Replication origin of the broad host range plasmid RK2. Positioning of various motifs is critical for initiation of replication

The 393-base pair minimal origin, oriV, of plasmid RK2 contains three iterated motifs essential for initiation of replication: consensus sequences for binding the bacterial DnaA protein, DnaA boxes, which have recently been shown to bind the DnaA protein; 17-base pair direct repeats, iterons, which bind the plasmid encoded replication protein, TrfA; and A + T-rich repeated sequences, 13-mers, which serve as the initial site of helix destabilization. To investigate how the organization of the RK2 origin contributes to the mechanism of replication initiation, mutations were introduced into the minimal origin which altered the sequence and/or spacing of each particular region relative to the rest of the origin. These altered origins were analyzed for replication activity in vivo and in vitro, for localized strand opening and for DnaB helicase mediated unwinding. Mutations in the region between the iterons and the 13-mers which altered the helical phase or the intrinsic DNA curvature prevented strand opening of the origin and consequently abolished replication activity. Insertions of more or less than one helical turn between the DnaA boxes and the iterons also inactivated the replication origin. In these mutants, however, strand opening appeared normal but the levels of DnaB helicase activity were substantially reduced. These results demonstrate that correct helical phasing and intrinsic DNA curvature are critical for the formation of an open complex and that the DnaA boxes must be on the correct side of the helix to load DnaB helicase.     

Domains of DnaA protein involved in interaction with DnaB protein, and in unwinding the Escherichia coli chromosomal origin

DnaA protein of Escherichia coli is a sequence-specific DNA-binding protein required for the initiation of DNA replication from the chromosomal origin, oriC. It is also required for replication of several plasmids including pSC101, F, P-1, and R6K. A collection of monoclonal antibodies to DnaA protein has been produced and the primary epitopes recognized by them have been determined. These antibodies have also been examined for the ability to inhibit activities of DNA binding, ATP binding, unwinding of oriC, and replication of both an oriC plasmid, and an M13 single-stranded DNA with a proposed hairpin structure containing a DnaA protein-binding site. Replication of the latter DNA is dependent on DnaA protein by a mechanism termed ABC priming. These studies suggest regions of DnaA protein involved in interaction with DnaB protein, and in unwinding of oriC, or low-affinity binding of ATP.     

The FIS protein fails to block the binding of DnaA protein to oriC, the Escherichia coli chromosomal origin

The Escherichia coli chromosomal origin contains several bindings sites for factor for inversion stimulation (FIS), a protein originally identified to be required for DNA inversion by the Hin and Gin recombinases. The primary FIS binding site is close to two central DnaA boxes that are bound by DnaA protein to initiate chromosomal replication. Because of the close proximity of this FIS site to the two DnaA boxes, we performed in situ footprinting with 1, 10-phenanthroline-copper of complexes formed with FIS and DnaA protein that were separated by native gel electrophoresis. These studies show that the binding of FIS to the primary FIS site did not block the binding of DnaA protein to DnaA boxes R2 and R3. Also, FIS appeared to be bound more stably to oriC than DnaA protein, as deduced by its reduced rate of dissociation from a restriction fragment containing oriC . Under conditions in which FIS was stably bound to the primary FIS site, it did not inhibit oriC plasmid replication in reconstituted replication systems. Inhibition, observed only at high levels of FIS, was due to absorption by FIS binding of the negative superhelicity of the oriC plasmid that is essential for the initiation process.     

A dnaA box can functionally substitute for the priming signals in the oriV of the broad host-range plasmid RSF1010

The initiation of replication from oriV RSF1010, the replication origin of the broad host-range plasmid RSF1010, depends on RepA (helicase), RepB' (primase), and RepC (initiator protein), encoded by RSF1010 itself, while this initiation event in E. coli is independent of dnaA, dnaB, dnaC, and dnaG [Scherzinger et al. (1984) Proc. Natl. Acad. Sci. USA 81, 654-658; Scholz et al. (1985) in: Plasmids in Bacteria, pp. 243-259, Plenum, New York; Haring and Scherzinger (1989) in: Promiscuous Plasmids of Gram-negative Bacteria, pp. 95-124, Academic Press, London; Scherzinger et al. (1991) Nucl. Acids Res. 19, 1203-1211]. We showed in this work that a newly constructed origin consisting of an oriV RSF1010 and a DnaA protein binding site, the dnaA box, inserted near oriV RSF1010 (oriV RSF1010-dnaA box) could function without RepB' primase, but required RepA and RepC. This oriV RsF1010-dnaA box could not replicate in a dnaA46 strain in which only RepA and RepC were supplied, even at a permissive temperature. These results indicate that an inserted dnaA box can functionally substitute for the RSF1010-specific ssi signals, the RepB' dependent priming signals in oriV RSF1010, and can direct a priming pathway different from the RSF1010-specific one, but related to DnaA protein.     

The replication protein A binding site in simian virus 40 (SV40) T antigen and its role in the initial steps of SV40 DNA replication

Physical interactions of simian virus 40 (SV40) large tumor (T) antigen with cellular DNA polymerase alpha-primase (Pol/Prim) and replication protein A (RPA) appear to be responsible for multiple functional interactions among these proteins that are required for initiation of viral DNA replication at the origin, as well as during lagging-strand synthesis. In this study, we mapped an RPA binding site in T antigen (residues 164 to 249) that is embedded within the DNA binding domain of T antigen. Two monoclonal antibodies whose epitopes map within this region specifically interfered with RPA binding to T antigen but did not affect T-antigen binding to origin DNA or Pol/Prim, ATPase, or DNA helicase activity and had only a modest effect on origin DNA unwinding, suggesting that they could be used to test the functional importance of this RPA binding site in the initiation of viral DNA replication. To rule out a possible effect of these antibodies on origin DNA unwinding, we used a two-step initiation reaction in which an underwound template was first generated in the absence of primer synthesis. In the second step, primer synthesis was monitored with or without the antibodies. Alternatively, an underwound primed template was formed in the first step, and primer elongation was tested with or without antibodies in the second step. The results show that the antibodies specifically inhibited both primer synthesis and primer elongation, demonstrating that this RPA binding site in T antigen plays an essential role in both events.     

Strand specificity in the interactions of Escherichia coli primary replicative helicase DnaB protein with a replication fork

The interactions of the Escherichia coli primary replicative helicase DnaB protein, with synthetic DNA replication fork substrates, having either a single arm or both arms, have been studied using the thermodynamically rigorous fluorescence titration techniques. This approach allows us to obtain absolute stoichiometries of the formed complexes and interaction parameters without any assumptions about the relationship between the observed signal (fluorescence) and the degree of binding. Subsequently, the formation of the complexes, with different replication fork substrates, has also been characterized using the sedimentation velocity technique. To our knowledge, this is the first quantitative characterization of interactions of a hexameric helicase with replication fork substrates. In the presence of the ATP nonhydrolyzable analog, AMP-PNP, the E. coli DnaB helicase preferentially binds to the 5' arm of the single-arm fork substrate with an intrinsic affinity 6-fold higher than its affinity for the 3' arm. ATP hydrolysis is not necessary for formation of the helicase-fork complex. The asymmetric interactions are consistent with the 5' --> 3' directionality of the helicase activity of the DnaB protein and most probably reflects a preferential 5' --> 3' polarity in the helicase binding to ssDNA, with respect to the ssDNA backbone. The double-stranded part of the fork contributes little to the free energy of binding. The data indicate a rather passive role of the duplex part of the fork in the binding of the helicase. This role seems to be limited to impose steric hindrance in the formation of nonproductive complexes of the enzyme with the fork. Quantitative analysis of binding of the helicase to the two-arm fork substrate shows that two DnaB hexamers can bind to the fork, with each single hexamer associated with a single arm of the fork. In this complex, the intrinsic affinity of the DnaB hexamer for the 5' arm in a two-arm fork is not affected by the presence of the 3' arm. Moreover, the results show that the 3' arm is in a conformation which makes it easily available for the binding of the next DnaB hexamer. Because of the large size of the DnaB hexamer, the data indicate that the 3' arm is separated from the 5' arm. The separation of both arms must be to such an extent that the 3' arm can bind an additional large DnaB hexamer. These results reveal that the 3' arm is not engaged in thermodynamically stable interactions with the helicase hexamer, when it is bound in its stationary complex to the 5' arm of the fork. The significance of the these results for a mechanistic model of the hexameric DnaB helicase action is discussed.     

Effect on DNA topology by DnaA protein, the initiation factor of chromosomal DNA replication in Escherichia coli

We examined effects on supercoiled DNA topology of DnaA protein, the initiator protein of chromosomal DNA replication in Escherichia coli. The activity was identified in an analysis of plasmid DNA incubated with DnaA protein and DNA topoisomerase I. In Superose 12 gel filtration chromatography, the activity coeluted with DnaA protein. Incubation of DnaA protein with DNA at temperatures over 24 degrees C was required for this activity, which was observed with either oriC plasmid or the replicative form I of phi X174 with no DnaA box. As binding of ATP or ADP to DnaA protein prevented the activity of DnaA protein on DNA topology, binding of the adenine nucleotide may regulate the activity.     

The phiX174-type primosome promotes replisome assembly at the site of recombination in bacteriophage Mu transposition

Initiation of Escherichia coli DNA synthesis primed by homologous recombination is believed to require the phiX174-type primosome, a mobile priming apparatus assembled without the initiator protein DnaA. We show that this primosome plays an essential role in bacteriophage Mu DNA replication by transposition. Upon promoting transfer of Mu ends to target DNA, the Mu transpososome undergoes transition to a pre-replisome that permits initiation of DNA synthesis only in the presence of primosome assembly proteins PriA, DnaT, DnaB and DnaC. These assembly proteins promote the engagement of primase and DNA polymerase III holoenzyme, initiating semi-discontinuous replication preferentially at the Mu left end. The results indicate that these proteins play a crucial role in promoting replisome assembly on a recombination intermediate.     

Site-directed mutational analysis for the ATP binding of DnaA protein. Functions of two conserved amino acids (Lys-178 and Asp-235) located in the ATP-binding domain of DnaA protein in vitro and in vivo

DnaA protein, the initiator of chromosomal DNA replication in Escherichia coli, is activated by binding to ATP in vitro. We introduced site-directed mutations into two amino acids of the protein conserved among various ATP-binding proteins and examined functions of the mutated DnaA proteins, in vitro and in vivo. Both mutated DnaA proteins (Lys-178 --> Ile or Asp-235 --> Asn) lost the affinity for both ATP and ADP but did maintain binding activity for oriC. Specific activities in an oriC DNA replication system in vitro were less than one-tenth those of the wild-type protein. Assay of the generation of oriC sites sensitive to P1 nuclease, using the mutated DnaA proteins, revealed a defect in induction of the duplex opening at oriC. On the other hand, expression of each mutated DnaA protein in the temperature-sensitive dnaA46 mutant did not complement the temperature sensitivity. We suggest that Lys-178 and Asp-235 of DnaA protein are essential for the activity needed to initiate oriC DNA replication in vitro and in vivo and that ATP binding to DnaA protein is required for DNA replication-related functions.     

Characterization of the basic replicon of pCM1, a narrow-host-range plasmid from the moderate halophile Chromohalobacter marismortui

The moderately halophilic bacterium Chromohalobacter marismortui contains a 17.5-kb narrow-host-range plasmid, pCM1, which shows interesting properties for the development of cloning vectors for the genetic manipulation of this important group of extremophiles. Plasmid pCM1 can stably replicate and is maintained in most gram-negative moderate halophiles tested. The replication origin has been identified and sequenced, and the minimal pCM1 replicon has been localized to a 1,600-bp region which includes two functionally discrete regions, the oriV region and the repA gene. oriV, located on a 700-bp fragment, contains four iterons 20 bp in length adjacent to a DnaA box that is dispensable but required for efficient replication of pCM1, and it requires trans-acting functions. The repA gene, which encodes a replication protein of 289 residues, is similar to the replication proteins of other gram-negative bacteria.     

Primase couples leading- and lagging-strand DNA synthesis from oriC

Coupling of leading- and lagging-strand DNA synthesis at replication forks formed at Escherichia coli oriC has been studied in vitro using a replication system reconstituted with purified proteins. At low concentrations of primase (8 nM), the major replication products were multigenome-length molecules, generated by a rolling circle-type mechanism, and unit-length molecules. Rolling circle DNA replication was inhibited at high concentrations of primase (80 nM) and the major replication products were half-unit-length leading strands and a distinct population of short Okazaki fragments. At low primase concentrations, an asymmetric mode of DNA synthesis occurred. Each strand was made independently and initiation could occur outside of oriC. At high primase concentrations, initiation occurred exclusively at oriC and two coupled replication forks proceeded bidirectionally around the plasmid. Presumably, at low concentrations of primase, DnaB (the replication fork helicase) unwound the plasmid DNA before replication forks could form, leading to initiation at sites other than oriC. On the other hand, high concentrations of primase resulted in successful capture of the helicase leading to the formation at oriC of coupled replication forks capable of coordinated leading- and lagging-strand synthesis.     

Interviewers'' perceptions of persons-organization fit and organizational selection decisions

The Escherichia coli DnaA protein is a sequence-specific DNA binding protein that promotes the initiation of replication of the bacterial chromosome, and of several plasmids including pSC101. Twenty-eight novel missense mutations of the E. coli dnaA gene were isolated by selecting for their inability to replicate a derivative of pSC101 when contained in a lambda vector. Characterization of these as well as seven novel nonsense mutations and one in-frame deletion mutation are described here. Results suggest that E. coli DnaA protein contains four functional domains. Mutations that affect residues in the P-loop or Walker A motif thought to be involved in ATP binding identify one domain. The second domain maps to a region near the C terminus and is involved in DNA binding. The function of the third domain that maps near the N terminus is unknown but may be involved in the ability of DnaA protein to oligomerize. Two alleles encoding different truncated gene products retained the ability to promote replication from the pSC101 origin but not oriC, identifying a fourth domain dispensable for replication of pSC101 but essential for replication from the bacterial chromosomal origin, oriC.     

Expression, purification and characterization of GDP-D-mannose 4,6-dehydratase from Escherichia coli

Two separate N-terminal fragments of the 470-amino-acid Escherichia coli DnaB helicase, comprising residues 1-142 and 1-161, were expressed in E. coli. The proteins were extracted in a soluble fraction, purified, and characterised physically. In contrast to the full-length protein, which is hexameric, both fragments exist as monomers in solution, as demonstrated by sedimentation equilibrium measurements. CD spectroscopy was used to confirm that the 161-residue fragment is highly structured (mostly alpha-helical) and undergoes reversible thermal denaturation. The structurally well-defined core of the N-terminal domain of the DnaB helicase is composed of residues 24 to 136, as determined by assignment of resonances from flexible residues in NMR spectra. The 1H NMR signals of the flexible residues are located at random coil chemical shifts, and their linewidths are significantly narrower than those of the structured core, indicating complete disorder and increased mobility on the nanosecond time scale. The results support the idea of a flexible hinge region between the N- and C-terminal domains of the native hexameric DnaB protein.     

Does single-stranded DNA pass through the inner channel of the protein hexamer in the complex with the Escherichia coli DnaB Helicase? Fluorescence energy transfer studies

The structure of the complex of the Escherichia coli primary replicative helicase DnaB protein with single-stranded (ss) DNA and replication fork substrates has been examined using the fluorescence energy transfer method. In these experiments, we used the DnaB protein variant, R14C, which has arginine 14 replaced by cysteine in the small 12-kDa domain of the protein using site-directed mutagenesis. The cysteine residues have been modified with a fluorescent marker which serves as a donor or an acceptor to another fluorescence label placed in different locations on the DNA substrates. Using the multiple fluorescence donor-acceptor approach, we provide evidence that, in the complex with the enzyme, ssDNA passes through the inner channel of the DnaB hexamer. This is the first evidence of the existence of such a structure of a hexameric helicase-ssDNA complex in solution. In the stationary complex with the 5' arm of the replication fork, without ATP hydrolysis, the distance between the 5' end of the arm and the 12-kDa domains of the hexamer (R = 47 A) is the same as in the complex with the isolated ssDNA oligomer (R = 47 A) having the same length as the arm of the fork. These data indicate that both ssDNA and the 5' arm of the fork bind in the same manner to the DNA binding site. Moreover, in the complex with the helicase, the length of the ssDNA is similar to the length of the ssDNA strand in the double-stranded DNA conformation. In the stationary complex, the helicase does not invade the duplex part of the fork beyond the first 2-3 base pairs. This result corroborates the quantitative thermodynamic data which showed that the duplex part of the fork does not contribute to the free energy of binding of the enzyme to the fork. Implications of these results for the mechanism of a hexameric helicase binding to DNA are discussed.     

An ultrasonic system for diameter pulse tracking in arteries: problems and pitfalls

DnaA protein and the Escherichia coli chromosomal origin (oriC) form an initial complex at an early stage in the initiation of DNA replication. We have used electron microscopy to determine which structure among the several formed in the reconstitution of this multicomponent system is the replicatively active complex. One distinctive structure could be correlated with activity and localized to oriC, whilst several others could not. Formation of an open complex in the next stage of initiation was accompanied by the presence of a structure similar in size and shape to that of the functional initial complex. Whereas the initial complex was observed with either ATP or the ADP-forms of DnaA protein, only the ATP-form was effective in producing the open complex. Mutagenesis of several DNA sequence elements in oriC, known to be important for replication, was employed to determine the effects of these alterations on formation of the initial complex. As judged by electron microscopy and by functional assays, the region containing the four 9-mer dnaA boxes proved to be essential for the formation of the initial complex, while the three contiguous AT-rich 13-mers, known sites for opening of oriC, were not.     

The RepA protein of plasmid RSF1010 is a replicative DNA helicase

The RepA protein of the mobilizable broad host range plasmid RSF1010 has a key function in its replication. RepA is one of the smallest known helicases. The protein forms a homohexamer of 29,896-Da subunits. A variety of methods were used to analyze the quaternary structure of RepA. Gel filtration and cross-linking experiments demonstrated the hexameric structure, which was confirmed by electron microscopy and image reconstruction. These results agree with recent data obtained from RepA crystals diffracting at 3.5-A resolution (R?leke, D., Hoier, H., Bartsch, C., Umbach, P., Scherzinger, E., Lurz, R., and Saenger, W. (1997) Acta Crystallogr. Sec. D 53, 213-216). The RepA helicase has 5' --> 3' polarity. As do most true replicative helicases, RepA prefers a tailed substrate with an unpaired 3'-tail mimicking a replication fork. Optimal unwinding activity was achieved at the remarkably low pH of 5.5. In the presence of Mg2+ (Mn2+) ions, the RepA activity is fueled by ATP, dATP, GTP, and dGTP and less efficiently by CTP and dCTP. UTP and dTTP are poor effectors. Nonhydrolyzable ATP analogues, ADP, and pyrophosphate inhibit the helicase activity, whereas inorganic phosphate does not. The presence of Escherichia coli single-stranded DNA-binding protein stimulates unwinding at physiological pH 2-3-fold, whereas the RSF1010 replicon-specific primase, RepB' protein, has no effect, either in the presence or in the absence of single-stranded DNA-binding protein.