共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
全光纤单芯语音传输系统及其保密性研究 总被引:1,自引:0,他引:1
提出了一种全新的全光纤语音传输方法。该方法利用光纤的光弹效应进行语音信号的录入,利用全光纤干涉系统进行信号的解调,成功实现了语音信号的长距离传输。该通信方式具有抗电磁干扰能力强、保密性好等优点。在对系统的工作原理及其保密性传输机理分析的基础上,通过实验验证了系统的T作原理,成功再现了300~3400Hz范围内的单频正弦信号及实际语音信号的录入、传输与还原过程,得到稳定的波形对比曲线及清晰的音质效果。该系统有望应用于距离为40km的点对点保密通信。 相似文献
3.
4.
5.
介绍了在辐射环境中研究应用前景较好的几种主要的光纤传感器.结合已初步完成的布里渊传感器的相关实验,详细阐述了光纤布拉格光栅传感器、法布里-珀罗光纤传感器、分布式光纤传感器和传输光纤在受到辐射时其性能发生变化的研究进展.简要分析了辐射对光纤传感器性能影响的几种不同观点,并分别展望了光纤传感器在辐射环境中的应用前景. 相似文献
6.
本文提出了应用光纤传感技术对两相流体流测量误差进行补偿的新方法。传感机理为两相流体折射率对弯曲光纤的传输光功率的调制原理。在分析光纤弯曲波导传输光能损耗与弯曲半径、外界折射率等因素关系的基础上,提出U型结构的光纤传感器系统,并将其应用于两相流体流量测量的误差矫正中,进行了初步研究和探讨。 相似文献
7.
8.
9.
10.
《中国激光》2016,(9)
干涉型光纤传感器是一种高灵敏度的传感器,在许多领域都具有重要应用价值,而偏振衰落是这种传感器中需要解决的一个重要问题。提出采用脉冲正交偏振切换及基于相位生成载波(PGC)的信号合成算法来实现抗偏振衰落。阐述了正交偏振切换方法的基本理论,分析了以PGC解调为基础的正交偏振切换合成算法的原理,搭建了实验系统进行实验研究。结果表明,当光纤中偏振态受到扰动时,通过正交偏振切换及合成算法,合成的结果等效干涉度可以稳定在0.93~0.94之间;解调结果的噪声可以达到四路偏振通道噪声的最低水平。该方法可以消除传输光纤中偏振扰动所造成的低频相位漂移,使解调结果不受传输光纤中偏振态扰动的影响。长时间的噪声监测结果表明,PGC调制频率为8kHz时,系统噪声达到了-96dB/槡Hz(1kHz),与同一系统中采用法拉第旋镜作为反射镜测得的本底噪声相当。该方法为解决干涉型光纤传感器时分复用阵列,特别是基于光纤光栅的干涉型准分布式光纤传感器和分布式传感系统中的偏振衰落问题提供了一种可行的途径。 相似文献
11.
基于ARM和GPRS的光纤直放站监控系统的设计与实现 总被引:1,自引:0,他引:1
为了改善当前直放站监控系统处理数据速度慢以及传输数据量小等缺点,基于ARM控制平台和GPRS数据传输技术,设计并实现了光纤直放站监控系统;论证了监控系统的设计方案,详细分析了其硬件系统构成和外围接口电路,阐释了其软件整体架构和工作流程,本设备实验结果运行良好,提高了光纤直放站的稳定性和可靠性,为光纤直放站系统的监控提供了一种新的方法。 相似文献
12.
干涉分布式光纤水下长输气管道泄漏检测系统设计 总被引:2,自引:1,他引:1
介绍了一种基于马赫曾德尔和萨尼亚克混合干涉仪原理的分布式光纤干涉测量架构,可实时对管道进行泄漏检测和定位。阐述了该架构的检测原理和泄漏点的定位方法,并利用小波变换算法对采集的泄漏信号进行分析处理。对全长为3.994km的感测光纤进行了管道泄漏检测实验并重复做了10次测试实验。实验结果表明,该系统运行稳定且泄漏检测的最大相对定位误差为1.47%。 相似文献
13.
14.
刘英明 《光纤与电缆及其应用技术》2009,(6):18-21
介绍一种用于光纤水听器阵列的时分复用(TDM)及解复用信号处理系统,该系统基于PC机,设计开发方便、使用灵活。采用Labview编写的信号处理软件可实现8单元水听器阵列的时分复用及解复用。 相似文献
15.
16.
基于OptiSystem软件的OCDMA系统仿真 总被引:1,自引:0,他引:1
分析了采用光素数地址码的异步OCDMA系统设计原理,阐述了OptiSystem软件针对光系统的强大仿真功能。在设计原理的基础上,采用光纤延时线编码技术给出了基于OptiSystem的异步OCDMA系统仿真模型,得出仿真结果并进行了分析,验证了系统设计的正确性和设计方案的可行性。 相似文献
17.
18.
A novel distributed optical fiber vibration-sensing system based on Mach-Zehnder interferometer has been designed and experimentally demonstrated. Firstly, the principle of Mach-Zehnder optical path interferometer technique is clarified. The output of the Mach-Zehnder interferometer is proportional to the phase shift induced by the perturbation. Secondly, the system consists of the laser diode (LD) as the light source, fiber, Mach-Zehnder optical interferometers as the sensing units, a 1×N star fiber-optic coupler, an N×1 fiber-optic coupler, a photodiode (PD) detector, and a computer used in signal processing. The entire monitoring region of this system is divided into several small zones, and each small monitoring zone is independent from each other. All of the small monitoring zones have their own sensing unit, which is defined by Mach-Zehnder optical interferometer. A series of sensing units are connected by the star fiber-optic couplers to form a whole sensing net. Thirdly, signal-processing techniques are subsequently used to calculate the phase shift to estimate whether intruders appear. The sensing system is able to locate the vibration signal simultaneously, includ-ing multiple vibrations at different positions, by employing the time-division multiplexed (TDM) technique. Finally, the operation performance of the proposed system is tested in the experiment lab with the conditions as follows: the number of the sensing units is 3, the length of the sensing fiber is 50 m, and the wavelength of the light diode is 1550nm. Based on these investigations, the fiber surrounding alert system is achieved. We have experimen-tally demonstrated that the sensing system can measure both the frequency and position of the vibration in real time, with a spatial positional resolution better than 50 m in an area of 1 km2. 相似文献
19.