Polymer-assisted freeze-drying synthesis of Ag-doped ZnO nanoparticles with enhanced photocatalytic activity

Ag-doped ZnO nanoparticles with high and stable photocatalytic activity were prepared by polymer-assisted freeze-drying method with simple process and without organic solvents used. The structural morphology and optical properties of Ag-doped ZnO nanoparticles were characterized by X-ray Diffraction (XRD), Inductive Coupled Plasma Optical Emission Spectrometry (ICP-OES), Field Emission Scanning Electron Microscopy (FESEM), Transmission Electron Microscopy (TEM) and high resolution TEM (HRTEM) with energy dispersive X-ray spectroscopy, Ultraviolet-visible Diffuse Reflectance Spectroscopy (UV–vis DRS), X-ray Photoelectron Spectroscopy (XPS) and Fourier Transmission Infrared Spectroscopy (FTIR). Moreover, the thermoanalytical measurements (TGA–DTG) analysis is carried out for proper calcination temperature. XRD results show that Ag nanoparticles were successfully doped into ZnO lattice, and UV–vis DRS results indicate that the doped Ag nanoparticles result in ZnO exhibiting enhanced light trapping capability in the 400?nm and 600?nm range. The photocatalytic activity of Ag-doped ZnO was examined by analyzing the degradation of methyl orange (MO) and methylene blue (MB) dyes under UV light and solar light irradiation, and the results show that all Ag-doped ZnO nanoparticles exhibit better photocatalytic activity than those of pure ZnO nanoparticles at the same degradation conditions; especially the synthesized Ag-ZnO nanoparticles are easy to be recycled and have high photocatalytic stability. Based on the experimental results, the photocatalytic electron transfer path and the photocatalytic mechanism of Ag-ZnO nanoparticles under UV and solar irradiation conditions are explained and clarified.     

Efficient sunlight and UV photocatalytic degradation of Methyl Orange,Methylene Blue and Rhodamine B,using Citrus×paradisi synthesized SnO2 semiconductor nanoparticles

In this work, tin dioxide (SnO2) Nanoparticles (NPs) were synthesized through green synthesis, using Citrus × paradisi extract as a stabilizing (capping). The extract concentrations used were 1, 2 and 4% in relation to the aqueous solution. The resulting SnO2 NPs were used for the degradation of Methyl Orange (MO), Methylene Blue (MB) and Rhodamine B (RhB), under both solar and UV radiation. The NPs were characterized via Attenuated Total Reflectance Infrared Spectroscopy (ATR-IR), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM-SAED), the Brunauer-Emmett-Teller (BET) theory, Ultraviolet to Visible spectroscopy (UV–Vis), and Photoluminescence spectroscopy (PL); while the photocatalytic degradation was evaluated using UV-VIS. The results showed that the Citrus × paradisi extract is a good medium for the formation of SnO2 NPs. These NPs presented quasi-spherical morphology, particle sizes of 4–8 nm, with a rutile phase crystalline structure, and with banned gap of 2.69 at 3.28 eV. The NPs had excellent photocatalytic properties under solar radiation, degrading 100% of the OM in 180 min. Furthermore, under UV radiation, 100% degradation of the three dyes was achieved in a short time; 20 min for MO, and 60 min for MB and RhB. Therefore, green synthesis is a feasible medium for the formation of SnO2 NPs with good photocatalytic properties.     

Enhancement in the photocatalytic and antimicrobial properties of ZnO nanoparticles by structural variations and energy bandgap tuning through Fe and Co co-doping

In this study, pure ZnO and iron (Fe) and cobalt (Co) co-doped ZnO nanoparticles were synthesized by varying Fe and Co concentrations using the co-precipitation method. The physical properties of as-prepared samples were investigated through XRD, FTIR, SEM, and UV–vis spectroscopy. X-ray diffraction confirmed the strong influence of Fe and Co ions on structural parameters without disturbing the basic ZnO hexagonal structure. The microstructural study was executed by using the Scherrer, W–H, and SSP methods. FTIR confirmed the presence of Zn–O, and Zn–M–O (M = Fe, Co) vibrational modes, which further confirmed the successful incorporation of dopants ions. The energy bandgap (E_g) extracted from UV–vis spectra has shown red-shift (3.37–2.7 eV) for decreasing Fe contents, whereas blue-shift (3.37–3.39 eV) for increasing Co concentration. SEM was used to investigate surface morphology, which represents the high rate of agglomeration. The photocatalytic test was performed on grown samples against various dyes and also observed the effects of varying concentrations of Fe and Co ions. The maximum degradation efficiency (98.8%) at 6%Fe and 4%Co under direct sunlight in 60 min against methylene blue (MB) was achieved. The photocatalytic activity of optimized concentration (6%Fe and 4%Co) was further tested against cresol red (CR), methyl orange (MO), safranin-O (SO), rhodamine-B (RhB), and methyl red (MR) dyes. The maximum degradation efficiency against MR dye (96.0%) was observed. The antibacterial test against Staphylococcus aureus and Klebsiella pneumoniae bacterial strains have shown that co-doped ZnO nanoparticles have a higher activity as compared to pristine ZnO, and furthermore, the sample with 6%Fe and 4%Co concentration exposed the highest antibacterial actively for both bacterial strains.     

Generation of mesoporous n-p-n (ZnO–CuO–CeO2) heterojunction for highly efficient photodegradation of micro-organic pollutants

In this research, a mesoporous rod-shaped ZnO/CuO/CeO₂ n-p-n heterojunction has been designed via a two-step co-precipitation technique for photocatalytic applications. Characterization by powder X-ray diffraction (PXRD), fourier transform infrared spectroscopy (FTIR), UV–Vis, and Scanning Electron Microscopy (SEM) techniques confirmed the formation of mesoporous rod-shaped ZnO/CuO/CeO₂ n-p-n heterojunction having preferred interface developing between the ZnO, CuO, and CeO₂ phases, thus extended the light-absorption window up to 800 nm. Under sunlight, the ability of a mesoporous ZnO/CuO/CeO₂ n-p-n heterojunction to act as a photocatalyst was tested with methyl orange (MO) and crystal violet (CV) as target molecules. We found the degradation efficiencies of CV and MO dyes on mesoporous ZnO/CuO/CeO₂ to be 96% and 88%, respectively, after 90 min of sunlight irradiation. The estimated rate constants (k, min^?1) for deterioration of CV and MO under sunlight over ZnO/CuO/CeO₂ composite were 0.039 and 0.022 min^?1, respectively. We endorsed the greater photo-response, the well-aligned band-structure, and practical usage of the photo-induced carriers of the mesoporous photocatalyst to be the leading causes for the outstanding photocatalytic properties of ZnO/CuO/CeO₂ n-p-n heterojunction. The ultimate oxidizing species that destroyed dyes were O₂￣ and ·OH over ZnO/CuO/CeO₂ photocatalyst under sunlight illumination. Besides, the recycling tests confirmed the high photostability of the ZnO/CuO/CeO₂ photocatalyst. Hopefully, the mesoporous rod-shaped architecture of the n-p-n heterojunction with anticipated interface manufacturing will assist the photocatalyst strategy with better photocatalytic action under sunlight irradiation.     

Green synthesis,characterization and antimicrobial activity of carbon quantum dots-decorated ZnO nanoparticles

In this research, ZnO nanoparticles (ZnO NPs) and Carbon Quantum Dots-decorated ZnO nanoparticles (ZnO/CQDs NCs) were prepared via different procedures and precursors. Soya chunk was applied as a source of carbon for the preparation of CQDs. Crystalline structure, purity, size, and morphological properties of products were investigated via X-ray diffraction (XRD) analysis, energy dispersive spectroscopy (EDS), Transmission Electron Microscopy (TEM), FT-IR, and Scanning Electron Microscopy (SEM) respectively. Findings showed that homogeneity, size, and morphological properties of products can be intensively affected via different precursors and procedures. From the homogeneity, size, and morphological point of view, the hydrothermal route, ammonia, 5 h, and 180 °C were the optimum procedure, pH adjuster, temperature, and time respectively. Optimum product was applied for carrying out minimum inhibitory concentration (MIC) and Agar disk-diffusion tests against various microorganisms. Results demonstrated that prepared ZnO NPs have maximum antibacterial activity against Staphylococcus aureus (19.53 μg/ml) and ZnO/CQDs NCs have no inhibitory effect against tested microorganisms. For ZnO NPs, the disk diffusion test proved that the highest growth inhibition zone was related to Staphylococcus aureus (15 mm). The presence of CQDs in ZnO/CQDs NCs reduces the inhibitory effect of ZnO NPs intensively.     

Photocatalytic degradation of Rhodamine B dye under UV/solar light using ZnO nanopowder synthesized by solution combustion route

Nano-sized ZnO powder with crystallite size in the range 12 to 50 nm were prepared by solution combustion route. The product was characterized by powder X-ray diffraction (PXRD), scanning electron microscope (SEM) and Fourier transform infrared spectroscopy (FTIR). Photocatalytic degradation of rhodamine B (RB) dye was carried out with ZnO nanopowder. The effect of parameters such as the crystallite size, amount of catalyst, concentration of the dye, pH and irradiation on photocatalytic degradation of RB is studied. The results reveal that the maximum decolorization (more than 95%) of dye occurred with ZnO catalyst in 8 min of stirring at basic pH under solar light irradiation. It was also found that chemical oxygen demand (COD) reduction takes place at a faster rate under solar light as compared to that of UV light. The results suggest that, the ZnO solar photocatalytic irradiation is better than the calcined ZnO/solar and UV light irradiation.     

Construction of BiVO4 microspheres sensitized TiO2 NTAs for the enhanced photocatalytic mineralization of organic dyes

In the present work, BiVO₄ microspheres were deposited on TiO₂ NTAs via the solvothermal method using urea as the mineralizer. The binary heterojunction formation significantly enhanced the solar response region and intensity, and the electron transfer path was built at the interface of two semiconductors, which was the main reason for the enhanced photoelectrochemical and photocatalytic performances. The S-2 electrode prepared with urea concentration of 2 mol/L displayed the high visible light photocurrent of 73.76 μA/cm² and photovoltage of −0.30 V. Furthermore, the S-2 photocatalyst also showed excellent photocatalytic decoloration ability of MO, RhB and MB dyes, and the corresponding decomposition efficiencies were 55.82%, 41.62% and 89.90% under solar irradiation. Except for the organic dyes, Cr(VI) ions also could be reduced into Cr(III), and the photocatalytic efficiency achieved 74.05% after 3 h solar irradiation. The active group and photocatalytic mechanism were proposed to illuminate the essential reason. The experimental results indicated that the novel BiVO₄/TiO₂ NTAs with binary heterojunction are attractive photocatalysts for the dyeing and printing water treatment.     

Fabrication of multifunctional TiO2–fly ash/polyurethane nanocomposite membrane via electrospinning

In this study, we demonstrate the fabrication of multifunctional composite polyurethane (PU) membrane from a sol gel system containing TiO₂ and fly ash (FA) nanoparticles (NPs). The adsorptive property of FA and photocatalytic property of TiO₂ can introduce different functionalities on PU mat for water purification. Different types of PU nanofiber mats were prepared by varying the composition of NPs in blend solution. FE-SEM, TEM, TGA, XRD, UV–visible spectra, and water contact angle measurement confirmed the incorporation of FA and TiO₂ NPs on/into PU nanofibrous mat. The influence of NPs on PU membrane was evaluated from the adsorption of heavy metals (Hg, Pb), removal of dyes (methylene blue), antibacterial activity, and water flux. The improvement of all these activities is attributed to the adsorptive property of FA and photocatalytic/hydrophilic property of TiO₂ NPs. Therefore, as-synthesized composite membrane can be utilized as an economically friendly filter media for water purification.     

Pulsed laser ablation in liquid synthesis of ZnO/TiO2 nanocomposite catalyst with enhanced photovoltaic and photocatalytic performance

In this work, we employed an impurity-free nanoparticle synthesis technique, known as pulsed laser ablation in liquid (PLAL), to integrate titanium dioxide nanoparticles (TiO₂ NPs) into zinc oxide nanorods (ZnO NRs) with varying relative proportions. The main objective of this integration was to enhance the charge carrier separation of photo-generated electron hole pairs during solar irradiation. For the synthesis process, an Nd:YAG laser at 532 nm wavelength was applied as an ablation source, along with deionized water as a solvent medium in which the precursor materials were dispersed prior to laser irradiation. The nanocomposites were characterized by X-ray diffraction (XRD), UV–vis absorption and in-situ Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HR-TEM) and field emission scanning electron microscopy (FE-SEM). The synthesized nanocomposites were primarily utilised in two applications: firstly, as a catalyst in the degradation of methyl orange (MO) and secondly, as photo-anode in dye sensitized solar cell (DSSC). Our research has demonstrated that optimal performance was obtained for the nanocomposite containing 10% and 90% (by weight) TiO₂ NPs and ZnO respectively, which we define as the ideal nanocomposite. Relative to pure ZnO, the photo-conversion efficiency of the ideal composite was improved substantially by 63.73%, whilst the photo-degradation rate was enhanced by 3 fold. The oxidation state and the microstructural of the segregated ideal nanocomposite confirms that oxygen vacancy defects were created when perfect surface integration occurs between TiO₂ and ZnO. Nonetheless, we believe that the performance enhancement is predominantly due to the excellent charge carrier separation and fast interfacial electron flow in this nanocomposite.     

Fabrication of novel SnWO4/ZnO using Muntingia calabura L. leaf extract with enhanced photocatalytic methylene blue degradation under visible light irradiation

In this study, SnWO₄/ZnO heterostructure has been successfully constructed using Muntingia calabura L. leaf extract (MCE). We conducted phytochemical tests to qualitatively detect the presence of secondary metabolites such as alkaloids, saponins, flavonoids, and tannins, which play an essential role in the formation of SnWO₄/ZnO. The photocatalytic activities of pristine SnWO₄, pristine ZnO, and SnWO₄/ZnO heterostructure were evaluated for the degradation of methylene blue (MB) under visible light irradiation. To investigate the photocatalytic activity of SnWO₄/ZnO heterostructure in the visible region, the adsorption effect of SnWO₄/ZnO was also studied. SnWO₄/ZnO heterostructure shows the highest degradation percentage of 82.86% within 120 min compared to pristine SnWO₄ and ZnO, which exhibit the degradation percentage of 69.48 and 40.41%, respectively. The enhanced photocatalytic of MB degradation is attributed to the formation of SnWO₄/ZnO heterostructure as a result of the decreased optical bandgap from 3.06 to 2.68 eV due to the low recombination rate of photogenerated electron-hole pairs. SnWO₄/ZnO shows a remarkable photocatalyst for dyes degradation with remarkable stability after four consecutive cycles. Importantly, this work demonstrates a simple eco-friendly, and low-cost green synthesis method to produce SnWO₄/ZnO with excellent photocatalytic activity and stability for dyes degradation under visible light irradiation.     

In vitro anticancer activity and comparative green synthesis of ZnO/Ag nanoparticles by moringa oleifera,mentha piperita,and citrus lemon

This study proposes a simple, effective, and environmentally friendly approach for the synthesis of zinc oxide/silver nanoparticles (ZnO/Ag NPs) using three different plant extracts. The plants used in this study were moringa oleifera (MO), mentha piperita (MP), and citrus lemon (CL). Characterizations of ZnO/Ag NPs were done using ultraviolet–visible spectroscopy (UV vis), X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) along with energy dispersive spectroscopy (EDX), and fourier transform infrared spectroscopy (FTIR). In accordance with size distribution findings, ZnO/Ag NPs synthesized with MO have a narrow size distribution, with the average particle size being 119 ± 36 nm. Among these three reducing agent MO act as the best reducing agent. Moreover, the anticancer activity of silver nanoparticles (Ag NPs), zinc oxide nanoparticles (ZnO NPs) and ZnO/Ag NPs synthesized with MO were demonstrated in human cervical cancer cells (HeLA). The results revealed that ZnO/Ag NPs demonstrate in vitro cell viability of 72%, 81%, and 84% using 2.5, 5, and 10 μgml^?1of ZnO/Ag NPs for 24 h. While Ag NPs and ZnO NPs prepared with MO showed 50% and 60% cell viability using 2.5 μgml^?1concentration for 24 h. This showed that the ZnO/Ag NPs act as a strong anticancer agent compared to Ag NPs and ZnO NPs. Overall, this research proposes a green synthesis approach for ZnO/Ag NPs with a wide range of potential uses, particularly in biomedicine.     

Engineering of morphological,optical, structural,photocatalytic and catalytic properties of nanostructured CuO thin films fabricated by reactive DC magnetron sputtering

Nanostructured thin films of CuO were deposited on silica glass substrates using reactive DC magnetron sputtering technique. Microstructural, morphological, optical, catalytic and photocatalytic properties of the prepared CuO thin films were examined using FESEM, AFM, Rutherford backscattering spectrometry, XRD, XPS, UV–Vis absorption and PL spectroscopy. FESEM showed nanostructures in the thin films, which were confirmed to be of monoclinic CuO by XRD analysis. Substrate temperature variation (40 °C, 100 °C and 300 °C) was found to significantly alter the optical, morphological, photocatalytic and structural properties of the CuO nanostructured thin film coatings. FESEM and AFM analyses showed decrease in size of nanostructures and surface roughness increase with increase in substrate temperature. Increase in UV–Vis absorbance and PL intensity of CuO thin films with decrease in crystallite size were noticed as the substrate temperature was increased. The prepared nanostructured CuO thin films exhibited highly enhanced photocatalytic activities and degraded dyes (MB and MO) in water in just 40 min under solar exposure and catalytic transformation of 4-nitrophenol (4-NP) took place in just 15 min. The developed CuO nanostructured thin film coatings are very promising for large scale, practical and advanced catalytic reduction of toxic 4-NP and photocatalytic applications in solar driven water purification.     

Platinum/zinc oxide nanoparticles: Enhanced photocatalysts degrade malachite green dye under visible light conditions

Zinc oxide nanoparticles (ZnO) were prepared via a sol–gel method, and a photo-assisted deposition method was used to prepare platinum on zinc oxide nanoparticles (Pt/ZnO). Several techniques were used to characterize these enhanced photocatalysts: XRD, TEM, UV–vis spectra, PL spectra, XPS, and BET surface area analysis. As-prepared samples’ photocatalytic performances were studied via degradation of malachite green dye under various visible-light-only irradiation scenarios. Results demonstrated the following: platinum (Pt) was well dispersed on and in ZnO's surfaces and pores; as such, Pt/ZnO had less surface area than pure ZnO due to pore blockage; however, advantages gained from enhanced electron-hole separation and decreased band gap width more than made up for this negative effect; moreover, Pt/ZnO prepared with 0.3 wt% Pt exhibited the lowest band gap and the highest photocatalytic activity of the various samples with a solids loading of 0.8 g/l; finally, such samples were recyclable, i.e., photocatalytic performance remained stable even after five uses.     

Structural,optical, cytotoxicity,and antimicrobial properties of MgO,ZnO and MgO/ZnO nanocomposite for biomedical applications

In this study, MgO nanoparticles were successfully fabricated and incubated inside ZnO NPs to form MgO/ZnO nanocomposite for biomedical applications. The x-ray diffraction analysis of MgO, ZnO, and MgO/ZnO has shown the single-phase x-ray diffraction patterns through X'pert High score. The crystallite sizes were calculated as 18 nm, 42 nm, and 53 nm, respectively. The average particle size of MgO, ZnO, and MgO/ZnO nanopowders depicted from secondary electron images of field emission electron microscopy were 56 nm, 400 nm, and 450 nm, respectively. The presence of MgO NPs inside ZnO NPs was confirmed by transmission electron microscopy. The elemental dispersive spectroscopy of MgO, given the peaks of oxygen and magnesium, also showed only zinc and oxygen peaks in ZnO, which confirms no other impurities in MgO and ZnO powders. The elemental analysis of MgO/ZnO nanocomposite showed the peaks of Zinc and Oxygen, along with a tiny peak of Mg. The photoluminescence and UV–vis spectroscopy revealed the absorbance fluorescence limit of the nanomaterials. Fourier transform infrared spectroscopy confirmed the several groups present in the nanocomposite. The biocompatibility of MgO, ZnO, and MgO/ZnO was observed with human peripheral blood mononuclear cells. The cytotoxicity studies were also performed against human cancer (liver and breast) cell lines. The MgO, ZnO, and MgO/ZnO exhibited the antimicrobial properties against Escherichia coli and Staphylococcus aureus.     

Green Synthesis of ZnO Nanoparticles and Its Application in the Degradation of Some Dyes

A novel ZnO photocatalyst was synthesized by a green method using lemon juice and zinc acetate as precursors, and then the effect of sucrose addition on the initial precursors was investigated. The samples were characterized by field‐emission scanning electron microscopy, X‐ray diffraction, Fourier transform infrared, UV‐visible, and photoluminescence analysis. The result showed that the as‐obtained products with the mix of lemon juice (30 mL) and sucrose had a spherical morphology with the mean particle size of about 21.5 nm. The photocatalytic activity of this sample was tested for the degradation of methyl orange, methyl red and methylene blue solutions. The results also revealed the good photocatalytic activity for the degradation of these three organic dyes. Furthermore, as‐synthesized sample was used in decolorization processes and the treatment of textile dyes (reactive blue 21).     

Solar photocatalytic decolorization of dyes in solution with TiO2 film

Application of TiO₂ film to solar photocatalysis of organic dyes, including Methylene Blue (MB) (λ_max, 660 nm), RR195 (λ_max, 540 nm) and RY145 (λ_max, 420 nm), was investigated. It was found that after 6-h solar irradiation, the extent of color degradation of dyes using solar photocatalytic system without TiO₂ film was quite limited. The color removal percentage for MB, RR195, and RY145 was found to be 23.3, −9.3, and −20.7%, respectively, resulting from competitions between the photosensitizing reaction and formation of colored intermediates during solar irradiation. However, as TiO₂ film was applied, the color degradation capability of solar photocatalytic system was significantly improved, in spite of the fact that only approximately 7% of solar irradiation belongs to the UV region. The color removal percentage for MB, RR195, and RY145 was up to 93.6%, 85.3%, and 71.1%, respectively, after 6-h irradiation. We believed that in such a solar photocatalytic system immobilized with TiO₂ film, both the maximum absorbance wavelength of the dye and the adsorbability of the dye on TiO₂ film played significant roles on the rate and efficiency of color removal of the dye solutions. Moreover, the possible reaction mechanism was proposed. The solar photocatalytic process with immobilized TiO₂ film was found to follow the pseudo-first order reaction kinetics. Color removal rate of MB was almost twice of that of RY145. Accordingly, the photocatalytic degradation process using solar light as an irradiation source, and immobilized TiO₂ as a photocatalyst, showed potential application for the decolorization of wastewater.     

Photocatalytic degradation of Rhodamine B dye using ZnO–SnO2 electrospun ceramic nanofibers

ZnO–SnO₂ nanofibers were fabricated by the electrospinning technique combined with calcination at 600 °C. Their structural and morphological properties were analyzed by X-ray diffraction and scanning/transmission electron microscopy, and their photocatalytic activity was investigated by the degradation of Rhodamine B (RhB) dye by visible light irradiation. UV–vis spectral data were used to estimate the photodegradation efficiency of the metal oxide nanocomposites. All the RhB dye samples were tested for six hours of degradation the highest efficiency being obtained for a molar ratio Sn/Zn of 0.030.     

Structural,optical and photocatalytic properties of hafnium doped zinc oxide nanophotocatalyst

A series of novel hafnium (Hf) doped ZnO nanophotocatalyst were synthesized using a simple sol–gel method with a doping content of up to 6 mol%. The structure, morphology and optical characteristics of the photocatalysts were characterized by XRD, SEM, TEM, FTIR, XPS, DRS and PL spectroscopy. The successful synthesis and chemical composition of pure and doped ZnO photocatalysts were confirmed by XRD and XPS. DRS confirmed that the spectral responses of the photocatalysts were shifted towards the visible light region and showed a reduction in band gap energy from 3.26 to 3.17 eV. Fluorescence emission spectra indicated that doped ZnO samples possess better charge separation capability than pure ZnO. The photocatalytic activity of Hf-doped ZnO was evaluated by the methylene blue (MB) degradation in aqueous solution under sunlight irradiation. Parameters such as irradiation time and doping content were found effective on the photoactivity of pure ZnO and Hf-doped ZnO. The photocatalysis experiments demonstrated that 2 mol% Hf-ZnO exhibited higher photocatalytic activity as compared to ZnO, ZnO commercial and other hafnium doped ZnO photocatalysts and also revealed that MB was effectively degraded by more than 85% within 120 min. The enhanced photoactivity might be attributed to effective charge separation and enhanced visible light absorption. It was concluded that the presence of hafnium within ZnO lattice could enhance the photocatalytic oxidation over pure ZnO.     

Effect of heterojunction on photocatalytic properties of multilayered ZnO-based thin films

In the present study, the effects of the heterojunctions on the optical and structural characteristics and the resulting photocatalytic properties of multilayered ZnO-based thin films were investigated. The junctions were composed of semiconducting ZnO nano-porous films coated on the In₂O₃ and SnO₂ counterpart layers. The multilayered ZnO films based on the triple-layered Ag-doped indium oxide (AIO)/tin oxide (TO)/zinc oxide (ZnO), indium oxide (IO)/Ag-doped tin oxide (ATO)/zinc oxide (ZnO), indium oxide (IO)/tin oxide (TO)/zinc oxide (ZnO) and tin oxide (TO)/indium oxide (IO)/zinc oxide (ZnO) have been fabricated by subsequent sol–gel dip coating. Their structural and optical properties combined with photocatalytic characteristics were examined toward degradation of Solantine Brown BRL (C.I. Direct Brown), an azo dye using in Iran textile industries as organic model under UV light irradiation. Effects of operational parameters such as initial concentration of azo dye, irradiation time, solution pH, absence and presence of Ag doping and consequent of sublayers on the photodegradation efficiencies of ZnO nultilayered thin films were also investigated and optimum conditions were established. It was found that the photocatalytic degradation of azo dye on the composite films followed pseudo-first order kinetics. Photocatalytic activity of AIO/TO/ZnO interface composite film was higher compared with other films and the following order was observed for films activities: AIO/TO/ZnO > IO/TO/ZnO > ATO/IO/ZnO > TO/IO/ZnO. Differences in the film efficiencies can be attributed to differences in crystallinity, interfacial lattice mismatch, and surface morphology. Besides, the presence of Ag doping between layers that may act as trap for electrons generated in the ZnO over layer thus preventing electron–hole recombination.     

Optimizing the structural and photocatalytic performance of Ag-decorated ZnO/Zn(OH)2 nanoparticles for RhB degradation

In this study, as-prepared and Ag-decorated ZnO/Zn(OH)₂ composite nanoparticles (NPs) were obtained using the sol–gel technique. First, the effect of aging on the structural, optical, and morphological features was examined. Ag NPs can interact with the electronic structure of ZnO/Zn(OH)₂ NPs, resulting in changes in their energy levels. It was found that the composite NPs obtained after 6 h solution aging increased in full width at half maximum and good crystallinity of the structures from the X-ray diffraction (XRD) measurements. The Raman spectrum supports the experimental data obtained from XRD and Fourier transform infrared, a material containing a mixture of ZnO and Zn(OH)₂. From the morphological study, Ag NPs were successfully decorated on the ZnO/Zn(OH)₂ surface, and composite NPs did not change the morphological appearance of the structure. Second, the photocatalytic performance of the samples was investigated. In the experimental setting, ultra-violet A light was employed as the irradiation source, whereas rhodamine B (RhB) was used as the dyestuff. The photo-degradation of the RhB dyestuff on composite NPs was observed to be 98.5% and 92.5% for 6 and 2 h aged samples, respectively. On Ag NPs, the catalytic performance of the sample was increased up to 95% after 180 min.