Solid polymer electrolyte based on waterborne polyurethane for all‐solid‐state lithium ion batteries

A series of solid polymer electrolytes (SPEs) based on comb‐like nonionic waterborne polyurethane (NWPU) and LiClO₄ are fabricated via a solvent free process. The NWPU‐based SPEs have sufficient mechanical strength which is beneficial to their dimensional stability. Differential scanning calorimetry analysis indicates that the phase separation occurs by the addition of the lithium salt. Scanning electron microscopy and X‐ray diffraction analyses illustrate the good compatibility between LiClO₄ and NWPU. Fourier transform infrared study reveals the complicated interactions among lithium ions with the amide, carbonyl and ether groups in such SPEs. AC impedance spectroscopy shows the conductivity of the SPEs exhibiting a linear Arrhenius relationship with temperature. The ionic conductivity of the SPE with the mass content of 15% LiClO₄ (SPE15) can reach 5.44 × 10^?6 S cm^?1 at 40 °C and 2.35 ×10^?3 S cm^?1 at 140 °C. The SPE15 possesses a wide electrochemical stability window of 0–5 V (vs. Li+/Li) and thermal stability at 140 °C. The excellent properties of this new NWPU‐based SPE are a promising solid electrolyte candidate for all‐solid‐state lithium ion batteries. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45554.     

The impact of cupric ion on thermo‐oxidative degradation of chitosan

The thermal degradation of chitosan and chitosan–cupric ion compounds in air was studied using thermogravimetric and differential thermal analyses in the temperature range 30–600 °C. The impact of cupric ion on the thermo‐oxidative degradation of chitosan was investigated. Fourier transform infrared and X‐ray diffraction analyses were utilized to determine the microstructure of the chitosan–cupric ion compounds. Kinetic parameters such as activation energy, pre‐exponential factor, Gibbs energy, and enthalpy and entropy of activation were determined using the Coats–Redfern equation. The results show that the thermo‐oxidative degradation of chitosan and chitosan–cupric ion compounds is a two‐stage reaction. The impact of cupric ion on the thermo‐oxidative degradation of chitosan is significant, and all thermodynamic parameters indicate that the thermo‐oxidative degradation of chitosan and chitosan–cupric ion compounds is a non‐spontaneous process and proceeds via a mechanism involving nucleation and growth, with an Avrami–Erofeev function (A₄) with the integral form [?ln(1 ? α)]⁴. Copyright © 2010 Society of Chemical Industry     

Effect of Sintering Additives on Relative Density and Li‐ion Conductivity of Nb‐Doped Li7La3ZrO12 Solid Electrolyte

Lithium ion conductors with garnet‐type structure are promising candidates for applications in all solid‐state lithium ion batteries, because these materials present a high chemical stability against Li metal and a rather high Li⁺ conductivity (10^?3–10^?4 S/cm). Producing densified Li‐ion conductors by lowering sintering temperature is an important issue, which can achieve high Li conductivity in garnet oxide by preventing the evaporation of lithium and a good Li‐ion conduction in grain boundary between garnet oxides. In this study, we concentrate on the use of sintering additives to enhance densification and microstructure of Li₇La₃ZrNbO₁₂ at sintering temperature of 900°C. Glasses in the LiO₂‐B₂O₃‐SiO₂‐CaO‐Al₂O₃ (LBSCA) and BaO‐B₂O₃‐SiO₂‐CaO‐Al₂O₃ (BBSCA) system with low softening temperature (<700°C) were used to modify the grain‐boundary resistance during sintering process. Lithium compounds with low melting point (<850°C) such as LiF, Li₂CO₃, and LiOH were also studied to improve the rearrangement of grains during the initial and middle stages of sintering. Among these sintering additives, LBSCA and BBSCA were proved to be better sintering additives at reducing the porosity of the pellets and improving connectivity between the grains. Glass additives produced relative densities of 85–92%, whereas those of lithium compounds were 62–77%. Li₇La₃ZrNbO₁₂ sintered with 4 wt% of LBSCA at 900°C for 10 h achieved a rather high relative density of 85% and total Li‐ion conductivity of 0.8 × 10^?4 S/cm at room temperature (30°C).     

Synthesis and characterization of new monomeric and polymeric phthalocyanines

Monomeric (M = 2Li or 2H) and polymeric (M = 2H, Zn, Cu, Co, or Ni), where M is metal or hydrogen, phthalocyanines were prepared by the tetramerization reaction of bisphthalonitrile monomer with appropriate materials. The electrical conductivities of the polymeric phthalocyanines, which were measured as gold sandwiches, were found to be 10⁻¹⁰–10⁻⁷ S/cm in vacuo and in air. The binding property of a Co‐containing polymeric phthalocyanine ( 10 ) toward alkali, alkaline‐earth, and some heavy cations was studied in tetrahydrofuran. The extraction affinity of 10 for K⁺ was found to be the highest in the heterogeneous phase extraction experiments. The disaggregation property of a Ni‐containing polymeric phthalocyanine ( 11 ) was investigated with K⁺, Na⁺, and NH₄⁺ cations. The intrinsic viscosities of all polymers were also measured by means of viscometry. All the novel compounds were characterized with elemental analysis, ultraviolet–visible, Fourier transform infrared, NMR, and mass spectrometry spectral data, and differential thermal analysis/thermogravimetry. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Blending poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile) as composite polymer electrolyte

A blend of poly(methyl methacrylate) (PMMA) and poly(styrene‐co‐acrylonitrile) (PSAN) has been evaluated as a composite polymer electrolyte by means of differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, ac impedance measurements, and linear sweep voltammetry (LSV). The blends show an interaction with the Li⁺ ions when complexed with lithium perchlorate (LiClO₄), which results in an increase in the glass‐transition temperature (T_g) of the blends. The purpose of using PSAN as another component of the blend is to improve the poor mechanical properties of PMMA‐based plasticized electrolytes. The mechanical property is further improved by introducing fumed silica as inert filler, and hence the liquid electrolyte uptake and ionic conductivity of the composite systems are increased. Room‐temperature conductivity of the order of 10^?4 S/cm has been achieved for one of the composite electrolytes made from a 1/1 blend of PSAN and PMMA containing 120% liquid electrolyte [1M LiClO₄/propylene carbonate (PC)] and 10% fumed silica. These systems also showed good compatibility with Li electrodes and sufficient electrochemical stability for safe operation in Li batteries. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1319–1328, 2001     

Crosslinked acrylic pressure‐sensitive adhesives. II. Effect of humidity on the crosslinking reaction

The effect of humidity during storage on the crosslinking reactions of isocyanate groups was investigated with attenuated total reflectance Fourier transform infrared spectroscopy with pressure‐sensitive adhesives composed of poly[ethyl acrylate‐co‐(2‐ethylhexyl acrylate)‐co‐(2‐hydroxyethyl methacrylate)] as a base resin and polyisocyanate as a crosslinker. A peak‐resolving analysis of the amide II region revealed four bands. According to an analysis of the Fourier transform infrared spectra of the model compounds, these four bands were assigned to free urethane linkages, hydrogen‐bonded urethane linkages, free urea linkages, and hydrogen‐bonded urea linkages. As expected, storage under humid conditions led to the formation of free and hydrogen‐bonded urea linkages corresponding to the promotion of isocyanate consumption. Peak resolution of the amide II region was found to be a reasonable way of monitoring urethane and urea linkages during crosslinking reactions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3039–3045, 2003     

Effects of fluoride ion on the formation of earthworm‐like mesoporous silica

In a strong acidic environment, ordered earthworm‐like mesoporous silica has been synthesized with CTAB templating and fluoride ion (F^?) as a counterion. The synthesized products were characterized by small‐angle X‐ray diffraction (SXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N₂ adsorption‐desorption isotherms, and Fourier‐transform infrared spectroscopy (FTIR). The effects of F/Si mole ratio on the morphology, surface area, and the pore size of the sample were discussed. It was found that a F/Si mole ratio at 0.083 induced the formation of 3D hexagonal mesophase, whereas higher F/Si mole ratios led to the formation of 2D hexagonal mesoporous silica, the optimum molar ratio of F/Si for the formation of delicate earthworm‐like mesoporous silica was observed at 0.250. The effects of the F/Si mole ratio, surfactant chain length, acid concentration, and shear flow on morphology were also studied.     

Preparation and characterization of novel hybrid thermoplastic poly(ether urethane)/poly(vinylidene fluoride) elastomers,and their application as solid polymer electrolytes

A comb‐like polyether, poly(3‐2‐[2‐(2‐methoxyethoxy)ethoxy]ethoxymethyl‐3′‐methyloxetane) (PMEOX), was reacted with hexamethylene diisocyanate and extended with butanediol in a one‐pot procedure to give novel thermoplastic elastomeric poly(ether urethane)s (TPEUs). The corresponding hybrid solid polymer electrolytes were fabricated through doping a mixture of TPEU and poly(vinylidene fluoride) with three kinds of lithium salts, LiClO₄, LiBF₄ and lithium trifluoromethanesulfonimide (LiTFSI), and were characterized using differential scanning calorimetry, thermogravimetric analysis and Fourier transform infrared spectroscopy. The ionic conductivity of the resulting polymer electrolytes was then assessed by means of AC impedance measurements, which reached 2.1 × 10^?4 S cm^?1 at 30 °C and 1.7 × 10^?3 S cm^?1 at 80 °C when LiTFSI was added at a ratio of O:Li = 20. These values can be further increased to 3.5 × 10^?4 S cm^?1 at 30 °C and 2.2 × 10^?3 S cm^?1 at 80 °C by introducing nanosized SiO₂ particles into the polymer electrolytes. Copyright © 2006 Society of Chemical Industry     

Nonstoichiometry and Li‐ion transport in lithium zirconate: The role of oxygen vacancies

Understanding Li‐ion migration mechanisms and enhancing Li‐ion transport in Li₂ZrO₃ (LZO) is important to its role as solid absorbent for reversible CO₂ capture at elevated temperatures, as ceramic breeder in nuclear reactors, and as electrode coating in high‐voltage lithium‐ion batteries (LIBs). Although defect engineering is an effective way to tune the properties of ceramics, the defect structure of LZO is largely unknown. This study reports the defect structure and electrical properties of undoped LZO and a series of cation‐doped LZOs: (i) depending on their charge states, cation dopants can control the oxygen vacancy concentration in doped LZOs; (ii) the doped LZOs with higher oxygen vacancy concentrations exhibit better Li⁺ conductivity, and consequently faster high‐temperature CO₂ absorption. In fact, the Fe (II)‐doped LZO shows the highest Li‐ion conductivity reported for LZOs, reaching 3.3 mS/cm at ~300°C that is more than 1 order of magnitude higher than that of the undoped LZO.     

Rare‐earth‐doped SiO2‐CaF2 glass ceramic nano‐particle with upconversion properties

Rare‐earth‐doped upconversion nano‐phosphor shows new possibilities in the field of bioimaging because of its unique properties like higher penetration depth, low signal to noise ratio (SNR), good photo stability, and zero auto fluorescence. The oxyfluoride glass system is the combination of both fluoride and oxide where fluoride host offers high optical transparency due to low phonon energy and oxide network offers high physical stability. Thus, in the present work, an attempt has been made to synthesize 1 mol% Er³⁺ doped SiO₂‐CaF₂ glass ceramic nano‐particles through sol‐gel route. The synthesized glass ceramic particles were heat treated at 4 different temperatures starting from 600°C to 900°C.The X‐ray diffraction (XRD) analysis and Transmission electron microscopy (TEM) analysis confirmed the formation of CaF₂ nano‐crystals in the matrix which is 20‐30 nm in size. The vibrational spectroscopic analysis of the glass ceramics sample has been investigated by Fourier transform infrared (FTIR) spectroscopy. The UV‐Visible‐NIR spectroscopy analysis was carried out to analyze the absorption intensity in the near infrared region. Upon 980 nm excitation, the sample shows red emission corresponds to ⁴F_9/2→⁴I_15/2 energy level transition. The prepared nano‐particles showed excellent biocompatibility when tasted on MG‐63 osteoblast cells.     

A Novel Sol–Gel Method for Large‐Scale Production of Nanopowders: Preparation of Li1.5Al0.5Ti1.5(PO4)3 as an Example

Sol–gel synthesis is an extensively used method for the preparation of nanopowders. However, complicated or expensive precursors, and the necessity of using organic solvent and/or heat assistance limit the method to laboratory‐scaled level. An aqueous‐based sol–gel method with spontaneous sol and gel formation is developed in this study. It can be applied on a large scale to synthesize compounds with Ti⁴⁺ and PO₄^3? as major components with low cost. Al‐substituted LiTi₂(PO₄)₃ (LATP) has been widely investigated as a promising candidate for solid electrolyte in Li‐ion or Li‐air batteries. Major challenges such as unsatisfactory phase purity, low sintering activity, and high production costs are faced during the fabrication of LATP. In this study, as a sample application, Li_1.5Al_0.5Ti_1.5(PO₄)₃ (LATP05) is conveniently prepared on a large scale by the novel sol–gel method with high phase purity, active densification behavior and high conductivity.     

The totally miscible in ternary hydrogen‐bonded polymer blend of poly(vinyl phenol)/phenoxy/phenolic

The individual binary polymer blends of phenolic/phenoxy, phenolic/poly(vinyl phenol) (PVPh), and phenoxy/PVPh have specific interaction through intermolecular hydrogen bonding of hydroxyl–hydroxyl group to form homogeneous miscible phase. In addition, the miscibility and hydrogen bonding behaviors of ternary hydrogen bond blends of phenolic/phenoxy/PVPh were investigated by using differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy, and optical microscopy. According to the DSC analysis, every composition of the ternary blend shows single glass transition temperature (T_g), indicating that this ternary hydrogen‐bonded blend is totally miscible. The interassociation equilibrium constant between each binary blend was calculated from the appropriate model compounds. The interassociation equilibrium constant (K_A) of each individually binary blend is higher than any self‐association equilibrium constant (K_B), resulting in the hydroxyl group tending to form interassociation hydrogen bond. Photographs of optical microscopy show this ternary blend possess lower critical solution temperature (LCST) phase diagram. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Convenient preparation of fatty ester cyclic carbonates

The cyclic carbonate moiety finds many industrial applications because of its unique chemistry and properties. Phosgene, a highly toxic and corrosive reagent, has been utilized in the past to prepare low yields of fatty ester compounds ( 1 ) that contain a five‐membered cyclic carbonate group. Herein, we show (CH₃)₄N^+?HCO₃, tetramethylammonium hydrogen carbonate (TMAHC), to react efficiently with methyl or 2‐ethylhexyl 9(10)chloro‐10(9)‐hydroxyoctadecanoate at 50–55 °C to give methyl or 2‐ethylhexyl 8‐(2‐oxo‐5‐octyl‐1,3‐dioxolan‐4‐yl)octanoate, 1a and 1b , respectively. These fatty acid ester carbonates were isolated in good yields ranging from 84% to 91% after purification by vacuum distillation. The purified fatty ester carbonate compounds were characterized by ¹H and ¹³C nuclear magnetic resonance spectroscopy, Fourier transform infrared spectroscopy, and gas chromatography‐mass spectrometry using electron impact ionization and positive chemical ionization techniques. This work demonstrates that the five‐membered cyclic carbonate ring can be effectively introduced onto the alkyl chains of fatty acid esters using fatty ester chlorohydrins and (CH₃)₄N^+?HCO₃ chemistry. The well‐known lubricating and polymeric properties of the carbonate moiety make these interesting cyclic oleochemical carbonates potential candidates for industrial lubricant, plasticizer, or polymer applications.     

Preparation and study as positive electrode of Li0·33La0·56TiO3–PANI nanocomposite

Abstract

Abstract

A new electrode material based on the Li_0·33La_0·56TiO₃–polyaniline nanocomposite is reported. This material is prepared by in situ polymerisation of aniline in the presence of Li_0·33La_0·56TiO₃ nanoparticles. The nanocomposite and its precursors are characterised by X-ray diffraction, thermogravimetry, Fourier transform infrared, TEM, SEM, electrical conductivities and electrochemical measurements. The structural and electrochemistry study reveals the existence of relatively strong interactions between the conducting polymer and the oxide particles to assure good synergy in the transport process. The dc and ac electrical conductivities and diffusion coefficient measurements at room temperature indicate that the conductivity values are several orders of magnitude higher in the composite than in the oxide alone. This behaviour determines better reversibility for Li insertion in charge–discharge cycles compared to the pristine oxide and polymer when it is used as electrode of lithium batteries.     

Preparation and performance study on P(St‐MMA)‐SiO2 doped P(VDF‐HFP) based composite polymer electrolyte

The organic–inorganic hybrid material poly(styrene‐methyl methacrylate)‐silica (P(St‐MMA )‐SiO₂) was successfully prepared by in situ polymerization confirmed by Fourier transform infrared spectroscopy and was employed to fabricate poly(vinylidene fluoride‐hexafluoropropylene) (P(VDF‐HFP )) based composite polymer electrolyte (CPE ) membrane. Desirable CPEs can be obtained by immersing the CPE membranes into 1.0 mol L^?1 LiPF₆‐EC /DMC /EMC (LiPF₆ ethylene carbonate + dimethyl carbonate + ethylmethyl carbonate) liquid electrolyte for about 0.5 h for activation. The corresponding physicochemical properties were characterized by SEM , XRD , electrochemical impedance spectroscopy and charge–discharge cycle testing measurements. The results indicate that the as‐prepared CPEs have excellent properties when the mass ratio of the hybrid P(St‐MMA )‐SiO ₂ particles to polymer matrix P(VDF‐HFP ) reaches 1:10, at which point the SEM analyses show that the as‐prepared P(St‐MMA )‐SiO ₂ particles are uniformly dispersed in the membrane and the CPE membrane presents a homogeneous surface with abundant interconnected micropores. The XRD results show that there may exist interaction forces between the P(St‐MMA )‐SiO ₂ particles and the polymer matrix, which can obviously decrease the crystallinity of the composite membrane. Moreover, the ionic conductivity at room temperature and the electrochemical working window of the CPE membrane can reach 3.146 mS cm^?1 and 4.7 V, respectively. The assembled LiCoO₂/CPE /Li coin cell with the CPE presents excellent charge–discharge and C ‐rate performance, which indicates that P(St‐MMA )‐SiO ₂ hybrid material is a promising additive for the P(VDF‐HFP ) based CPE of the lithium ion battery. © 2016 Society of Chemical Industry     

Morphology and electrochemical and mechanical properties of polyethylene‐oxide‐based nanofibrous electrolytes applicable in lithium ion batteries

We report the synthesis of all‐solid‐state polymeric electrolytes based on electrospun nanofibers. These nanofibers are composed of polyethylene oxide (PEO) as the matrix, lithium perchlorate (LiClO₄) as the lithium salt and propylene carbonate (PC) as the plasticizer. The effects of the PEO, LiClO₄ and PC ratios on the morphological, mechanical and electrochemical characteristics were investigated using the response surface method (RSM) and analysis of variance test. The prepared nanofibrous electrolytes were characterized using SEM, Fourier transform infrared, XRD and DSC analyses. Conductivity measurements and tensile tests were conducted on the prepared electrolytes. The results show that the average diameter of the nanofibers decreased on reduction of the PEO concentration and addition of PC and LiClO₄. Fourier transport infrared analysis confirmed the complexation between PEO and the additives. The highest conductivity was 0.05 mS cm^?1 at room temperature for the nanofibrous electrolyte with the lowest PEO concentration and the highest ratio of LiClO₄. The optimum nanofibrous electrolyte showed stable cycling over 30 cycles. The conductivity of a polymer film electrolyte was 29 times lower than that of the prepared nanofibrous electrolyte with similar chemical composition. Furthermore, significant fading in mechanical properties was observed on addition of the PC plasticizer. The results obtained imply that further optimization might lead to practical uses of nanofibrous electrolytes in lithium ion batteries. © 2019 Society of Chemical Industry     

Adsorption behavior of fluoride ions using a titanium hydroxide-derived adsorbent

The removal behavior of fluoride ions was examined in aqueous sodium fluoride solutions using a titanium hydroxide-derived adsorbent. The adsorbent was prepared from titanium oxysulfate (TiOSO₄·xH₂O) solution, and was characterized by X-ray diffraction, scanning electron microscopy, thermogravimetry-differential thermal analysis, Fourier transform infrared spectrum and specific surface area. Batchwise adsorption test of prepared adsorbent was carried out in aqueous sodium fluoride solutions and real wastewater containing fluoride ion. The absorbent was the amorphous material, which had different morphology to the raw material, titanium oxysulfate, and the specific surface area of the adsorbent (96.8 m²/g) was 200 times higher than that of raw material (0.5 m²/g). Adsorption of fluoride on the adsorbent was saturated within 30 min in the solution with 200 mg/L of fluoride ions, together with increasing pH of the solution, due to ion exchange between fluoride ions in the solution and hydroxide ions in the adsorbent. Fluoride ions were adsorbed even in at a low fluoride concentration of 5 mg/L; and were selectively adsorbed in the solution containing a high concentration of chloride, nitrate and sulfate ions. The adsorbent can remove fluoride below permitted level (< 0.8 mg/L) from real wastewaters containing various substances. The maximum adsorption of fluoride on the adsorbent could be obtained in the solution at about pH 3. After fluoride adsorption, fluoride ions were easily desorbed using a high pH solution, completely regenerating for further removal process at acidic pH. The capacity for fluoride ion adsorption was almost unchanged three times after repeat adsorption and desorption. The equilibrium adsorption capacity of the adsorbent used for fluoride ion at pH 3 was measured, extrapolated using Langmuir and Freundlich isotherm models, and experimental data are found to fit Freundlich than Langmuir. The prepared adsorbent is expected to be a new inorganic ion exchanger for the removal and recovery of fluoride ions from wastewater.     

Ionic interactions and transport mechanism in polyurethane electrolytes

Alternating current (AC) impedance, Fourier transform (FT)–Raman, and Fourier transform infrared (FTIR) have been conducted on solutions of poly(ethylene oxide)_(MW=1000)–urethane electrolytes commingled with LiCF₃SO₃ as the function of temperature and salt concentration. From the analysis of the Vs(SO₃) vibration, the ionic concentration of salt in various chemical environments can be calculated approximately. The spectroscopic evidence was found for the redissociated ion pairs, and ionic congeries increased with increasing temperature. AC impedance measurements is used to calculate the ionic diffusion coefficient (D_i). Investigated the various concentrations (from O/Li = 4 ～ 20) at the different temperature (40 ～ 120°C), We found that the calculated values (D_i) with the Nernst–Einstein equation are higher than the direct measurement. The discrepancy increases with the increase of temperature. A good correlation between the conductivity and the ionic redissociation is determined from the Vs(SO₃) vibration band. The fraction of the “free” ion significantly corresponds to the revised Nernst–Einstein equation by using the Nernst–Einstein relation and compared with those direct measurement. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 785–790, 2002     

Structure and morphology of solution blended poly(vinylidene fluoride)/montmorillonite nanocomposites

Nanocomposites based on poly(vinylidene fluoride) were prepared with montmorillonite by solution blending. The samples were characterized by small angle X‐ray scattering, wide angle X‐ray diffraction, Fourier transform infrared spectroscopy, and differential scanning calorimetry. Different crystallization conditions, that is, evaporation of the solvent and coprecipitation with two different antisolvents, H₂O or supercritical CO₂ (scCO₂), were tested and their influence on the resulting structure and morphology of the samples were studied. Coprecipitation with scCO₂ induced an ordinate crystalline framework and an intercalated morphology of clay, with a consequent large improvement in modulus. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Ionic end‐capping of (semi)telechelic polymers by mesogens

Two methods have been used to end‐cap linear polymer chains at one end or at both ends by a mesogen through ionic bonding. These polymers are designated as liquid‐crystalline halato(semi)telechelic polymers (LC H(S)TPs). The first method relies on the ion exchange reaction between the metal counterion of halato(semi)telechelic polymers and an ionic mesogen. The second method is based on the proton transfer from a sulfonic or carboxylic acid end‐group to a tertiary aliphatic amine, this approach being controlled by the relative pK_a values of the acidic and basic groups. If the pK_a difference is not large enough, strong hydrogen‐bonding is observed by Fourier‐transform infrared (FTIR) spectroscopy rather than proton transfer. The resulting materials have been characterized by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and small‐angle X‐ray scattering (SAXS). © 2000 Society of Chemical Industry