diazo-coupling calix[n]arenes [p-(4-phenylazophenylazo)calix[4]arene (L1) and p-phenylazocalix[6]arene (L2)], phenol derivatives [2,6-dimethyl-3-phenylazophenol (L3), 2-(5-bromo-2-pyridylazo)-5-diethylamino phenol (L4), 2-chloro-4-nitro(phenylazo)-5-sec-butyl-2-phenol (L5) and 2-chloro-4-nitro(phenylazo)-5-tert-butyl-2-phenol (L6)], and ester derivatives [quinoline-8-benzoate (L7), phenyl-1,4-dibenzoate (L8), p-tolyltiobenzoate (L9)]. It was found that, all the compounds (L1-L9) examined showed selectivity for transition metal cations such as Ag+, Hg+ Hg2+, and poor efficiency for alkali metal cations (Na+ and K+). The best extraction efficiency was obtained with L1 and L4.     

Solvent extraction and stripping of silver ions in room-temperature ionic liquids containing calixarenes

We found that a calix[4]arene-bearing pyridine is soluble in a typical room-temperature ionic liquid (RTIL), 1-alkyl-3-methylimidazolium hexafluorophosphate. Pyridinocalix[4]arene showed a high extraction ability and selectivity for silver ions. The extraction performance of the calix[4]arene was greatly enhanced by dissolution in RTILs compared to in chloroform. In a competitive extraction test using five different metal ions (Ag+, Cu2+, Zn2+, Co2+, Ni2+), only silver ions were transferred by the calix[4]arene from the aqueous feed phase into the RTILs, through a cation-exchange mechanism. The pyridinocalix[4]arene was found to form a stable 1:1 complex with silver ions, both by slope analysis and by Job's method. Since it is easy to strip silver ions from RTILs by controlling the aqueous-phase pH, the extraction performance of calix[4]arene in RTILs was maintained after five repeated uses.     

A Calixarene-Based Fluorogenic Reagent for Selective Mercury(II) Recognition

The first calixarene-based fluorogenic Hg(II)-selective extractant, 5,11,17,23-tetrakis(1,1-dimethylethyl)-25,27-bis(N-(5-dimethylaminonaphthalene-1-sulfonyl)carbamoylmethoxy)-26,28-dimethoxycalix[4]arene (2), is reported. In solvent extraction from aqueous acidic solutions (HNO(3)), 2 exhibits excellent selectivity for Hg(II) over a wide range of transition, alkali, and alkaline earth metal cations. Quenching of its fluorescence due to Hg(II) coordination is unaffected by the presence of 100-fold excesses of alkali metal cations, alkaline earth metal cations, Ag(I), Tl(I), Cd(II), Co(II), Cu(II), Ni(II), Pb(II), Pd(II), Zn(II), or Fe(III).     

Preparation, characterization of cellulose-grafted with calix[4]arene polymers for the adsorption of heavy metals and dichromate anions

In this paper, the adsorbents were prepared from cellulose-grafted with calix[4]arene polymers (CGC[4]P-1 and CGC[4]P-2) and their sorption properties studied. The polymers were characterized by Fourier transform infrared spectroscopy, elemental analysis, thermal gravimetric analysis and scanning electron microscopy. They were then used to evaluate the sorption properties of some heavy metal cations (Co(2+), Ni(2+), Cu(2+), Cd(2+), Hg(2+) and Pb(2+)) and dichromate anions (Cr(2)O(7)(2-)/HCr(2)O(7)(-)). Results showed that CGC[4]P-2 was a good sorbent for heavy metal cations while CGC[4]P-1 was ineffective. In the studies of dichromate anion sorption, it was observed that CGC[4]P-2 was a more highly effective sorbent at pH 1.5 than was CGC[4]P-1.     

Sensitive and selective detection of mercury (II) based on the aggregation of gold nanoparticles stabilized by riboflavin

Gold nanoparticles (AuNPs) can be stabilized by riboflavin against tris buffer-induced aggregation. However, in the presence of mercury (II) (Hg2+), riboflavin can be released from the AuNPs surface and the riboflavin-Hg2+ complex formed, leading to the aggregation of AuNPs in tris buffer. The aggregation extent depends on the concentration of Hg2+. Based on the aggregation extent, a simple and sensitive method of determining Hg2+ is developed. The method enables the detection of Hg2+ over the concentration range of 0.02-0.8 microM, with a detection limit (3sigma) of 14 nM, and shows excellent selectivity for Hg2+ over other metal ions (Cu2+, Co2+, Cd2+, Pb2+, Mg2+, Zn2+, Ag+, Ce3+, Ca2+, Al3+, K+). More importantly, the method avoids complicated surface modifications and tedious separation processes.     

Ionizable (Thia)calix[4]crowns as highly selective 226Ra2+ ionophores

The 226Ra2+ selectivity of the ionizable (thia)calix[4]crowns 1-4 was determined in the presence of a large excess of the most common alkali and alkaline earth cations. Selective 226Ra2+ (2.9 x 10(-)(8) M) extraction occurs even at extremely high M(n+)/226Ra2+ ratios of 3.5 x 10(7) [M(n+) = Na+, K+, Rb+, Cs+, Mg2+, Ca2+, and Sr2+ (1M)] and an ionophore concentration of 10(-4) M. The selectivity coefficients log(K(Ra)(ex)/K(M)(ex)) are approximately 3.5 for Mg2+, Ca2+, and Sr2+. In the presence of Ba2+, which has very similar chemical properties, only the thiacalix[4]crown-6 derivative 4 showed a selectivity for 226Ra2+. In addition to the remarkable 226Ra2+ selectivities, the effective pH range (pH 8-13) of the thiacalix[4]crown dicarboxylic acids (3 and 4) allows for full regeneration of the ionophores at lower pH values (pH <6).     

An efficient one pot synthesis of water-dispersible calix[4]arene polyhydrazide protected gold nanoparticles--a "turn off" fluorescent sensor for Hg[II] ions

In the present study, we report the synthesis of aqueous stable gold nanoparticles by using calix[4]arene polyhydrazide (CPH) as both reducing and capping agents. The calix[4]arene polyhydrazide reduced gold nanoparticles (CPH-AuNps) were characterized by UV/Vis, particle size analyzer (PSA) and transmission electron mictroscopy (TEM). The records confirmed high stability of CPH-AuNps in aqueous solution over a long period of time and even at varied pH. Additionally, CPH-AuNps have been investigated for its application as "Turn Off" fluorescent sensor for Hg[II]. A concentration of Hg[II] in the limit of 10 nM to 10 microM can be detected based on fluorescence quenching of the CPH-AuNPs and it was also concluded from the spectroscopic data that CPH-AuNPs possess excellent selectivity to Hg[II] over several metal ions like Pb[II], Cu[II], Cd[II], Mn[II], Zn[II] and Ni[II].     

Removal of Zn(II), Cu(II), Ni(II), Ag(I) and Cr(VI) present in aqueous solutions by aluminium electrocoagulation

The performance of an electrocoagulation system with aluminium electrodes for removing heavy metal ions (Zn2+, Cu2+, Ni2+, Ag+, Cr2O7(2-)) on laboratory scale was studied systematically. Several parameters - such as initial metal concentration, numbers of metals present, charge loading and current density - and their influence on the electrocoagulation process were investigated. Initial concentrations from 50 to 5000 mg L(-1) Zn, Cu, Ni and Ag did not influence the removal rates, whereas higher initial concentrations caused higher removal rates of Cr. Increasing the current density accelerated the electrocoagulation process but made it less efficient. Zn, Cu and Ni showed similar removal rates indicating a uniform electrochemical behavior. The study gave indications on the removal mechanisms of the investigated metals. Zn, Cu, Ni and Ag ions are hydrolyzed and co-precipitated as hydroxides. Cr(VI) was proposed to be reduced first to Cr(III) at the cathode before precipitating as hydroxide.     

Estimation of chromium(VI) sorption efficiency of novel regenerable p-tert-butylcalix[8]areneoctamide impregnated Amberlite resin

The article describes a convenient synthesis and Cr(VI) extraction efficiency of a novel p-tert-butylcalix[8]areneoctamide impregnated Amberlite (XAD-4) resin. Using p-tert-butylcalix[8]arene macrocyclic building block, two strategies have been developed; i.e., derivatization of p-tert-butylcalix[8]arene framework with sophisticated ionophoric groups having efficiency to extract oxoanions from aqueous media and, impregnation of p-tert-butylcalix[8]arene derivative onto the polymeric support. Liquid-liquid and solid-liquid extraction experiments have been performed to evaluate the Cr(VI) extraction efficiency of both p-tert-butylcalix[8]arene derivative and the impregnated resin. From the results, it has been deduced that solid-phase extraction method is more convenient and efficient than liquid-liquid extraction process. The impregnated XAD-4 resin has been found regenerable with better extracting efficiency as compared to the simple p-tert-butylcalix[8]areneoctamide ionophore.     

Electrochemiluminescent detection of metal cations using a ruthenium(II) bipyridyl complex containing a crown ether moiety

The effects of metal ions on the electrochemiluminescence (ECL) properties of (bpy)2Ru(AZA-bpy) (bpy = 2,2'-bipyridine; AZA-bpy = 4-(N-aza-18-crown-6-methyl-2,2'-bipyridine) have been investigated. The electrochemistry, photophysics and ECL of Ru(bpy)3(2+) in the presence of Pb2+, Hg2+, Cu2+, and K+ are reported. The anodic oxidation of Ru(bpy)3(2+) produces ECL in the presence of tri-n-propylamine (TPrA) in 50:50 (v/v) CH3CN:H2O solution. Increases in ECL efficiency (photons generated per redox event) up to 20-fold that depend on both the concentration and nature of the metal ion have been observed, making this an interesting system for electrochemiluminescence metal ion sensing.     

Lead (II) ion detection in surface water with pM sensitivity using aza-crown-ether-modified silver nanoparticles via dynamic light scattering

In this paper, we reported ultrasensitive lead ion detection in environmental water with pM sensitivity using aza-crown-ether-modified silver nanoparticles (ACE-Ag NPs) through dynamic light scattering (DLS). The colorimetric method based on ACE-Ag NPs is not capable of detecting Pb2+ ions over other metal ions (Fe3+, Co2+, Cu2+, Hg2+, Cd2+, Ag+, Li+, Na+, K+ and Cs+) with high sensitivity. But DLS has improved the selectivity and sensitivity of the Pb2+ detection system (50-fold or more) over colorimetric method, and its detection limit is 0.25 pM (1.03 ppt). The Pb2+ DLS assay can be applied to detect Pb2+ in the environmental water, such as in Yangtze and East Lake water samples with a detection limit of 0.20 and 0.22 pM, which is much lower than the maximum contamination level of 4.8×10(-8) M for lead in surface water defined by the national environmental quality standards of China (GB 3838-2002). Also, this method has a good performance in the determination of Pb2+ in drinking water, which is much lower than the maximum contamination level (MCL) of 72 nM for lead as defined by the US Environmental Protection Agency (EPA).     

Thiacalix[4]arene derivatives as extractants for metal ions in aqueous solutions: Application to the selective facilitated transport of Ag(I)

The complexation abilities of different thiacalix[4]arene derivatives towards some rare earth metal ions, metallic pollutants, and noble metals have been investigated in liquid–liquid experiments. Thiacalix[4]arene dissolved in chloroform effectively extracts Pd(II) (in acidic chloride media) and also Ag(I), Cd(II), Sm(III) and Ce(III), all buffered at pH 6 or 8. The modification of this compound to form an amide derivative results in an effective extraction of noble metals, ranked according to Au(III) > Pd(II) > Pt(IV) > Ag(I). Moreover, a supported liquid membrane system for silver transport has been developed based on thiacalix[4]arene dissolved in NPOE, and parameters affecting its efficiency have been investigated, such as the stripping composition and the pH of the feed solution. Finally, the selectivity of the membrane system has been evaluated by using as feed sources mixtures of silver and other metal ions.     

Synthesis and metal ion binding properties of thiaaza crown macrocycles

Two new macrocyclic ligands (3) and (4), containing nitrogen-sulfur donor atoms, were designed and synthesized in a multi-step reaction sequence. The macrocycles (3) and (4) were used in solvent extraction of metal picrates such as Ag(+), Hg(2+), Cd(2+), Zn(2+), Cu(2+), Ni(2+), Mn(2+), Co(2+), and Pb(2+) from aqueous phase to the organic phase. The metal picrate extractions were investigated at 25+/-0.1 degrees C by using UV-visible spectrometry. The extractability and selectivity of the mentioned metal picrates were evaluated according to the organic solvents. The values of the extraction constants (logK(ex)) and the complex compositions were determined for the extracted complexes.     

Impedimetric immobilized DNA-based sensor for simultaneous detection of Pb2+, Ag+, and Hg2+

An unlabeled immobilized DNA-based sensor was reported for simultaneous detection of Pb(2+), Ag(+), and Hg(2+) by electrochemical impedance spectroscopy (EIS) with [Fe(CN)(6)](4-/3-) as redox probe, which consisted of three interaction sections: Pb(2+) interaction with G-rich DNA strands to form G-quadruplex, Ag(+) interaction with C-C mismatch to form C-Ag(+)-C complex, and Hg(2+) interaction with T-T mismatch to form T-Hg(2+)-T complex. Circular dichroism (CD) and UV-vis spectra indicated that the interactions between DNA and Pb(2+), Ag(+), or Hg(2+) occurred. Upon DNA interaction with Pb(2+), Ag(+), and Hg(2+), respectively, a decreased charge transfer resistance (R(CT)) was obtained. Taking advantage of the R(CT) difference (ΔR(CT)), Pb(2+), Ag(+), and Hg(2+) were selectively detected with the detection limit of 10 pM, 10 nM, and 0.1 nM, respectively. To simultaneously (or parallel) detect the three metal ions coexisting in a sample, EDTA was applied to mask Pb(2+) and Hg(2+) for detecting Ag(+); cysteine was applied to mask Ag(+) and Hg(2+) for detecting Pb(2+), and the mixture of G-rich and C-rich DNA strands were applied to mask Pb(2+) and Ag(+) for detecting Hg(2+). Finally, the simple and cost-effective sensor could be successfully applied for simultaneously detecting Pb(2+), Ag(+), and Hg(2+) in calf serum and lake water.     

A novel heterogeneous colorimetric and spectrophotometric chemosensor for detection and adsorption of Hg0 and Hg2+

Functionalized mesoporous silica with an immobilized azobenzene-coupled receptor 1 (FMS-1) as heterogeneous "naked-eye" colorimetric and spectrophotometric chemosensor was prepared by sol-gel reaction. The optical sensing ability of FMS-1 was studied by addition of metal ions such as K+, Ca2+, Sr2+, Co2+, Cd2+, Pb2+, Zn2+, Fe3+, Cu2+ and Hg2+ in aqueous solution. Interestingly, upon the addition of Hg2+ in aqueous suspension, FMS-1 resulted in a color change from maroon to red within 10 s. On the other hand, no significant color changes were observed with the other metal ions. These findings confirm that FMS-1 can be useful as a chemosensor for selective detection of Hg2+ over a range of metal ions. Furthermore, the adsorption ability of the FMS-1 was also estimated by measuring the amount of Hg2+ and Hg0 adsorbed on the FMS-1, resulting in 95% for Hg2+ and 75% for Hg0, respectively, suggesting that the FMS-1 is potentially useful as the adsorbent for separation of Hg0 and Hg2+ in chromatography.     

Metal ion (silver, cadmium and zinc ions) modified CdS quantum dots for ultrasensitive copper ion sensing

Metal ion (Ag(+), Cd(2+), Zn(2+)) modified CdS quantum dots (QDs) were synthesized and used for Cu(2+) sensing. Modification by these metal ions could enhance the PL intensity of CdS QDs with the extent of the PL enhancement being related to the concentration of the metal ions. Different metal ion (Ag(+), Cd(2+), Zn(2+)) modified CdS QDs also showed different analytical characteristics for Cu(2+) sensing. In particular, Ag( + ) modified CdS QDs showed greatly enhanced sensitivity for Cu(2+) determination than did the unmodified CdS QDs. A limit of detection (LOD) of 2.0 × 10(-10) M was obtained for Ag(+) modified CdS QDs, which is the lowest LOD obtained using QDs as fluorescence probes for Cu(2+) sensing. This study demonstrates the important role of surface state of QDs in fluorescence sensing.     

苯并[a]芘在表面负载不同金属离子的SY-6活性炭上的脱附活化能

主要研究了苯并[a]芘在金属离子改性活性炭表面的脱附活化能,程序升温脱附实验测定了苯并[a]芘在Fe3+,Zn2+和Ag+等金属改性活性炭上的脱附活化能,并应用软硬酸碱理论分析和讨论了其脱附活化能的差异。结果表明,苯并[a]芘在改性活性炭上脱附活化能的顺序如下:Ag(Ⅰ)/ACACZn(Ⅱ)/ACFe(Ⅲ)/AC。和原始活性炭相比,Ag+增强了苯并[a]芘和活性炭表面间的结合力,Zn2+和Fe3+减弱了苯并[a]芘和活性炭表面间的结合力,并首次用软硬酸碱理论解释了试验结果。     

PAAS高吸水树脂对重金属离子盐溶液的吸液及吸附性能

用聚丙烯酸高吸水树脂(PAAS)研究了单一和混合重金属离子硝酸盐溶液中的吸液和吸附性能.在Pb2 、Ni2 、Cd2 、Zn2 、Mn2 和Cu2 的一、二元溶液中,PAAS的吸液倍率随时间延长而增加,约50min达吸液平衡,一元金属离子溶液中平衡吸液倍率为160～190g/g,而对Cr3 溶液,最大为120g/g;二元金属离子混合溶液中平衡吸液倍率都在150～180g/g之间,有Cr3 存在时平衡吸液倍率最小.对上述单一金属离子的吸附量随时间延长而增加,约180min达吸附平衡,平衡吸附量顺序为:Pb2 ＞Cd2 ＞Ni2 ＞Cu2 ＞Zn2 ＞Mn2 ＞Cr3 .对二元混合金属离子溶液,吸附量随时间增加而增加,30min后逐渐变慢,约70min后达吸附平衡.     

Ion-induced manipulation of photochemical pathways in crown ether compounds based on fluorinated oligophenylenevinylenes: the border between ultrafast photoswitches and photoproduced nanomaterials

The photochemical and photophysical properties of the crown ethers trans,trans-1,4-bis[2-(3',4'-benzo 15-crown 5)ethenyl]-2,3,5,6-tetrafluorobenzene (1) and trans,trans-1,4-bis[2-(3',4'-benzo 18-crown 6) ethenyl]-2,3,5,6-tetrafluorobenzene (2) were investigated in the absence and presence of groups I and II metal ions. The photophysical methods used include steady state flurescence, uv spectroscopy, and ultrafast transient absorption spectroscopy. Both compounds showed solvatochromic behavior, due to intramolecular charge transfer state formation, and efficient fluorescence in polar solvents. Photophysical behavior was dependent on the metal ion. The addition of metal ions that completely fit into the crown ether cavity resulted in significant blue shifts in the fluorescence emission spectra (chemosensing properties). Partially fitting ions changed the fluorescence spectra slightly. Transient absorption measurements revealed fast and slow decay components with time constants of 10-20 and 500-600 ps for all fitting ions, respectively. The latter is assigned to a trans-cis photoisomerization process, which decreased in efficiency in the presence of partially fitting ions, i.e., increasing ion size. Steady state irradiation showed clear evidence of a change in the absorption spectra. Trans-cis photoisomerization and [2 + 2] photocycloaddition were found to compete with fluorescence. The ions Li+, Na+, and Ca2+, which fit into the cavity, direct the photoisomerization. Larger ions (K+, Rb+, Sr2+ and Ba2+) that partially fit the cavity cause photocycloaddition. Quantum yields of the photoreaction are between 0.1 and 0.3. Analysis of the photo-product obtained for the 1-Sr2+ system revealed a compound with a molecular weight of nanosize dimension, which was equivalent to seven mass units of 1. The higher molecular weight product was formed due to alternately stacked supramolecular assemblies.     

Evaluation of binding selectivities of caged crown ligands toward heavy metals by electrospray ionization/quadrupole ion trap mass spectrometry

Electrospray ionization (ESI)/quadrupole ion trap mass spectrometry is used to evaluate the heavy metal binding selectivities of five caged crown ethers and two polyether reference compounds in methanol solution. The binding preferences for Hg2+, Pb2+, Cd2+, and Cu2+ were analyzed by comparison of ESI mass spectral intensities with the aim of developing this method for the rapid screening of binding selectivities of new synthetic ligands. The cage compounds preferentially bind Hg2+, except for the cage cryptand derivative, which favors Pb2+. The preference for Hg2+ stems from the favorable positioning of the nitrogen or sulfur atoms for linear coordination of Hg2+, whereas the cryptand derivative favors Pb2+ because of its larger cavity size. The counterions of the metal salts influence the type of complexes observed in the ESI mass spectra because the strengths of the metal-anion bonds affect retention of the anion in the complexes.