Enhanced NIR photoemission from Bi-doped aluminoborate glasses via topological tailoring of glass structure

Bismuth (Bi)-doped laser glasses with broadband emission are of current interest in the fields of sensing, bio-imaging, and photonics. For practical applications, it must be considered how to improve the emission efficiency, in particular, for borate glasses with wide glass-forming range, low melting point, and excellent fiberizing ability. Herein, we experimentally demonstrate that addition of GeO₂ to aluminoborate glasses can effectively enhance Bi NIR emission by more than 300 times with prolonged decay time (~500 μs) and good homogeneity, which is, to our best knowledge, seldom achieved in Bi-doped borate multi-component glasses. The addition of second glass-former GeO₂, as revealed by detailed optical and structural analysis, leads to the facile regulation on local glass structure, forcing the conversion of aluminum species from AlO₅ and AlO₆ to AlO₄ and consequently pushes the conversion of Bi³⁺ to Bi⁺ and Bi⁰ and stabilizes Bi NIR centers, which finally results in highly enhanced Bi NIR emission. We believe these results could contribute to designing Bi-activated multi-component laser glass and fibers with efficient NIR photoemission.     

Manipulating Bi NIR emission by adjusting optical basicity,boron and aluminum coordination in borate laser glasses

Bismuth‐doped (Bi) glasses and fibers have raised considerable attention for broadband emission and tunable fiber lasers in the near infrared (NIR) region. However, they suffer from low efficiency and it remains challenging to enhance Bi NIR emission. Here, we propose a facile way to enhance and tune the Bi NIR emission by adjusting optical basicity and modulating the boron and aluminum coordination in borate glasses. We find that BO₄ and AlO₅ species favor Bi NIR emission, right followed by the analyses of static emission spectra, the Fourier transform infrared (FT‐IR), and nuclear magnetic resonance (NMR) spectroscopy. Furthermore, abnormal Bi NIR luminescence phenomenon and boron anomaly were observed, which are attributed to the synthetic effect of B and Al coordination transformation. Besides, we find that BO₄ tetrahedron plays a major role in enhancing Bi NIR emission at low Al content, while AlO₅ hexahedron group will dominate at high Al concentration. Our investigation may give an insight into the luminescent behaviors of Bi in borate glasses and contribute to improving the performance of Bi‐doped fiber and fiber lasers in future.     

New strategy to enhance the broadband near‐infrared emission of bismuth‐doped laser glasses

Bismuth‐doped glasses and fibers with broadband near‐infrared (NIR) emission have garnered much attention on account of their potential applications in new fiber lasers and broadband amplifiers. Yet the realization of high gain from Bi‐doped fibers and highly efficient NIR emission from Bi‐doped glasses are still a stubborn puzzle. The enhancement of Bi NIR emission is normally based on modifying the glass composition and topology, which will change the structure of the glass over a wide range and alter the thermal or mechanical properties of the glass simultaneously, making it more complicated for the designing and fabricating of Bi fibers with good performance. Here, we find that a trace addition of Si₃N₄ can efficiently enhance the Bi NIR emission without changing the glass structure significantly, right followed by spectral and structural analysis. ²⁷Al NMR measurement reveals that the short‐ to medium‐range order of this glass is unchanged. The EPMA measurement confirms the homogeneity of fabricated glass. The great enhancement and red‐shift under blue light excitation may originate from the conversion of Bi active centers to low valence. Our results indicate that the trace addition of nitride could be a facile and maneuverable way to control the valence of active ions in glasses, which may contribute to improving the performance of photonic glasses.     

Enhancement of ultrabroadband Bi NIR emission via fluorination for all wavelength amplification of optical communication

Bismuth (Bi)-doped photonic glasses and fibers with broadband near-infrared (NIR) photoemission have potential applications in tunable lasers and broadband amplifiers. Yet, when it comes to all wavelength amplification of optical communication, it remains challenging to achieve efficient Bi NIR emission in the technically relevant C- and L- bands (1530-1625 nm). Here, we propose a scheme by fluorination triggered enhancement of ultra-broadband Bi NIR emission in nitrided germanate glasses. Besides, compared to previous research, a unique and efficient Bi-activated ultra-wideband NIR emission with new emission bands peaked at ~924 and ~1520 nm under excitation of 450 nm are obtained in nitrided germanate glasses after fluorination. Moreover, the fluorination can modulate the local chemical environment by forcing the conversion of aluminum species from AlO₄ to AlO₅ and AlO₆ and consequently increase the flexibility of the glass network structure, which finally induces the conversion of Bi species and then manipulates the relative emission intensity of different Bi NIR centers. Thus, a flat and tunable emission spectrum covering the entire optical communication band is obtained by optimizing the fluoride amount. We believe this work is helpful to design the Bi-doped tunable fiber lasers and ultra-broadband amplifiers for all wavelength amplification of optical communication.     

The origin of the heterogeneous distribution of bismuth in aluminosilicate laser glasses

As one kind of novel and burgeoning laser materials, bismuth‐doped silicate glasses have aroused increasing attention for the super broadband near‐infrared (NIR) emission. However, the large optical scattering loss, resulting from optical heterogeneity in glass color and refractive index, limits their further applications in telecommunication system. Thus, it is urgent to uncover the essence of heterogeneity in Bi‐doped silicate glasses and subsequently improve glass optical performance. It will give us some hint to homogenize the glass component and Bi active centers so as to boost the development of Bi‐based glass materials. Here, taking 1 typical Bi‐doped calcium aluminosilicate glass as an example, we revealed the origin of the optical heterogeneities in glass color and refractive index through the NIR emission spectra, electron probe microanalyzer (EPMA) of elements and X‐ray photoelectron spectroscopy (XPS) of Bi 4f_5/2, Bi 4f_7/2, and Al 2p. The inhomogeneous distribution of Bi and aluminum components is responsible for the heterogeneity in this glass system. In addition, we found that tetrahedral coordinated aluminum favors the existence of Bi NIR centers, consequently resulting in enhanced Bi NIR emissions. Furthermore, based on our results and the role of Al³⁺ in glass network, we demonstrate the homogenizing of glass component by finely tuning glass composition. This work will enrich the understanding of Bi‐doped laser glass and provide a guideline for the design of component‐derived Bi‐doped silicate glasses and fibers with efficient NIR emission and high optical quality.     

Ultra-broadband and thermally stable NIR emission in Bi-doped glasses and fibers enabled by a metal reduction strategy

Bismuth (Bi)-doped glasses with broadband near-infrared (NIR) emission have been drawing increasing interest due to their potential applications in tunable fiber lasers and broadband optical amplifiers. Yet, the implementation of highly efficient and ultra-broadband Bi NIR emission covering the whole telecommunication window remains a daunting challenge. Here, via a metal reduction strategy to simultaneously create a chemically reductive environment during glass melting and enhance the local network rigidity, a super broadband (FWHM ≈ 600 nm) NIR emission covering the entire telecommunications window with greatly enhanced intensity was achieved in Bi-doped germanate glasses. More importantly, due to the excellent thermal stability, the super broadband Bi NIR emission can be well retained after the glass was drawn into an optical fiber. Furthermore, the transmission loss of 0.066 dB/cm at 1310 nm and an obvious broadband amplified spontaneous emission spectrum spanning a range of 1000–1600 nm were observed in this fiber. This work can strengthen our comprehension of the complicated Bi NIR luminescence behaviors and offer a feasible and universal way to fabricate tunable fiber lasers and broadband optical amplifiers based on Bi-doped multicomponent glasses.     

Glass-forming region and enhanced Bi NIR emission in sodium tantalum silicate laser glass

Bismuth (Bi)-doped glasses and fibers are of current interest as promising active media for new fiber lasers and amplifiers due to their 800-1700 nm near-infrared (NIR) emission. However, the optically active Bi centers in silica are easily volatilized during high-temperature fiber drawing, which results in low Bi doping concentration and low gain NIR luminescence. Here, we explored the glass-forming region in a model glass system of sodium tantalum silicate (Na₂O-Ta₂O₅-SiO₂) glass and attained suitable glass host for enhancing Bi NIR emission, right followed by detailed analysis on optical and structural characterization. Glass-forming region roughly lies in where Ta₂O₅ ≤ 30 mol%, SiO₂ ≥ 40 mol%, and Na₂O ≤ 40 mol%. Not only is glass-forming ability improved but also Bi NIR emission is enhanced (~60 times) by the introduction of Ta into glass network. Dissociated Na cations are restricted beside Ta, the high-field-strength element, so that the negative impacts of Na cations on glass formation and Bi NIR emission are weakened, which is responsible for the highly enhanced Bi NIR emission. This work helps us understand the glass-forming of tantalum silicate glass systems and luminescent behaviors of Bi. Hopefully, it could contribute to designing the Bi-doped laser glasses and high gain fibers with stable luminescent properties in future.     

Tunable luminescence from bismuth‐doped phosphate laser glass by engineering photonic glass structure

Because of ultra‐broadband near‐infrared (NIR) emission bismuth‐activated glasses and fibers offer a new promising platform for novel photonic devices such as new type of optical amplifiers and broadly tunable fiber lasers. Yet, challenge remains to manipulate the NIR emission behavior of bismuth (Bi) in photonic glasses for efficient Bismuth‐doped fiber and fiber lasers. Here, by engineering phosphorus and aluminum's topology, broadly tunable NIR emission has been realized in Bismuth‐doped phosphate laser glass. Structural and optical analyses on ²⁷Al magic‐angle spinning nuclear magnetic resonance (MAS NMR), ³¹P MAS NMR, fourier transform infrared (FTIR) and static emission spectra suggest that polymerization of glass network can be improved by proper addition of aluminum into the system, which can be evidenced by partial conversion of Q² to Q³ species of phosphorus and the shift of P–O–P asymmetric stretching vibration toward lower frequency, and this turns out beneficial to Bi NIR emission. Embedding aluminum tetrahedra into phosphorus glass network can reduce the local crystal field around bismuth and therefore lead to the blueshift of Bi emission. This work presents new insights into the luminescent behavior of Bi ions in phosphate glass and it helps the design and fabrication of Bismuth‐doped glasses and fibers in future.     

Predictable tendency of Bi NIR emission in Bi‐doped magnesium aluminosilicate laser glasses

Because of superbroad luminescence in the range of near infrared (NIR), Bi‐doped glasses and fibers have received more attentions recently for the applications in super broadband optical fiber amplifiers or new wavelength lasers. As the luminescence comes from the transitions between naked 6p orbitals of bismuth, it is very susceptible to slight changes of local field around Bi. Therefore, it is always very challenging to predict NIR emission of bismuth in advance. Here, we found bismuth NIR emission shows predictable tendency in ternary glass system of MgO–Al₂O₃–SiO₂. The emission peak shifts red along the content of magnesium upon the excitation of 484 nm, which follows a single exponential growth equation. In the meantime, the full width at half maximum (FWHM) is broadened while the lifetime keeps decreasing. Glass structure analysis on basis of FTIR, ²⁷Al NMR, ²⁹Si NMR spectra reveals that these changes correlate to integrity of glass network, the increased disorder of local field around bismuth and the enhanced interaction between bismuth and host, which are perhaps due to the linear increase of nonbridging oxygen, and the enhanced Si–O asymmetric stretching vibrations along with magnesium, respectively. Electron probe microanalysis shows good homogeneity of Si, Al, Mg, Bi, and O distribution within the samples, and yoyo experiments of heating and cooling between 30°C and 300°C reveal the good resistance of such doped glasses to thermal degradation. This makes the glasses promising in applications of fiber devices even under extreme condition such as at higher temperature. The finding in this work should be helpful for the design of Bi‐doped laser glasses in future.     

Generation of Emission Centers for Broadband NIR Luminescence in Bismuthate Glass by Femtosecond Laser Irradiation

Bismuth-doped glasses have recently received significant interest as potential material for ultrabroadband optical amplification in the telecommunication spectral bands, as well as as gain material for fiber lasers. However, the nature of the active centers that are responsible for the observed near-infrared (NIR) luminescence is still highly debated. In order to probe the mechanism that leads to NIR emission in bismuth-containing glasses, femtosecond (fs) laser irradiation was used. It is shown that local absorption properties in the visible spectral range can be altered in initially transparent bismuthate glasses after fs laser irradiation. Induced absorption centers exhibit the well-known broadband optical emission peaking at ∼1250 nm when excited with a 785 nm diode laser. Absorption and emission intensities increase with increasing average pulse energy. These observations are interpreted as a photo-induced reduction reaction of Bi³⁺ to Bi⁺ species, while the previously discussed formation of Bi-clusters by ion diffusion is excluded due to the very short interaction time that results from the use of fs laser. Bi⁺ species are, therefore, proposed as the major origin of NIR emission from Bi-doped glasses.     

Crystallization kinetics and enhanced Bi NIR luminescence of transparent silicate glass‐ceramics containing Sr2YbF7 nanocrystals

Bismuth‐doped glasses and crystals have been widely investigated due to their intriguing potential applications in superbroadband fiber amplifier and lasers in new NIR spectral range. However, few reports have been devoted so far to bismuth‐doped transparent glass‐ceramics. Here, this work reports on bismuth‐doped silicate glasses and glass‐ceramics, which were prepared by melt‐quenching and consequent annealing processes, respectively. On the basis of the analyses on crystallization kinetics, nucleation and growth rate of crystalline phase can be modulated and Sr₂YbF₇ nanophase can, therefore, be precipitated uniformly inside the glass matrix in a controlled way to maintain proper transparence especially in optical telecommunication windows. Once the nanophase comes into being, enhanced bismuth NIR luminescence can be observed by more than 40 times upon excitation of 470 nm. Similar enhancement can appear upon different excitation schemes and the mechanism is discussed accordingly. Such Bi doped transparent glass‐ceramics with improved luminescence efficiency might find application in fiber lasers for future optical fiber communication.     

Study of Eu3+–Gd3+ co-doped Ba–Bi–B glasses for red-laser applications: Physical,structural, photoluminescence and time-resolved spectral characteristics

A series of Eu³⁺ and Eu³⁺/Gd³⁺ co-doped barium-bismuth-borate (Ba–Bi–B) glasses were prepared by melt-quench technique. And deliberated the physical, structural, and spectroscopic properties of all glasses and explored the energy transfer process from Gd³⁺ to Eu³⁺ ions. The density of glasses increased with increasing of Gd³⁺ concentration in co-doped glasses. Characteristics of steady-state and time-resolved photoluminescence (PL) of Eu-doped and Eu³⁺-Gd³⁺ co-doped glasses under different excitation wavelengths suggested the prospects of the investigated glass system for display device applications. PL spectrum displays a strong red emission peak centered at 612 nm due to the Eu³⁺: ⁵D₀→ ⁷F₂ transition. Less intense emissions centered at 577 nm (⁷F₀), 590 nm (⁷F₁), 651 nm (⁷F₃) and 700 nm (⁷F₄) are also observed from the radiative transitions of the excited state ⁵D₀ of Eu³⁺ions. The values of radiative parameters such as transition probability, branching ratios, and stimulated emission cross-sections were obtained from Judd–Ofelt theory analysis and indicated the aptness of the Ba–Bi–B glasses for optical devices. A 5-fold enhancement in the PL intensity was observed in 1.0 mol% Eu³⁺ and 3.0 mol% Gd³⁺ co-doped glass under λ_Exci. = 394 nm excitation. The calculated commission Internationale de l'eclairage color coordinates and correlated color temperature values show that the Ba–Bi–B glasses are useful for red-laser and display device applications.     

Controllable ultra-broadband visible and near-infrared photoemissions in Bi-doped germanium-borate glasses

The design of functional materials with tunable broadband luminescence performance is still of great interest in the fields of lighting, solar cells, tunable lasers, and optical amplifiers. Here, via a melt-quenching method, a series of bismuth (Bi)-doped germanium-borate glasses with composition of 40GeO₂–25B₂O₃–25Gd₂O₃–10La₂O₃–xBi₂O₃ have been prepared, in which multiple Bi active centers can be stabilized simultaneously. Dual-modulating modes of visible (380-750 nm) and near-infrared (NIR) (1000-1600 nm) broadband photoemissions were effectively controlled under flexible excitation scheme. Photoluminescence (PL) spectra at low temperature 10-298 K were appropriately employed to interpret such an unusual wide visible emission band. To further illustrate the origin of NIR component, transmission electron microscopy (TEM) measurement was carried out. It is demonstrated experimentally that the visible emission mainly originates from the collective contribution of the ³P₁/³P₀¹S₀ transitions of Bi³⁺, while the broadband NIR luminescence should be related to the formation of low valent Bi⁺ and (or) Bi⁰ centers. This work may help to enhance the knowledge of the complex luminescence mechanism for the Bi species and it also enables such transparent glass materials to be a promising candidate for the multifunctional tunable light source.     

Effect of TeO2 on Near‐Infrared Emission from Bismuth Centers in Borogermanate Glasses

Bi‐doped xTeO₂–(60?x)GeO₂–15B₂O₃–20MgO–5Al₂O₃ glasses were prepared by the conventional melt‐quenching method and their absorption and fluorescence spectra were characterized. Broadband near‐infrared (NIR) emission from Bi centers centered around 1240 nm with a full width at half maximum (FWHM) of 250 nm was observed, and the position of the emission peak strongly depends on the excitation wavelength. Increasing TeO₂ concentration results in the strong coloration of the glass, leading to the reduction and finally, complete quenching of the NIR emission. Based on Raman, X‐ray photoelectron spectroscopy and transmission microscopy observation, the coloration of the glass at high TeO₂ concentration can be ascribed to the precipitation of elemental Te nanoparticles of around 3–8 nm, which effectively suppresses the NIR emission by reabsorption. The precipitation of Te nanoparticles in an oxide glass may find novel applications in photonics and relevant fields.     

Accurate Determination of Optical Functions of Ge–As–Te Glasses via Spectroscopic Ellipsometry

Variable angle spectroscopic ellipsometry technique was used to characterize optical functions of chalcogenide glasses from Ge–As–Te system in broad spectral range (300 nm–20 μm). Measured real and imaginary parts of pseudodielectric function were modeled with Cody–Lorentz approach and Sellmeier equation. Very good agreement between experimentally measured and modeled imaginary and real parts of pseudodielectric functions leads to precise determination of optical functions (refractive index, extinction coefficient) of studied Ge–As–Te glasses in extremely broad spectral range covering UV–Vis‐NIR‐MIR. The method is generally applicable for other glasses and amorphous materials.     

Improving luminescence behavior and glass stability of tellurium-doped germanate glasses by modifying network topology

Broadband near-infrared (NIR) luminescent materials are of great interest for their potential application in optical communication, remote sensing, imaging, and homeland security. Tellurium (Te) doped glasses were recently recognized as such a promising candidate due to their broadband NIR emission (700–1700 nm). However, the achievement of Te-doped glasses with high luminescence efficiency and glass stability (GS) remains a daunting challenge. Here, the luminescence behavior and GS of Te-doped germanate glasses are manipulated by tailoring the glass network topology. Te NIR luminescence is enhanced by tailoring topological cages in germanate glass network structure through varying glass network modifiers. Meanwhile, the GS of potassium germanate glass is significantly enhanced due to increased network connectivity caused by the co-introduction of alkaline earth oxides. Finally, NIR luminescence intensity of the glass was further enhanced by optimizing the doping concentration of TeO₂. The findings here could contribute to designing Te-activated glasses with improved performance for application in optical amplifiers and tunable fiber lasers.     

Near‐Infrared Broadband Photoluminescence of Bismuth‐Doped Zeolite‐Derived Silica Glass Prepared by SPS

Through the order–disorder transition process of zeolites, bismuth‐doped zeolite‐derived silica glasses with broadband near‐infrared (NIR) photoluminescence have been successfully prepared by spark plasma sintering (SPS). The samples were characterized by X‐ray diffraction, UV‐vis, photoluminescence, and fluorescence lifetime. The results showed that as‐prepared samples possessed favorable broadband NIR luminescence. The NIR emission (peaked at ~1140 nm) intensity decreased with increasing the bismuth doping concentration when excited by 500 and 700 nm. The tendency was different from the emissions (peaked at ~1240 nm) excited by 800 nm. In addition, the NIR fluorescence peaks of the fixed Bi concentration sample can be observed almost around 1140 or 1240 nm when excited by different wavelengths from 500 to 950 nm. These phenomena implied that the NIR emission peaked at different wavelengths may originate from different bismuth species. Three kinds of Bi active centers Bi⁺, Bi⁰, and (Bi₂)^2? were proposed to contribute to the NIR emission peaks at ~1140, 1240, and 1440 nm, respectively. Interestingly, a broadband NIR emission peaked at 1207 nm with a full‐width at half maximum of 273 nm was observed when excited by 600 nm, whose intensity was stronger than that excited by 800 nm. This property might be useful for broadband fiber amplifiers and tunable lasers.     

Effect of topological structure on photoluminescence of PbSe quantum dot‐doped borosilicate glasses

Borosilicate glasses doped with PbSe quantum dots (QDs) were prepared by a conventional melt‐quenching process followed by heat treatment, which exhibit good thermal, chemical, and mechanical stabilities, and are amenable to fiber‐drawing. A broad near infrared (NIR) photoluminescence (PL) emission (1070‐1330 nm) band with large full‐width at half‐maximum (FWHM) values (189‐266 nm) and notable Stokes shift (100‐210 nm) was observed, which depended on the B₂O₃ concentration. The PL lifetime was about 1.42‐2.44 μs, and it showed a clear decrease with increasing the QDs size. The planar [BO₃] triangle units forming the two‐dimensional (2D) glass network structure clearly increased with increasing B₂O₃ concentration, which could accelerate the movement of Pb²⁺ and Se^2? ions and facilitate the growth of PbSe QDs. The tunable broadband NIR PL emission of the PbSe QD‐doped borosilicate glass may find potential application in ultra‐wideband fiber amplifiers.     

An Efficient Dual‐Mode Solar Spectral Modification for c‐Si Solar Cells in Tm3+/Yb3+ Codoped Tellurite Glasses

A series of Tm³⁺/Yb³⁺ codoped tellurite glasses, which demonstrate an interesting dual‐mode solar spectral converting for c‐Si solar cells, have been successfully prepared by conventional high‐temperature melt‐quenching technique. The photoluminescence (PL), photoluminescence excitation (PLE) spectra along with the decay curves have been studied systematically. The results indicate that the transparent glasses show two distinguishable near infrared (NIR) spectral converting behaviors, that is, quantum cutting (QC) and downshifting (DS) processes, sensitized by narrow f–f transition absorption of Tm³⁺:³H₆ → ¹G₄ at 465 nm and broad absorption band due to charge‐transfer state (CTS) of Yb³⁺‐O^2? at 320 nm, respectively. The Tm³⁺/Yb³⁺ codoped tellurite glasses convert ultraviolet (240–400 nm) and blue (450–490 nm) photons into NIR (920–1100 nm) ones, which well match the optimal spectral response of silicon (Si) solar cells. The prepared tellurite glass can be potentially utilized as spectral converter to improve the photovoltaic conversion of c‐Si solar cells. The dual‐mode solar spectrum converting material might explore a novel approach to realize UV‐Vis to NIR downconversion for Si solar cells application.     

Controlled growth and spectroscopy characterization of blue violet perovskite quantum dots in borate glasses

Blue violet light emitting CsPb(Cl/Br)₃ perovskite quantum dots glasses (QDGs) have been successfully fabricated in multi-component borate glass matrix by melt quenching and heat treatment. The spectral characteristics have been evaluated by photoluminescence (PL), PL excitation (PLE), PL decay and absorption spectra. The recipe and preparation conditions have been optimized for controlled growth of QDs. By using raw materials of NH₄Br/NH₄Cl/PbO and crucible cover, optimizing composition of Na₂O/K₂O in matrix, melting temperature and time, heat treatment temperature and time, and NH₄Cl and NH₄Br contents, we have finally realized blue violet exciton emission in target range of 405–440 nm. The PL wavelength adjustment is comprehensive effect of the abovementioned influence factors. The emission in short wavelength of 405–440 nm is due to controlled growth of the QDs. In final CsPb(Cl/Br)₃ QDs, the contents of Cl and Br are suitable and the Cl/Br ratios are large. A little Br is necessary for growth of CsPb(Cl/Br)₃ QDs and then the Br is partially replaced by Cl at suitable treatment condition. Unsymmetrical PL spectrum profile of some samples is explained as reabsorption effect by monitoring PL spectral profile and PL decay. The temperature characteristics of PL spectra show good recoverability after a temperature cycle.