共查询到19条相似文献,搜索用时 140 毫秒
1.
仿蜡染印花丝织物面料通常是以传统的手工蜡染面料来进行图案设计及生产的,但在实际的印制过程中,仿蜡染面料印花与传统的手工蜡染在面料设计、工艺制作上均有较大差异。主要从丝织物印花中仿蜡染生产的工艺特点及如何正确合理的处理好仿蜡染面料设计纹样等方面作了探讨。 相似文献
2.
3.
将具有民间传统手工扎染工艺产品的风格与新颖磁棒印花技术相结合,通过对图案描稿、制版、印花、后处理等精心设计与研究,阐明了仿扎染色圈织物磁棒印花生产技术的可行性。 相似文献
4.
5.
本文介绍了印花织物的机械蜡染工艺,并对蜡的性能、上蜡、破蜡及蜡的回收等问题进行了探讨。通过反复试验,机械蜡染工艺基本能达到手工蜡染的效果。 相似文献
6.
7.
刺绣是中国古老的手工艺,平绣是其中最为基础的针法。通过分析传统平绣的风格特色,利用现代电脑辅助设计绣花软件进行仿真平绣图案设计,结合羊绒织物的风格特色,利用计算机辅助设备进行图案处理,通过羊绒织物数码印花,得到羊绒织物数码印花仿平绣的图案。这种将传统平绣与数码印花技术相结合的设计方法,极大的丰富了羊绒织物图案设计的创作形式,开拓了数码图案设计师的设计思路,解决了平绣与羊绒织物难结合的问题。 相似文献
8.
文章对涤棉仿色织涂料印花织物的图案设计、圆网制版、印花工艺与操作等环节进行了讨论,介绍了该织物的生产情况,获得了较好的仿色织效果。 相似文献
9.
10.
11.
12.
13.
14.
为研究3D打印服装面料中纬平针组织的结构,预测打印效果,促进针织面料数字化和智能化生产,将3D打印技术应用到针织面料设计和生产中。采用3ds Max软件,根据NURBS曲线建模的方法,结合Peirce线圈模型对纬平针组织进行三维模拟,通过模拟实现了3D打印纬平针面料的可视化,可预测打印效果。采用Repetier-Host软件,对模拟的3D打印纬平针组织模型切片,采用熔融层积成型技术,通过设置打印参数对模型切片数据进行打印,得到3D打印纬平针组织针织面料。结果表明:该打印面料的效果与模拟效果高度吻合,线圈之间嵌套关系明显,打印面料光滑平整,打印精度高,属于环境友好型面料。 相似文献
15.
介绍了宽幅涂料仿活性印花生产中涂料、粘合剂以及糊料的筛选原则,分析了烧毛、冷堆、丝光、预定形、印花以及后整理的具体操作工艺及注意事项.测试结果表示,宽幅织物涂料仿活性印花在染色牢度和柔软度方面都较好,涂料印花产品各项指标接近于活性染料印花水平. 相似文献
16.
为给多重效果组合的织物提供创新设计思路,针对提花-印花织物效果单一,且现有的提花-印花织物设计方法无法适用于剪花、烂花等特殊工艺面料设计的问题,将双层效果提花织物、提花-印花织物与剪花织物的设计方法相结合,提出具有双层效果的提花-印花-剪花织物的设计原理和方法。将目标织物分为提花层、印花层和剪花层3个部分,从图案色彩和组织结构2个方面进行设计分析,提出可行性技术方案。研究结果表明:在提花-印花的基础上,可实现具有双层效果的提花-印花-剪花结合织物的设计,并可构建起提花-印花-剪花织物的设计体系,使织物集双层、织花、印花和剪花4种效果于一体,在织物表面呈现4种静态、3种动态的丰富组合效果。 相似文献
17.
This paper presents a printing technology for the design and manufacture of interactive planar speakers. With this technology, sound emission can be easily integrated into various textiles at the design stage with minimal assembly after printing. This paper reports direct-write dispenser-printed sound-emitting smart fabrics, aimed at creative fashion and smart architecture applications opening up new opportunities in product design. Planar spiral speakers generate a membrane vibration and so emit sound when driven from an a.c. audio source if a magnet is in close proximity to the spiral. These speakers can be integrated on fabrics to form the basis of clothing in fashion applications. The speaker designs were printed on woven polyester fabric and produced a measured peak sound output level of 85 dB with a wide frequency response from 20 Hz to 20 kHz. This research demonstrates a straightforward fabrication method, based on dispenser printing, to achieve sound emission from a fabric. The fabrication process requires a processing temperature of 130 °C for 10 min which is compatible with the majority of fabrics which are used in fashion and architecture industries. This paper reports on the theory and the manufacturing technology to achieve direct-write dispenser-printed planar spiral speakers on fabrics. 相似文献
18.