Adsorption of REEs from Aqueous Solution by EDTA-Chitosan Modified with Zeolite Imidazole Framework (ZIF-8)

Chitosan (CS) modified with ethylenediamine tetraacetic acid (EDTA) was further modified with the zeolite imidazole framework (ZIF-8) by in situ growth method and was employed as adsorbent for the removal of rare-earth elements (REEs). The material (EDTA–CS@ZIF-8) and ZIF-8 and CS were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), and nitrogen adsorption/desorption experiments (N₂- Brunauer–Emmet–Teller (BET)). The effects of adsorbent dosage, temperature, the pH of the aqueous solution, contact time on the adsorption of REEs (La(III), Eu(III), and Yb(III)) by EDTA–CS@ZIF-8 were studied. Typical adsorption isotherms (Langmuir, Freundlich, and Dubinin–Radushkevich (D-R)) were determined for the adsorption process, and the maximal adsorption capacity was estimated as 256.4 mg g⁻¹ for La(III), 270.3 mg g⁻¹ for Eu(III), and 294.1 mg g⁻¹ for Yb(III). The adsorption kinetics results were consistent with the pseudo-second-order equation, indicating that the adsorption process was mainly chemical adsorption. The influence of competing ions on REE adsorption was also investigated. After multiple cycles of adsorption/desorption behavior, EDTA–CS@ZIF-8 still maintained high adsorption capacity for REEs. As a result, EDTA–CS@ZIF-8 possessed good adsorption properties such as stability and reusability, which have potential application in wastewater treatment.     

A New Perspective on Adsorbent Materials Based Impregnated MgSiO3 with Crown Ethers for Palladium Recovery

The study of new useful, efficient and selective structures for the palladium ions’ recovery has led to the development of a new series of macromolecules. Thus, this study presents a comparative behavior of two crown benzene ethers that modify the magnesium silicate surface used as adsorbent for palladium. These crown ethers are dibenzo18-crown-6 (DB18C6) and dibenzo 30-crown-10 (DB30C10). The obtained materials were characterized by scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDX) and Fourier-transform infrared spectroscopy (FT-IR). The specific surface area (BET) and point of zero charge (PZC) of the two materials were determined. The palladium ions’ recovery from synthetic aqueous solutions studies aimed to establish the adsorption mechanism. For this desideratum, the kinetic, equilibrium and thermodynamic studies show that MgSiO₃-DB30C10 have a higher adsorption capacity (35.68 mg g⁻¹) compared to MgSiO₃-DB18C6 (21.65 mg g⁻¹). Thermodynamic studies highlight that the adsorption of Pd(II) on the two studied materials are spontaneous and endothermic processes. The positive values of the entropy (ΔS⁰) suggest that the studied adsorption processes show a higher disorder at the liquid/solid interface. Desorption studies were also performed, and it was found that the degree of desorption was 98.3%.     

Easy Preparation of Liposome@PDA Microspheres for Fast and Highly Efficient Removal of Methylene Blue from Water

Mussel-inspired chemistry was usefully exploited here with the aim of developing a high-efficiency, environmentally friendly material for water remediation. A micro-structured material based on polydopamine (PDA) was obtained by using liposomes as templating agents and was used for the first time as an adsorbent material for the removal of methylene blue (MB) dye from aqueous solutions. Phospholipid liposomes were made by extrusion and coated with PDA by self-polymerization of dopamine under simple and mild conditions. The obtained Liposome@PDA microspheres were characterized by DLS and Zeta potential analysis, TEM microscopy, and FTIR spectroscopy. The effects of pH, temperature, MB concentration, amount of Liposome@PDA, and contact time on the adsorption process were investigated. Results showed that the highest adsorption capacity was obtained in weakly alkaline conditions (pH = 8.0) and that it could reach up to 395.4 mg g⁻¹ at 298 K. In addition, adsorption kinetics showed that the adsorption behavior fits a pseudo-second-order kinetic model well. The equilibrium adsorption data, instead, were well described by Langmuir isotherm. Thermodynamic analysis demonstrated that the adsorption process was endothermic and spontaneous (ΔG⁰ = −12.55 kJ mol⁻¹, ΔH⁰ = 13.37 kJ mol⁻¹) in the investigated experimental conditions. Finally, the applicability of Liposome@PDA microspheres to model wastewater and the excellent reusability after regeneration by removing MB were demonstrated.     

Biosorption of Zn(II) from Seawater Solution by the Microalgal Biomass of Tetraselmis marina AC16-MESO

Biosorption refers to a physicochemical process where substances are removed from the solution by a biological material (live or dead) via adsorption processes governed by mechanisms such as surface complexation, ion exchange, and precipitation. This study aimed to evaluate the adsorption of Zn²⁺ in seawater using the microalgal biomass of Tetraselmis marina AC16-MESO “in vivo” and “not alive” at different concentrations of Zn²⁺ (0, 5, 10, and 20 mg L⁻¹) at 72 h. Analysis was carried out by using the Langmuir isotherms and by evaluating the autofluorescence from microalgae. The maximum adsorption of Zn²⁺ by the Langmuir model using the Q_max parameter in the living microalgal biomass (Q_max = 0.03051 mg g⁻¹) was more significant than the non-living microalgal biomass of T. marine AC16-MESO (Q_max = 0.02297 mg g⁻¹). Furthermore, a decrease in fluorescence was detected in cells from T. marina AC16-MESO, in the following order: Zn²⁺ (0 < 20 < 5 < 10) mg L⁻¹. Zn²⁺ was adsorbed quickly by living cells from T. marine AC16-MESO compared to the non-living microalgal biomass, with a decrease in photosystem II activities from 0 to 20 mg L⁻¹ Zn²⁺ in living cells.     

Comparison of Cr(VI) Adsorption Using Synthetic Schwertmannite Obtained by Fe3+ Hydrolysis and Fe2+ Oxidation: Kinetics,Isotherms and Adsorption Mechanism

Good sorption properties and simple synthesis route make schwertmannite an increasingly popular adsorbent. In this work, the adsorption properties of synthetic schwertmannite towards Cr(VI) were investigated. This study aimed to compare the properties and sorption performance of adsorbents obtained by two methods: Fe³⁺ hydrolysis (SCH_A) and Fe²⁺ oxidation (SCH_B). To characterise the sorbents before and after Cr(VI) adsorption, specific surface area, particle size distribution, density, and zeta potential were determined. Additionally, optical micrographs, SEM, and FTIR analyses were performed. Adsorption experiments were performed in varying process conditions: pH, adsorbent dosage, contact time, and initial concentration. Adsorption isotherms were fitted by Freundlich, Langmuir, and Temkin models. Pseudo-first-order, pseudo-second-order, intraparticle diffusion, and liquid film diffusion models were used to fit the kinetics data. Linear regression was used to estimate the parameters of isotherm and kinetic models. The maximum adsorption capacity resulting from the fitted Langmuir isotherm is 42.97 and 17.54 mg·g⁻¹ for SCH_A and SCH_B. Results show that the adsorption kinetics follows the pseudo-second-order kinetic model. Both iron-based adsorbents are suitable for removing Cr(VI) ions from aqueous solutions. Characterisation of the adsorbents after adsorption suggests that Cr(VI) adsorption can be mainly attributed to ion exchange with SO₄²⁻ groups.     

Refolded scFv Antibody Fragment against Myoglobin Shows Rapid Reaction Kinetics

Myoglobin is one of the early biomarkers for acute myocardial infarction. Recently, we have screened an antibody with unique rapid reaction kinetics toward human myoglobin antigen. Antibodies with rapid reaction kinetics are thought to be an early IgG form produced during early stage of in vivo immunization. We produced a recombinant scFv fragment for the premature antibody from Escherichia coli using refolding technology. The scFv gene was constructed by connection of the V_H–V_L sequence with a (Gly₄Ser)₃ linker. The scFv fragment without the pelB leader sequence was expressed at a high level, but the solubility was extremely low. A high concentration of 8 M urea was used for denaturation. The dilution refolding process in the presence of arginine and the redox reagents GSH and GSSH successfully produced a soluble scFv protein. The resultant refolded scFv protein showed association and dissociation values of 9.32 × 10⁻⁴ M⁻¹·s⁻¹ and 6.29 × 10⁻³ s⁻¹, respectively, with an affinity value exceeding 10⁷ M⁻¹ (k_on/k_off), maintaining the original rapid reaction kinetics of the premature antibody. The refolded scFv could provide a platform for protein engineering for the clinical application for diagnosis of heart disease and the development of a continuous biosensor.     

Combined Effect of Agitation/Aeration and Fed‐Batch Strategy on Ubiquin‐ one‐10 Production by Pseudomonas diminuta

The effects of aeration rate and agitation speed on ubiquinone‐10 (CoQ10) submerged fermentation in a stirred‐tank reactor using Pseudomonas diminuta NCIM 2865 were investigated. CoQ10 production, biomass formation, glycerol utilization, and volumetric mass transfer coefficient (k_La) were affected by both aeration and agitation. An agitation speed of 400 rpm and aeration rate of 0.5 vvm supported the maximum production (38.56 mg L^–1) of CoQ10 during batch fermentation. The fermentation run supporting maximum production had an k_La of 27.07 h^–1 with the highest specific productivity and CoQ10 yield of 0.064 mg g^–1h^–1 and 0.96 mg g^–1 glycerol, respectively. Fermentation kinetics performed under optimum aeration and agitation showed the growth‐associated constant (a = 5.067 mg g^–1) to be higher than the nongrowth‐associated constant (β = 0.0242 mg g^–1h^–1). These results were successfully utilized for the development of fed‐batch fermentation, which increased the CoQ10 production from 38.56 mg L^–1 to 42.85 mg L^–1.     

NO Scavenging through Reductive Nitrosylation of Ferric Mycobacterium tuberculosis and Homo sapiens Nitrobindins

Ferric nitrobindins (Nbs) selectively bind NO and catalyze the conversion of peroxynitrite to nitrate. In this study, we show that NO scavenging occurs through the reductive nitrosylation of ferric Mycobacterium tuberculosis and Homo sapiens nitrobindins (Mt-Nb(III) and Hs-Nb(III), respectively). The conversion of Mt-Nb(III) and Hs-Nb(III) to Mt-Nb(II)-NO and Hs-Nb(II)-NO, respectively, is a monophasic process, suggesting that over the explored NO concentration range (between 2.5 × 10⁻⁵ and 1.0 × 10⁻³ M), NO binding is lost in the mixing time (i.e., ^NOk_on ≥ 1.0 × 10⁶ M⁻¹ s⁻¹). The pseudo-first-order rate constant for the reductive nitrosylation of Mt-Nb(III) and Hs-Nb(III) (i.e., k) is not linearly dependent on the NO concentration but tends to level off, with a rate-limiting step (i.e., k_lim) whose values increase linearly with [OH⁻]. This indicates that the conversion of Mt-Nb(III) and Hs-Nb(III) to Mt-Nb(II)-NO and Hs-Nb(II)-NO, respectively, is limited by the OH⁻-based catalysis. From the dependence of k_lim on [OH⁻], the values of the second-order rate constant k_OH− for the reductive nitrosylation of Mt-Nb(III)-NO and Hs-Nb(III)-NO were obtained (4.9 (±0.5) × 10³ M⁻¹ s⁻¹ and 6.9 (±0.8) × 10³ M⁻¹ s⁻¹, respectively). This process leads to the inactivation of two NO molecules: one being converted to HNO₂ and another being tightly bound to the ferrous heme-Fe(II) atom.     

Ultrastable Covalent Triazine Organic Framework Based on Anthracene Moiety as Platform for High-Performance Carbon Dioxide Adsorption and Supercapacitors

Conductive and porous nitrogen-rich materials have great potential as supercapacitor electrode materials. The exceptional efficiency of such compounds, however, is dependent on their larger surface area and the level of nitrogen doping. To address these issues, we synthesized a porous covalent triazine framework (An-CTFs) based on 9,10-dicyanoanthracene (An-CN) units through an ionothermal reaction in the presence of different molar ratios of molten zinc chloride (ZnCl₂) at 400 and 500 °C, yielding An-CTF-10-400, An-CTF-20-400, An-CTF-10-500, and An-CTF-20-500 microporous materials. According to N₂ adsorption–desorption analyses (BET), these An-CTFs produced exceptionally high specific surface areas ranging from 406–751 m²·g⁻¹. Furthermore, An-CTF-10-500 had a capacitance of 589 F·g⁻¹, remarkable cycle stability up to 5000 cycles, up to 95% capacity retention, and strong CO₂ adsorption capacity up to 5.65 mmol·g⁻¹ at 273 K. As a result, our An-CTFs are a good alternative for both electrochemical energy storage and CO₂ uptake.     

重组大肠杆菌分批-补料高密度发酵生产类人胶原蛋白的动力学

The kinetics of batch and fed-batch cultures of recombinant Escherichia coli producing human-like collagen was investigated. In the batch culture, a kinetic model of a simple growth-association system was concluded without consideration of cell endogeneous metabolism. The cell lag time, the maximum specific growth rate and Yx/s were determined as 1.75h, 0.65h^-1 and 0.51g·g^-1, respectively. In the fed-batch culture, different specific growth rates were set at （0.15, 0.2, 0.25h^-1） by the method of pseudo-exponential feeding, and the expressions for the specific rate of substrate consumption, the growth kinetics and the product formation kinetics of each phase were obtained. The result shows that the concentrations of cell and product can reach 77.5g·L^-1 and 10.2g·L^-1 respectively. The modal predictions are in good agreement with the experimental data.     

Magnetic Core–Shell Molecularly Imprinted Nano-Conjugates for Extraction of Antazoline and Hydroxyantazoline from Human Plasma—Material Characterization,Theoretical Analysis and Pharmacokinetics

The aim of this study was to develop magnetic molecularly imprinted nano-conjugate sorbent for effective dispersive solid phase extraction of antazoline (ANT) and its metabolite, hydroxyantazoline (ANT-OH) in analytical method employing liquid chromatography coupled with mass spectrometry method. The core–shell material was characterized in terms of adsorption properties, morphology and structure. The heterogeneous population of adsorption sites towards ANT-OH was characterized by two K_d and two B_max values: K_d (1) = 0.319 µg L⁻¹ and B_max (1) = 0.240 μg g⁻¹, and K_d (2) = 34.6 µg L⁻¹ and B_max (2) = 5.82 μg g⁻¹. The elemental composition of magnetic sorbent was as follows: 17.55, 37.33, 9.14, 34.94 wt% for Si, C, Fe and O, respectively. The extraction protocol was optimized, and the obtained results were explained using theoretical analysis. Finally, the analytical method was validated prior to application to pharmacokinetic study in which the ANT was administrated intravenously to three healthy volunteers. The results prove that the novel sorbent could be useful in extraction of ANT and ANT-OH from human plasma and that the analytical strategy could be a versatile tool to explain a potential and pharmacological activity of ANT and ANT-OH.     

Unusually Fast bis-Histidyl Coordination in a Plant Hemoglobin

The recently identified nonsymbiotic hemoglobin gene MtGlb1-2 of the legume Medicago truncatula possesses unique properties as it generates four alternative splice forms encoding proteins with one or two heme domains. Here we investigate the ligand binding kinetics of MtGlb1-2.1 and MtGlb1-2.4, bearing two hemes and one heme, respectively. Unexpectedly, the overall time-course of ligand rebinding was unusually fast. Thus, we complemented nanosecond laser flash photolysis kinetics with data collected with a hybrid femtosecond–nanosecond pump–probe setup. Most photodissociated ligands are rebound geminately within a few nanoseconds, which leads to rates of the bimolecular rebinding to pentacoordinate species in the 10⁸ M⁻¹s⁻¹ range. Binding of the distal histidine to the heme competes with CO rebinding with extremely high rates (k_h ~ 10⁵ s⁻¹). Histidine dissociation from the heme occurs with comparable rates, thus resulting in moderate equilibrium binding constants (K_H ~ 1). The rate constants for ligation and deligation of distal histidine to the heme are the highest reported for any plant or vertebrate globin. The combination of microscopic rates results in unusually high overall ligand binding rate constants, a fact that contributes to explaining at the mechanistic level the extremely high reactivity of these proteins toward the physiological ligands oxygen, nitric oxide and nitrite.     

Adsorption of Basic Dyes on β-Cyclodextrin Functionalized Poly (Styrene-Alt-Maleic Anhydride)

A new [#x003B2]-cyclodextrin functionalized poly (styrene-alt-maleic anhydride) was synthesized for removal of basic fuchsin (BF) and methylene blue (MB) from water via grafting reaction of [#x003B2]-cyclodextrin onto poly (styrene-alt-maleic anhydride) and then acylation with chloroacetyl chloride. Its structure was characterized. At a dosage of 0.25 g[#x000B7]L^[#x02212]1, pH 6, and 25[#x000B0]C, adsorption equilibrium was reached in 600 min and maximum adsorption quantities to BF and MB were 295 mg[#x000B7]g^[#x02212]1 and 528 mg[#x000B7]g^[#x02212]1, respectively. The equilibrium data fitted the Langmuir isotherm and the adsorption kinetics data followed the pseudo-second-order model. Adsorption processes were endothermic, entropy gained, and spontaneous in nature within 288-308 K.     

A Comparative Study on the Biosorption of Cd2+ onto Paecilomyces lilacinus XLA and Mucoromycote sp. XLC

The filamentous fungi XLA and XLC isolated from Cd-contaminated soil were identified morphologically and phylogenetically as Paecilomyces lilacinus and Mucoromycote sp., respectively. The minimum inhibitory concentrations (MICs) of Cd²⁺, Co²⁺, Cu²⁺, Zn²⁺, Cr³⁺ and Cr⁶⁺ in minimum mineral (MM) medium agar plates were 29,786, 2945, 9425, 5080, 1785 and 204 mg·L⁻¹ for XLA and 11,240, 884, 9100, 2540, 3060 and 51 mg·L⁻¹ for XLC, respectively. Favorable biosorption conditions for adsorption of Cd²⁺ by the tested fungi were investigated. Efficient performances of the biosorbents were described using Langmuir isotherm model, and the predicted maximum biosorption capacities for Cd²⁺ were 77.61 mg·g⁻¹ of XLA and 79.67 mg·g⁻¹of XLC. Experiments on desorption potential of biosorbents validated their efficacy at a large scale. Results showed that XLA obtained a desorption rate of 84.7% by 2% EDTA and XLC gained a desorption rate of 78.9% by 0.1 M HCl. Analysis by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) and X-ray photoelectron spectroscopy (XPS) suggested that groups of C–N, COO– for XLA and C–N, CH₂ and phosphate for XLC were the dominant binding sites for Cd²⁺ biosorption. Our results indicated that the fungus XLA, rather than XLC, could potentially be used as an inexpensive, eco-friendly and effective bioremediation agent for the removal of Cd²⁺ from wastewater.     

Optimization of Synthesis Parameters for Mesoporous Shell Formation on Magnetic Nanocores and Their Application as Nanocarriers for Docetaxel Cancer Drug

In this work, Fe₃O₄@SiO₂ nanoparticles were coated with mesoporous silica shell by S⁻N⁺I⁻ pathway by using anionic surfactant (S⁻) and co-structure directing agent (N⁺). The role of co-structure directing agent (CSDA) is to assist the electrostatic interaction between negatively charged silica layers and the negatively charged surfactant molecules. Prior to the mesoporous shell formation step, magnetic cores were coated with a dense silica layer to prevent iron oxide cores from leaching into the mother system under any acidic circumstances. However, it was found that both dense and mesoporous coating parameters affect the textural properties of the produced mesoporous silica shell (i.e., surface area, pore volume and shell thickness). The synthesized Fe₃O₄@SiO₂@m-SiO₂ (MCMSS) nanoparticles have been characterized by low-angle X-ray diffraction, transmission electron microscopy (TEM), and N₂ adsorption-desorption analysis, and magnetic properties. The synthesized particles had dense and mesoporous silica shells of 8–37 nm and 26–50 nm, respectively. Furthermore, MCMSS possessed surface area of ca. 259–621 m²·g⁻¹, and pore volume of ca. 0.216–0.443 cc·g⁻¹. MCMSS showed docetaxcel cancer drug storage capacity of 25–33 w/w% and possessed control release from their mesochannels which suggest them as proper nanocarriers for docetaxcel molecules.     

Kinetic Study on the Reactivity of Azanone (HNO) toward Cyclic C-Nucleophiles

Azanone (HNO) is an elusive electrophilic reactive nitrogen species of growing pharmacological and biological significance. Here, we present a comparative kinetic study of HNO reactivity toward selected cyclic C-nucleophiles under aqueous conditions at pH 7.4. We applied the competition kinetics method, which is based on the use of a fluorescein-derived boronate probe FlBA and two parallel HNO reactions: with the studied scavenger or with O₂ (k = 1.8 × 10⁴ M⁻¹s⁻¹). We determined the second-order rate constants of HNO reactions with 13 structurally diverse C-nucleophiles (k = 33–20,000 M⁻¹s⁻¹). The results show that the reactivity of HNO toward C-nucleophiles depends strongly on the structure of the scavenger. The data are supported with quantum mechanical calculations. A comprehensive discussion of the HNO reaction with C-nucleophiles is provided.     

Mass transfer to volumetric electrodes with two-phase flow

Experimental studies of mass transfer were conducted in stacked screens with a gas-liquid mixture flowing through the bed. Depending on the gas and liquid flow rates and on the geometric characteristics of the screens, different flow regimes are obtained. In the heterogeneous flow regime the gas phase controls mass transfer, meanwhile in the transition and bubbling flow regimes the influence of the liquid flow prevails. Appropriate dimensionless groups correlate the mass transfer coefficients with the pertinent variables for the different regimes.Nomenclature A electrode area (cm²) - A ₁ surface area of one screen (cm²) - c _o bulk concentration (mol cm^–3) - D diffusivity (cm²s^–1) - d particle or wire diameter (cm) - F Faraday's constant - i limiting current (A) - k mass transfer coefficient (cm s^–1) - N distance between wires (cm) - Re _g Reynolds number for gas flow,Re _g=u _g R _h v _g ^–1 - Ré _g Reynolds number for gas flow,Re ₁=u ₁ R _h v ₁ ^–1 - Re ₁ Reynolds number for liquid flow,Re' ₁=u ₁ dv ₁ ^–1 - Ré ₁ Reynolds number for liquid flowRe ₁=u ₁ R _h v ₁ ^–1 - R _h hydraulic radius of screen bed (cm) - S _c Schmidt number,Sc=v ₁ D ^–1 - Sh Sherwood number,Sh=kdD ^–1 - Sh ₀ Sherwood number without gas,Sh ₀ =kdD ^–1 - u _g superficial gas velocity (cm s^–1) - u ₁ superficial liquid velocity (cm s^–1) - screen thickness (cm) - porosity - v kinematic viscosity (cm²s^–1) - specific area (cm^–1)     

Thiol-functionalized magnetite/graphene oxide hybrid as a reusable adsorbent for Hg2+ removal

A thiol-functionalized magnetite/graphene oxide (MGO) hybrid as an adsorbent of Hg²⁺ was successfully synthesized by a two-step reaction. It exhibited a higher adsorption capacity compared to the bare graphene oxide and MGO due to the combined adsorption of thiol groups and magnetite nanocrystals. Its capacity reached 289.9 mg g^-1 in a solution with an initial Hg²⁺ concentration of 100 mg l^-1. After being exchanged with H⁺, the adsorbent could be reused. The adsorption of Hg²⁺ by the thiol-functionalized MGO fits well with the Freundlich isotherm model and followed pseudo-second-order kinetics.     

Reduced graphene oxide-TiO2 nanocomposite as a promising visible-light-active photocatalyst for the conversion of carbon dioxide

Photocatalytic reduction of carbon dioxide (CO₂) into hydrocarbon fuels such as methane is an attractive strategy for simultaneously harvesting solar energy and capturing this major greenhouse gas. Incessant research interest has been devoted to preparing graphene-based semiconductor nanocomposites as photocatalysts for a variety of applications. In this work, reduced graphene oxide (rGO)-TiO₂ hybrid nanocrystals were fabricated through a novel and simple solvothermal synthetic route. Anatase TiO₂ particles with an average diameter of 12 nm were uniformly dispersed on the rGO sheet. Slow hydrolysis reaction was successfully attained through the use of ethylene glycol and acetic acid mixed solvents coupled with an additional cooling step. The prepared rGO-TiO₂ nanocomposites exhibited superior photocatalytic activity (0.135 μmol g_cat⁻¹ h⁻¹) in the reduction of CO₂ over graphite oxide and pure anatase. The intimate contact between TiO₂ and rGO was proposed to accelerate the transfer of photogenerated electrons on TiO₂ to rGO, leading to an effective charge anti-recombination and thus enhancing the photocatalytic activity. Furthermore, our photocatalysts were found to be active even under the irradiation of low-power energy-saving light bulbs, which renders the entire process economically and practically feasible.     

Orientation Polarization Spectroscopy—Toward an Atomistic Understanding of Dielectric Relaxation Processes

The theory of orientation polarization and dielectric relaxation was developed by P. Debye more than 100 years ago. It is based on approximating a molecule by a sphere having one or more dipole moments. By that the detailed intra- and intermolecular interactions are explicitly not taken into consideration. In this article, the principal limitations of the Debye approximation are discussed. Taking advantage of the molecular specificity of the infrared (IR) spectral range, measurements of the specific IR absorption of the stretching vibration υ(OH) (at 3370 cm⁻¹) and the asymmetric υ_as(CH₂) (at 2862.9 cm⁻¹) are performed in dependence on the frequency and the strength of external electric fields and at varying temperature. The observed effects are interpreted as caused by orientation polarization of the OH and the adjacent CH₂ moieties.