Characterization and electrochemical studies of Nafion/nano-TiO2 film modified electrodes

A nano-TiO₂ film from stable aqueous dispersion has been modified on a glassy carbon electrode (GCE), and was characterized by scanning electron microscopy (SEM) and surface-enhanced Raman spectroscopy (SERS). This nanostructured film exhibits an ability to improve the electron-transfer rate between electrode and dopamine (DA), and electrocatalyze the redox of DA. The electrocatalytical behavior of DA was examined by cyclic voltammetry (CV). Combined with Nafion, the bilayer-modified electrode (N/T/GCE) gives a sensitive voltammetric response of DA regardless of excess ascorbic acid (AA). Electrochemical impedance spectroscopy (EIS) at a fixed potential was performed at variously treated GCEs. The mechanism of the electrode reaction of DA at N/T/GCE and the equivalent circuits of different GCEs have been proposed.     

TiO2 photocatalysts and diamond electrodes

Photocatalysis and electroanalysis are two seemingly disparate research areas, but they are linked by the fact that both involve the use of well-known materials, TiO₂ and diamond, respectively, in new ways in the service of both environmental and medical sciences. In the present article, recent developments in the area of TiO₂ photocatalysis and diamond electrochemistry are summarized, with emphasis on our findings at the University of Tokyo. In the photocatalysis section, we present the fundamental aspects of TiO₂ photocatalysis and its practical applications, including air purification, self-cleaning surfaces and transparent superhydrophilic coatings. The diamond electrochemistry section deals with the electrochemical characterization and applications of diamond electrodes, which exhibit high sensitivity and excellent stability for electroanalysis, in contrast to conventional electrode materials. A particularly interesting environmental application of diamond electrodes has been developed; this involves the trace analysis of lead without the use of mercury.     

TiO2, TiO2/Ag and TiO2/Au photocatalysts prepared by spray pyrolysis

TiO₂, TiO₂/Ag and TiO₂/Au photocatalysts exhibiting a hollow spherical morphology were prepared by spray pyrolysis of aqueous solutions of titanium citrate complex and titanium oxalate precursors in one-step. Effects of precursor concentration and spray pyrolysis temperature were investigated. By subsequent heat treatment, photocatalysts with phase compositions from 10 to 100% rutile and crystallite sizes from 12 to 120 nm were obtained. A correlation between precursor concentration and size of the hollow spherical agglomerates obtained during spray pyrolysis was established. The anatase to rutile transformation was enhanced with metal incorporations and increased precursor concentration. The photocatalytic activity was evaluated by oxidation of methylene blue under UV-irradiation. As-prepared TiO₂ particles with large amounts of amorphous phase and organic residuals showed similar photocatalytic activity as the commercial Degussa P25. The metal incorporated samples showed comparable photocatalytic activity to the pure TiO₂ photocatalysts.     

Disinfection of spring water and secondary treated municipal wastewater by TiO2 photocatalysis

The photocatalytic disinfection of spring water and secondary treated municipal wastewater by means of UV-A irradiation over TiO₂ suspensions was investigated. Water samples were taken from a spring supplying water to the city of Chania, Western Crete, Greece, while wastewater samples were collected from the outlet of the secondary treatment of Chania municipal wastewater treatment plant. The effect of various operating parameters such as photocatalyst type (rutile, anatase, mixture of anatase and rutile) and concentration (0.5-1 g/L), contact time (up to 60 min) and sample pH (6-8) on the disinfection as assessed in terms of faecal indicator microorganisms (total coliforms and enterococci) inactivation was examined. A commercially available Degussa P25 TiO₂ powder, consisting of 75% anatase and 25% rutile, was found substantially more active than pure anatase or rutile for both groups of bacteria inactivation which increased with increasing contact time and catalyst concentration, whereas small pH changes had little effect on destruction. For both groups of bacteria tested, inactivation followed a first order kinetic expression with the gram positive Enterococcus sp. being considerably more resistant to photocatalytic disinfection than total coliforms.     

Synthesis and electrochemical properties of CeO2 nanoparticle modified TiO2 nanotube arrays

In this paper, a cerium dioxide (CeO₂) modified titanium dioxide (TiO₂) nanotube array film was fabricated by electrodeposition of CeO₂ nanoparticles onto an anodized TiO₂ nanotube array. The structural investigation by X-ray diffraction, scanning electron microscopy and transmission electron microscopy indicated that the CeO₂ nanoparticles grew uniformly on the walls of the TiO₂ nanotubes. The composite was composed of cubic-phase CeO₂ crystallites and anatase-phase TiO₂ after annealing at 450 °C. The cyclic voltammetry and chronoamperometric charge/discharge measurement results indicated that the CeO₂ modification obviously increased the charge storage capacity of the TiO₂ nanotubes. The charge transfer process at the surface, that is, the pseudocapacitance, was the dominate mechanism of the charge storage in CeO₂-modified TiO₂ nanotubes. The greater number of surface active sites resulting from uniform application of the CeO₂ nanoparticles to the well-aligned TiO₂ nanotubes contributed to the enhancement of the charge storage density.     

Preparation and characterization of CeO2/TiO2 nanoparticles by flame spray pyrolysis

Nanocrystalline TiO₂, CeO₂ and CeO₂-doped TiO₂ have been successfully prepared by one-step flame spray pyrolysis (FSP). Resulting powders were characterized with X-ray diffraction (XRD), N₂-physisorption, Transmission Electron Microscopy (TEM) and UV-Vis spectrophotometry. The TiO₂ and CeO₂-doped TiO₂ nanopowders were composed of single-crystalline spherical particles with as-prepared primary particle size of 10-13 nm for Ce doping concentrations of 5-50 at%, while square-shape particles with average size around 9 nm were only observed from flame-made CeO₂. The adsorption edge of resulting powder was shifted from 388 to 467 nm as the Ce content increased from 0 to 30 at% and there was an optimal Ce content in association with the maximum absorbance. This effect is due to the insertion of Ce^3+/4+ in the TiO₂ matrix, which generated an n-type impurity band.     

Properties of sol-gel SnO2/TiO2 electrodes and their photoelectrocatalytic activities under UV and visible light illumination

A visible light active binary SnO₂-TiO₂ composite was successfully prepared by a sol-gel method and deposited on Ti sheet as a photoanode to degrade orange II dye. Titanium and SnO₂ can promote the development of rutile phase of TiO₂ and inhibit the formation of anatase phase of TiO₂. Formation of SnO₂ crystalline is insignificant even when the calcination temperature increases to 700 °C. Heterogenized interface between SnO₂ and TiO₂ inhibits growth of TiO₂ linkage and leads to the particle-filled surface morphology of SnO₂-containing films. The carbonaceous, Ti-O-C bonds and Ti³⁺ species are likely to account for the photoabsorption and photoelectrocatalytic (PEC) activity under visible light illumination. The electrode with 30% SnO₂ exhibits higher photocurrent when compared with those in the region of 0-50%. The 600 °C-calcined SnO₂-TiO₂ electrode indicates higher activity when compared with those at 400, 500, 700 and 800 °C. PEC degradation of orange II follows the Langmuir-Hinshelwood model and takes place much effectively in a solution of pH 3.0 than those in pH 7.0 and pH 11.0.     

Structural colors from TiO2/SiO2 multilayer flakes prepared by sol-gel process

Preparation of TiO₂/SiO₂ multilayer flakes and their application to decorative powders were investigated. In contrast to conventional products prepared through the multicoating of core platelets, the coreless TiO₂/SiO₂ multilayer flakes were prepared by detaching multilayer films from their substrates. These flakes exhibited structural colors, when the optical path length of both the TiO₂ and SiO₂ layers are adjusted to be one fourth of the wavelength of visible light. A multicoating of more than five layers resulted in the propagation of cracks, which prevented the preparation of thick flakes. Paint films fabricated using the multilayer flakes and acrylic resins showed reflectance spectra that were comparable with those obtained for multicoatings on substrates.     

Physical and electrochemical characterization of nanostructured composites formed by TiO2 templates and PEDOT-PPS films

We report the physical and electrochemical characterization of nanostructured composites formed by TiO₂ templates and PEDOT-PPS films. TiO₂ templates were prepared by sol-gel techniques using TiCl₄ and TiF₄ as the titania precursors, and also by adding a soluble polymer at the initial stages of the TiCl₄ sol-gel synthesis to induce porous oxide networks. The effect of different precursors and annealing environments in the crystallite and particle size of the templates was followed by XRD and SEM studies, and correlated to the electrochemical properties of TiO₂ templates dip-coated in a conducting polymer solution (PEDOT-PSS 1.3%). We found that the microstructure had a strong influence in the adsorption of the conductive polymer, which shows superior electrochemical activity in matrices with abundant surface hydroxylation, broad particle size distribution and residual carbon. Cyclic voltammetry and electrochemical impedance data revealed the differences between the several TiO₂/PEDOT-PSS systems, with the best performance observed in systems based on TiO₂ templates obtained from the TiCl₄ sol-gel route and containing residual mesoporous carbon.     

Preparation and electrochemical capacitance of RuO2/TiO2 nanotubes composites

In this paper, RuO₂/TiO₂ nanotubes composites were synthesized by loading various amounts of RuO₂ on TiO₂ nanotubes. The symmetric supercapacitors based on these nanocomposites were fabricated by using gel polymer PVA-H₃PO₄-H₂O as electrolyte. The electrochemical capacitance performance of the nanocomposites in these supercapacitors was investigated by current-potential responses, galvanostatic charge-discharge tests and electrochemical impedance spectroscopy. The results show that the three dimensional nanotube network of TiO₂ offers a solid support structure for active materials RuO₂, allows the active material to be readily accessible (available) for electrochemical reactions, and improves the efficiency of the active materials. A maximum specific capacitance of 1263 F/g was obtained for the RuO₂ which was loading on TiO₂ nanotubes.     

Effect of TiO2 supporting layer on Fe2O3 photoanode for efficient water splitting

For an electrochemical water splitting system, titanate nanotubular particles with a thickness of ∼700 nm produced by a hydrothermal process were repetitively coated on fluorine-doped tin oxide (FTO) glass via layer-by-layer self-assembly method. The obtained titanate/FTO films were dipped in aqueous Fe solution, followed by heat treatment for crystallization at 500 °C for 10 min in air. The UV–vis absorbance of the Fe-oxide/titanate/FTO film showed a red-shifted spectrum compared with the TiO₂/FTO coated film; this red shift was achieved by the formation of thin hematite-Fe₂O₃ and anatase-TiO₂ phases verified using X-ray diffraction and Raman results. The cyclic voltammetry results of the Fe₂O₃/TiO₂/FTO films showed distinct reversible cycle characteristics with large oxidation–reduction peaks with low onset voltage of I–V characteristics under UV–vis light illumination. The prepared Fe₂O₃/TiO₂/FTO film showed much higher photocurrent densities for more efficient water splitting under UV–vis light illumination than did the Fe₂O₃/FTO film. Its maximum photocurrent was almost 3.5 times higher than that obtained with Fe₂O₃/FTO film because of the easy electron collection in the current collector. The large current collection was due to the existence of a TiO₂ base layer beneath the Fe₂O₃ layer.     

Influence of TiO2 and CeO2 on the hydrogenation activity of bulk Ni2P

TiO₂- and CeO₂-promoted bulk Ni₂P catalysts were prepared by impregnation and in-situ H₂ temperature-programmed reduction method. The prepared catalysts were characterized by XRD and XPS. The hydrogenation activities of the catalysts were studied using 1.5 wt.% 1-heptene in toluene and 1.0 wt.% phenylacetylene in ethanol as the model feeds. The results indicate that bulk Ni₂P possesses low hydrogenation activity but is tunable by simply controlling the content of the additives (TiO₂ or CeO₂), suggesting that TiO₂ and CeO₂ are effective promoters to enhance the hydrogenation activity of Ni₂P.     

Novel graphite/TiO2 electrochemical cells as a safe electric energy storage system

A graphite/TiO₂ full cell has been developed as a new safety energy storage system using a highly safety process. The crystal structures of the anatase TiO₂ electrode have been investigated with respect to the performance of the electrodes. Due to the large anion intercalation into the graphite positive electrode, the possible charging potential can be raised to around 5.3 V against the Li/Li⁺ electrode, which is a higher charging voltage than lithium-ion batteries (maximum voltage is around 4.3 V vs. Li/Li⁺). In situ XRD measurements have been carried out on both the cathode and anode electrodes of the graphite/TiO₂ cell during the charge process to elucidate the intercalation mechanism.     

Aerobic oxidation of alcohols over Au/TiO2: An insight on the promotion effect of water on the catalytic activity of Au/TiO2

The unique and significant promotion effect of water has been evidenced by the selective oxidation of benzyl alcohol to benzaldehyde over Au/TiO₂ catalysts. Water has dual promotional functions in the reaction system: to help form unique microdroplets in a multiphase reaction system and to assist the oxygen adsorption and activation. The conversion of benzyl alcohol at a molar ratio of water to solvent (p-xylene) of 7 is 7 times higher than in the absence of water. The present work has highlighted the potential of Au/TiO₂ catalysts in aerobic oxidation of alcohols in the unique multiphase reaction system with water as promoting solvent.     

Tailoring high-surface-area nanocrystalline TiO2 polymorphs for high-power Li ion battery electrodes

The crystallization and morphology of brookite and anatase titania (TiO₂) were controlled using the urea-mediated hydrolysis/precipitation route in the presence of the Ti³⁺ ions. Without the strong complexing agents and the non-hydrothermal conditions, simple alterations to the urea concentration led to the synthesis from brookite nanorods to anatase nanoflowers at a low temperature below 100 °C, whereas the BET specific surface area evolved from 102 to 268 m² g⁻¹, respectively. A possible formation mechanism was also proposed for these TiO₂ nanostructures. The excellent reversible capacity and rate capability were achieved for the anatase nanoflowers because of the small crystallite size and significantly large surface area.     

Synthesis and electrochemical studies of a layered spheric TiO2 through low temperature solvothermal method

This paper demonstrates a low temperature solvothermal method for the synthesis of a layered spheric TiO₂. The crystal structure and morphology of the material were characterized by using X-ray diffraction (XRD) and scanning electron miscopy (SEM). Electrochemical performances of the TiO₂ when used as anode material in lithium ion batteries were investigated by galvanostatic charge/discharge and cyclic voltammetry experiments. A discharge capacity of 179 mAh g⁻¹ was obtained in the potential range between 3.0 and 1.5 V. No significant capacity decay was observed in the successive 30 cycles showing satisfactory cycling performance of the electrode.     

TiO2 nanotubes and CNT–TiO2 hybrid materials for the photocatalytic oxidation of propene at low concentration

In this work, we investigated titanium dioxide (TiO₂) nanotubes and CNT–TiO₂ hybrid materials for the photocatalytic oxidation (PCO) of propene at low concentration (100 ppmv) in gaseous phase. The materials were prepared via sol–gel method using sacrificial multi-walled carbon nanotubes (CNT) as templates and subsequent heat treatments to obtain the desired crystalline phase (anatase, rutile or a mixture of both) and eventually to remove the carbon template. We also studied rutile nanotubes for the first time and demonstrate that the activity strongly depends on the crystalline composition, following rutile < anatase < anatase/rutile mixture. The enhanced activity of the anatase–rutile mixture is attributed to the decrease in the electron–hole pair recombination due to the multiphasic nature of the particles. The key result of this work is the exceptional performance of the CNT–TiO₂ hybrid, which yielded the highest observed photocatalytic activity. The improved performance is attributed to synergistic effects due to the hybrid nature of the material, resulting in small anatase crystalline sizes (CNT act as heat sinks) and a reduced electron–hole pair recombination rate (CNTs act as electron traps). These results demonstrate the great potential of hybrid materials and stimulate further research on CNT-inorganic hybrid materials in photocatalysis and related areas.     

Enhanced visible light-induced photoelectrocatalytic degradation of phenol by carbon nanotube-doped TiO2 electrodes

We used a modified sol-gel method to prepare titanium dioxide and multi-walled carbon nanotube (CNT) composites that we subsequently deposited onto indium tin oxide (ITO) conductive glass plates. We characterized these CNT-doped TiO₂ (CNT-TiO₂) films using X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and diffuse reflectance UV-vis spectroscopy. The photoelectrocatalytic (PEC) activity of the composites was evaluated through their ability to mediate the degradation of phenol. XRD measurements indicated that the TiO₂ component existed solely in the anatase phase and that the crystallinity of the CNTs was low. XPS indicated that carbon atoms could substitute for both oxygen and titanium atoms in the TiO₂ lattice to form Ti-C and Ti-O-C structures, which were responsible for the extra photoabsorption and PEC activity under illumination with visible light, in addition to those provided by the CNTs and carbonaceous and Ti³⁺ species. An interphase interaction between TiO₂ and the CNTs elevated the photoabsorbance of the composites in the visible light region. A sample of TiO₂ doped with 10% CNTs and calcined at 400 °C exhibited the highest photocurrent and PEC efficiency. We systematically investigated the effects of several parameters of the PEC process, including the applied potential and pH, on the phenol conversion.     

Synthesis and electrochemiluminescence of the CeO2/TiO2 composite

CeO₂/TiO₂ composite with kernel–shell structure was synthesized by a sol–gel process. The characterization results show that the composite is made up of anatase phase TiO₂ and cubic system CeO₂. The electrochemiluminescence (ECL) behavior of the CeO₂/TiO₂ composite was studied by a cyclic voltammetry in the presence of persulfate, and the effect factors on ECL emission were discussed. Based on a series of experiments, it is proposed that the strong dual ECL emission produced by the CeO₂/TiO₂ composite resulted from the benefit ECL effect of interface heterojunction in composite.